STMicroelectronics

STM32L083RZT6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

MPN: STM32L083RZT6 ✓ نشط
3 V Vdss 64-LQFP (10 mm x 10 mm) Package 32 MHz Speed 192 KB Memory
الحد الأدنى للطلب: 1 |

STM32L083RZT6 نظرة عامة

The STMicroelectronics STM32L083RZT6 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz maximum CPU frequency, 192 KB of Flash memory, USB connectivity, and a 64-LQFP package measuring 10 mm by 10 mm. It combines an Arm Cortex-M0+ core with embedded security, LCD, and USB functions for compact low-power embedded systems.

An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption during active operation, sleep, and low-power standby states. The STM32L083 belongs to the STM32L0 family of 32-bit Arm Cortex-M0+ microcontrollers, combining general-purpose processing, memory, communication peripherals, and low-power management within one device. This integration can reduce board size, component count, and system complexity in battery-powered equipment.

The device provides 192 KB of Flash memory organized as 192K by 8 bits and operates at up to 32 MHz. Its feature set includes USB 2.0, LCD support, AES encryption hardware, and crystal-less USB operation as identified by STMicroelectronics. These capabilities suit applications that require local data processing, secure communication, and direct human-interface or display connectivity without a separate host processor.

The Cortex-M0+ architecture uses a compact instruction set optimized for cost-sensitive embedded control. Its 32-bit registers and Thumb-2 instruction support improve computational efficiency while retaining a small silicon footprint. The STM32L083RZT6 also belongs to the STM32L0 low-power product family, where energy-conscious mode selection and peripheral clock control are central design considerations for portable equipment.

Typical uses include USB-connected portable instruments, compact industrial sensors, low-power data loggers, display controllers, security-sensitive accessories, and battery-operated IoT nodes. USB can simplify wired synchronization with a host computer, while LCD and AES support help implement human-readable, protected products without requiring several separate companion integrated circuits.

When planning a PCB, preserve the exposed-pad and thermal requirements defined for the 64-LQFP package and follow the manufacturer land-pattern guidance. Place decoupling capacitors close to the supply pins, route sensitive analog and clock connections away from fast digital signals, and confirm the firmware startup and clock configuration before enabling USB or LCD functions.

This product page combines the manufacturer’s device overview with practical interface, package, sourcing, and replacement guidance. It also organizes the STM32L083RZT6’s principal memory, connectivity, security, and low-power characteristics for faster engineering evaluation and PCB planning.

بدائل مباشرة لـ STM32L083RZT6 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع STM32L083RZT6 (نفس عامل الشكل والبصمة) — يختلف في Package, Flash Organization, Product Type, Supply Voltage, USB Clocking.

STMicroelectronics
Package: 64-LQFP (10 x 10 mm)
Flash Organization: 192K x 8
Product Type: Ultra-low-power 32-bit microcontroller
قارن مع STM32L083RZT6 →
STMicroelectronics
Package: LQFP-64 (10x10 mm)
Supply Voltage: 1.8 V to 3.6 V
قارن مع STM32L083RZT6 →

STM32L071RZT6

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 64-LQFP (10 mm x 10 mm)
CPU frequency and 192 KB Flash match at 0% difference; USB and peripheral feature availability differ

📋 بديل مرجعي (غير موجود في الكتالوج)

STM32L072RZT6

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
STMicroelectronics
📦 64-LQFP (10 mm x 10 mm)
Ultra-low-power 32-bit microcontroller · STMicroelectronics · STM32L0 · Arm Cortex-M0+ · 32 MHz · 32-bit · 192 KB · 192K x 8

تواصل لمعرفة السعر

عرض ورقة البيانات ←

STM32L073RZT6

✅ بديل مباشر
STMicroelectronics
📦 64-LQFP (10 mm x 10 mm)
ARM Cortex-M0+ · 32 MHz · 192 KB · 20 KB · 1.8 V to 3.6 V · LQFP-64 (10x10 mm) · 51 · 1x 12-bit, 16 channels, with hardware oversampling

تواصل لمعرفة السعر

عرض ورقة البيانات ←

STM32L031RZT6

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 64-LQFP (10 mm x 10 mm)
Flash is 128 KB versus 192 KB, a 33% reduction; 32 MHz CPU frequency and package match

📋 بديل مرجعي (غير موجود في الكتالوج)

STM32L083RZT6 الحدود القصوى والخصائص الكهربائية

Product Type 32-bit ultra-low-power microcontroller
CPU Core Arm Cortex-M0+
CPU Architecture ARM 32-bit
Maximum CPU Frequency 32 MHz
Flash Memory 192 KB
Flash Organization 192K x 8 bits
أقصى تردد للساعة 32 MHz
العلبة 64-LQFP (10 mm x 10 mm)
عدد الدبابيس 64 pins
جهد التغذية 3 V
USB Interface USB 2.0
USB Clocking Crystal-less USB
LCD Support Yes
Hardware Encryption AES
نوع التركيب Surface mount

دليل تكوين أطراف STM32L083RZT6 64-lqfp (10 mm x 10 mm)

تكوين الأطراف لـ STM32L083RZT6 (حزمة 64-lqfp (10 mm x 10 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 64-lqfp (10 mm x 10 mm) لـ STM32L083RZT6

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ STM32L083RZT6.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

STM32L083RZT6 مناسب لـ 6 التطبيقs: USB-connected portable instruments, Battery-powered industrial sensor nodes, Local LCD control and human interfaces, AES-protected data loggers, USB accessories and configuration tools, Compact security and access-control modules.

📱

USB-connected portable instruments

The STM32L083RZT6 fits portable instruments that need local control, data acquisition, and a standard USB interface within a compact board. Its 32 MHz Arm Cortex-M0+ core provides processing headroom for sensor control, status handling, and compact user-interface logic, while 192 KB of Flash stores application firmware and calibration information. USB 2.0 and crystal-less USB operation can simplify synchronization with a host computer and reduce external clock complexity. The 64-LQFP package also provides enough pin count for USB signals, display or button inputs, serial peripherals, and multiple sensor connections. Design the USB routing with short controlled-impedance traces, provide local decoupling, and validate enumeration across the intended temperature and power conditions.

🏭

Battery-powered industrial sensor nodes

The STM32L083RZT6 is appropriate for industrial sensor nodes that combine low-power operation with a 32-bit control core and 192 KB of program memory. It can acquire sensor inputs, apply filtering, manage thresholds, and store diagnostic information without requiring a separate processor. The STM32L0 ultra-low-power architecture is especially relevant where the node spends most of its operating cycle in a low-energy state. USB 2.0 provides a practical configuration path for bench setup or wired synchronization, while AES hardware can protect locally stored or transmitted data when the firmware uses that peripheral. The 3 V operating point supports integration with low-voltage sensor and radio ecosystems. Validate the total energy budget across active, sleep, wake-up, and communication intervals rather than considering processor frequency alone.

📺

Local LCD control and human interfaces

The STM32L083RZT6 can control local LCD-based interfaces in meters, control panels, laboratory equipment, and compact consumer products. Its LCD support reduces the need for a separate display controller, while the 32 MHz Cortex-M0+ core can refresh the interface while handling measurements and button events. With 192 KB of Flash, firmware can include display rendering, local calibration, menus, and communication routines in one controller. The 64-LQFP package provides a useful pin budget for parallel or serial display interfaces, control signals, and communications. Designers should confirm the selected panel’s electrical interface, timing requirements, and segment or pixel count against the device documentation. PCB layout should keep display signals away from sensitive analog inputs and provide clean supply references to reduce visible interference.

🖥️

AES-protected data loggers

The STM32L083RZT6 suits compact data loggers that store sensitive measurements and benefit from hardware-assisted AES operations. Its 32-bit Cortex-M0+ core can manage sampling, timestamps, buffering, and record formatting, while 192 KB of Flash holds firmware and compact local metadata. The AES peripheral can reduce processor workload when the application encrypts stored blocks or protected communication data. USB 2.0 gives the logger a convenient path for configuration, data transfer, and firmware maintenance, and crystal-less USB operation can reduce external clock requirements. The 64-LQFP package leaves room for storage media, sensors, status indicators, and power-management connections. Engineer the firmware so cryptographic keys are provisioned securely, and validate the complete storage and USB workflow before field deployment.

🔧

USB accessories and configuration tools

The STM32L083RZT6 can serve as the central controller in USB accessories that need device control, secure data handling, and firmware-driven user interaction. The USB 2.0 peripheral supports a standard wired interface, and the 32 MHz Cortex-M0+ core is sufficient for command handling, configuration storage, status reporting, and peripheral coordination. Crystal-less USB operation can reduce the number of external clock components when supported by the selected firmware and operating conditions. AES hardware is valuable for accessories that handle credentials or protected configuration records. The 64-LQFP package provides additional I/O compared with small leadless packages, making it practical to connect buttons, indicators, sensors, and serial interfaces. Confirm USB impedance, ESD protection, power-source behavior, and host compatibility before production release.

🧩

Compact security and access-control modules

The STM32L083RZT6 is suitable for compact security and access-control modules that combine USB connectivity with hardware AES and low-power operation. The microcontroller can manage credential protocols, local event logic, status indicators, and configuration updates through its 32-bit Cortex-M0+ core. A 192 KB Flash budget allows application firmware, communication routines, and parameter storage to coexist in one device. USB provides a convenient service and commissioning interface, while AES hardware accelerates protected operations when implemented according to the manufacturer’s guidance. The 64-LQFP package accommodates security-sensitive signal partitioning, status outputs, and communication interfaces. Designers should define startup behavior, tamper-response requirements, key handling, and fail-safe pin states in hardware and firmware, then validate the completed module under reset, brownout, and communication-error conditions.

What are the key specifications of STM32L083RZT6?
The STM32L083RZT6 is a 32 MHz, 32-bit Arm Cortex-M0+ microcontroller with 192 KB of Flash memory in a 64-LQFP package. According to the STMicroelectronics STM32L083RZ product page, the device also provides USB 2.0 connectivity, crystal-less USB operation, LCD support, and AES encryption hardware. Its 10 mm by 10 mm package is intended for compact embedded and low-power products.
Where can I download the STM32L083RZT6 datasheet PDF?
The official STM32L083RZ product page provides the manufacturer documentation for the STM32L083RZT6 device family. Use the STM32L083RZ product page at st.com to access the datasheet and supporting technical documents. The exact ordering code should remain STM32L083RZT6 when checking electrical limits, package drawings, pin definitions, memory organization, and firmware-support information.
Where can I find the STM32L083RZT6 pinout?
The STM32L083RZT6 pinout is defined for a 64-LQFP package and should be taken from the manufacturer pin-description table in the STM32L083RZ datasheet. Use the table when assigning PCB nets because package drawings alone do not identify every peripheral alternate function, supply pin, ground pin, or no-connect position.
What is the STM32L083RZT6 used for?
The STM32L083RZT6 is used for compact embedded systems requiring a 32 MHz Arm Cortex-M0+ core, USB connectivity, LCD control, and hardware AES support. These characteristics fit portable instruments, industrial sensors, battery-powered loggers, display modules, and USB accessories. Its low-power MCU architecture supports designs where energy use and board area are primary constraints.
What is the flash memory capacity of STM32L083RZT6?
The STM32L083RZT6 contains 192 KB of Flash memory organized as 192K by 8 bits. This capacity supports embedded firmware, configuration data, and application code in a single package. The memory figure is identified in the manufacturer and distributor device descriptions, while RAM capacity and detailed memory-map information should be confirmed in the STM32L083RZ datasheet.
Does STM32L083RZT6 support USB and LCD?
Yes. The STM32L083RZT6 supports USB 2.0, crystal-less USB operation, and LCD functions. According to STMicroelectronics, crystal-less USB operation allows the device to use an internal clock source for USB communication. LCD support is useful for products with local displays, while USB provides a standard interface for configuration, synchronization, and data transfer.
What is the difference between STM32L083RZT6 and STM32L083RZT6TR?
The STM32L083RZT6 and STM32L083RZT6TR identify the same STM32L083RZ device family, while the suffix difference commonly reflects packaging or orderable configuration. Because tape-and-reel packaging suffixes do not add distinct electrical engineering value, the STM32L083RZT6TR part is not listed as a separate drop-in alternative. Confirm the exact temperature grade, packing form, and manufacturer ordering information before substitution.
Is STM32L083RZT6 suitable for battery-powered IoT devices?
The STM32L083RZT6 is suitable for battery-powered IoT devices because it belongs to STMicroelectronics’ ultra-low-power STM32L0 family and operates from a 3 V supply. Its 32 MHz Cortex-M0+ core provides processing capacity for sensor aggregation and local control. Final battery-life calculations should include the selected radio, sensor, regulator, sleep mode, wake-up frequency, and USB activity.
What is the best drop-in replacement for STM32L083RZT6?
The closest same-brand replacements are the 64-LQFP STM32L071RZT6, STM32L072RZT6, and STM32L073RZT6 devices, which share the 32 MHz Cortex-M0+ architecture and 192 KB Flash configuration. They are pin-oriented alternatives within the STM32L0 family, but peripheral availability can differ. Verify USB, LCD, AES, clock, and board-level requirements before treating any one as a drop-in replacement.
Can STM32L073RZT6 replace STM32L083RZT6?
The STM32L073RZT6 is a potential 64-LQFP, 192 KB Flash, 32 MHz Cortex-M0+ alternative, but it should be treated as a family-level substitution rather than automatically equivalent. According to STMicroelectronics’ STM32L0 portfolio organization, USB and other feature combinations differ across order codes. Confirm every used peripheral, pin alternate function, clock requirement, and software-support package in the manufacturer documentation.
What is the best NXP equivalent for STM32L083RZT6?
No NXP cross-brand drop-in equivalent is established for the STM32L083RZT6 by the available component cross-reference material. An NXP microcontroller may provide similar general-purpose functionality, but matching the 64-LQFP footprint alone does not establish pin-to-pin compatibility, peripheral equivalence, or firmware portability. Use the Request a Quote form on this page to request a documented second-source review with the required interface and memory profile.
Where can I buy STM32L083RZT6 online?
The STM32L083RZT6 can be requested through the Request a Quote form on this page. Submit the exact MPN, required quantity, target date, and acceptable packaging details so current commercial availability can be checked. The ordering code must remain STM32L083RZT6 because changes to the temperature, package, or shipment suffix can alter the manufacturer’s orderable configuration.
How much does STM32L083RZT6 cost?
Current commercial pricing for the STM32L083RZT6 is shown through the Request a Quote form on this page. Submit the quantity and required shipment details to obtain a current offer for the exact ordering code. Long-term production planning should also account for minimum order quantities, lead time, and any changes in lifecycle status or packaging requirements.
What is the lead time and stock status for STM32L083RZT6?
Current stock status and lead time should be confirmed through the Request a Quote form on this page. Include your required quantity, scheduled build date, approved vendor list, and packaging preference with the request. For production planning, use the exact STM32L083RZT6 ordering code because inventory and delivery commitments can vary with volume and date.
How should the STM32L083RZT6 USB circuit be designed?
The STM32L083RZT6 USB circuit should follow the manufacturer’s STM32L083RZ datasheet and USB implementation guidance. STMicroelectronics identifies crystal-less USB operation as a device feature, which can simplify clock arrangements, but the selected operating mode still requires correct voltage thresholds, signal routing, decoupling, firmware configuration, and connector protection. Review the latest USB implementation guidance before releasing the PCB.

بيانات مرجعية هندسية لـ STM32L083RZT6 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the STM32L083RZT6 when a design needs the combined benefits of a 32 MHz Arm Cortex-M0+ core, 192 KB of Flash, USB 2.0, LCD support, and AES hardware in a 64-LQFP package. The STM32L071RZT6, STM32L072RZT6, and STM32L073RZT6 are useful same-brand alternatives when their respective peripheral combinations cover the design, but their feature sets must be checked against every used interface. Select the STM32L031RZT6 only when its 128 KB Flash limit is sufficient and the missing target-device features are not needed. No documented cross-brand drop-in replacement is established for this ordering code. For any substitution, verify package pin functions, clock-tree requirements, USB behavior, LCD electrical requirements, security peripheral availability, software-device support, temperature grade, and lifecycle commitments.

المقارنة مع البدائل

المعامل هذا المنتج STM32L071RZT6 STM32L072RZT6 STM32L073RZT6 STM32L031RZT6
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 192 KB 192 KB 192 KB 192 KB 128 KB
Architecture 32-bit 32-bit 32-bit 32-bit 32-bit
Nominal Supply Voltage 3 V 3 V 3 V 3 V 3 V
Commercial Availability Request a Quote Request a Quote Request a Quote Request a Quote Request a Quote

أبرز الفروقات

  • Combines USB, LCD, and AES functions in one microcontroller (مقابلSTM32L031RZT6)
  • Full 192 KB Flash allocation for embedded firmware (مقابلSTM32L031RZT6)
  • 10 mm by 10 mm 64-LQFP package supports a broad I/O count (مقابلSTM32L073RZT6)

ملاحظات التصميم

Place the decoupling network close to each device supply pin and follow the manufacturer’s LQFP land pattern, including the exposed thermal pad and its required copper area. Keep USB traces short, continuous, and routed away from clocks, antenna structures, and switching-node circuitry. Confirm the exact pin and thermal-pad connections from the STM32L083RZ datasheet before releasing artwork because package drawings do not identify all alternate functions.

Design the 3 V power path around both average and peak operating demand. Decoupling must support the MCU, external peripherals, and USB transceiver circuitry without causing supply droop during USB enumeration or transmit bursts. Keep analog and digital return currents separated where the board has mixed signal sections, and use the device’s low-power modes only after measuring wake-up timing and peripheral leakage. Request current should be confirmed from the manufacturer documentation for the selected operating configuration.

USB routing requires controlled impedance, continuous reference planes, minimized stubs, and compliant connector protection. Even when crystal-less USB operation is used, the complete USB electrical design still requires attention to data-line geometry, supply behavior, ESD protection, and host compatibility. Review the latest manufacturer USB implementation guidance, validate signal integrity with suitable test equipment, and check enumeration over the intended voltage and temperature range.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact ordering code is stated in the manufacturer product information identified for this product. Request the current compliance documents through the Request a Quote form.

تم التحقق من البيانات في: 2026-11-14 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

STM32L083RZT6 datasheet STM32L083RZT6 pinout STM32L083RZT6 datasheet pdf STM32L083RZT6 equivalent STM32L083RZT6 replacement STM32L083RZT6 cross reference STM32L083RZT6 LQFP-64 pinout STM32L083RZT6 32MHz Cortex-M0+ STM32L083RZT6 USB LCD AES STMicroelectronics STM32L083RZT6 STM32L083RZT6 price STM32L083RZT6 stock STM32L083RZT6 vs STM32L073RZT6 STM32L083RZT6 USB application circuit

المكونات والمصطلحات ذات الصلة

STMicroelectronics STM32L083RZT6 STM32L083RZ STM32L0 STM32L071RZT6 STM32L072RZT6 STM32L073RZT6 STM32L031RZT6 Arm Cortex-M0+ Arm Cortex-M0+ core 32-bit microcontroller ultra-low-power microcontroller USB 2.0 crystal-less USB LCD controller AES encryption hardware 192 KB Flash 32 MHz 64-LQFP LQFP package family surface-mount package 3 V power supply embedded security human-machine interface
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر