STM32F730R8T6 - 32-bit ARM Cortex-M7 MCU 64-pin LQFP | STMicroelectronics
MPN: STM32F730R8T6 ✓ AktifSTM32F730R8T6 Ringkasan
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F730R8T6 belongs to the STM32F7 family, which is positioned as a high-performance MCU line within the broader STM32 ecosystem. The Cortex-M7 core is a high-performance 32-bit processor that supports DSP instructions and a floating-point unit (FPU), making it suitable for digital signal processing and control applications.
Key features of the STM32F730R8T6 include a 216 MHz Cortex-M7 core with double-precision FPU, 64 KB Flash, 256 KB SRAM, and a comprehensive set of peripherals. It supports a wide range of communication interfaces including USART, SPI, I2C, USB OTG HS/FS, CAN, and SDMMC. The device also includes advanced analog peripherals such as 12-bit ADCs and DACs, as well as timers, PWM channels, and a cryptographic acceleration unit. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C.
The STM32F730R8T6 is built on STMicroelectronics' advanced 90nm process technology, offering a balance of performance and power efficiency. The Cortex-M7 core with FPU and DSP instructions enables efficient execution of complex algorithms, while the ART Accelerator™ ensures zero-wait-state execution from Flash memory. The device also features a memory protection unit (MPU), a direct memory access (DMA) controller, and a flexible clock tree with multiple PLLs.
Typical applications include industrial control, motor drives, IoT gateways, audio processing, and consumer electronics. The rich connectivity and high processing power make it suitable for applications requiring real-time control and communication. For example, in industrial automation, the STM32F730R8T6 can handle complex control loops and communicate over multiple protocols simultaneously.
When designing with this device, ensure proper decoupling of the power supply pins and a stable clock source. The internal RC oscillator can be used for basic operation, but an external crystal is recommended for applications requiring precise timing. The device supports various low-power modes, which can be leveraged to optimize energy consumption in battery-powered applications.
Alternatif penggantian untuk STM32F730R8T6 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
STM32F730R8T6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →STM32F730R8T6 Rating Maksimal & Karakteristik Listrik
| Core | ARM Cortex-M7 |
| Frekuensi Bawah Maximum | 216 MHz |
| Flash Memory | 64 KB |
| SRAM | 256 KB |
| Paket | LQFP-64 |
| Operating Voltage | 1.7 V to 3.6 V |
| Suhu Kerja | -40°C to +85°C |
| GPIO Pins | 50 |
| ADC | 3x 12-bit, up to 16 channels |
| DAC | 2x 12-bit |
| Timers | 12x 16-bit, 2x 32-bit |
| Communication Interfaces | USART, SPI, I2C, USB OTG HS/FS, CAN, SDMMC |
| DMA | 2x DMA controllers with 16 streams |
| Cryptographic Acceleration | AES, DES, 3DES, SHA-1, SHA-256 |
| Status RoHS | Compliant |
Konfigurasi Pin STM32F730R8T6
| Pin produk 1 | VBAT — Backup battery supply |
| Pin produk 2 | PC13 — GPIO or RTC output |
| Pin produk 3 | PC14 — GPIO or OSC32_IN |
| Pin produk 4 | PC15 — GPIO or OSC32_OUT |
| Pin produk 5 | PF0 — GPIO |
| Pin produk 6 | PF1 — GPIO |
| Pin produk 7 | NRST — Reset (active low) |
| Pin produk 8 | VSSA — Analog ground |
| Pin produk 9 | VDDA — Analog power supply |
| Pin produk 10 | PA0 — GPIO/ADC |
| Pin produk 11 | PA1 — GPIO/ADC |
| Pin produk 12 | PA2 — GPIO/USART2_TX |
| Pin produk 13 | PA3 — GPIO/USART2_RX |
| Pin produk 14 | PA4 — GPIO/SPI1_NSS |
| Pin produk 15 | PA5 — GPIO/SPI1_SCK |
| Pin produk 16 | PA6 — GPIO/SPI1_MISO |
| Pin produk 17 | PA7 — GPIO/SPI1_MOSI |
| Pin produk 18 | PA8 — GPIO/USART1_CK |
| Pin produk 19 | PA9 — GPIO/USART1_TX |
| Pin produk 20 | PA10 — GPIO/USART1_RX |
| Pin produk 21 | PA11 — GPIO/USB_DM |
| Pin produk 22 | PA12 — GPIO/USB_DP |
| Pin produk 23 | PA13 — GPIO/SWDIO |
| Pin produk 24 | PA14 — GPIO/SWCLK |
| Pin produk 25 | PA15 — GPIO/JTDI |
| Pin produk 26 | VDD — Digital power supply |
| Pin produk 27 | VSS — Digital ground |
| Pin produk 28 | PB0 — GPIO/ADC |
| Pin produk 29 | PB1 — GPIO/ADC |
| Pin produk 30 | PB2 — GPIO |
| Pin produk 31 | PB3 — GPIO/JTDO |
| Pin produk 32 | PB4 — GPIO/NJTRST |
| Pin produk 33 | PB5 — GPIO/I2C1_SMBA |
| Pin produk 34 | PB6 — GPIO/I2C1_SCL |
| Pin produk 35 | PB7 — GPIO/I2C1_SDA |
| Pin produk 36 | PB8 — GPIO/I2C1_SCL |
| Pin produk 37 | PB9 — GPIO/I2C1_SDA |
| Pin produk 38 | PB10 — GPIO/I2C2_SCL |
| Pin produk 39 | PB11 — GPIO/I2C2_SDA |
| Pin produk 40 | VDD — Digital power supply |
| Pin produk 41 | VSS — Digital ground |
| Pin produk 42 | PB12 — GPIO/SPI2_NSS |
| Pin produk 43 | PB13 — GPIO/SPI2_SCK |
| Pin produk 44 | PB14 — GPIO/SPI2_MISO |
| Pin produk 45 | PB15 — GPIO/SPI2_MOSI |
| Pin produk 46 | PC0 — GPIO/ADC |
| Pin produk 47 | PC1 — GPIO/ADC |
| Pin produk 48 | PC2 — GPIO/ADC |
| Pin produk 49 | PC3 — GPIO/ADC |
| Pin produk 50 | PC4 — GPIO/ADC |
| Pin produk 51 | PC5 — GPIO/ADC |
| Pin produk 52 | PC6 — GPIO/TIM3_CH1 |
| Pin produk 53 | PC7 — GPIO/TIM3_CH2 |
| Pin produk 54 | PC8 — GPIO/TIM3_CH3 |
| Pin produk 55 | PC9 — GPIO/TIM3_CH4 |
| Pin produk 56 | PC10 — GPIO/USART4_TX |
| Pin produk 57 | PC11 — GPIO/USART4_RX |
| Pin produk 58 | PC12 — GPIO/USART5_TX |
| Pin produk 59 | PC13 — GPIO/RTC_TAMP1 |
| Pin produk 60 | PC14 — GPIO/OSC32_IN |
| Pin produk 61 | PC15 — GPIO/OSC32_OUT |
| Pin produk 62 | VDD — Digital power supply |
| Pin produk 63 | VSS — Digital ground |
| Pin produk 64 | VDD — Digital power supply |
Aplikasi Umum
STM32F730R8T6 cocok untuk 6 aplikasis: Industrial Control, IoT Gateway, Motor Drive, Audio Processing, Consumer Electronics, Medical Devices.
Industrial Control
The STM32F730R8T6 is ideal for industrial control systems due to its high-speed Cortex-M7 core, advanced timers, and multiple communication interfaces. It can handle complex control loops, PLCs, and motor drives with precision. The 216 MHz clock and FPU enable real-time processing of sensor data and control algorithms. In a typical industrial control application, the MCU interfaces with sensors, actuators, and HMI via USART, SPI, and CAN. The multiple ADCs allow simultaneous sampling of current and voltage for accurate motor control. The device's robust operating temperature range and industrial-grade reliability make it suitable for factory automation and process control.
Direkomendasikan
IoT Gateway
The STM32F730R8T6 is well-suited for IoT gateways that require high processing power and multiple connectivity options. Its USB OTG, Ethernet (via external PHY), and various serial interfaces allow it to aggregate data from multiple sensors and communicate with cloud services. The cryptographic acceleration unit enhances security for data transmission. In an IoT gateway, the MCU manages MQTT/HTTP protocols, handles sensor data aggregation, and controls local actuators. The 256 KB SRAM provides ample buffer for network packets and data logging. The low-power modes help optimize energy consumption in always-on gateway applications.
Direkomendasikan
Motor Drive
The STM32F730R8T6 excels in motor drive applications, including BLDC, PMSM, and stepper motors. Its high-speed PWM timers, multiple ADCs, and FPU enable field-oriented control (FOC) algorithms. The 216 MHz clock ensures fast loop execution, while the advanced timers generate precise PWM signals. In a motor drive, the MCU reads current sensors via ADCs, computes the control algorithm, and outputs PWM to the gate driver. The device's multiple timers can handle different motor phases independently. The cryptographic unit is not typically used here, but the rich peripheral set simplifies the overall design.
Direkomendasikan
Audio Processing
The STM32F730R8T6 is suitable for audio processing applications such as audio effects, voice recognition, and audio streaming. The Cortex-M7 core with FPU and DSP instructions can handle real-time audio algorithms like filtering, equalization, and compression. The I2S interface connects to audio codecs, and the DMA controller efficiently transfers audio data. In an audio application, the MCU reads audio samples from an ADC or I2S, processes them, and outputs to a DAC or amplifier. The 256 KB SRAM can buffer audio frames, and the high clock speed ensures low latency. The device's low noise and high performance make it ideal for high-fidelity audio systems.
Direkomendasikan
Consumer Electronics
The STM32F730R8T6 is used in consumer electronics like smart home devices, wearables, and gaming peripherals. Its low power consumption, rich connectivity, and compact LQFP-64 package make it ideal for space-constrained designs. The USB OTG allows direct connection to smartphones or PCs. In a smart home device, the MCU handles sensor reading, user interface, and wireless communication via external modules. The cryptographic unit secures data, and the multiple timers manage time-based events. The device's wide voltage range supports battery operation.
Direkomendasikan
Medical Devices
The STM32F730R8T6 is suitable for medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high processing power and analog peripherals enable accurate signal acquisition and processing. The device's reliability and long-term availability are critical for medical applications. In a patient monitor, the MCU reads vital signs from sensors, processes the data, and displays it on a screen. The multiple ADCs can sample ECG, SpO2, and temperature simultaneously. The cryptographic unit ensures data security for patient records. The device's low power consumption is beneficial for portable medical devices.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32F730R8T6 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32F730R8T6 | STM32F730R8T6 | STM32F730R8T6 |
|---|---|---|---|---|
| Package | LQFP-64 | LQFP-64 | LQFP-64 | LQFP-64 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Max Clock Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 64 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 512 KB |
| Operating Voltage | 1.7V to 3.6V | 1.7V to 3.6V | 1.7V to 3.6V | 1.7V to 3.6V |
| GPIO Pins | 50 | 50 | 50 | 50 |
Diferensiator Kunci
- Higher clock frequency than many competitors (vsSTM32F730R8T6)
- Integrated cryptographic acceleration (vsSTM32F730R8T6)
- Rich connectivity options (vsSTM32F730R8T6)
Catatan Desain
Ensure all VDD and VDDA pins are connected to a clean power supply with decoupling capacitors (100nF and 4.7uF) placed close to the pins. The device operates from 1.7V to 3.6V, and proper decoupling is critical for stable operation, especially when using the ADC and DAC peripherals.
For the LQFP-64 package, use a 4-layer PCB with a solid ground plane. Place the crystal oscillator and load capacitors close to the OSC_IN/OSC_OUT pins to minimize parasitic capacitance. Keep high-speed communication lines (USB, Ethernet) impedance-matched and away from noisy traces.
Do not leave unused GPIO pins floating; configure them as outputs or enable internal pull-ups/pull-downs to avoid excessive current consumption. Also, ensure the NRST pin is properly pulled up with a 100nF capacitor to ground to prevent spurious resets.
Informasi Konformitas
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified; for automotive, consider STM32F7 automotive-grade variants.
