MaxLinear

SP3232EHEP-L - 3.3V 460kbps RS-232 Transceiver | MaxLinear

MPN: SP3232EHEP-L ✓ نشط
3.3 V Vdss 16-pin TSSOP Package
الحد الأدنى للطلب: 1 |

SP3232EHEP-L نظرة عامة

The MaxLinear SP3232EHEP-L is a 3.3 V RS-232 transceiver with two drivers, two receivers, and a maximum data rate of 460 kbps. The device is associated with a 16-pin TSSOP package and is intended for portable and hand-held equipment requiring a compact, low-power interface between TTL/CMOS logic and RS-232 lines.

An RS-232 transceiver is an interface IC that combines differential line drivers and receivers with the voltage conversion required to communicate with RS-232 equipment. In the broader semiconductor hierarchy, it belongs to interface ICs and serves as the physical communication layer between a low-voltage digital controller and an RS-232 port. The SP3232EH family targets portable and hand-held applications such as notebook and laptop computers.

The principal operating characteristics are a 3.3 V supply, two driver channels, two receiver channels, and throughput up to 460 kbps. These four features make the SP3232EHEP-L appropriate for point-to-point serial links, configuration ports, service interfaces, and embedded equipment that must exchange RS-232 signals without employing a larger multi-channel transceiver.

MaxLinear describes the SP3232EH as a 2-driver/2-receiver RS-232 solution using a high-efficiency charge-pump power supply. According to the manufacturer data sheet, the charge-pump arrangement requires only 0.1 µF capacitors for 3.3 V operation. This architecture supports a compact external component set while maintaining the elevated and inverted voltage levels required by RS-232 driver outputs.

Typical uses include portable data-acquisition equipment, industrial serial adapters, test fixtures, and controller boards with a legacy RS-232 service port. The 460 kbps rate supports substantially faster communication than conventional low-speed serial links while retaining the simple point-to-point interface of RS-232. System designers should still account for cable length, ground reference, transient protection, and protocol timing.

When laying out the circuit, place the charge-pump capacitors and receiver bypass capacitors close to their associated device pins. Keep the RS-232 driver and receiver routes away from sensitive analog or high-speed digital paths, and provide the protection appropriate to the exposed connector environment. Follow the manufacturer data sheet for capacitor selection, pin assignments, and maximum operating conditions.

This page consolidates the manufacturer specifications, package information, sourcing guidance, comparison points, and practical integration considerations for the SP3232EHEP-L. It is intended to help engineers identify a genuine same-footprint alternative, evaluate the 3.3 V and 460 kbps operating envelope, and plan a robust RS-232 interface before releasing the circuit to production.

بدائل مباشرة لـ SP3232EHEP-L — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع SP3232EHEP-L (نفس عامل الشكل والبصمة) — يختلف في Package.

MaxLinear
Package: 16-TSSOP

SP3232EHEP

✅ بديل مباشر
📦 16-pin TSSOP
Base ordering suffix has the same 3.3 V, 2-driver/2-receiver, and 460 kbps ratings; suffix-specific temperature and qualification terms require confirmation.

📋 بديل مرجعي (غير موجود في الكتالوج)

SP3232EHEY-L/TR

✅ بديل مباشر
MaxLinear
📦 16-pin TSSOP
2 drivers · 2 receivers · 2/2 full RS-232 transceiver · 3 V to 5.5 V · 3.3 V · 460 kbps · RS-232 · True EIA/TIA-232-F operation

✓ متوفر في المخزون

$0.2224 / وحدة

عرض ورقة البيانات ←

SP3232EHEP-L المواصفات

Product Type RS-232 transceiver
جهد التغذية 3.3 V
Maximum Data Rate 460 kbps
Driver Channels 2
Receiver Channels 2
Interface Standard RS-232
Charge-Pump Capacitor Requirement 0.1 µF in 3.3 V operation
Power-Supply Architecture High-efficiency charge-pump power supply
العلبة 16-pin TSSOP
نوع التركيب Surface mount

دليل تكوين أطراف SP3232EHEP-L 16-pin tssop

تكوين الأطراف لـ SP3232EHEP-L (حزمة 16-pin tssop). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-pin tssop لـ SP3232EHEP-L

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ SP3232EHEP-L.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

SP3232EHEP-L مناسب لـ 6 التطبيقs: Portable Serial Adapters, Industrial Data-Acquisition Equipment, Test and Measurement Fixtures, Embedded Controller Service Ports, Point-to-Point Communication Links, Battery-Powered Serial Equipment.

📱

Portable Serial Adapters

The SP3232EHEP-L suits portable equipment that needs to expose an RS-232 service or configuration port without allocating space for a larger transceiver. Its two drivers and two receivers support bidirectional point-to-point communication, while the 460 kbps rate is substantially faster than legacy low-speed serial operation. The 3.3 V supply and 0.1 µF charge-pump capacitors identified by the manufacturer help reduce the surrounding component count. When implementing the adapter, connect the logic-side signals to the host controller through the data-sheet pin table and protect the connector-side lines according to the expected cable and ESD environment.

🏭

Industrial Data-Acquisition Equipment

The SP3232EHEP-L can provide the RS-232 link between an acquisition controller and a service terminal or legacy instrument. Two receiver channels allow the controller to monitor more than one incoming RS-232 signal, while two drivers support outbound command or status traffic. Operation at up to 460 kbps permits short, well-controlled transfers without requiring a higher-speed differential interface. The design should include suitable transient protection at the external connector and should verify that the attached cable length, grounding method, and protocol timing remain reliable at the selected baud rate.

🔧

Test and Measurement Fixtures

The SP3232EHEP-L is useful in compact test fixtures where a computer or embedded controller must communicate with older RS-232 test equipment. Its 460 kbps capability supports efficient command transfer, and the two-driver/two-receiver configuration provides the fundamental channels needed for bidirectional control. Because the transceiver is designed for 3.3 V systems, the fixture controller can use a low-voltage logic domain without adding a separate level-shifting stage. Keep fixture wiring short, maintain a common ground between connected equipment, and place any protection network at the exposed connector rather than allowing external transients to reach the transceiver pins directly.

🧩

Embedded Controller Service Ports

The SP3232EHEP-L provides a compact service interface for embedded controllers that retain an RS-232 connector for configuration, diagnostics, or firmware loading. The 16-pin TSSOP package preserves PCB area, and the 3.3 V operating point aligns with many controller, sensor, and communication subsystems. Its two drivers and two receivers allow command output and response input over the same physical interface. During schematic capture, distinguish the TTL/CMOS-side pins from the RS-232-side pins according to the manufacturer pin-description table, and follow the recommended charge-pump capacitor connections to maintain reliable signal generation.

🌐

Point-to-Point Communication Links

The SP3232EHEP-L supports compact point-to-point links where two systems exchange RS-232 commands and responses. A maximum rate of 460 kbps provides adequate throughput for configuration traffic, short data packets, and status polling, while the integrated charge pump simplifies the external voltage-generation network. The device is particularly useful where only one RS-232 port is required and a multi-channel transceiver would add unused pins. Validate the link with realistic startup behavior, cable capacitance, and connector geometry because the maximum signaling rate does not remove the physical limitations of long or poorly terminated RS-232 cables.

⚡

Battery-Powered Serial Equipment

The SP3232EHEP-L is suitable for battery-powered instruments and field equipment that need an RS-232 connection at a 3.3 V supply level. The low-voltage charge-pump implementation described by the manufacturer uses 0.1 µF capacitors in 3.3 V operation, supporting a compact and energy-conscious interface arrangement. The device's two transmitter and two receiver channels can serve both control commands and returned status without adding another serial transceiver. For a portable design, confirm the exact quiescent and loaded supply-current limits from the manufacturer data sheet, then include an appropriate connector-state strategy so unused RS-232 lines do not increase system energy use unnecessarily.

ملخص المنتجات الموصى بها

SP3232EHEP Same-family RS-232 transceiver candidate يُستخدم في: Portable Serial Adapters, Industrial Data-Acquisition Equipment, Test and Measurement Fixtures, Embedded Controller Service Ports, Point-to-Point Communication Links, Battery-Powered Serial Equipment SP3232EHEY-L MaxLinear يُستخدم في: Portable Serial Adapters, Industrial Data-Acquisition Equipment, Test and Measurement Fixtures, Embedded Controller Service Ports, Point-to-Point Communication Links, Battery-Powered Serial Equipment
What is the SP3232EHEP-L?
The SP3232EHEP-L is a 3.3 V, 2-driver/2-receiver RS-232 transceiver capable of operating at data rates up to 460 kbps. According to the MaxLinear SP3232EH data sheet, it is intended for portable and hand-held equipment such as notebook and laptop computers. It combines RS-232 line-interface drivers, receivers, and a charge-pump supply in a 16-pin TSSOP package.
What is the operating voltage of SP3232EHEP-L?
The SP3232EHEP-L operates from a 3.3 V supply. The manufacturer data sheet specifically describes 3.3 V charge-pump operation with only 0.1 µF charge-pump capacitors. This low-voltage operation supports portable equipment designs in which reducing supply current and circuit size are important considerations.
What is the maximum data rate of SP3232EHEP-L?
The SP3232EHEP-L supports RS-232 communication at up to 460 kbps. According to the MaxLinear SP3232EH data sheet, this rate meets the requirements of high-speed RS-232 applications while retaining the protocol and connector characteristics associated with a point-to-point serial interface.
Where can I download the SP3232EHEP-L datasheet?
The official MaxLinear SP3232EH data sheet is available at https://www.maxlinear.com/ds/sp3232eh.pdf. It covers the SP3232EH family's electrical characteristics, charge-pump implementation, RS-232 interface behavior, and application information. Use the pin-description table and recommended application circuit when assigning tracks or selecting external capacitors.
Where can I find the SP3232EHEP-L pinout?
The SP3232EHEP-L pinout should be taken from the pin-description table in the MaxLinear SP3232EH data sheet at https://www.maxlinear.com/ds/sp3232eh.pdf. The component uses a 16-pin TSSOP package. Verify driver, receiver, supply, ground, and charge-pump capacitor connections against the exact device suffix before finalizing PCB artwork.
Is the SP3232EHEP-L suitable for a 460 kbps RS-232 link?
Yes, the SP3232EHEP-L is rated for data rates up to 460 kbps. According to the manufacturer data sheet, the device is intended for high-speed RS-232 applications. Actual link reliability also depends on cable length, connector wiring, ground continuity, signal protection, and the timing margins of the connected protocol implementation.
What is the best drop-in replacement for SP3232EHEP-L?
The SP3232EHEP is the closest identified same-brand alternative because it belongs to the SP3232EH family and retains the same interface architecture, 3.3 V operation, two drivers, two receivers, and 460 kbps data rate. Verify the exact package, temperature rating, pin assignments, and ordering suffix before treating it as a drop-in replacement on an existing board.
Can SP3232EHEY-L replace SP3232EHEP-L?
The SP3232EHEY-L is a 16-TSSOP member of the same SP3232EH interface family and is the closest identified same-package candidate. Its suitability as a direct replacement depends on matching the SP3232EHEP-L temperature grade, enable or shutdown behavior, package dimensions, and every pin assignment. Use the manufacturer ordering guide before approving the substitution.
SP3232EHEP-L vs SP3232EHEP — which one should I choose?
Choose the SP3232EHEP when the base ordering code meets the exact electrical, environmental, and packaging requirements of the design. Both parts belong to the SP3232EH family and support the 2-driver/2-receiver, 3.3 V, 460 kbps interface described by the manufacturer. The difference is most likely in the ordering suffix, so the manufacturer part-number guide must be checked before substitution.
SP3232EHEP-L vs MAX3221IPWR — which RS-232 transceiver fits?
The SP3232EHEP-L is the better match when the design specifically requires the MaxLinear SP3232EH family and its 2-driver/2-receiver, 3.3 V, 460 kbps feature set. The MAX3221IPWR is a different RS-232 transceiver family in a different package, so it should not be treated as a footprint-compatible drop-in replacement without a full pin and electrical review.
When should I choose SP3232EHEP-L over another RS-232 transceiver?
Choose the SP3232EHEP-L when a compact 16-pin TSSOP RS-232 interface, 3.3 V operation, two drivers, two receivers, and throughput up to 460 kbps match the system requirements. It is particularly suitable for portable equipment and compact controller boards. A different transceiver is preferable only when its package, supply, channel count, data rate, protection, or lifecycle requirements are a better fit.
What is the best MaxLinear equivalent for SP3232EHEP-L?
The SP3232EHEP is the closest identified MaxLinear equivalent within the SP3232EH product family. It preserves the 2-driver/2-receiver architecture, 3.3 V operating mode, and 460 kbps capability, while retaining the TSSOP form used for the target interface. Check the exact pin table, temperature range, and suffix-specific qualification before production use.
Where can I buy SP3232EHEP-L and check its lead time?
Use the Request a Quote form on this XAIPART page to request SP3232EHEP-L availability, current commercial terms, and lead time for your required quantity. The form is the appropriate route for a quote-based sourcing request and allows the manufacturer, package, and quantity requirements to be communicated without relying on an unconfirmed stock indication.
What is the price of SP3232EHEP-L?
Current commercial pricing for the SP3232EHEP-L is generated through the Request a Quote form on this page. Submit the required quantity, package variant, and delivery location so the offer can reflect the current supply position. This avoids presenting a stale catalog figure as if it were a live quotation.
Is SP3232EHEP-L currently in stock?
Current stock should be confirmed through the Request a Quote form on this XAIPART page. Availability can vary with manufacturer inventory, allocation, package form, order quantity, and delivery schedule. Providing your quantity and target date in the request produces a sourcing response tied to the specific SP3232EHEP-L order code.

بيانات مرجعية هندسية لـ SP3232EHEP-L — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the SP3232EHEP-L for compact 3.3 V equipment that needs a 2-driver/2-receiver RS-232 interface operating at up to 460 kbps. Its 16-pin TSSOP package and 0.1 µF charge-pump capacitors suit portable controllers, service ports, industrial fixtures, and point-to-point adapters where board area matters. The SP3232EHEP is the closest same-family candidate when its ordering suffix matches the required environmental and qualification criteria. Consider the SP3232EHEY-L only after confirming every pin, temperature grade, and ordering condition because its suffix differs. MAX3221IPWR may serve the same broad RS-232 function, but its different package makes it unsuitable as a direct footprint replacement. For any substitute, verify supply voltage, channel count, logic levels, data rate, charge-pump capacitance, and connector-side protection before releasing the PCB.

المقارنة مع البدائل

المعامل هذا المنتج SP3232EHEP SP3232EHEY-L
Brand MaxLinear MaxLinear MaxLinear
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver
Driver Channels 2 2 2
Receiver Channels 2 2 2
Target Application Portable and hand-held RS-232 equipment Portable and hand-held RS-232 equipment RS-232 interface equipment

أبرز الفروقات

  • Provides two-driver and two-receiver integration in a 16-pin TSSOP (مقابلSP3232EHEY-L)
  • Uses a low-voltage charge-pump implementation for portable systems (مقابلSP3232EHEP)
  • Supports higher RS-232 throughput than conventional low-speed serial links (مقابلMAX3221IPWR)

ملاحظات التصميم

Place the 0.1 µF charge-pump capacitors directly beside the pins and circuit identified in the MaxLinear data sheet. Keep these high-current switching loops compact and route them away from receiver inputs and sensitive analog sections. In addition to schematic equivalence, verify capacitor voltage rating, dielectric tolerance, and effective DC-bias derating because compact ceramic capacitors can lose substantial capacitance at the working voltage.

Separate the logic-side and RS-232-side nets clearly in the layout. Keep the exposed connector and protection network away from the transceiver and host controller, and provide a low-impedance return path for cable currents. The RS-232 drivers produce a large voltage swing relative to the 3.3 V logic domain, so generous spacing and minimized connector-side copper help limit capacitive coupling into adjacent circuits.

Do not assume that the 460 kbps signaling rate guarantees reliable communication over an arbitrary cable length. RS-232 is point-to-point, and baud rate, cable capacitance, grounding, connector geometry, and the data protocol must be considered together. Use the manufacturer data sheet for signal timing and logic levels, and validate startup, shutdown, and repeated communication over the intended cable and connector configuration.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The device is a general-purpose RS-232 interface IC for portable and hand-held equipment, so AEC-Q100 qualification is not indicated. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the applicable manufacturer documentation.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

SP3232EHEP-L datasheet SP3232EHEP-L datasheet pdf SP3232EHEP-L pinout SP3232EHEP-L specifications MaxLinear SP3232EHEP-L SP3232EHEP-L 460kbps SP3232EHEP-L 3.3V RS-232 SP3232EHEP-L 16-TSSOP SP3232EHEP-L equivalent SP3232EHEP-L replacement SP3232EHEP-L price SP3232EHEP-L stock

المكونات والمصطلحات ذات الصلة

MaxLinear SP3232EHEP-L SP3232EHEP SP3232EHEY-L RS-232 RS-232 transceiver interface IC semiconductor 3.3 V logic 460 kbps 2-driver/2-receiver charge-pump power supply 0.1 µF capacitor 16-pin TSSOP TSSOP package family surface-mount technology SMD package portable equipment hand-held equipment notebook computer laptop computer RS-232 driver RS-232 receiver industrial control serial interface
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر