Skyworks Solutions

SI2493-D-GT - 56 kbps V.92 ISOmodem | Skyworks

N.º da peça: SI2493-D-GT ✓ Ativo
3 V to 3.6 V Vdss 24-TSSOP (0.173 in, 4.40 mm width) Package On-chip program ROM Memory
MOQ: 1 |

SI2493-D-GT Visão geral

Skyworks Solutions SI2493-D-GT is a 56 kbps V.92 ISOmodem system-side modem controller designed for full-duplex data over the Public Switched Telephone Network. The device supports ITU V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92 modem formats, as well as Bell 103 and Bell 212A formats. It is supplied in a 24-pin TSSOP package.

An ISOmodem is a single-chip implementation of a modem and its associated interface functions. The system-side Si2493 combines data modulation and demodulation with the telephone-line interface required by a global DAA design. This makes it part of the broader modem controller and processor IC category, used to connect embedded equipment to legacy PSTN services without requiring a separate external data-access arrangement.

Revision D of the Si2493 supports conventional modem data formats with connection rates reaching 56,000 bps. Its listed protocol set includes V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92, together with Bell 103 and Bell 212A. Additional listed capabilities include automatic rate negotiation, V.44, V.42, V.42bis, MNP2-5, PCM upstream and V.92 Quick Connect. These functions allow the controller to negotiate compatible operating modes with the connected telephone network.

The device includes on-chip program ROM containing the firmware required for the documented features. It also includes on-chip program RAM for minor changes to ROM firmware. This combination provides a self-contained modem solution and offers a degree of field-update flexibility, while the exact RAM-based modification process remains subject to the manufacturer's programming and system-integration guidance.

Typical implementations use the Si2493 in telephone terminal equipment, data communication devices and embedded PSTN access products. The 24-pin TSSOP SI2493-D-GT is appropriate when a design specifically requires this package, while the Si2493 family also includes a 16-pin SOIC option. The 16-pin version is footprint-compatible with the Si2401 ISOmodem and is identified by the manufacturer as the recommended option for most applications.

Circuit design should follow the complete Si2493 datasheet for clocking, line-interface implementation, power sequencing and external component selection. Designers should also allow for the global DAA requirements of the target country, including the applicable line-interface and regulatory network requirements. The Si2493 handles the modem protocol layer, but line termination, protection, isolation and PSTN approval remain separate system-level design tasks.

This product page combines the manufacturer's protocol and package information with practical application guidance, lifecycle-oriented sourcing information and a strict review of drop-in alternatives. It is intended to help engineers distinguish the 24-pin system-side implementation from the 16-pin SOIC family member and plan a compliant, testable PSTN interface without assuming that a different package or electrically unrelated controller can serve as a direct replacement.

Alternativas drop-in para SI2493-D-GT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com SI2493-D-GT (mesmo formato e footprint) — diferindo em Maximum Data Rate, Package.

Skyworks Solutions
Maximum Data Rate: 56 kbps
Package: 24-TSSOP
Comparar com SI2493-D-GT →

SI2493-E-GT

✅ Drop-In ⚠️ Especificações não verificadas
📦 24-TSSOP (0.173 in, 4.40 mm width)
Later same-family revision with 0 kbps difference in the 56 kbps maximum rate and 0 V difference in the 3.0 V to 3.6 V supply range; verify firmware revision details

📋 Alternativa de referência (fora do catálogo)

SI2493-C-GT

✅ Drop-In ⚠️ Especificações não verificadas
Skyworks Solutions
📦 24-TSSOP (0.173 in, 4.40 mm width)
V.92 ISOmodem system-side IC · 56 kbps · V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92 · Bell 103, Bell 212A · 24-TSSOP · 4.40 mm · 0.173 inch · Tube

Consulte o preço

Ver ficha técnica →

SI2493-B-GT

✅ Drop-In ⚠️ Especificações não verificadas
📦 24-TSSOP (0.173 in, 4.40 mm width)
Earlier same-family revision with 0 kbps difference in the 56 kbps maximum rate and 0 V difference in the 3.0 V to 3.6 V supply range; verify firmware revision details

📋 Alternativa de referência (fora do catálogo)

SI2493-D-GTR

✅ Drop-In
📦 24-TSSOP (0.173 in, 4.40 mm width)
Same 24-TSSOP footprint and 0 V difference in the 3.0 V to 3.6 V supply range; ordering suffix differs for packing configuration

📋 Alternativa de referência (fora do catálogo)

SI2493-D-GTL

✅ Drop-In ⚠️ Especificações não verificadas
📦 24-TSSOP (0.173 in, 4.40 mm width)
Same 24-TSSOP footprint and 0 V difference in the 3.0 V to 3.6 V supply range; ordering suffix differs for packing configuration

📋 Alternativa de referência (fora do catálogo)

SI2493-D-GT Especificações

Device Type V.92 ISOmodem system-side modem controller
Maximum Data Rate 56,000 bps
Line Interface Full-duplex over the Public Switched Telephone Network
ITU-T Modem Formats V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92
Bell Modem Formats Bell 103 and Bell 212A
Error-Control Formats V.42, V.42bis and V.44
Rate Negotiation Automatic rate negotiation
Message Passing MNP2-5
Upstream PCM Support V.92 PCM upstream
Connection Establishment V.92 Quick Connect
Program Memory On-chip program ROM
Program RAM On-chip program RAM for minor firmware changes
Tensão de alimentação 3 V to 3.6 V
Encapsulamento 24-TSSOP (0.173 in, 4.40 mm width)
Tipo de montagem Surface mount
Silicon Revision Revision D

Guia de Configuração de Pinos do SI2493-D-GT 24-tssop (0.173 in, 4.40 mm width)

Configuração de pinos para SI2493-D-GT (pacote 24-tssop (0.173 in, 4.40 mm width)). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 24-tssop (0.173 in, 4.40 mm width) para SI2493-D-GT

Nenhum dado detalhado de pinagem disponível para SI2493-D-GT.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

SI2493-D-GT é adequado para 6 aplicaçãos: 56 kbps PSTN Data Terminal, Global DAA Telephone Equipment, Remote Diagnostics and Management Terminal, Embedded Telephone Access Box, Point-to-Point Data Communication, Legacy Equipment Upgrade and Retrofit.

🌐

56 kbps PSTN Data Terminal

The SI2493-D-GT fits a legacy telephone-network data terminal requiring full-duplex operation at rates up to 56,000 bps. Its V.92 support, automatic rate negotiation and V.92 Quick Connect provide the modem functions required to establish a connection with compatible PSTN equipment. The 24-pin TSSOP also allows the modem controller to be placed on a conventional surface-mount PCB. The external line interface still requires appropriate termination, protection and isolation, so the Si2493 handles modem communication while the surrounding telephone-network design remains a separate engineering responsibility.

📱

Global DAA Telephone Equipment

A global DAA implementation using the SI2493-D-GT can combine country-independent modem behavior with the line-network circuitry required in each target region. The device supports V.21 through V.92, Bell 103 and Bell 212A formats, enabling broad compatibility with analog PSTN services. Because DAA approval is regional, the controller should be paired with the exact external components, isolation method and interface topology identified by Skyworks for the intended country. This division of responsibility helps keep protocol handling inside the Si2493 while leaving regulatory line access in the certified analog interface.

🖥️

Remote Diagnostics and Management Terminal

The SI2493-D-GT can support a remote diagnostics or management terminal that must connect through an analog telephone line rather than an Ethernet or wireless network. Its 56,000 bps maximum rate is suitable for command exchange, configuration transfer and compact firmware or log transfers. Automatic rate negotiation allows the modem session to select a compatible rate, while V.42, V.42bis and V.44 capabilities provide the listed error-control functions. Product developers should evaluate session timeout, error recovery and line-quality behavior in the target network rather than assuming 56 kbps is available on every connection.

🏭

Embedded Telephone Access Box

An embedded telephone access box can use the SI2493-D-GT as its system-side modem controller when the product must retain PSTN compatibility. The on-chip program ROM provides firmware for the documented modem features, and the on-chip program RAM allows minor firmware changes. That integration reduces the need for a separate host to perform low-level modulation tasks. A practical design still needs a suitable processor interface, clock arrangement and external global DAA network. The 3 V to 3.6 V supply range should be reconciled with the rest of the box power tree and sequencing requirements.

🔧

Point-to-Point Data Communication

The SI2493-D-GT is suitable for point-to-point communication between two installations connected through the PSTN. Its support for V.32, V.34, V.90 and V.92 provides multiple modem operating modes, while automatic rate negotiation helps establish a usable session over variable line conditions. For long-distance or industrial links, pair the modem with an error-control protocol such as the listed V.42bis or V.44 function and validate the complete path under worst-case line noise. The component supports the modem side of the connection; the selected PSTN carrier determines final throughput and availability.

🏗️

Legacy Equipment Upgrade and Retrofit

The SI2493-D-GT can modernize a legacy device that previously depended on a discrete or older modem implementation while preserving a 24-pin TSSOP-based board architecture. Its modem engine supports legacy Bell and ITU formats as well as V.92, making it useful where compatibility spans older equipment generations. The on-chip ROM and RAM simplify the implementation of the documented modem firmware. Before retrofitting, compare signal names, voltage levels, clocking, interrupt behavior and line-interface connections against the previous controller, since protocol compatibility alone does not establish pin-compatible replacement.

What is the Skyworks SI2493-D-GT?
The Skyworks SI2493-D-GT is a 56 kbps V.92 ISOmodem system-side controller for full-duplex data over the Public Switched Telephone Network. According to the Skyworks Si2493 datasheet, the device supports ITU V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92 formats, plus Bell 103 and Bell 212A. It is packaged in a 24-pin TSSOP and integrates modem firmware in on-chip ROM.
What is the maximum data rate of the SI2493-D-GT?
The SI2493-D-GT supports a maximum connection rate of 56,000 bps. The manufacturer identifies the device as a complete ITU V.92-compliant modem that provides conventional data formats over the Public Switched Telephone Network. Its feature set also includes automatic rate negotiation and V.92 Quick Connect, allowing the system to establish and select supported communications modes automatically.
Which modem protocols does SI2493-D-GT support?
The SI2493-D-GT supports ITU-T V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92, along with Bell 103 and Bell 212A. The manufacturer also lists V.42, V.42bis and V.44 error-control functions, MNP2-5 message passing, PCM upstream support and V.92 Quick Connect. These capabilities make the device suitable for legacy PSTN modem implementations using standard analog telephone formats.
Where can I download the SI2493-D-GT datasheet PDF?
The SI2493-D-GT datasheet PDF is available from Skyworks through the official Si2493D data-sheet URL on this page. The document describes the 56 kbps V.92 ISOmodem, supported modem formats, global DAA operation, package options and device functionality. Use the manufacturer PDF for pin assignments, electrical characteristics, timing information and application-circuit details relevant to the 24-pin TSSOP implementation.
Where can I find the SI2493-D-GT pinout?
The SI2493-D-GT pin assignments are located in the pin-description and package-drawing sections of the Skyworks Si2493D datasheet. The selected SI2493-D-GT configuration uses a 24-pin TSSOP package. Confirm every signal, supply reference and exposed connection against the Revision D datasheet before laying out a PCB or assigning nets, particularly for the global DAA and clock circuitry.
Can SI2493-D-GT be used for a 56 kbps PSTN modem?
Yes, the SI2493-D-GT is designed for a full-duplex 56 kbps modem connection over the Public Switched Telephone Network. Its V.92 support reaches 56,000 bps, while automatic rate negotiation and V.92 Quick Connect help the modem select an appropriate connection mode. The complete telephone interface still requires the external line-network components and regulatory approvals specified for the deployment region.
What is the difference between the 24-pin TSSOP and 16-pin SOIC Si2493 options?
The SI2493-D-GT is the 24-pin TSSOP version, while the Si2493 family also includes a 16-pin SOIC option. According to the manufacturer datasheet, the 16-pin version is footprint-compatible with the Si2401 ISOmodem and is recommended for most applications. The present 24-pin device should therefore be selected when its specific package, signal assignment and system requirements match the intended design.
When should I choose SI2493-D-GT instead of the 16-pin SOIC Si2493?
Choose SI2493-D-GT when the PCB design specifically requires the 24-pin TSSOP implementation or depends on the signal allocation of that package. The Skyworks datasheet identifies the 16-pin SOIC version as footprint-compatible with the Si2401 and recommended for most applications, so the TSSOP version is primarily appropriate where its package or architecture matches an existing design. Check the complete pin lists before making a substitution.
What can replace SI2493-D-GT?
No verified pin-compatible drop-in replacement for the SI2493-D-GT was identified. The related SI2493-D-GTR ordering code represents a different package or packing configuration and should not be treated as a separate drop-in alternative. The 16-pin SOIC Si2493 is not drop-in compatible because its footprint and pin count differ. Use the manufacturer datasheet to determine whether a redesign is required instead of assuming a direct replacement.
Is the SI2493-D-GT the same as the 16-pin SOIC Si2493?
No, the SI2493-D-GT and the 16-pin SOIC Si2493 are not the same drop-in package. The SI2493-D-GT uses a 24-pin TSSOP, while the alternative family member uses a 16-pin SOIC. Although both belong to the Si2493 ISOmodem family, their footprints and pin counts differ, so moving between them requires a PCB-level design review rather than a component-only substitution.
SI2493-D-GT versus SI2493-D-GTR: which ordering code fits the design?
The SI2493-D-GT is the cataloged 24-pin TSSOP target used in this product data, while SI2493-D-GTR is a related ordering code associated with the same device family and 24-pin TSSOP construction. The final suffix interpretation, reel or tube packing and procurement packaging should be confirmed from the current manufacturer or distributor ordering information. Do not make a board-design change based on the suffix alone.
Where can I buy SI2493-D-GT online?
Use the Request a Quote form on this page to request SI2493-D-GT pricing, current availability, minimum order quantity and lead time. The form is the appropriate commercial channel for a quote-based electronic-component purchase and can also capture your required package quantity. Do not rely on an outdated cached stock indication when scheduling production or allocating a build.
What is the price of SI2493-D-GT?
Use the Request a Quote form on this page for the current SI2493-D-GT price and quantity breaks. Commercial terms can change with volume, package configuration, market conditions and component availability, so a static figure is not appropriate for procurement. Include your annual usage, forecast horizon and required delivery schedule when requesting the quotation.
What is the lead time and stock status for SI2493-D-GT?
Request current lead time, stock status and minimum order quantity through the Request a Quote form on this page. For production planning, ask for the manufacturer-supported ordering code, delivery schedule and any lifecycle or supply-notification information applicable to the selected package configuration. These commercial details should be confirmed at the time of the purchase order rather than inferred from a distributor listing.
What are the key specifications engineers should know about SI2493-D-GT?
The SI2493-D-GT is a 3 V to 3.6 V, 56,000 bps V.92 ISOmodem system-side controller in a 24-pin TSSOP. Its documented protocol set includes V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103 and Bell 212A. On-chip program ROM supplies the listed firmware, while on-chip program RAM accommodates minor firmware changes. The Skyworks Si2493D datasheet is the controlling technical reference.
Does the SI2493-D-GT include a global DAA?
The SI2493-D-GT is described by Skyworks as a V.92 ISOmodem with Global DAA, meaning it supports a country-independent data-access arrangement when paired with the required external telephone-line circuitry. DAA implementation remains subject to the target country's network requirements. Follow the manufacturer datasheet and the applicable national PSTN approval process when selecting line components, protection and isolation arrangements.
Is SI2493-D-GT suitable for industrial or automotive equipment?
The SI2493-D-GT is suitable when the equipment requires a dedicated 56 kbps PSTN modem interface, but qualification must be matched to the end application. The identified documentation does not establish AEC-Q100 automotive qualification, industrial temperature coverage or a specific lead-free declaration. Request those production requirements before release, and use the Request a Quote form for lifecycle, stock and delivery information.

Dados de referência de engenharia para SI2493-D-GT — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the SI2493-D-GT when a new or existing design specifically uses a 24-pin TSSOP footprint and requires a complete 56 kbps V.92 system-side modem with broad legacy PSTN support. It is especially relevant when the product must support ITU V.21 through V.92 formats, Bell 103 and Bell 212A, automatic rate negotiation and country-independent global DAA behavior. Do not choose it merely because another Si2493 product provides similar protocol functions: the family also includes a 16-pin SOIC version, and the manufacturer identifies that smaller-footprint option as recommended for most applications. A 16-pin SOIC design generally requires a different footprint and pin assignment rather than a drop-in substitution. The SI2493-D-GT is preferable when its package matches the PCB and when on-chip ROM plus program RAM satisfy the firmware strategy. Before release, confirm national PSTN approval, external line-interface components, clocking, supply sequencing and operating-temperature requirements.

Comparação com alternativas

Parâmetro Este produto
Brand Skyworks Solutions Inc.
Package 24-TSSOP (0.173 in, 4.40 mm width)
Device Type V.92 ISOmodem system-side modem controller
Maximum Data Rate 56,000 bps
Supply Voltage 3 V to 3.6 V
PSTN Operation Full-duplex over the Public Switched Telephone Network
ITU-T Formats V.21, V.22, V.23, V.29, V.32, V.34, V.90 and V.92
Bell Formats Bell 103 and Bell 212A
Program Memory On-chip program ROM and on-chip program RAM

Principais diferenciais

  • Provides a complete V.92 system-side modem function (vs 16-pin SOIC Si2493)
  • Supports broad legacy PSTN modem compatibility (vs Generic single-protocol modem controller)
  • Integrates modem firmware and RAM resources (vs Controller Requiring External ROM and RAM)

Notas de projeto

Assign the PCB using the Revision D Si2493 datasheet pin table rather than inferring signals from the SOIC-family version. Keep the 24-pin TSSOP footprint intact for the SI2493-D-GT, verify the pin-one orientation against the package drawing, and provide short ground returns around the device. Because this modem connects to a telephone network, isolate sensitive line-interface routing from logic and clock circuitry to prevent coupled noise from affecting controller operation.

Design the 3 V to 3.6 V supply rail with low noise and adequate decoupling at the Si2493 supply pins. Place the required bulk and high-frequency bypass capacitors close to their associated pins, and route high-current return paths away from modem clock and data lines. Confirm capacitor voltage ratings, DC-bias characteristics and regulator stability using the values and conditions specified in the Skyworks Si2493D datasheet, since substitutions based only on nominal capacitance can alter behavior.

Do not treat the 16-pin SOIC Si2493 as a pin-compatible substitute for the 24-pin TSSOP SI2493-D-GT. The package pin count, footprint and assignments differ. Also do not assume that the global DAA feature eliminates country-specific telephone-network approval. Validate the complete line interface, isolation and protection design for each deployment region, and preserve the clock, firmware and external-component requirements described in the manufacturer documentation.

Route clocks and modem interfaces away from noisy line-driver and switching-regulator nodes. Use a continuous ground reference beneath and around the controller, minimize long high-speed traces and terminate interfaces according to the Si2493 application circuit. If the design combines the modem controller with a switching supply or processor, test conducted and radiated emissions early because PSTN equipment must balance functional margin, electromagnetic compatibility and regional line-access requirements.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The identified Si2493 documentation describes modem formats, firmware resources and package options but does not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals status for this ordering code.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

SI2493-D-GT datasheet SI2493-D-GT datasheet pdf SI2493-D-GT pinout SI2493-D-GT specifications Skyworks SI2493-D-GT SI2493-D-GT 24-TSSOP SI2493-D-GT 56 kbps modem SI2493-D-GT V.92 modem SI2493-D-GT PSTN application SI2493-D-GT equivalent SI2493-D-GT replacement SI2493-D-GT cross reference SI2493-D-GT price SI2493-D-GT stock where to buy SI2493-D-GT

Componentes & termos relacionados

Skyworks Solutions Inc. SI2493-D-GT Si2493 Revision D V.92 ISOmodem modem controller interface IC semiconductor system-side modem global DAA Public Switched Telephone Network PSTN 56 kbps automatic rate negotiation V.92 Quick Connect V.42 V.42bis V.44 MNP2-5 on-chip program ROM on-chip program RAM 24-pin TSSOP TSSOP family surface-mount package SMD ITU-T modem formats Bell modem formats
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ