Texas Instruments

SN75114D - Dual Differential Line Driver | Texas Instruments

MPN: SN75114D ✓ نشط
4.75 V to 5.25 V Vdss 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

SN75114D نظرة عامة

Texas Instruments SN75114D is a dual differential line driver interface IC designed for digital communication and TTL-compatible signal conditioning. The device operates from a 4.75 V to 5.25 V supply and is specified for a 0 °C to +70 °C commercial temperature range. It is packaged in a 16-pin SOIC package. According to the Texas Instruments product information, the output stages are similar to TTL totem-pole outputs and include sink outputs YS and ZS with corresponding active pullup terminals YP and ZP on adjacent package pins. This arrangement provides a flexible interface for systems that require differential drive, phase splitting, or TTL-compatible expansion.

A differential line driver is an interface circuit that converts logic signals into stronger, balanced outputs suitable for driving transmission lines or connecting digital equipment over longer interconnects. SN75114D provides two driver channels in one package, allowing a system designer to drive two related signals while reducing board area and component count. The device can also operate as a TTL expander or phase splitter because its output levels are compatible with TTL logic.

The SN75114D is identified as a 2/0 driver, meaning it contains two driver outputs and no corresponding receiver inputs. The 16-pin SOIC package provides a conventional surface-mount footprint and is suitable for industrial control, communications, instrumentation, and legacy computer-interface equipment. Its 5 V supply requirement places it among standard TTL-compatible interface components, allowing it to share a regulated rail with compatible digital logic.

The key design consideration is understanding the output-stage architecture. The YS and ZS pins are sink outputs, while YP and ZP provide the corresponding active pullup paths. Board routing should preserve the intended pairing of driver outputs and pullup terminals, and unused inputs or outputs should be handled according to the manufacturer pin descriptions and recommended circuit arrangements. Decoupling and transmission-line routing should follow the datasheet's application guidance to prevent ringing, excessive current, or logic-level errors.

Typical uses include differential digital buses, phase-splitting arrangements, TTL logic interfacing, and clock or control-signal distribution where two outputs are required. This product page combines the manufacturer's device description, package information, operating limits, cross-reference results, and practical interface-design guidance for engineers evaluating the SN75114D.

بدائل مباشرة لـ SN75114D — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

SN75114DG4

✅ بديل مباشر
📦 16-pin SOIC
Same 16-pin SOIC package and SN75114 device family; terminal and package compatibility is indicated by the cross-reference listing, while exact temperature and order-code details require datasheet review

📋 بديل مرجعي (غير موجود في الكتالوج)

SN75115N

✅ بديل مباشر
📦 16-pin SOIC
Same 16-pin SOIC footprint with consistent terminals according to the cross-reference result; exact output and temperature specifications require comparison with the manufacturer datasheet

📋 بديل مرجعي (غير موجود في الكتالوج)

SN75115NE4

✅ بديل مباشر
📦 16-pin SOIC
Same 16-pin SOIC footprint with consistent terminals according to the cross-reference result; the N suffix identifies a different order-code configuration whose grade must be checked

📋 بديل مرجعي (غير موجود في الكتالوج)

SN75114D المواصفات

Product Type Dual differential line driver
Number of Driver Channels 2
Supply Voltage Range 4.75 V to 5.25 V
نطاق درجة حرارة التشغيل 0 °C to +70 °C
العلبة 16-pin SOIC
Package Code SOP
Terminal Form Gull wing
Number of Terminals 16
Output Stage Type TTL-compatible totem-pole outputs with sink and active pullup terminals
Sink Output Pins YS and ZS
Active Pullup Pins YP and ZP
Additional Use TTL expander or phase splitter
نوع التركيب Surface mount

تكوين أطراف SN75114D

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
دبوس 1 1A — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 2 1B — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 3 1C — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 4 1D — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 5 1E — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 6 1F — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 7 2A — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 8 2B — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 9 2C — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 10 2D — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 11 2E — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 12 2F — Driver input or output terminal; exact function per manufacturer datasheet
دبوس 13 GND — Ground
دبوس 14 VCC — Power supply
دبوس 15 YP — Active pullup terminal for one driver channel
دبوس 16 ZP — Active pullup terminal for the other driver channel

التطبيقات النموذجية

SN75114D مناسب لـ 6 التطبيقs: Differential Digital Bus Interface, TTL Logic Expansion, Phase-Splitting Circuit, Industrial Control Signal Distribution, Test and Measurement Equipment, Legacy Computer Peripheral Interface.

🌐

Differential Digital Bus Interface

The SN75114D fits applications requiring two coordinated digital drive signals because it contains two differential line-driver channels in a 16-pin SOIC package. The YS and ZS sink outputs and YP and ZP active pullup terminals allow the board designer to select the appropriate output arrangement for a TTL-compatible interface. Operating from 4.75 V to 5.25 V, the device integrates naturally into 5 V digital systems, while its 2/0 organization avoids unused receiver circuitry. Signal integrity should be checked with the intended line length, load capacitance, and pullup configuration in the manufacturer application guidance.

🖥️

TTL Logic Expansion

The SN75114D can extend TTL-compatible digital drive capability because its output stages use TTL-compatible levels and provide accessible sink and active-pullup paths. Two driver channels allow a controller to energize additional logic, relay, or interface signals without duplicating single-channel circuitry. The 4.75 V to 5.25 V operating range supports a conventional 5 V logic rail, and the 16-pin SOIC footprint simplifies placement beside the host processor. Confirm output current, fanout, and timing margins for every connected load before treating the driver as a general-purpose logic replacement.

⚡

Phase-Splitting Circuit

SN75114D is suitable for phase-splitting duties because Texas Instruments identifies it as usable with TTL-compatible output levels and exposes both sink outputs and corresponding active pullup terminals. A phase splitter can generate two logically related drive paths from one system function, helping distribute clock or control transitions to downstream logic. The dual-driver architecture reduces the need for separate packages, while the compact 16-pin SOIC preserves board area. Use the manufacturer's application examples to establish the correct relationship between YS, ZS, YP, ZP, and the receiving logic, and validate edge behavior at the actual load.

🏭

Industrial Control Signal Distribution

The SN75114D can distribute low-speed control signals within compact industrial equipment when the operating environment remains inside its 0 °C to +70 °C commercial range. Its two channels provide matched driver resources for machine-control logic, while TTL-compatible outputs simplify interfacing with legacy digital controllers. The 5 V supply range and 16-pin SOIC package support conventional embedded-control boards. For motor drives, safety loops, or factory equipment with severe electrical noise, add appropriate isolation and surge protection; the line driver itself should remain focused on compatible digital signaling.

🔧

Test and Measurement Equipment

The SN75114D is applicable to legacy test and measurement instruments that require TTL-compatible differential drive or phase generation for control, clock, or stimulus circuits. Its two driver channels can support instrument sequencing where a central controller must deliver coordinated signals to peripheral logic. The 16-pin SOIC package simplifies retrofitting to an existing board, and the 4.75 V to 5.25 V supply range aligns with established 5 V instrument electronics. Check output loading and transition requirements carefully because the external cable, fixture, and input capacitance can materially affect signal integrity.

💻

Legacy Computer Peripheral Interface

SN75114D supports legacy computer-peripheral and communication-interface boards that use TTL-compatible differential drive signals. The dual-driver arrangement can connect two lines from a host interface while avoiding the board space required by separate single drivers. Its surface-mount 16-pin SOIC package is useful for compact adapter and embedded-controller designs, while its driver-only 2/0 configuration fits transmit-side circuitry. System designers should verify signal polarity, pullup usage, receiver thresholds, and cable termination against the original equipment schematic before replacing an installed device.

ملخص المنتجات الموصى بها

SN75114DG4 Same-family 16-pin SOIC option يُستخدم في: Differential Digital Bus Interface, TTL Logic Expansion, Phase-Splitting Circuit, Industrial Control Signal Distribution, Test and Measurement Equipment, Legacy Computer Peripheral Interface SN75115N Pin-compatible line-driver alternative يُستخدم في: Differential Digital Bus Interface, TTL Logic Expansion, Phase-Splitting Circuit, Test and Measurement Equipment SN75115NE4 Pin-compatible order-code alternative يُستخدم في: Industrial Control Signal Distribution, Legacy Computer Peripheral Interface
What is the SN75114D used for?
The SN75114D is a dual differential line driver interface IC used to drive digital signals, split phases, or interface TTL-compatible logic. Texas Instruments describes the output stages as TTL-compatible totem-pole outputs with sink outputs YS and ZS and active pullup terminals YP and ZP. The device contains two driver channels, operates from 4.75 V to 5.25 V, and is packaged in a 16-pin SOIC.
What is the operating voltage of SN75114D?
The SN75114D operates from a 4.75 V to 5.25 V supply. This operating range appears in the Texas Instruments SN75114D product listing and is consistent with its TTL-compatible output architecture. The device is intended for a 5 V digital interface environment; use the manufacturer's recommended decoupling and output-loading guidance when placing it next to high-speed logic.
What is the operating temperature range of SN75114D?
The SN75114D is specified for a 0 °C to +70 °C commercial operating temperature range. The Texas Instruments product listing identifies the SN75114D as a dual differential line driver and lists this temperature range for the device. If the surrounding equipment must operate outside commercial conditions, select a qualified industrial or extended-temperature replacement rather than assuming the SN75114D rating covers those conditions.
Where can I download the SN75114D datasheet PDF?
The official SN75114D datasheet is available through the Texas Instruments product page at https://www.ti.com/product/SN75114. The page identifies the device as a dual differential line driver and provides the current datasheet revision and supporting technical documentation. Use the manufacturer PDF for the authoritative pin descriptions, recommended application circuits, output ratings, and electrical characteristics.
Where can I find the SN75114D pinout?
The SN75114D pinout is provided in the Texas Instruments SN75114 datasheet and product page. The package is a 16-pin SOIC with a gull-wing terminal form. The product information specifically identifies the YS and ZS sink outputs and the YP and ZP active pullup terminals. Use the datasheet pin-description table when assigning PCB nets and when checking unused or no-connect terminals.
What are the key specifications of SN75114D that engineers should know?
SN75114D key specifications include two differential driver channels, a 4.75 V to 5.25 V supply range, a 0 °C to +70 °C commercial temperature range, and a 16-pin SOIC package. Texas Instruments describes the outputs as TTL-compatible totem-pole stages with YS and ZS sinks plus YP and ZP active pullups. It is a driver-only 2/0 interface device rather than a bidirectional transceiver.
Is SN75114D a TTL-compatible interface IC?
Yes. The Texas Instruments product information states that the SN75114D output stages provide TTL-compatible output levels. The device can therefore be used with TTL logic in line-driver, phase-splitter, and TTL-expander arrangements. The exact output current, propagation delay, and logic thresholds should be taken from the SN75114 datasheet when evaluating a specific load or timing design.
Can SN75114D be used as a phase splitter?
Yes. Texas Instruments states that the SN75114D can be used as a phase splitter because its output stages provide TTL-compatible levels and expose both sink outputs and active pullup terminals. The YS and ZS outputs represent the sink-side signals, while YP and ZP are the corresponding active pullup terminals. Follow the manufacturer application diagrams when connecting the pullups and loads.
Can SN75114D be used as a TTL expander?
Yes. The SN75114D can function as a TTL expander because its output stages are TTL-compatible and provide separate sink and active-pullup terminals. This arrangement can increase the number of usable logic drive paths in a digital interface. Check the datasheet's logic-level and output-current limits before driving additional TTL loads, especially when using multiple outputs in one package.
What is the difference between SN75114D and SN75115N?
The SN75114D is a 16-pin SOIC dual differential line driver with two driver outputs and no receiver channels, while the SN75115N is identified in the cross-reference results as a pin- and package-compatible alternative. The comparison result states that the terminals and packages are consistent and that replacement does not require modification of the existing circuit. Verify the exact output behavior and temperature grade against the manufacturer datasheets before production use.
What can replace SN75114D?
The best documented drop-in candidates are SN75114DG4, SN75115N, and SN75115NE4. The available cross-reference result identifies SN75114DG4 as a 16-pin SOIC alternative and states that SN75115N and SN75115NE4 have consistent terminals and packages. For an existing board, confirm the exact pinout, supply range, output levels, and temperature requirements against the relevant manufacturer datasheet before substitution.
What is the best Texas Instruments equivalent for SN75114D?
SN75114DG4 is the closest documented Texas Instruments drop-in candidate because it is listed as a 16-pin SOIC alternative with the same SN75114 device family designation. SN75115N and SN75115NE4 are also listed by the cross-reference source as having consistent terminals and packages. The final choice should follow the required temperature grade and output specification rather than package alone.
SN75114D vs SN75115N - which is better for a TTL interface?
Choose the SN75114D when your design is specifically qualified around the SN75114 family's dual differential driver architecture and commercial 0 °C to +70 °C range. Choose SN75115N when the cross-reference description's pin-compatible implementation matches the source design and its datasheet provides the required electrical ratings. Both are 16-pin SOIC devices in the relevant cross-reference result, so the decisive factors are exact output behavior, temperature grade, and qualification.
When should I choose SN75114D over SN75115N?
Choose SN75114D when the circuit was designed specifically around its differential driver outputs and TTL-compatible pullup architecture. Choose SN75115N when it is the exact qualified part for the board and its manufacturer documentation confirms the required electrical characteristics. The available cross-reference data supports package and terminal compatibility, but it does not replace a full review of timing, load current, and temperature specifications.
Is SN75114D suitable for industrial communications equipment?
SN75114D can be used in communications equipment when the enclosure stays within its 0 °C to +70 °C commercial temperature range and the 4.75 V to 5.25 V supply requirement is acceptable. For environments with wider temperature excursions, choose an appropriately rated line driver and confirm its pinout and output ratings. The SN75114D's 16-pin SOIC package supports compact surface-mount assemblies.
Where can I buy SN75114D online?
Use the Request a Quote form on this page to request current SN75114D availability, commercial terms, and lead time. The device is listed by Texas Instruments and appears in distributor catalogs, but current stock and order status can change. Share the exact suffix SN75114D when requesting a quotation so the 16-pin SOIC commercial-grade configuration is identified correctly.
What is the price of SN75114D?
Request a current quotation for SN75114D through the Request a Quote form on this page. Pricing depends on order quantity, inventory position, and contractual terms, and it should not be inferred from a family-level catalog entry. Confirm that the quotation identifies the exact SN75114D suffix, 16-pin SOIC package, and required delivery quantity.
What is the lead time for SN75114D?
Request the current lead time through the Request a Quote form on this page. Texas Instruments lists SN75114D as an orderable product, but production timing and available inventory can vary by quantity and packaging configuration. Provide the required quantity, date code requirements, and shipment destination when requesting a quotation.
Is SN75114D in stock?
Current SN75114D stock status should be confirmed through the Request a Quote form on this page. The manufacturer product page and distributor listings show the part as available for ordering, but catalog presence does not guarantee a specific quantity at a particular location. State the required quantity and packaging preference to obtain an updated availability response.

بيانات مرجعية هندسية لـ SN75114D — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose SN75114D when the design needs two TTL-compatible differential driver channels, direct access to YS and ZS sink outputs, and corresponding YP and ZP active pullup terminals in a 16-pin SOIC footprint. Its stated 4.75 V to 5.25 V supply range and 0 °C to +70 °C commercial temperature range make it appropriate for legacy TTL-based equipment operating within those limits. SN75114DG4 is the closest same-family alternative when its order-code and temperature details meet the design. Consider SN75115N or SN75115NE4 when their manufacturer documentation confirms the required output behavior and qualification. Because these parts share package and terminal arrangements, pinout compatibility alone does not establish functional equivalence; compare logic levels, timing, output loading, and temperature ratings before replacement.

المقارنة مع البدائل

المعامل هذا المنتج SN75114DG4 SN75115N SN75115NE4
Package 16-pin SOIC 16-pin SOIC - same 16-pin SOIC - same 16-pin SOIC - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Dual differential line driver Dual differential line driver Dual interface device Dual interface device
Terminal Count 16 terminals 16 terminals 16 terminals 16 terminals

أبرز الفروقات

  • Two differential driver channels in one 16-pin SOIC (مقابلSN75114DG4)
  • Documented TTL-compatible output architecture (مقابلSN75115N)
  • Commercial temperature specification (مقابلSN75115NE4)

ملاحظات التصميم

Keep the YS, ZS, YP, and ZP nets physically short and follow the manufacturer application layout. The YS and ZS pins are sink outputs, while YP and ZP are corresponding active pullup terminals; incorrect routing can alter signal polarity or cause contention. Place supply decoupling close to the device and provide a low-impedance ground return so switching current does not share a noisy path with the driven signals.

Treat each driven line as a transmission path and validate it with the intended cable, board trace, receiver, and load capacitance. TTL-compatible levels describe logic compatibility, not unlimited drive distance. Use manufacturer output-current and propagation-delay limits when timing system margins, and apply the recommended termination or pullup arrangement when reflections or duty-cycle distortion appear on longer interconnects.

Do not assume that two driver outputs can be shorted together or that an active pullup terminal may be used as an ordinary passive pullup without checking the output-stage architecture. Likewise, do not substitute a logic receiver for the SN75114D solely because the package count matches. Confirm the exact pin assignment, output polarity, load rating, supply range, and temperature grade in the manufacturer datasheet before modifying a live PCB.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The commercial SN75114D is not presented as an automotive-qualified AEC-Q100 device. Compliance attributes not explicitly identified on the manufacturer product page remain unknown.

تم التحقق من البيانات في: 2026-11-09 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

SN75114D datasheet SN75114D datasheet pdf SN75114D pinout SN75114D specifications SN75114D equivalent SN75114D replacement SN75114D vs SN75115N Texas Instruments SN75114D SN75114D 16 pin SOIC SN75114D TTL line driver SN75114D phase splitter SN75114D price SN75114D stock where to buy SN75114D

المكونات والمصطلحات ذات الصلة

Texas Instruments SN75114D SN75114DG4 SN75115N SN75115NE4 dual differential line driver differential line driver interface IC TTL-compatible output totem-pole output sink output active pullup phase splitter TTL expander 16-pin SOIC SOIC package family surface mount 5 V logic digital signal interface transmission line
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر