STM8S105K6T6CTR - 16MHz 8-Bit MCU, 32KB Flash | STMicroelectronics (Tape & Reel)
MPN: STM8S105K6T6CTR ✓ AktifSTM8S105K6T6CTR Ringkasan
An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, Flash memory, data memory, I/O ports, and embedded peripherals on one device. The STM8S105 access line belongs to the STM8 family of 8-bit microcontrollers and is positioned between the simpler STM8S105x4 devices with 16 KB of Flash and the STM8S105x6 devices with 32 KB of Flash. This hierarchy provides more application memory without moving to a larger 32-bit MCU architecture.
The STM8S105K6T6CTR combines a 16 MHz maximum clock with 32 KB of Flash program memory in 32 KB × 8 organization. Its integrated true data EEPROM supports nonvolatile data retention directly on the MCU, which is useful for calibration values, configuration records, counters, and serialized product data. The 3.3 V and 5 V operating range also supports both legacy 5 V systems and modern 3.3 V peripherals when the board-level limits are respected.
The STM8S105K6 architecture is based on the ST7 core described for the STM8S family and uses an 8-bit CISC instruction set. Compared with a small resource-constrained MCU, the 32 KB Flash option provides more room for application code, drivers, protocol handlers, and field-upgrade logic. Compared with a 32-bit MCU, it remains focused on lower-cost control tasks where an 8-bit CPU and simple embedded toolchain are sufficient.
Typical uses include appliance controllers, small sensor-hub nodes, keypad interfaces, LED-control boards, compact motor-control peripherals, and industrial automation modules. The 32-pin LQFP package exposes more I/O than smaller leadless packages and remains practical for prototype boards, automated assembly, and repair workflows where a leaded package improves visual inspection.
Designers should preserve the MCU power and decoupling layout shown in the manufacturer datasheet, verify the selected oscillator and reset implementation, and confirm every peripheral pin against the exact package drawing. Use the USB-to-UART programming interface and firmware configuration appropriate to the selected ST8 development toolchain, and allow for the operating-temperature grade denoted by the final order code.
This product page organizes the core device identity, verified specifications, sourcing information, engineering guidance, and same-family references in one place. It also highlights the practical differences among temperature-grade and Flash-density order codes so engineers can make a replacement decision without assuming that every STM8S105 variant is electrically interchangeable.
Pilihan pengganti yang segera untuk STM8S105K6T6CTR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
STM8S105K6T3C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM8S105C6T6C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM8S105C6T3C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM8S105K6T6CTR Penilaian maksimum & Ciri-ciri Elektrik
| Microcontroller Type | 8-bit RISC/CISC access-line microcontroller |
| Product Series | STM8S105 |
| Maximum CPU Clock | 16 MHz |
| Flash Program Memory | 32 KB |
| Flash Organization | 32K x 8 |
| Tegangan Pemberi Arus | 3.3 V to 5 V |
| Architecture | 8-bit CISC with ST7 core |
| Kemasan | 32-pin LQFP |
| Package Type | Tray |
| Jenis Pemasangan | Surface mount |
| Kiraan Pin | 32 pins |
Panduan Konfigurasi Pin STM8S105K6T6CTR tray
Konfigurasi pin untuk STM8S105K6T6CTR (tray pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM8S105K6T6CTR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM8S105K6T6CTR patut untuk 6 aplikasis: Appliance Control Board, Sensor Hub and Condition Monitoring, LED Display and Indicator Control, Compact Industrial Automation Module, Keyboard and User Interface Controller, Battery-Powered Instrumentation.
Appliance Control Board
The STM8S105K6T6CTR fits appliance control boards that coordinate buttons, indicators, relays, sensors, and small motors through a deterministic embedded-control firmware. Its 16 MHz clock provides useful headroom for an 8-bit control loop, while 32 KB of Flash allows application logic, peripheral drivers, diagnostics, and communication handlers to coexist. Integrated true data EEPROM can retain settings or counters without adding an external memory device. The 3.3 V to 5 V range supports mixed legacy and modern board rails, subject to individual GPIO limits. Use the manufacturer pin table to assign the LQFP signals and keep the power, reset, clock, and programming routes within the documented layout.
Disebarkan
Sensor Hub and Condition Monitoring
The STM8S105K6T6CTR can serve as the local controller in a compact sensor hub that gathers temperature, light, motion, or analog measurements and presents them through a serial interface. Its 32 KB Flash provides enough room for acquisition routines, calibration tables, filtering, diagnostics, and communication protocols, while integrated true data EEPROM is useful for sensor offsets or calibration identifiers. The 16 MHz maximum clock supports responsive sampling and control without the resource demands of a general-purpose processor. Keep analog and digital grounds arranged according to the manufacturer reference guidance, and verify each sensor interface voltage before connecting it to the 3.3 V to 5 V device.
Disebarkan
LED Display and Indicator Control
The STM8S105K6T6CTR is appropriate for LED matrix, status-indicator, and signage-control modules where the controller must sequence multiple outputs and respond to buttons or external commands. Its 8-bit architecture is well matched to byte-oriented display data, and the 16 MHz clock supports regular refresh timing and debounce handling. With 32 KB of Flash, firmware can include display patterns, animation tables, communication parsing, and diagnostic functions. Integrated true data EEPROM can preserve brightness, user configuration, or calibration information. Select the GPIO and timer assignments from the exact 32-pin LQFP datasheet, and account for LED driver voltage, current, and grounding rather than driving loads directly from MCU pins.
Disebarkan
Compact Industrial Automation Module
The STM8S105K6T6CTR can support compact industrial automation modules that perform local sequencing, monitor discrete inputs, operate outputs, and expose diagnostics through a communication interface. Its 32 KB Flash accommodates a state machine, input filtering, event logging, and protocol handling, while the 16 MHz clock supports timely deterministic control. The 3.3 V to 5 V operating range allows integration with varied control boards, but industrial qualification requirements must be checked separately. Use galvanic isolation, surge protection, proper connector design, and robust grounding at the interface boundary. Firmware should include watchdog, brownout, and fault-state behavior appropriate to the equipment's safety requirements.
Disebarkan
Keyboard and User Interface Controller
The STM8S105K6T6CTR is well suited to a dedicated keyboard, panel, or human-interface controller that scans switches, drives indicators, and manages serial commands. At up to 16 MHz, its 8-bit CPU can handle debounce, matrix scanning, and display updates concurrently. The 32 KB Flash budget allows room for multiple layouts, communication protocols, bootloader functions, and diagnostic counters, while true data EEPROM can store user-selected settings. The 32-pin LQFP provides a practical number of external connections for a control-oriented board. Validate active levels, pull components, and debounce strategy against the exact GPIO configuration, and apply ESD protection to connector-accessible inputs.
Disebarkan
Battery-Powered Instrumentation
The STM8S105K6T6CTR can serve as the control core in battery-powered instrumentation or a portable measurement module when the design favors a simple 8-bit architecture and nonvolatile configuration storage. The 3.3 V operating capability is useful for systems using a regulated 3.3 V rail, and the integrated true data EEPROM can retain calibration or setup values between power cycles. The 16 MHz clock allows responsive control without requiring a high-performance processor. Low-power behavior still depends on the selected STM8S105 variant's clock-stop and peripheral configuration, so verify those modes in the manufacturer datasheet. Use the lowest suitable supply voltage, disable unused peripherals, and include a low-voltage threshold in the firmware.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM8S105K6T6CTR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Brand | STMicroelectronics |
| Package | 32-pin LQFP |
| Microcontroller Class | 8-bit STM8S access line |
| Maximum CPU Clock | 16 MHz |
| Flash Program Memory | 32 KB |
| Flash Organization | 32K x 8 |
| Supply Voltage | 3.3 V to 5 V |
| Shipping Package | Tray |
Penyeberangsung Jelas
- 32 KB Flash configuration (vsSTM8S105K4T6C)
- T6-grade order code (vsSTM8S105K6T3C)
- Integrated true data EEPROM (vsSTM8S105K4T6C)
Catatan Desain
Follow the manufacturer datasheet layout for the 32-pin LQFP, including the recommended power and decoupling connections. Place the supply bypass capacitor adjacent to the device's power pins and route it with a short, low-inductance path. Keep sensitive analog and communication traces away from high-current switching nodes. Because the individual pin assignments and bypass values are not stated in the available product summary, use the exact STM8S105K6T6CTR schematic and layout guidance rather than relying on a generic STM8 footprint template.
Design the board around the stated 3.3 V to 5 V operating range and check every connected peripheral for logic-level compatibility. Use a regulator with suitable transient response, adequate startup behavior, and headroom for the selected supply. Treat the microcontroller as a 3.3 V or 5 V device only within its documented GPIO and total current limits. If the board mixes voltage domains, use level translation or appropriately rated buffers instead of relying on internal pull-ups or protection diodes.
Do not assume that every STM8S105 order code is interchangeable: the family includes 16 KB and 32 KB Flash-density options, and the final suffix identifies temperature grade and packing information. This target is the 32 KB K6 variant in tray form. Before substitution, compare the exact order code, memory size, LQFP pinout, temperature limits, supply characteristics, peripheral set, and programming procedure. Firmware that exceeds 16 KB should never be moved to an STM8S105K4 variant without changing the memory map and validating every affected vector and function.
Reserve the programming interface, reset circuitry, and clock components in the initial PCB layout so firmware can be programmed and the device can be recovered after assembly. Follow the manufacturer's recommended clock network and avoid long traces between timing components and the MCU. For production builds, test points for supply, reset, and the programming interface simplify diagnosis without disrupting the LQFP land pattern. Verify the exposed-pad or thermal requirements associated with the exact package drawing before finalizing copper.
Maklumat Kesediaan
The available manufacturer and distributor product summaries do not state the required compliance statuses. Automotive qualification, lead-free construction, and halogen-free status must be confirmed from the exact manufacturer order-code documentation.