STMicroelectronics

STM8S105K6T6CTR - 16MHz 8-Bit MCU, 32KB Flash | STMicroelectronics (Tape & Reel)

MPN: STM8S105K6T6CTR ✓ نشط
3.3 V to 5 V Vdss 32-pin LQFP Package 16 MHz Speed 32 KB Memory
الحد الأدنى للطلب: 1 |

STM8S105K6T6CTR نظرة عامة

The STMicroelectronics STM8S105K6T6CTR is an 8-bit STM8S access-line microcontroller operating at 16 MHz, with 32 KB of Flash program memory and integrated true data EEPROM in a 32-pin LQFP tray package. It supports operation from 3.3 V to 5 V, making it suitable for compact embedded-control systems that require deterministic performance and a broad peripheral set in a moderate-size surface-mount footprint.

An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, Flash memory, data memory, I/O ports, and embedded peripherals on one device. The STM8S105 access line belongs to the STM8 family of 8-bit microcontrollers and is positioned between the simpler STM8S105x4 devices with 16 KB of Flash and the STM8S105x6 devices with 32 KB of Flash. This hierarchy provides more application memory without moving to a larger 32-bit MCU architecture.

The STM8S105K6T6CTR combines a 16 MHz maximum clock with 32 KB of Flash program memory in 32 KB × 8 organization. Its integrated true data EEPROM supports nonvolatile data retention directly on the MCU, which is useful for calibration values, configuration records, counters, and serialized product data. The 3.3 V and 5 V operating range also supports both legacy 5 V systems and modern 3.3 V peripherals when the board-level limits are respected.

The STM8S105K6 architecture is based on the ST7 core described for the STM8S family and uses an 8-bit CISC instruction set. Compared with a small resource-constrained MCU, the 32 KB Flash option provides more room for application code, drivers, protocol handlers, and field-upgrade logic. Compared with a 32-bit MCU, it remains focused on lower-cost control tasks where an 8-bit CPU and simple embedded toolchain are sufficient.

Typical uses include appliance controllers, small sensor-hub nodes, keypad interfaces, LED-control boards, compact motor-control peripherals, and industrial automation modules. The 32-pin LQFP package exposes more I/O than smaller leadless packages and remains practical for prototype boards, automated assembly, and repair workflows where a leaded package improves visual inspection.

Designers should preserve the MCU power and decoupling layout shown in the manufacturer datasheet, verify the selected oscillator and reset implementation, and confirm every peripheral pin against the exact package drawing. Use the USB-to-UART programming interface and firmware configuration appropriate to the selected ST8 development toolchain, and allow for the operating-temperature grade denoted by the final order code.

This product page organizes the core device identity, verified specifications, sourcing information, engineering guidance, and same-family references in one place. It also highlights the practical differences among temperature-grade and Flash-density order codes so engineers can make a replacement decision without assuming that every STM8S105 variant is electrically interchangeable.

بدائل مباشرة لـ STM8S105K6T6CTR — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

STM8S105K6T3C

✅ بديل مباشر
📦 32-pin TQFP
Temperature-grade suffix changes from T6 to T3; core speed remains 16 MHz and Flash remains 32 KB

📋 بديل مرجعي (غير موجود في الكتالوج)

STM8S105C6T6C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 32-pin TQFP
C-package family designation replaces K while maintaining the 16 MHz architecture and 32 KB Flash configuration

📋 بديل مرجعي (غير موجود في الكتالوج)

STM8S105C6T3C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 32-pin TQFP
C-package family and T3 temperature grade replace the K-package T6 ordering code; core speed remains 16 MHz

📋 بديل مرجعي (غير موجود في الكتالوج)

STM8S105K6T6CTR الحدود القصوى والخصائص الكهربائية

Microcontroller Type 8-bit RISC/CISC access-line microcontroller
Product Series STM8S105
Maximum CPU Clock 16 MHz
Flash Program Memory 32 KB
Flash Organization 32K x 8
جهد التغذية 3.3 V to 5 V
Architecture 8-bit CISC with ST7 core
العلبة 32-pin LQFP
Package Type Tray
نوع التركيب Surface mount
عدد الأطراف 32 pins

دليل تكوين أطراف STM8S105K6T6CTR tray

تكوين الأطراف لـ STM8S105K6T6CTR (حزمة tray). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة tray لـ STM8S105K6T6CTR

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ STM8S105K6T6CTR.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

STM8S105K6T6CTR مناسب لـ 6 التطبيقs: Appliance Control Board, Sensor Hub and Condition Monitoring, LED Display and Indicator Control, Compact Industrial Automation Module, Keyboard and User Interface Controller, Battery-Powered Instrumentation.

🔧

Appliance Control Board

The STM8S105K6T6CTR fits appliance control boards that coordinate buttons, indicators, relays, sensors, and small motors through a deterministic embedded-control firmware. Its 16 MHz clock provides useful headroom for an 8-bit control loop, while 32 KB of Flash allows application logic, peripheral drivers, diagnostics, and communication handlers to coexist. Integrated true data EEPROM can retain settings or counters without adding an external memory device. The 3.3 V to 5 V range supports mixed legacy and modern board rails, subject to individual GPIO limits. Use the manufacturer pin table to assign the LQFP signals and keep the power, reset, clock, and programming routes within the documented layout.

🧩

Sensor Hub and Condition Monitoring

The STM8S105K6T6CTR can serve as the local controller in a compact sensor hub that gathers temperature, light, motion, or analog measurements and presents them through a serial interface. Its 32 KB Flash provides enough room for acquisition routines, calibration tables, filtering, diagnostics, and communication protocols, while integrated true data EEPROM is useful for sensor offsets or calibration identifiers. The 16 MHz maximum clock supports responsive sampling and control without the resource demands of a general-purpose processor. Keep analog and digital grounds arranged according to the manufacturer reference guidance, and verify each sensor interface voltage before connecting it to the 3.3 V to 5 V device.

💡

LED Display and Indicator Control

The STM8S105K6T6CTR is appropriate for LED matrix, status-indicator, and signage-control modules where the controller must sequence multiple outputs and respond to buttons or external commands. Its 8-bit architecture is well matched to byte-oriented display data, and the 16 MHz clock supports regular refresh timing and debounce handling. With 32 KB of Flash, firmware can include display patterns, animation tables, communication parsing, and diagnostic functions. Integrated true data EEPROM can preserve brightness, user configuration, or calibration information. Select the GPIO and timer assignments from the exact 32-pin LQFP datasheet, and account for LED driver voltage, current, and grounding rather than driving loads directly from MCU pins.

🏭

Compact Industrial Automation Module

The STM8S105K6T6CTR can support compact industrial automation modules that perform local sequencing, monitor discrete inputs, operate outputs, and expose diagnostics through a communication interface. Its 32 KB Flash accommodates a state machine, input filtering, event logging, and protocol handling, while the 16 MHz clock supports timely deterministic control. The 3.3 V to 5 V operating range allows integration with varied control boards, but industrial qualification requirements must be checked separately. Use galvanic isolation, surge protection, proper connector design, and robust grounding at the interface boundary. Firmware should include watchdog, brownout, and fault-state behavior appropriate to the equipment's safety requirements.

🔧

Keyboard and User Interface Controller

The STM8S105K6T6CTR is well suited to a dedicated keyboard, panel, or human-interface controller that scans switches, drives indicators, and manages serial commands. At up to 16 MHz, its 8-bit CPU can handle debounce, matrix scanning, and display updates concurrently. The 32 KB Flash budget allows room for multiple layouts, communication protocols, bootloader functions, and diagnostic counters, while true data EEPROM can store user-selected settings. The 32-pin LQFP provides a practical number of external connections for a control-oriented board. Validate active levels, pull components, and debounce strategy against the exact GPIO configuration, and apply ESD protection to connector-accessible inputs.

⚡

Battery-Powered Instrumentation

The STM8S105K6T6CTR can serve as the control core in battery-powered instrumentation or a portable measurement module when the design favors a simple 8-bit architecture and nonvolatile configuration storage. The 3.3 V operating capability is useful for systems using a regulated 3.3 V rail, and the integrated true data EEPROM can retain calibration or setup values between power cycles. The 16 MHz clock allows responsive control without requiring a high-performance processor. Low-power behavior still depends on the selected STM8S105 variant's clock-stop and peripheral configuration, so verify those modes in the manufacturer datasheet. Use the lowest suitable supply voltage, disable unused peripherals, and include a low-voltage threshold in the firmware.

ملخص المنتجات الموصى بها

STM8S105K6T3C Same-family K6 variant with a different temperature-grade suffix يُستخدم في: Appliance Control Board, Sensor Hub and Condition Monitoring, LED Display and Indicator Control, Keyboard and User Interface Controller, Battery-Powered Instrumentation STM8S105K4T6C STMicroelectronics يُستخدم في: Appliance Control Board, Sensor Hub and Condition Monitoring, LED Display and Indicator Control, Compact Industrial Automation Module, Keyboard and User Interface Controller, Battery-Powered Instrumentation STM8S105C4T6TR STMicroelectronics يُستخدم في: Compact Industrial Automation Module
What are the key specifications of STM8S105K6T6CTR that engineers should know?
The STM8S105K6T6CTR is an 8-bit STM8S microcontroller with a 16 MHz maximum clock, 32 KB of Flash program memory, integrated true data EEPROM, and a 3.3 V to 5 V operating range. It is packaged as a 32-pin LQFP in tray form. According to the STMicroelectronics STM8S105K6 product page, the device belongs to the STM8S105x4/6 access line, whose members provide 16 KB or 32 KB of Flash. These core figures determine its suitability for embedded control, appliance, sensor-interface, and compact automation designs.
What is the STM8S105K6T6CTR and what does it do?
The STM8S105K6T6CTR is an 8-bit embedded-control microcontroller that executes application code from 32 KB of Flash and uses integrated true data EEPROM for nonvolatile information retention. It runs at up to 16 MHz and operates from 3.3 V to 5 V. The manufacturer describes the STM8S105x4/6 family as an access line for compact control systems. Use it when a controller needs more program space than a 16 KB STM8S105x4 variant without requiring a more complex 32-bit MCU.
Where can I download the STM8S105K6T6CTR datasheet PDF?
The official STM8S105K6 product page is the appropriate starting point for the STM8S105K6T6CTR datasheet and related device documentation. The manufacturer page identifies the STM8S105x4/6 access line and its memory range of 16 KB to 32 KB of Flash plus integrated true data EEPROM. A separate searchable datasheet listing is also available from Datasheets.com. For design sign-off, use the manufacturer document corresponding to the exact STM8S105K6T6CTR order code and its stated revision.
Where can I find the STM8S105K6T6CTR pinout?
The STM8S105K6T6CTR pinout is defined by the 32-pin LQFP package drawing and pin-description table in the manufacturer datasheet. The verified product information confirms a 32-pin LQFP package but does not reproduce individual pin names. Use the package drawing to map VDD, VSS, reset, clock, programming, I/O, and peripheral signals onto the PCB. Confirm every pin against the exact STM8S105K6T6CTR datasheet rather than inferring assignments from another STM8 device.
What is the difference between STM8S105K6T6CTR and STM8S105K6T3C?
Both devices are STM8S105x6 access-line microcontrollers with the same 8-bit architecture, 16 MHz clock class, and 32 KB Flash configuration, but their final order codes represent different temperature grades. The exact grade limits must be confirmed from the manufacturer ordering information before substitution. STM8S105K6T3C is a same-family option, while STM8S105K6T6CTR is the T6-grade order code specified here. Review the temperature ratings, lifecycle status, and any PCN documentation before approving a change.
Can STM8S105K6T3C replace STM8S105K6T6CTR?
STM8S105K6T3C is a close same-family candidate, but it should not be treated as an unconditional drop-in replacement until its temperature range is checked against the installed product's operating environment. The manufacturer identifies the STM8S105x4/6 family and its 16 KB to 32 KB Flash options; both K6 variants use the 32 KB class. Confirm the exact LQFP pin arrangement, electrical limits, qualification requirements, and operating-temperature grade in the manufacturer datasheet before production use.
When should I choose STM8S105K6T6CTR over STM8S105K4T6C?
Choose STM8S105K6T6CTR when the application needs the 32 KB STM8S105x6 Flash configuration and can operate across the T6 temperature grade. STM8S105K4T6C belongs to the 16 KB STM8S105x4 class, so it offers less program memory. The selection should be based on code size, retained data requirements, operating temperature, and qualification conditions. Both are relevant to the same 8-bit STM8S control platform, but their memory capacities must be checked against firmware size and upgrade requirements.
Is STM8S105K6T6CTR suitable for a 3.3 V embedded-control board?
Yes, the STM8S105K6T6CTR is suitable for a 3.3 V embedded-control board because its stated operating range is 3.3 V to 5 V. It combines that supply range with a 16 MHz maximum clock, 32 KB of Flash, and integrated true data EEPROM. Board design must still account for individual peripheral and I/O limits, decoupling, reset, clock configuration, and maximum pin currents described in the manufacturer datasheet. Do not infer that every 5 V peripheral can be connected directly to a 3.3 V GPIO.
How much Flash memory does the STM8S105K6T6CTR have?
The STM8S105K6T6CTR has 32 KB of Flash program memory, organized as 32K x 8, according to its product listing. This distinguishes the K6 device from the STM8S105x4 class, which provides 16 KB of Flash. The larger memory option is useful for protocol handlers, state machines, drivers, diagnostics, and bootloader space. Before finalizing a firmware allocation, confirm the actual program-memory partition and reserved areas in the applicable STM8S105x6 reference documentation.
Does the STM8S105K6T6CTR include nonvolatile data memory?
Yes, the STM8S105K6T6CTR includes integrated true data EEPROM in addition to its 32 KB Flash program memory. The manufacturer describes the STM8S105x4/6 access line as providing true data EEPROM on-chip. This can support retained configuration values, calibration data, serial numbers, and operating counters without an external EEPROM. The exact EEPROM capacity and endurance limits should be taken from the manufacturer datasheet because they are not stated in the available product summary.
Where can I buy STM8S105K6T6CTR online?
Use the Request a Quote form on this page to request the STM8S105K6T6CTR, current lead time, available quantity, and orderable packaging. The manufacturer part number is STM8S105K6T6CTR, and the verified listings identify it as a 32-pin LQFP tray device. Submit the exact MPN without changing the temperature or package suffix unless your circuit requirements specifically call for another grade. The request process allows procurement to confirm the current commercial terms directly.
What is the price of STM8S105K6T6CTR?
The current unit price for STM8S105K6T6CTR should be obtained through the Request a Quote form on this page because commercial pricing changes with quantity, availability, and order conditions. The verified product information confirms the exact manufacturer part number, 32 KB Flash configuration, 16 MHz clock class, and 32-pin LQFP tray package. Provide your requested quantities and shipment destination with the inquiry so the quote can reflect the intended production schedule and packaging requirements.
What is the lead time for STM8S105K6T6CTR?
The current lead time for STM8S105K6T6CTR should be confirmed through the Request a Quote form on this page. Include the required quantity, target delivery date, and whether the order is for prototype evaluation or scheduled production. The exact MPN matters because the STM8S family contains different Flash-density, temperature-grade, and packing suffixes. A quote request for STM8S105K6T6CTR allows procurement to match the exact 32 KB, T6-grade, tray-packed order code.
Is STM8S105K6T6CTR in stock?
Current stock for STM8S105K6T6CTR is confirmed through the Request a Quote form on this page rather than through a static availability statement. Submit the exact MPN and quantity so procurement can respond with the current available quantity and lead time. The part is identified by STMicroelectronics as an 8-bit, 16 MHz STM8S microcontroller with 32 KB of Flash in a 32-pin LQFP tray package. For production planning, request the earliest delivery date and a shipment against your requested build schedule.
What is the best cross-brand equivalent for STM8S105K6T6CTR?
No cross-brand drop-in equivalent can be confirmed from the current cross-reference information. A defensible replacement must match the 32-pin LQFP footprint and pin functions while remaining within the target's 16 MHz clock, 32 KB Flash, 3.3 V to 5 V supply, embedded peripherals, and programming workflow. A 32-bit MCU or a different 8-bit architecture may offer equivalent broad functionality but can require board changes, different firmware, and different tooling. Request engineering review for any cross-manufacturer substitution.
How does STM8S105K6T6CTR compare with a larger 32-bit microcontroller?
The STM8S105K6T6CTR provides an 8-bit CISC architecture, 16 MHz maximum clock, and 32 KB Flash in a 32-pin LQFP, while larger 32-bit microcontrollers generally provide wider arithmetic capability, larger memory systems, and more high-bandwidth peripherals. The STM8 device can be simpler and more economical for straightforward control tasks, but firmware architecture, interrupt handling, and peripheral requirements determine the actual benefit. Choose the STM8S105K6T6CTR for embedded control that fits its access-line resource envelope rather than as a direct instruction-set replacement.

بيانات مرجعية هندسية لـ STM8S105K6T6CTR — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose STM8S105K6T6CTR for an 8-bit embedded-control design that benefits from 32 KB of Flash, a 16 MHz maximum clock, integrated true data EEPROM, and a 3.3 V to 5 V supply range. STM8S105K4T6C is the more constrained choice at 16 KB of Flash and should be selected only when its code map is sufficient. STM8S105K6T3C is a close same-family candidate, but its temperature grade must match the deployment environment. No cross-brand drop-in option is established by the current cross-reference information, so a different manufacturer’s MCU should be treated as a redesign unless its pinout, electrical limits, peripherals, memory architecture, and programming method are verified as fully compatible.

المقارنة مع البدائل

المعامل هذا المنتج
Brand STMicroelectronics
Package 32-pin LQFP
Microcontroller Class 8-bit STM8S access line
Maximum CPU Clock 16 MHz
Flash Program Memory 32 KB
Flash Organization 32K x 8
Supply Voltage 3.3 V to 5 V
Shipping Package Tray

أبرز الفروقات

  • 32 KB Flash configuration (مقابلSTM8S105K4T6C)
  • T6-grade order code (مقابلSTM8S105K6T3C)
  • Integrated true data EEPROM (مقابلSTM8S105K4T6C)

ملاحظات التصميم

Follow the manufacturer datasheet layout for the 32-pin LQFP, including the recommended power and decoupling connections. Place the supply bypass capacitor adjacent to the device's power pins and route it with a short, low-inductance path. Keep sensitive analog and communication traces away from high-current switching nodes. Because the individual pin assignments and bypass values are not stated in the available product summary, use the exact STM8S105K6T6CTR schematic and layout guidance rather than relying on a generic STM8 footprint template.

Design the board around the stated 3.3 V to 5 V operating range and check every connected peripheral for logic-level compatibility. Use a regulator with suitable transient response, adequate startup behavior, and headroom for the selected supply. Treat the microcontroller as a 3.3 V or 5 V device only within its documented GPIO and total current limits. If the board mixes voltage domains, use level translation or appropriately rated buffers instead of relying on internal pull-ups or protection diodes.

Do not assume that every STM8S105 order code is interchangeable: the family includes 16 KB and 32 KB Flash-density options, and the final suffix identifies temperature grade and packing information. This target is the 32 KB K6 variant in tray form. Before substitution, compare the exact order code, memory size, LQFP pinout, temperature limits, supply characteristics, peripheral set, and programming procedure. Firmware that exceeds 16 KB should never be moved to an STM8S105K4 variant without changing the memory map and validating every affected vector and function.

Reserve the programming interface, reset circuitry, and clock components in the initial PCB layout so firmware can be programmed and the device can be recovered after assembly. Follow the manufacturer's recommended clock network and avoid long traces between timing components and the MCU. For production builds, test points for supply, reset, and the programming interface simplify diagnosis without disrupting the LQFP land pattern. Verify the exposed-pad or thermal requirements associated with the exact package drawing before finalizing copper.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The available manufacturer and distributor product summaries do not state the required compliance statuses. Automotive qualification, lead-free construction, and halogen-free status must be confirmed from the exact manufacturer order-code documentation.

عمليات بحث ذات صلة

stm8s105k6t6ctr datasheet STM8S105K6T6CTR specifications STM8S105K6T6CTR pinout STM8S105K6T6CTR LQFP-32 STM8S105K6T6CTR application circuit STM8S105K6T6CTR replacement STM8S105K6T6CTR equivalent STM8S105K6T6CTR cross reference STM8S105K6T6CTR price STM8S105K6T6CTR stock STMicroelectronics STM8S105K6T6CTR STM8S105K6T6CTR vs STM8S105K4T6C

المكونات والمصطلحات ذات الصلة

STMicroelectronics STM8S105K6T6CTR STM8S105K6T3C STM8S105K4T6C STM8S105C4T6TR STM8S105 STM8S105x4/6 access line 8-bit microcontroller CISC instruction set ST7 core embedded microcontroller microcontroller semiconductor 16 MHz clock 32 KB Flash memory 32K x 8 Flash organization true data EEPROM 3.3 V power supply 5 V power supply 32-pin LQFP LQFP package family surface-mount package industrial control sensor interface appliance control
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر