STMicroelectronics

STM32F334R6T6 - 72MHz Cortex-M4 32KB MCU | STMicroelectronics

MPN: STM32F334R6T6 ✓ نشط
3.3 V Vdss 64-pin LQFP, 10 x 10 mm Package 72 MHz Speed 32 KB Memory
الحد الأدنى للطلب: 1 |

STM32F334R6T6 نظرة عامة

The STMicroelectronics STM32F334R6T6 is a 32-bit ARM Cortex-M4 microcontroller rated up to 72 MHz, with 32 KB of embedded Flash memory and 16 KB of SRAM in a 64-pin LQFP package measuring 10 x 10 mm. It combines a high-performance Cortex-M4 processor with floating-point capability and a high-resolution timer, making it suitable for precision motor-control, signal-processing and embedded-control systems. The device is based on a 3.3 V supply and is offered in tray packaging.

A microcontroller is a programmable semiconductor that integrates a processor core, memory and peripheral interfaces into one device. The STM32F3 family belongs to the ARM Cortex-M microcontroller hierarchy, combining low-power embedded processing with timers, communication interfaces and analog functions. The STM32F334R6T6 is particularly suited to applications where real-time control, compact implementation and a relatively high timer update rate are important.

The most prominent device characteristics are its 72 MHz maximum operating frequency, 32 KB Flash program memory and 16 KB SRAM. Its 64-LQFP package provides access to a substantial set of general-purpose and peripheral pins while retaining a compact 10 x 10 mm body. The high-resolution timer supports applications requiring precise timing, while the Cortex-M4 architecture provides efficient fixed-point and single-precision floating-point processing for control algorithms and digital signal processing.

The STM32F334R6T6 is positioned as a mixed-signal MCU within the STM32F3 family. It combines the processor and embedded memories with timers, serial interfaces and analog peripherals on one package. Firmware determines the operating behavior, peripheral allocation and real-time control performance. Designers should allocate the available Flash and SRAM for the application, interrupt handlers, bootloader and any safety margin rather than treating the nominal memory capacity as entirely available to application code.

Typical uses include digital motor controllers, precision timers, industrial automation modules, sensor acquisition systems, communication equipment and compact embedded-control boards. The 72 MHz processing rate supports responsive control loops, while the high-resolution timer is useful when an application must measure narrow timing intervals or generate precise timing relationships.

The principal design consideration is pin and power planning. Because the MCU exposes 64 pins in a relatively small LQFP footprint, a multilayer board is generally preferable for dependable routing of power, ground, communication signals and timer outputs. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be configured to avoid floating states. Firmware and peripheral configuration must also be reviewed before assuming that a different STM32F3 device is a functionally equivalent replacement.

This product overview consolidates the confirmed processor, memory, package and supply information into an engineering-oriented format. It also provides drop-in candidate analysis, application guidance, comparison parameters and design notes intended to accelerate component selection without treating pin compatibility as proof of identical firmware behavior.

بدائل مباشرة لـ STM32F334R6T6 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع STM32F334R6T6 (نفس عامل الشكل والبصمة) — يختلف في Flash Memory, Package, SRAM.

STMicroelectronics
Flash Memory: 64 KB
Package: LQFP64 (10x10 mm)
SRAM: 12 KB
قارن مع STM32F334R6T6 →

STM32F334R6T5

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 64-pin LQFP (10 x 10 mm)
Same STM32F334R6 base configuration, 72 MHz core, 32 KB Flash and 16 KB SRAM; final ordering suffix differs by 0% in confirmed core and memory ratings, with grade or temperature coding requiring verification

📋 بديل مرجعي (غير موجود في الكتالوج)

STM32F302R6T6

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 64-pin LQFP (10 x 10 mm)
Same 72 MHz Cortex-M4 class and 64-pin LQFP footprint; confirmed core frequency differs by 0%, but timer and peripheral feature differences require validation

📋 بديل مرجعي (غير موجود في الكتالوج)

STM32F303R6T6

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 64-pin LQFP (10 x 10 mm)
Same STM32F3 72 MHz Cortex-M4 positioning and 64-pin LQFP footprint; mixed-signal peripheral allocation differs, while the confirmed processor-frequency difference is 0%

📋 بديل مرجعي (غير موجود في الكتالوج)

STM32F334R8T6

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
STMicroelectronics
📦 64-pin LQFP (10 x 10 mm)
ARM Cortex-M4 with FPU · 72 MHz · 64 KB · 12 KB · LQFP64 (10x10 mm) · 2.0V to 3.6V · -40°C to +85°C · 51

تواصل لمعرفة السعر

عرض ورقة البيانات ←

STM32F334R4T6

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 64-pin LQFP (10 x 10 mm)
Same 72 MHz Cortex-M4 core and 64-pin LQFP footprint, but Flash decreases from 32 KB to 16 KB by 50%, requiring firmware capacity checks

📋 بديل مرجعي (غير موجود في الكتالوج)

STM32F334R6T6 الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ARM Cortex-M4 microcontroller
Maximum CPU Frequency 72 MHz
CPU Architecture ARM Cortex-M4
Instruction Set Width 32 bit
Flash Memory 32 KB
SRAM 16 KB
جهد التغذية التشغيلي 3.3 V
العلبة 64-pin LQFP, 10 x 10 mm
عدد الأطراف 64 pins
نوع التركيب Surface mount
Timer Feature High-resolution timer
Floating-Point Support Single-precision floating point
Core Architecture High-performance 32-bit RISC
Packaging Type Tray

دليل تكوين أطراف STM32F334R6T6 64-pin lqfp, 10 x 10 mm

تكوين الأطراف لـ STM32F334R6T6 (حزمة 64-pin lqfp, 10 x 10 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 64-pin lqfp, 10 x 10 mm لـ STM32F334R6T6

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ STM32F334R6T6.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

STM32F334R6T6 مناسب لـ 6 التطبيقs: Precision DC Motor Control, Industrial Sensor Acquisition, Digital Power Converter Control, Communication Equipment Controller, Precision Timing Module, Embedded Control and HMI Module.

⚡

Precision DC Motor Control

The STM32F334R6T6 fits compact DC motor controllers that need deterministic timing without a large external processor. Its 72 MHz ARM Cortex-M4 core can execute proportional-integral-derivative control loops, current sampling logic and protection handling, while the high-resolution timer supports precise PWM updates and time measurements. In a typical 3.3 V control architecture, the MCU evaluates current and position feedback, updates the power-stage command and manages faults. The 64-pin LQFP also provides enough external connections for encoder inputs, Hall sensors, PWM outputs and communications. Designers should reserve timer resources for the control loop and verify the family datasheet for the exact channel assignments and complementary-output options used by the selected motor driver.

🏭

Industrial Sensor Acquisition

The STM32F334R6T6 is appropriate for industrial measurement modules that combine sensor conditioning with local computation. The 72 MHz Cortex-M4 processor can filter, calibrate and transmit measurements from analog or digital sensors, while its 16 KB SRAM supports buffering and real-time acquisition tasks. The 64-pin LQFP package exposes multiple I/O options for sensor interfaces, status indicators and field-bus links. A practical implementation uses the MCU for timestamped sampling, filtering and diagnostics rather than attempting to perform all signal conditioning inside the MCU. Because the product listing confirms the 3.3 V supply but not every analog or communication peripheral, engineers should verify the required ADC channels, comparator resources and serial interfaces against the official family datasheet before finalizing the schematic.

🔋

Digital Power Converter Control

The STM32F334R6T6 can serve as the digital controller for a compact switching power converter or digitally controlled supply. Its 72 MHz Cortex-M4 core is suitable for sampled control loops, while the high-resolution timer can improve PWM resolution and timing consistency for power conversion. In a typical design, the MCU drives a gate-circuit interface, samples feedback, updates duty cycle and manages startup or fault states. The 3.3 V control domain keeps the processor separate from higher-power switching stages, while the 64-pin package provides connections for sensing and protection signals. Final compensation design must use actual switch and diode characteristics, and the electrical requirements of the family datasheet must be checked for high-side sensing, bootstrap circuitry and fault-response timing.

🌐

Communication Equipment Controller

The STM32F334R6T6 can manage protocol handling and system control in compact communications equipment. Its 72 MHz Cortex-M4 core supports multitasking, framing, buffering and real-time response, while 32 KB of Flash accommodates a protocol stack, configuration data and application firmware. The 64-pin LQFP provides more I/O than a minimal controller and can support serial links, indicators and configuration controls. A typical implementation assigns dedicated timer and serial resources to frame timing, uses interrupts for data reception and keeps protocol latency within the application's packet deadlines. The exact UART, USB, CAN or other interface availability must be confirmed in the family documentation, since the product summaries identify the MCU family and high-resolution timer but do not enumerate every peripheral variant.

🖥️

Precision Timing Module

The STM32F334R6T6 is well suited to timing-sensitive modules that measure intervals, generate synchronized events or coordinate multiple outputs. Its high-resolution timer is the central feature, while the 72 MHz Cortex-M4 core handles event filtering, calibration and reporting. In a pulse-measurement design, timer capture channels timestamp input edges and the processor converts the elapsed counts into engineering units. In a synchronized-output design, multiple timer channels establish the relative timing of control or test signals. The 64-pin LQFP allows timing inputs, trigger lines and status signals to be routed without an external complex-programmable logic device. Clock accuracy, timer prescaler resolution and input filtering determine absolute timing performance, so the final design should calculate those values from the selected oscillator configuration.

📱

Embedded Control and HMI Module

The STM32F334R6T6 can serve as the control processor for compact embedded-control modules that include local status indication, user inputs and communications. Its Cortex-M4 architecture provides enough performance for menu logic, parameter handling, data logging and real-time background tasks, while the 64-pin package offers a broad mix of general-purpose I/O. A typical design connects buttons, indicators, a local display interface and a network or serial link, with the MCU maintaining the operating state and executing control sequences. The 32 KB Flash requirement should be checked against bootloader size and firmware growth, while the 16 KB SRAM must accommodate stack, buffers and the active operating system. Pin multiplexing should be reviewed early because display, communication and control functions can compete for the same timer, serial and GPIO resources.

What are the key specifications of STM32F334R6T6 that engineers should know?
The STM32F334R6T6 is a 32-bit ARM Cortex-M4 microcontroller operating up to 72 MHz, with 32 KB of Flash, 16 KB of SRAM and a 64-pin LQFP package. According to the STMicroelectronics STM32F334R6 product page, the device belongs to the STM32F334x4/6/8 family and includes a high-performance Cortex-M4 core with floating-point capability. Distributed product information also identifies a high-resolution timer, making the part relevant to precision timing and motor-control designs.
Where can I download the STM32F334R6T6 datasheet PDF?
The official STM32F334R6T6 documentation starts at the STMicroelectronics STM32F334R6 product page, which links to the family datasheet and supporting technical documents. Use the manufacturer's product page at https://www.st.com/en/microcontrollers-microprocessors/stm32f334r6.html for the current PDF and revision-controlled documentation. Third-party datasheet indexes can help locate a mirror, but STMicroelectronics remains the authoritative source for pin assignments, electrical limits and peripheral behavior.
Where can I find the STM32F334R6T6 pinout?
The STM32F334R6T6 pinout is published in the pin-definition section of the STM32F334x4/6/8 family datasheet, accessible through the official STM32F334R6 product page. Use the 64-pin LQFP drawing and pin-description tables for the 10 x 10 mm package. Assign PCB nets directly from those tables, including power, ground, reset, boot and unused-pin requirements, rather than inferring connections from the board footprint alone.
Is the STM32F334R6T6 suitable for motor-control applications?
The STM32F334R6T6 is suitable for compact real-time motor-control designs that benefit from a 72 MHz Cortex-M4 core and a high-resolution timer. The timer can provide precise event timing and periodic control updates, while the processor can execute control calculations and interface logic. Suitability still depends on the selected motor, sensing method, power stage and required control bandwidth; those parameters are not established by the MCU name alone.
What is the difference between STM32F334R6T6 and STM32F302R6T6?
The STM32F334R6T6 and STM32F302R6T6 are both Cortex-M4-class STMicroelectronics devices associated with a 64-pin LQFP configuration, but they are not necessarily identical in peripheral mix or control features. The STM32F334R6T6 is specifically identified as a high-resolution-timer part. Before treating the STM32F302R6T6 as a replacement, compare the family datasheets for peripheral mapping, timer channels, pin functions, clock tree, memory organization and firmware migration requirements.
When should I choose STM32F334R6T6 instead of a smaller 32-pin STM32 MCU?
Choose the STM32F334R6T6 when the design needs more external connectivity than a 32-pin MCU provides or requires access to specific STM32F334-family peripheral functions. Its 64-pin LQFP package exposes more I/O than a 32-pin device and includes a high-resolution timer, while the 72 MHz Cortex-M4 core provides ample control-processing performance. A smaller package may be preferable when the board needs fewer I/O, a smaller footprint or lower overall system complexity.
What can replace the STM32F334R6T6?
The closest candidates are same-family STMicroelectronics STM32F3 devices that use the 64-pin LQFP footprint, but a replacement is not confirmed solely by matching the package. The STM32F334R6T6 combines a 72 MHz Cortex-M4 core, 32 KB Flash, 16 KB SRAM and a high-resolution timer, so the candidate must preserve the required pins, memory, clock configuration and timer resources. Firmware, electrical-limit and peripheral-mapping checks remain mandatory after any substitution.
Is the STM32F334R6T6 the same as the STM32F334R6T5?
The STM32F334R6T6 and STM32F334R6T5 share the same STM32F334R6 device base and 64-pin LQFP architecture, but the final ordering code may encode a different qualification or temperature condition. According to STMicroelectronics ordering information, the exact suffix must be decoded before procurement or substitution. Confirm the temperature range, packing configuration and product-grade requirements for the assembled application rather than treating the two suffixes as automatically interchangeable.
What is the best GigaDevice equivalent for STM32F334R6T6?
No verified GigaDevice drop-in equivalent for the STM32F334R6T6 is established by the available cross-reference information. A GigaDevice device with a 64-pin package and Cortex-M4 processor would still need verification for exact pin functions, 32 KB Flash, 16 KB SRAM, high-resolution timer resources, clock behavior and firmware compatibility. Because no manufacturer cross-reference confirms all of these requirements, treating a candidate as a true drop-in replacement would be premature.
Where can I buy STM32F334R6T6 online?
Use the Request a Quote form on this page to request STM32F334R6T6 availability, order quantity and delivery terms. The exact part is listed by major authorized distribution channels and the manufacturer, but inventory and commercial terms can change. Include the required tray quantity, date-code preference and target delivery location in the request so the quote reflects the complete STM32F334R6T6 ordering code rather than a related STM32F3 device.
What is the price of STM32F334R6T6?
The current commercial price for STM32F334R6T6 is displayed through the Request a Quote form on this page. Pricing can vary with quantity, inventory, date code, delivery terms and regional currency, so a stale fixed figure is not suitable for budgeting. Submit the required tray quantity and shipping destination with the request for an exact quotation tied to the specified MPN and order conditions.
What is the lead time for STM32F334R6T6?
The current lead time for STM32F334R6T6 should be confirmed through the Request a Quote form on this page. Lead time depends on factory inventory, demand, date-code availability, requested quantity and logistics terms. For production planning, request a scheduled delivery quotation and identify any acceptable date-code window. Do not rely on generic marketplace stock messages because they do not guarantee allocation for a production order.
Is STM32F334R6T6 in stock?
STM32F334R6T6 availability changes with channel inventory and replenishment activity. Use the Request a Quote form on this page to request current stock confirmation, quantity allocation and an estimated delivery date. The exact ordering information matters because the T6 suffix includes the manufacturer's commercial packing and grade coding. Confirm the required quantity and acceptable date-code policy with the quotation.
How much power does the STM32F334R6T6 require?
The STM32F334R6T6 operates from a 3.3 V supply, but total power depends on CPU utilization, peripheral activity, I/O loading and ambient conditions. The available product information confirms the 3.3 V operating supply and 72 MHz maximum frequency but does not publish a complete active-current specification in the cited listing. Use the family datasheet electrical characteristics for current consumption and design the power rail for the worst applicable operating mode rather than relying on nominal processing frequency alone.
Does the STM32F334R6T6 support floating-point calculations?
The STM32F334R6T6 uses an ARM Cortex-M4 core with single-precision floating-point capability. According to the STMicroelectronics STM32F334R6 family description, the processor combines a 32-bit RISC architecture, operation up to 72 MHz and embedded floating-point functions. This supports real-time control filters, signal transforms and sensor calculations without requiring a separate coprocessor, although code size and interrupt timing should still be evaluated in the final firmware build.

بيانات مرجعية هندسية لـ STM32F334R6T6 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the STM32F334R6T6 when the design specifically benefits from its 72 MHz Cortex-M4 core, 16 KB SRAM, 32 KB Flash and high-resolution timer in a 64-pin LQFP package. It is a strong fit for compact real-time motor control, precision timing and mixed-signal embedded systems that need more I/O than a 32-pin MCU. Consider the STM32F334R6T5 when its ordering suffix maps to the required qualification condition, because its confirmed core and memory ratings match the target. Use the STM32F334R8T6 when firmware needs 64 KB rather than 32 KB of Flash, and consider the STM32F334R4T6 only when the application fits within 16 KB. Evaluate the STM32F302R6T6 or STM32F303R6T6 only after checking the exact peripheral map, timer allocation, analog resources and firmware implications. Package equality alone is not sufficient to approve any substitution.

المقارنة مع البدائل

المعامل هذا المنتج STM32F334R6T5 STM32F302R6T6 STM32F303R6T6 STM32F334R8T6 STM32F334R4T6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-pin LQFP (10 x 10 mm) 64-pin LQFP (10 x 10 mm) 64-pin LQFP (10 x 10 mm) 64-pin LQFP (10 x 10 mm) 64-pin LQFP (10 x 10 mm) 64-pin LQFP (10 x 10 mm)
CPU Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Maximum Frequency 72 MHz 72 MHz 72 MHz 72 MHz 72 MHz 72 MHz
Operating Supply 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Timer Position High-resolution timer High-resolution timer STM32F3 general-purpose timers; exact feature mapping required Mixed-signal timer resources; exact mapping required High-resolution timer High-resolution timer
Floating-Point Support Single-precision floating point Single-precision floating point Single-precision floating point Single-precision floating point Single-precision floating point Single-precision floating point

أبرز الفروقات

  • Purpose-specific high-resolution timer positioning (مقابلSTM32F302R6T6)
  • Closest same-base ordering option (مقابلSTM32F334R6T5)
  • More Flash headroom in the R8 variant (مقابلSTM32F334R8T6)
  • Balanced memory configuration for control firmware (مقابلSTM32F334R4T6)

ملاحظات التصميم

Reserve the 64-pin LQFP land pattern exactly as defined by the manufacturer package drawing, including exposed or thermal-related requirements where applicable. Place every supply decoupling capacitor immediately between the corresponding power and ground pins, and provide a low-impedance ground plane beneath the device. For a 10 x 10 mm LQFP, fanout, via placement and assembly clearances require particular care; use a multilayer PCB when the design needs clean return paths for high-speed or switching signals.

Estimated power consumption cannot be fixed from CPU frequency alone. Use the family datasheet current measurements at the selected clock, operating voltage and peripheral state, then calculate worst-case supply demand as I_active plus I_IO plus margin for startup and temperature. For example, at a 3.3 V rail, every additional 10 mA of average current corresponds to 33 mW of rail load; convert that current into regulator capacity requirements and thermal rise for the complete 3.3 V system.

Do not treat a matching 64-pin LQFP footprint as proof of a drop-in replacement. Compare the pin table, alternate-function mapping, timer channels, ADC inputs, clock pins, debugging interface and absolute maximum ratings between the original and candidate device. The STM32F334R6T6 is distinguished by its high-resolution timer, so designs that depend on that peripheral require an explicit resource-level review before approving a substitute.

Assign oscillator, debug and high-speed communication nets before committing the PCB layer stack, because these signals often require short paths and continuous return references. Keep crystal or clock traces away from switching-node and high-current power paths, and avoid routing sensitive timer-capture signals parallel to fast digital edges. If the MCU controls a switching converter, separate the power stage from the sensing path and place protection components close to their associated pins.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The confirmed product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals status. Verify these requirements through the current manufacturer product documentation and purchasing records.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

STM32F334R6T6 STM32F334R6T6 datasheet STM32F334R6T6 pinout STM32F334R6T6 datasheet pdf STM32F334R6T6 equivalent STM32F334R6T6 replacement STM32F334R6T6 footprint STM32F334R6T6 price STM32F334R6T6 stock STMicroelectronics STM32F334R6T6 STM32F334R6T6 application circuit STM32F334R6T6 vs STM32F302R6T6

المكونات والمصطلحات ذات الصلة

STMicroelectronics STM32F334R6T6 STM32F334R6 STM32F334R6T5 STM32F302R6T6 STM32F303R6T6 STM32F334R8T6 STM32F334R4T6 ARM Cortex-M4 32-bit RISC processor STM32F3 family microcontroller embedded microcontroller semiconductor 32 KB Flash memory 16 KB SRAM 72 MHz clock single-precision floating point high-resolution timer 64-pin LQFP 10 x 10 mm package surface-mount package 3.3 V power supply motor control precision timing
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر