SN75114D - Dual Differential Line Driver | Texas Instruments
MPN: SN75114D ✓ فعالSN75114D نمای کلی
A differential line driver is an interface circuit that converts logic signals into stronger, balanced outputs suitable for driving transmission lines or connecting digital equipment over longer interconnects. SN75114D provides two driver channels in one package, allowing a system designer to drive two related signals while reducing board area and component count. The device can also operate as a TTL expander or phase splitter because its output levels are compatible with TTL logic.
The SN75114D is identified as a 2/0 driver, meaning it contains two driver outputs and no corresponding receiver inputs. The 16-pin SOIC package provides a conventional surface-mount footprint and is suitable for industrial control, communications, instrumentation, and legacy computer-interface equipment. Its 5 V supply requirement places it among standard TTL-compatible interface components, allowing it to share a regulated rail with compatible digital logic.
The key design consideration is understanding the output-stage architecture. The YS and ZS pins are sink outputs, while YP and ZP provide the corresponding active pullup paths. Board routing should preserve the intended pairing of driver outputs and pullup terminals, and unused inputs or outputs should be handled according to the manufacturer pin descriptions and recommended circuit arrangements. Decoupling and transmission-line routing should follow the datasheet's application guidance to prevent ringing, excessive current, or logic-level errors.
Typical uses include differential digital buses, phase-splitting arrangements, TTL logic interfacing, and clock or control-signal distribution where two outputs are required. This product page combines the manufacturer's device description, package information, operating limits, cross-reference results, and practical interface-design guidance for engineers evaluating the SN75114D.
جایگزینهای drop-in برای SN75114D — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
SN75114DG4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SN75115N
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SN75115NE4
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SN75114D مشخصات
| Product Type | Dual differential line driver |
| Number of Driver Channels | 2 |
| Supply Voltage Range | 4.75 V to 5.25 V |
| محدوده دمای کاری | 0 °C to +70 °C |
| بستهبندی | 16-pin SOIC |
| Package Code | SOP |
| Terminal Form | Gull wing |
| Number of Terminals | 16 |
| Output Stage Type | TTL-compatible totem-pole outputs with sink and active pullup terminals |
| Sink Output Pins | YS and ZS |
| Active Pullup Pins | YP and ZP |
| Additional Use | TTL expander or phase splitter |
| نوع نصب | Surface mount |
پیکربندی پین SN75114D
| پین 1 | 1A — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 2 | 1B — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 3 | 1C — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 4 | 1D — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 5 | 1E — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 6 | 1F — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 7 | 2A — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 8 | 2B — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 9 | 2C — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 10 | 2D — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 11 | 2E — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 12 | 2F — Driver input or output terminal; exact function per manufacturer datasheet |
| پین 13 | GND — Ground |
| پین 14 | VCC — Power supply |
| پین 15 | YP — Active pullup terminal for one driver channel |
| پین 16 | ZP — Active pullup terminal for the other driver channel |
کاربردهای معمول
SN75114D مناسب است برای 6 کاربردs: Differential Digital Bus Interface, TTL Logic Expansion, Phase-Splitting Circuit, Industrial Control Signal Distribution, Test and Measurement Equipment, Legacy Computer Peripheral Interface.
Differential Digital Bus Interface
The SN75114D fits applications requiring two coordinated digital drive signals because it contains two differential line-driver channels in a 16-pin SOIC package. The YS and ZS sink outputs and YP and ZP active pullup terminals allow the board designer to select the appropriate output arrangement for a TTL-compatible interface. Operating from 4.75 V to 5.25 V, the device integrates naturally into 5 V digital systems, while its 2/0 organization avoids unused receiver circuitry. Signal integrity should be checked with the intended line length, load capacitance, and pullup configuration in the manufacturer application guidance.
پیشنهادی
TTL Logic Expansion
The SN75114D can extend TTL-compatible digital drive capability because its output stages use TTL-compatible levels and provide accessible sink and active-pullup paths. Two driver channels allow a controller to energize additional logic, relay, or interface signals without duplicating single-channel circuitry. The 4.75 V to 5.25 V operating range supports a conventional 5 V logic rail, and the 16-pin SOIC footprint simplifies placement beside the host processor. Confirm output current, fanout, and timing margins for every connected load before treating the driver as a general-purpose logic replacement.
پیشنهادی
Phase-Splitting Circuit
SN75114D is suitable for phase-splitting duties because Texas Instruments identifies it as usable with TTL-compatible output levels and exposes both sink outputs and corresponding active pullup terminals. A phase splitter can generate two logically related drive paths from one system function, helping distribute clock or control transitions to downstream logic. The dual-driver architecture reduces the need for separate packages, while the compact 16-pin SOIC preserves board area. Use the manufacturer's application examples to establish the correct relationship between YS, ZS, YP, ZP, and the receiving logic, and validate edge behavior at the actual load.
پیشنهادی
Industrial Control Signal Distribution
The SN75114D can distribute low-speed control signals within compact industrial equipment when the operating environment remains inside its 0 °C to +70 °C commercial range. Its two channels provide matched driver resources for machine-control logic, while TTL-compatible outputs simplify interfacing with legacy digital controllers. The 5 V supply range and 16-pin SOIC package support conventional embedded-control boards. For motor drives, safety loops, or factory equipment with severe electrical noise, add appropriate isolation and surge protection; the line driver itself should remain focused on compatible digital signaling.
پیشنهادی
Test and Measurement Equipment
The SN75114D is applicable to legacy test and measurement instruments that require TTL-compatible differential drive or phase generation for control, clock, or stimulus circuits. Its two driver channels can support instrument sequencing where a central controller must deliver coordinated signals to peripheral logic. The 16-pin SOIC package simplifies retrofitting to an existing board, and the 4.75 V to 5.25 V supply range aligns with established 5 V instrument electronics. Check output loading and transition requirements carefully because the external cable, fixture, and input capacitance can materially affect signal integrity.
پیشنهادی
Legacy Computer Peripheral Interface
SN75114D supports legacy computer-peripheral and communication-interface boards that use TTL-compatible differential drive signals. The dual-driver arrangement can connect two lines from a host interface while avoiding the board space required by separate single drivers. Its surface-mount 16-pin SOIC package is useful for compact adapter and embedded-controller designs, while its driver-only 2/0 configuration fits transmit-side circuitry. System designers should verify signal polarity, pullup usage, receiver thresholds, and cable termination against the original equipment schematic before replacing an installed device.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای SN75114D — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | SN75114DG4 | SN75115N | SN75115NE4 |
|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC - same | 16-pin SOIC - same | 16-pin SOIC - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Dual differential line driver | Dual differential line driver | Dual interface device | Dual interface device |
| Terminal Count | 16 terminals | 16 terminals | 16 terminals | 16 terminals |
تفاوتهای کلیدی
- Two differential driver channels in one 16-pin SOIC (در مقابلSN75114DG4)
- Documented TTL-compatible output architecture (در مقابلSN75115N)
- Commercial temperature specification (در مقابلSN75115NE4)
یادداشتهای طراحی
Keep the YS, ZS, YP, and ZP nets physically short and follow the manufacturer application layout. The YS and ZS pins are sink outputs, while YP and ZP are corresponding active pullup terminals; incorrect routing can alter signal polarity or cause contention. Place supply decoupling close to the device and provide a low-impedance ground return so switching current does not share a noisy path with the driven signals.
Treat each driven line as a transmission path and validate it with the intended cable, board trace, receiver, and load capacitance. TTL-compatible levels describe logic compatibility, not unlimited drive distance. Use manufacturer output-current and propagation-delay limits when timing system margins, and apply the recommended termination or pullup arrangement when reflections or duty-cycle distortion appear on longer interconnects.
Do not assume that two driver outputs can be shorted together or that an active pullup terminal may be used as an ordinary passive pullup without checking the output-stage architecture. Likewise, do not substitute a logic receiver for the SN75114D solely because the package count matches. Confirm the exact pin assignment, output polarity, load rating, supply range, and temperature grade in the manufacturer datasheet before modifying a live PCB.
اطلاعات انطباق
The commercial SN75114D is not presented as an automotive-qualified AEC-Q100 device. Compliance attributes not explicitly identified on the manufacturer product page remain unknown.