STM32L083RZT6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
Артикул: STM32L083RZT6 ✓ АктивенSTM32L083RZT6 Обзор
An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption during active operation, sleep, and low-power standby states. The STM32L083 belongs to the STM32L0 family of 32-bit Arm Cortex-M0+ microcontrollers, combining general-purpose processing, memory, communication peripherals, and low-power management within one device. This integration can reduce board size, component count, and system complexity in battery-powered equipment.
The device provides 192 KB of Flash memory organized as 192K by 8 bits and operates at up to 32 MHz. Its feature set includes USB 2.0, LCD support, AES encryption hardware, and crystal-less USB operation as identified by STMicroelectronics. These capabilities suit applications that require local data processing, secure communication, and direct human-interface or display connectivity without a separate host processor.
The Cortex-M0+ architecture uses a compact instruction set optimized for cost-sensitive embedded control. Its 32-bit registers and Thumb-2 instruction support improve computational efficiency while retaining a small silicon footprint. The STM32L083RZT6 also belongs to the STM32L0 low-power product family, where energy-conscious mode selection and peripheral clock control are central design considerations for portable equipment.
Typical uses include USB-connected portable instruments, compact industrial sensors, low-power data loggers, display controllers, security-sensitive accessories, and battery-operated IoT nodes. USB can simplify wired synchronization with a host computer, while LCD and AES support help implement human-readable, protected products without requiring several separate companion integrated circuits.
When planning a PCB, preserve the exposed-pad and thermal requirements defined for the 64-LQFP package and follow the manufacturer land-pattern guidance. Place decoupling capacitors close to the supply pins, route sensitive analog and clock connections away from fast digital signals, and confirm the firmware startup and clock configuration before enabling USB or LCD functions.
This product page combines the manufacturer’s device overview with practical interface, package, sourcing, and replacement guidance. It also organizes the STM32L083RZT6’s principal memory, connectivity, security, and low-power characteristics for faster engineering evaluation and PCB planning.
Аналоги без доработки для STM32L083RZT6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32L083RZT6 (тот же форм-фактор и посадочное место) — отличается по Package, Flash Organization, Product Type, Supply Voltage, USB Clocking.
STM32L071RZT6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L072RZT6
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →STM32L073RZT6
✅ Прямая заменаУточнить цену
Открыть даташит →STM32L031RZT6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32L083RZT6 Максимальные параметры и электрические характеристики
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M0+ |
| CPU Architecture | ARM 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 192 KB |
| Flash Organization | 192K x 8 bits |
| Максимальная тактовая частота | 32 MHz |
| Корпус | 64-LQFP (10 mm x 10 mm) |
| Количество выводов | 64 pins |
| Напряжение питания | 3 V |
| USB Interface | USB 2.0 |
| USB Clocking | Crystal-less USB |
| LCD Support | Yes |
| Hardware Encryption | AES |
| Тип монтажа | Surface mount |
Руководство по цоколевке STM32L083RZT6 в корпусе 64-lqfp (10 mm x 10 mm)
Цоколевка для STM32L083RZT6 (корпус 64-lqfp (10 mm x 10 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для STM32L083RZT6.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
STM32L083RZT6 подходит для 6 применениеs: USB-connected portable instruments, Battery-powered industrial sensor nodes, Local LCD control and human interfaces, AES-protected data loggers, USB accessories and configuration tools, Compact security and access-control modules.
USB-connected portable instruments
The STM32L083RZT6 fits portable instruments that need local control, data acquisition, and a standard USB interface within a compact board. Its 32 MHz Arm Cortex-M0+ core provides processing headroom for sensor control, status handling, and compact user-interface logic, while 192 KB of Flash stores application firmware and calibration information. USB 2.0 and crystal-less USB operation can simplify synchronization with a host computer and reduce external clock complexity. The 64-LQFP package also provides enough pin count for USB signals, display or button inputs, serial peripherals, and multiple sensor connections. Design the USB routing with short controlled-impedance traces, provide local decoupling, and validate enumeration across the intended temperature and power conditions.
Рекомендуется
Battery-powered industrial sensor nodes
The STM32L083RZT6 is appropriate for industrial sensor nodes that combine low-power operation with a 32-bit control core and 192 KB of program memory. It can acquire sensor inputs, apply filtering, manage thresholds, and store diagnostic information without requiring a separate processor. The STM32L0 ultra-low-power architecture is especially relevant where the node spends most of its operating cycle in a low-energy state. USB 2.0 provides a practical configuration path for bench setup or wired synchronization, while AES hardware can protect locally stored or transmitted data when the firmware uses that peripheral. The 3 V operating point supports integration with low-voltage sensor and radio ecosystems. Validate the total energy budget across active, sleep, wake-up, and communication intervals rather than considering processor frequency alone.
Рекомендуется
Local LCD control and human interfaces
The STM32L083RZT6 can control local LCD-based interfaces in meters, control panels, laboratory equipment, and compact consumer products. Its LCD support reduces the need for a separate display controller, while the 32 MHz Cortex-M0+ core can refresh the interface while handling measurements and button events. With 192 KB of Flash, firmware can include display rendering, local calibration, menus, and communication routines in one controller. The 64-LQFP package provides a useful pin budget for parallel or serial display interfaces, control signals, and communications. Designers should confirm the selected panel’s electrical interface, timing requirements, and segment or pixel count against the device documentation. PCB layout should keep display signals away from sensitive analog inputs and provide clean supply references to reduce visible interference.
Рекомендуется
AES-protected data loggers
The STM32L083RZT6 suits compact data loggers that store sensitive measurements and benefit from hardware-assisted AES operations. Its 32-bit Cortex-M0+ core can manage sampling, timestamps, buffering, and record formatting, while 192 KB of Flash holds firmware and compact local metadata. The AES peripheral can reduce processor workload when the application encrypts stored blocks or protected communication data. USB 2.0 gives the logger a convenient path for configuration, data transfer, and firmware maintenance, and crystal-less USB operation can reduce external clock requirements. The 64-LQFP package leaves room for storage media, sensors, status indicators, and power-management connections. Engineer the firmware so cryptographic keys are provisioned securely, and validate the complete storage and USB workflow before field deployment.
Рекомендуется
USB accessories and configuration tools
The STM32L083RZT6 can serve as the central controller in USB accessories that need device control, secure data handling, and firmware-driven user interaction. The USB 2.0 peripheral supports a standard wired interface, and the 32 MHz Cortex-M0+ core is sufficient for command handling, configuration storage, status reporting, and peripheral coordination. Crystal-less USB operation can reduce the number of external clock components when supported by the selected firmware and operating conditions. AES hardware is valuable for accessories that handle credentials or protected configuration records. The 64-LQFP package provides additional I/O compared with small leadless packages, making it practical to connect buttons, indicators, sensors, and serial interfaces. Confirm USB impedance, ESD protection, power-source behavior, and host compatibility before production release.
Рекомендуется
Compact security and access-control modules
The STM32L083RZT6 is suitable for compact security and access-control modules that combine USB connectivity with hardware AES and low-power operation. The microcontroller can manage credential protocols, local event logic, status indicators, and configuration updates through its 32-bit Cortex-M0+ core. A 192 KB Flash budget allows application firmware, communication routines, and parameter storage to coexist in one device. USB provides a convenient service and commissioning interface, while AES hardware accelerates protected operations when implemented according to the manufacturer’s guidance. The 64-LQFP package accommodates security-sensitive signal partitioning, status outputs, and communication interfaces. Designers should define startup behavior, tamper-response requirements, key handling, and fail-safe pin states in hardware and firmware, then validate the completed module under reset, brownout, and communication-error conditions.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32L083RZT6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32L071RZT6 | STM32L072RZT6 | STM32L073RZT6 | STM32L031RZT6 |
|---|---|---|---|---|---|
| Package | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) | 64-LQFP (10 mm x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 192 KB | 192 KB | 192 KB | 192 KB | 128 KB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Nominal Supply Voltage | 3 V | 3 V | 3 V | 3 V | 3 V |
| Commercial Availability | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
Ключевые отличия
- Combines USB, LCD, and AES functions in one microcontroller (против STM32L031RZT6)
- Full 192 KB Flash allocation for embedded firmware (против STM32L031RZT6)
- 10 mm by 10 mm 64-LQFP package supports a broad I/O count (против STM32L073RZT6)
Заметки по проектированию
Place the decoupling network close to each device supply pin and follow the manufacturer’s LQFP land pattern, including the exposed thermal pad and its required copper area. Keep USB traces short, continuous, and routed away from clocks, antenna structures, and switching-node circuitry. Confirm the exact pin and thermal-pad connections from the STM32L083RZ datasheet before releasing artwork because package drawings do not identify all alternate functions.
Design the 3 V power path around both average and peak operating demand. Decoupling must support the MCU, external peripherals, and USB transceiver circuitry without causing supply droop during USB enumeration or transmit bursts. Keep analog and digital return currents separated where the board has mixed signal sections, and use the device’s low-power modes only after measuring wake-up timing and peripheral leakage. Request current should be confirmed from the manufacturer documentation for the selected operating configuration.
USB routing requires controlled impedance, continuous reference planes, minimized stubs, and compliant connector protection. Even when crystal-less USB operation is used, the complete USB electrical design still requires attention to data-line geometry, supply behavior, ESD protection, and host compatibility. Review the latest manufacturer USB implementation guidance, validate signal integrity with suitable test equipment, and check enumeration over the intended voltage and temperature range.
Информация о соответствии
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact ordering code is stated in the manufacturer product information identified for this product. Request the current compliance documents through the Request a Quote form.