STM32F730R8T6 - 32-bit ARM Cortex-M7 MCU 64-pin LQFP | STMicroelectronics
MPN: STM32F730R8T6 ✓ نشطSTM32F730R8T6 نظرة عامة
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F730R8T6 belongs to the STM32F7 family, which is positioned as a high-performance MCU line within the broader STM32 ecosystem. The Cortex-M7 core is a high-performance 32-bit processor that supports DSP instructions and a floating-point unit (FPU), making it suitable for digital signal processing and control applications.
Key features of the STM32F730R8T6 include a 216 MHz Cortex-M7 core with double-precision FPU, 64 KB Flash, 256 KB SRAM, and a comprehensive set of peripherals. It supports a wide range of communication interfaces including USART, SPI, I2C, USB OTG HS/FS, CAN, and SDMMC. The device also includes advanced analog peripherals such as 12-bit ADCs and DACs, as well as timers, PWM channels, and a cryptographic acceleration unit. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C.
The STM32F730R8T6 is built on STMicroelectronics' advanced 90nm process technology, offering a balance of performance and power efficiency. The Cortex-M7 core with FPU and DSP instructions enables efficient execution of complex algorithms, while the ART Accelerator™ ensures zero-wait-state execution from Flash memory. The device also features a memory protection unit (MPU), a direct memory access (DMA) controller, and a flexible clock tree with multiple PLLs.
Typical applications include industrial control, motor drives, IoT gateways, audio processing, and consumer electronics. The rich connectivity and high processing power make it suitable for applications requiring real-time control and communication. For example, in industrial automation, the STM32F730R8T6 can handle complex control loops and communicate over multiple protocols simultaneously.
When designing with this device, ensure proper decoupling of the power supply pins and a stable clock source. The internal RC oscillator can be used for basic operation, but an external crystal is recommended for applications requiring precise timing. The device supports various low-power modes, which can be leveraged to optimize energy consumption in battery-powered applications.
بدائل مباشرة لـ STM32F730R8T6 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
STM32F730R8T6
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F730R8T6 الحدود القصوى والخصائص الكهربائية
| Core | ARM Cortex-M7 |
| أقصى تردد للساعة | 216 MHz |
| Flash Memory | 64 KB |
| SRAM | 256 KB |
| العلبة | LQFP-64 |
| Operating Voltage | 1.7 V to 3.6 V |
| درجة حرارة التشغيل | -40°C to +85°C |
| GPIO Pins | 50 |
| ADC | 3x 12-bit, up to 16 channels |
| DAC | 2x 12-bit |
| Timers | 12x 16-bit, 2x 32-bit |
| Communication Interfaces | USART, SPI, I2C, USB OTG HS/FS, CAN, SDMMC |
| DMA | 2x DMA controllers with 16 streams |
| Cryptographic Acceleration | AES, DES, 3DES, SHA-1, SHA-256 |
| حالة RoHS | Compliant |
تكوين أطراف STM32F730R8T6
| دبوس 1 | VBAT — Backup battery supply |
| دبوس 2 | PC13 — GPIO or RTC output |
| دبوس 3 | PC14 — GPIO or OSC32_IN |
| دبوس 4 | PC15 — GPIO or OSC32_OUT |
| دبوس 5 | PF0 — GPIO |
| دبوس 6 | PF1 — GPIO |
| دبوس 7 | NRST — Reset (active low) |
| دبوس 8 | VSSA — Analog ground |
| دبوس 9 | VDDA — Analog power supply |
| دبوس 10 | PA0 — GPIO/ADC |
| دبوس 11 | PA1 — GPIO/ADC |
| دبوس 12 | PA2 — GPIO/USART2_TX |
| دبوس 13 | PA3 — GPIO/USART2_RX |
| دبوس 14 | PA4 — GPIO/SPI1_NSS |
| دبوس 15 | PA5 — GPIO/SPI1_SCK |
| دبوس 16 | PA6 — GPIO/SPI1_MISO |
| دبوس 17 | PA7 — GPIO/SPI1_MOSI |
| دبوس 18 | PA8 — GPIO/USART1_CK |
| دبوس 19 | PA9 — GPIO/USART1_TX |
| دبوس 20 | PA10 — GPIO/USART1_RX |
| دبوس 21 | PA11 — GPIO/USB_DM |
| دبوس 22 | PA12 — GPIO/USB_DP |
| دبوس 23 | PA13 — GPIO/SWDIO |
| دبوس 24 | PA14 — GPIO/SWCLK |
| دبوس 25 | PA15 — GPIO/JTDI |
| دبوس 26 | VDD — Digital power supply |
| دبوس 27 | VSS — Digital ground |
| دبوس 28 | PB0 — GPIO/ADC |
| دبوس 29 | PB1 — GPIO/ADC |
| دبوس 30 | PB2 — GPIO |
| دبوس 31 | PB3 — GPIO/JTDO |
| دبوس 32 | PB4 — GPIO/NJTRST |
| دبوس 33 | PB5 — GPIO/I2C1_SMBA |
| دبوس 34 | PB6 — GPIO/I2C1_SCL |
| دبوس 35 | PB7 — GPIO/I2C1_SDA |
| دبوس 36 | PB8 — GPIO/I2C1_SCL |
| دبوس 37 | PB9 — GPIO/I2C1_SDA |
| دبوس 38 | PB10 — GPIO/I2C2_SCL |
| دبوس 39 | PB11 — GPIO/I2C2_SDA |
| دبوس 40 | VDD — Digital power supply |
| دبوس 41 | VSS — Digital ground |
| دبوس 42 | PB12 — GPIO/SPI2_NSS |
| دبوس 43 | PB13 — GPIO/SPI2_SCK |
| دبوس 44 | PB14 — GPIO/SPI2_MISO |
| دبوس 45 | PB15 — GPIO/SPI2_MOSI |
| دبوس 46 | PC0 — GPIO/ADC |
| دبوس 47 | PC1 — GPIO/ADC |
| دبوس 48 | PC2 — GPIO/ADC |
| دبوس 49 | PC3 — GPIO/ADC |
| دبوس 50 | PC4 — GPIO/ADC |
| دبوس 51 | PC5 — GPIO/ADC |
| دبوس 52 | PC6 — GPIO/TIM3_CH1 |
| دبوس 53 | PC7 — GPIO/TIM3_CH2 |
| دبوس 54 | PC8 — GPIO/TIM3_CH3 |
| دبوس 55 | PC9 — GPIO/TIM3_CH4 |
| دبوس 56 | PC10 — GPIO/USART4_TX |
| دبوس 57 | PC11 — GPIO/USART4_RX |
| دبوس 58 | PC12 — GPIO/USART5_TX |
| دبوس 59 | PC13 — GPIO/RTC_TAMP1 |
| دبوس 60 | PC14 — GPIO/OSC32_IN |
| دبوس 61 | PC15 — GPIO/OSC32_OUT |
| دبوس 62 | VDD — Digital power supply |
| دبوس 63 | VSS — Digital ground |
| دبوس 64 | VDD — Digital power supply |
التطبيقات النموذجية
STM32F730R8T6 مناسب لـ 6 التطبيقs: Industrial Control, IoT Gateway, Motor Drive, Audio Processing, Consumer Electronics, Medical Devices.
Industrial Control
The STM32F730R8T6 is ideal for industrial control systems due to its high-speed Cortex-M7 core, advanced timers, and multiple communication interfaces. It can handle complex control loops, PLCs, and motor drives with precision. The 216 MHz clock and FPU enable real-time processing of sensor data and control algorithms. In a typical industrial control application, the MCU interfaces with sensors, actuators, and HMI via USART, SPI, and CAN. The multiple ADCs allow simultaneous sampling of current and voltage for accurate motor control. The device's robust operating temperature range and industrial-grade reliability make it suitable for factory automation and process control.
موصى به
IoT Gateway
The STM32F730R8T6 is well-suited for IoT gateways that require high processing power and multiple connectivity options. Its USB OTG, Ethernet (via external PHY), and various serial interfaces allow it to aggregate data from multiple sensors and communicate with cloud services. The cryptographic acceleration unit enhances security for data transmission. In an IoT gateway, the MCU manages MQTT/HTTP protocols, handles sensor data aggregation, and controls local actuators. The 256 KB SRAM provides ample buffer for network packets and data logging. The low-power modes help optimize energy consumption in always-on gateway applications.
موصى به
Motor Drive
The STM32F730R8T6 excels in motor drive applications, including BLDC, PMSM, and stepper motors. Its high-speed PWM timers, multiple ADCs, and FPU enable field-oriented control (FOC) algorithms. The 216 MHz clock ensures fast loop execution, while the advanced timers generate precise PWM signals. In a motor drive, the MCU reads current sensors via ADCs, computes the control algorithm, and outputs PWM to the gate driver. The device's multiple timers can handle different motor phases independently. The cryptographic unit is not typically used here, but the rich peripheral set simplifies the overall design.
موصى به
Audio Processing
The STM32F730R8T6 is suitable for audio processing applications such as audio effects, voice recognition, and audio streaming. The Cortex-M7 core with FPU and DSP instructions can handle real-time audio algorithms like filtering, equalization, and compression. The I2S interface connects to audio codecs, and the DMA controller efficiently transfers audio data. In an audio application, the MCU reads audio samples from an ADC or I2S, processes them, and outputs to a DAC or amplifier. The 256 KB SRAM can buffer audio frames, and the high clock speed ensures low latency. The device's low noise and high performance make it ideal for high-fidelity audio systems.
موصى به
Consumer Electronics
The STM32F730R8T6 is used in consumer electronics like smart home devices, wearables, and gaming peripherals. Its low power consumption, rich connectivity, and compact LQFP-64 package make it ideal for space-constrained designs. The USB OTG allows direct connection to smartphones or PCs. In a smart home device, the MCU handles sensor reading, user interface, and wireless communication via external modules. The cryptographic unit secures data, and the multiple timers manage time-based events. The device's wide voltage range supports battery operation.
موصى به
Medical Devices
The STM32F730R8T6 is suitable for medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high processing power and analog peripherals enable accurate signal acquisition and processing. The device's reliability and long-term availability are critical for medical applications. In a patient monitor, the MCU reads vital signs from sensors, processes the data, and displays it on a screen. The multiple ADCs can sample ECG, SpO2, and temperature simultaneously. The cryptographic unit ensures data security for patient records. The device's low power consumption is beneficial for portable medical devices.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ STM32F730R8T6 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | STM32F730R8T6 | STM32F730R8T6 | STM32F730R8T6 |
|---|---|---|---|---|
| Package | LQFP-64 | LQFP-64 | LQFP-64 | LQFP-64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Max Clock Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 64 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 512 KB |
| Operating Voltage | 1.7V to 3.6V | 1.7V to 3.6V | 1.7V to 3.6V | 1.7V to 3.6V |
| GPIO Pins | 50 | 50 | 50 | 50 |
أبرز الفروقات
- Higher clock frequency than many competitors (مقابلSTM32F730R8T6)
- Integrated cryptographic acceleration (مقابلSTM32F730R8T6)
- Rich connectivity options (مقابلSTM32F730R8T6)
ملاحظات التصميم
Ensure all VDD and VDDA pins are connected to a clean power supply with decoupling capacitors (100nF and 4.7uF) placed close to the pins. The device operates from 1.7V to 3.6V, and proper decoupling is critical for stable operation, especially when using the ADC and DAC peripherals.
For the LQFP-64 package, use a 4-layer PCB with a solid ground plane. Place the crystal oscillator and load capacitors close to the OSC_IN/OSC_OUT pins to minimize parasitic capacitance. Keep high-speed communication lines (USB, Ethernet) impedance-matched and away from noisy traces.
Do not leave unused GPIO pins floating; configure them as outputs or enable internal pull-ups/pull-downs to avoid excessive current consumption. Also, ensure the NRST pin is properly pulled up with a 100nF capacitor to ground to prevent spurious resets.
معلومات الامتثال
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32F7 automotive-grade variants.
