STM32F767VIT6 - 216MHz Cortex-M7 MCU | STMicroelectronics
MPN: STM32F767VIT6 ✓ نشطSTM32F767VIT6 نظرة عامة
A microcontroller such as the STM32F767VIT6 is a complete programmable control platform containing a processor core, memory, communication interfaces, timers, analog peripherals, and general-purpose input/output. The STM32F7 family is used where performance, real-time control, connectivity, and system integration matter more than the lowest possible unit cost or power consumption.
The verified product data identifies a 216 MHz operating frequency, 2 MB Flash configuration, and a 100-LQFP package. The STM32F7 platform is also described by STMicroelectronics as featuring an Arm Cortex-M7 32-bit MCU with FPU capability and up to 462 DMIPS. Its performance-oriented design makes it suitable for industrial control, communications, audio and digital signal processing, networking, and connected embedded equipment.
The STM32F767VIT6 belongs to a family of devices based on the Arm Cortex-M7 core, providing a common hardware and software platform for control, connectivity, and real-time processing tasks. Designers should allocate memory and peripheral resources according to the specific STM32F767xx device variant and verify the complete pinout, electrical limits, startup requirements, and peripheral availability against the manufacturer datasheet before layout release.
Typical applications include industrial automation controllers, communications equipment, motor-control systems, audio processors, HMI platforms, and connected sensors. The 100-LQFP package provides a practical land pattern for designs requiring many external connections while avoiding the mechanical complexity of very fine-pitch BGA packages. The device is appropriate when firmware requires substantial processing performance and a broad peripheral set in a conventional surface-mount package.
When designing around the STM32F767VIT6, verify the exact package pin assignments, power requirements, clock configuration, memory organization, and unused-pin handling. Decoupling, exposed-ground layout, signal integrity, and firmware configuration remain important because a high-performance MCU can require careful clock, power, and peripheral planning even when the application is primarily control-oriented.
This page consolidates verified manufacturer and distributor information with package, sourcing, design, application, and comparison guidance to support faster engineering evaluation.
بدائل مباشرة لـ STM32F767VIT6 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع STM32F767VIT6 (نفس عامل الشكل والبصمة) — يختلف في Package, Flash Memory, SRAM, Supply Voltage, ADC.
STM32F767VIT7
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F765VIT6
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F7767VGT6
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
STM32F746VGT6
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F767VIT6 الحدود القصوى والخصائص الكهربائية
| Product Type | 32-bit microcontroller MCU |
| Processor Core | Arm Cortex-M7 |
| Architecture | 32-bit RISC |
| Maximum Operating Frequency | 216 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 |
| العلبة | 100-LQFP |
| Package Dimensions | 14 x 14 mm |
| Instruction Set | Arm Cortex-M7 32-bit |
| DSP Capability | DSP and FPU capability |
| Performance | Up to 462 DMIPS |
| نوع التركيب | Surface Mount |
| Core Family | STM32F7 |
| Series | STM32F767xx |
دليل تكوين أطراف STM32F767VIT6 14 x 14 mm
تكوين الأطراف لـ STM32F767VIT6 (حزمة 14 x 14 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ STM32F767VIT6.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
STM32F767VIT6 مناسب لـ 7 التطبيقs: Industrial Automation Controllers, Communications Equipment, Audio and DSP Processing, Motor Control Systems, Human-Machine Interfaces, Connected Sensor Systems, Embedded Test and Measurement.
Industrial Automation Controllers
The STM32F767VIT6 fits industrial automation controllers that combine real-time control with communications and data acquisition. Its Arm Cortex-M7 core operates up to 216 MHz, while the STM32F7 family is described as supporting FPU and DSP capability and up to 462 DMIPS. A controller can use the MCU for sensor processing, actuator sequencing, state-machine logic, and protocol handling in a compact 100-LQFP package. The 2 MB Flash provides room for application firmware, communication stacks, and boot logic. Before layout release, verify the exact peripheral set, operating voltage, temperature range, pin multiplexing, and industrial qualification requirements in the manufacturer datasheet.
موصى به
Communications Equipment
The STM32F767VIT6 is suitable for communications equipment requiring real-time processing and flexible peripheral integration. The 216 MHz Cortex-M7 core can handle protocol state machines, packet processing, buffering, and supervisory tasks, while the 2 MB Flash supports embedded firmware and communication stacks. Its 100-LQFP 14 x 14 mm package offers a conventional surface-mount assembly option for boards requiring more pins than a small leadless package. For Ethernet, USB, or other high-speed interfaces, engineers must confirm availability, signal requirements, and alternate-function assignments for the exact STM32F767VIT6 variant rather than assuming them from the family name.
موصى به
Audio and DSP Processing
The STM32F767VIT6 can serve as the control and digital signal-processing controller in audio equipment because the STM32F7 platform combines a Cortex-M7 core with DSP and FPU capability. The verified family information states up to 462 DMIPS, providing a useful indication of processing capacity for real-time filtering, mixing, control, and interface tasks. The 2 MB Flash can hold control firmware and signal-processing code, while the 100-LQFP package provides external peripheral connectivity. Audio-clock accuracy, codec interface support, analog sections, memory bandwidth, and electromagnetic performance must be verified against the complete STM32F767xx datasheet.
موصى به
Motor Control Systems
The STM32F767VIT6 is appropriate for motor-control systems that need high-speed computation alongside multiple timers, communication interfaces, and control peripherals. Its 216 MHz Cortex-M7 performance can support current sampling, commutation logic, fault handling, and supervisory functions in compact embedded motor drives. The STM32F7 family’s DSP and FPU capability can be useful for control algorithms involving filtering and arithmetic. The exact timer channels, complementary outputs, analog inputs, encoder interfaces, voltage limits, and thermal conditions must be confirmed for the STM32F767VIT6. Power-stage design and safety validation remain separate from MCU selection.
موصى به
Human-Machine Interfaces
The STM32F767VIT6 can support human-machine interface designs that combine display updates, touch or keypad input, communications, and application control. The 216 MHz Cortex-M7 core provides processing margin for graphical front ends, protocol conversion, data logging, and supervisory logic, while 2 MB Flash supports a larger embedded application. Its 100-LQFP package is useful when the board requires numerous external connections and avoids a BGA assembly process. The designer should confirm LCD or touch-interface availability, DMA requirements, external memory support, pin assignment, and electrical limits for the exact STM32F767xx device.
موصى به
Connected Sensor Systems
The STM32F767VIT6 can act as the local controller in a connected sensor or condition-monitoring system. It can combine sensor acquisition, filtering, threshold logic, data formatting, network management, and local storage in one device. The 2 MB Flash supports embedded firmware, while the STM32F7 family’s Cortex-M7, DSP, and FPU capability can help process time-domain or frequency-domain data efficiently. The 100-LQFP package provides a manageable assembly option for boards with multiple external connections. Verify ADC characteristics, timer resources, communication interfaces, memory requirements, low-power behavior, and sensor-specific timing before using the MCU as a production platform.
موصى به
Embedded Test and Measurement
The STM32F767VIT6 is suitable for embedded measurement instruments that need a fast control processor alongside data acquisition, storage, communications, and user interaction. Its 216 MHz Cortex-M7 core and STM32F7 DSP/FPU capability can support signal conditioning, calibration, real-time analysis, and instrument control functions. The 2 MB Flash can hold firmware and configuration data, while the 100-LQFP package supports external converters, memories, displays, and communications. For precision measurements, verify ADC and DAC availability, reference accuracy, clock-jitter behavior, analog supply requirements, timing specifications, and thermal conditions directly in the manufacturer documentation.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ STM32F767VIT6 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | STM32F767VIT7 | STM32F765VIT6 | STM32F7767VGT6 | STM32F746VGT6 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-LQFP | 100-LQFP | 100-LQFP | 100-LQFP | 100-LQFP |
أبرز الفروقات
- Verified 216 MHz Cortex-M7 performance position (مقابلSTM32F765VIT6)
- 2 MB Flash resource for larger embedded applications (مقابلSTM32F746VGT6)
- 100-LQFP package with 14 x 14 mm dimensions (مقابلSTM32F767VIT7)
- Sourcing reference from multiple distributor channels (مقابلSTM32F765VIT6)
ملاحظات التصميم
Use the manufacturer power-supply recommendations for the STM32F767VIT6 rather than relying on family-level assumptions. Place all required decoupling capacitors close to the device power pins, route high-current paths with adequate copper area, and keep analog and digital returns as controlled as the selected reference design requires. Verify the device's permitted voltage, current, power-up sequence, and external regulator tolerances in the STM32F767xx datasheet before schematic release.
Design the 100-LQFP footprint and escape routing around the exact pin assignment and exposed or connected ground requirements shown in the manufacturer package drawing. Confirm pin 1 orientation, lead pitch, pad dimensions, solder-mask clearance, and copper keepouts with the assembly house. Because this is a high-pin-count MCU, use a stable ground plane, short return paths, and controlled impedance routing for high-speed communication or memory signals.
Treat clock, communication, debug, and high-speed peripheral routes as potential signal-integrity risks. Keep clocks away from noisy switching nodes, provide continuous reference planes where appropriate, and validate timing margins using the actual firmware configuration and external component values. The Cortex-M7 core can operate up to 216 MHz according to the verified listing, so timing and edge-rate assumptions should be checked against the complete electrical specification rather than inferred from CPU frequency alone.
Do not select a replacement MCU from the processor family or package appearance alone. Check Flash size, RAM size, peripheral availability, pin alternate functions, voltage limits, temperature grade, qualification, startup behavior, and boot configuration. The related STM32F7 candidates in this record require manufacturer-level comparison because the supplied web snippets do not establish full pin-to-pin equivalence or all operating limits.
معلومات الامتثال
Compliance fields are unknown because the verified web data does not explicitly provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Verify these requirements with STMicroelectronics or the applicable distributor documentation.
