onsemi

TCA0372DWR2 - Dual Power Op-Amp 1A SOIC-16 | onsemi

MPN: TCA0372DWR2 ✓ نشط
5 V to 40 V Vdss 1.0 A Id SOIC-16 Wide (DW) Package
الحد الأدنى للطلب: 1 |

TCA0372DWR2 نظرة عامة

The onsemi TCA0372DWR2 is a dual power operational amplifier delivering up to 1.0 A output current per channel, operating from supply rails of 5 V to 40 V (or ±20 V dual supply), housed in a 16-pin wide SOIC (SOIC-16 W, DW suffix) surface-mount package.

A power operational amplifier is an op-amp that combines the precision input stage and high open-loop gain of a standard operational amplifier with an output stage capable of sourcing or sinking currents in the ampere range, far beyond the tens of milliamps typical of general-purpose op-amps. In the power-management and signal-chain hierarchy, the TCA0372 sits between standard op-amps and fully integrated audio or motor driver ICs: it is an amplifier - specifically a power op-amp - classified under operational amplifiers / buffer amplifiers in vendor taxonomies.

Key differentiating features of the TCA0372 include the 1.0 A continuous output current rating, a gain-bandwidth product around 1.4 MHz with a 1.4 V/us slew rate, and operation on a single supply from 5 V to 40 V or on dual supplies up to ±20 V. The device is internally compensated and, critically, exhibits no deadband crossover distortion in the output stage, which is essential when driving inductive loads such as coils, actuators, and servo motors where crossover artifacts translate directly into torque ripple or audible distortion.

Architecturally, the TCA0372 is a monolithic bipolar device integrating two complete power op-amp channels on a single die. The wide-body SOIC-16 package provides substantially better thermal dissipation than a standard SOIC-8, allowing both channels to drive heavy loads when adequate PCB copper is provided. Internal thermal limiting and safe-area considerations typical of power output stages protect the device during faults, though board-level thermal design remains the designer's responsibility at sustained high current.

Typical applications include servo amplifiers for position control, power supplies as error amplifiers or pass-element drivers, coil and solenoid drivers, motor control subcircuits, audio power output stages, and general power buffering where a standard op-amp cannot supply the required load current.

When designing with the TCA0372, account for package power dissipation: at 1 A output across a large input-to-output voltage differential, junction temperature rise is dominated by the SOIC-16 thermal resistance, so generous copper pours on the output-stage pins are recommended.

This page adds value beyond the manufacturer datasheet by consolidating drop-in replacement options (TCA0372DWR2G, TCA0372BDWR2G, NCV0372B variants), application guidance, and comparison data in one place for sourcing and design engineers.

بدائل مباشرة لـ TCA0372DWR2 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع TCA0372DWR2 (نفس عامل الشكل والبصمة) — يختلف في Crossover Distortion, Package, Slew Rate.

onsemi
Crossover Distortion: No deadband crossover distortion
Package: 16-pin SOIC
Slew Rate: 1.3 V/µs
قارن مع TCA0372DWR2 →

TCA0372DWR2G

✅ بديل مباشر
📦 SOIC-16 Wide (DW)
Pb-free/RoHS finish and extended temperature option, otherwise same die, same package, pin-to-pin identical

📋 بديل مرجعي (غير موجود في الكتالوج)

TCA0372BDWR2G

✅ بديل مباشر
📦 SOIC-16 Wide (DW)
B-grade: 1.4 MHz bandwidth and 1.4 V/us slew rate explicitly specified, 1 A output and 5-40 V range identical, Pb-free, same 16-pin WSOIC footprint

📋 بديل مرجعي (غير موجود في الكتالوج)

TCA0372DWG

✅ بديل مباشر
onsemi
📦 SOIC-16 Wide (DW)
Dual power operational amplifier · 2 channels · 1.0 A · 5 V to 40 V · 1.4 MHz · 1.3 V/µs · ±15 V · 16-pin SOIC

تواصل لمعرفة السعر

عرض ورقة البيانات ←

NCV0372BDWR2G

✅ بديل مباشر
📦 SOIC-16 Wide (DW)
automotive-qualified NCV variant of the B grade, covered by the same onsemi datasheet family (TCA0372/TCA0372B/NCV0372B), same package and pinout

📋 بديل مرجعي (غير موجود في الكتالوج)

TCA0372DWR2

✅ بديل مباشر
onsemi
📦 SOIC-16 Wide (DW)
Dual Power Operational Amplifier · 2 · 1.0 A · 5 V to 40 V · ±20 V (40 V total) · 1.4 MHz · 1.4 V/us · No deadband

تواصل لمعرفة السعر

عرض ورقة البيانات ←

TCA0372DWR2 الحدود القصوى والخصائص الكهربائية

Amplifier Type Dual Power Operational Amplifier
Number of Circuits 2
Output Current per Channel 1.0 A
Supply Voltage Range (Single) 5 V to 40 V
Supply Voltage Range (Dual) ±20 V (40 V total)
Gain Bandwidth Product 1.4 MHz
Slew Rate 1.4 V/us
Crossover Distortion No deadband
العلبة SOIC-16 Wide (DW)
نوع التركيب Surface Mount
Packaging Tape and Reel (R2 suffix)
عدد الأطراف 16
Extended Temperature Variant TCA0372DWR2G (extended temp, Pb-free)
Manufacturer Lifecycle Active (per onsemi product page)
Typical Applications Servo amplifiers, power supplies, coil drivers

دليل تكوين أطراف TCA0372DWR2 soic-16 wide (dw)

تكوين الأطراف لـ TCA0372DWR2 (حزمة soic-16 wide (dw)). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة soic-16 wide (dw) لـ TCA0372DWR2

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TCA0372DWR2.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TCA0372DWR2 مناسب لـ 6 التطبيقs: Servo Amplifiers, Power Supply Error Amplifier / Pass Driver, Coil and Solenoid Drivers, Audio Power Output Stage, Motor Control Subcircuits, Instrumentation Power Buffering.

🏭

Servo Amplifiers

The TCA0372DWR2 is explicitly named by onsemi as intended for servo amplifiers, and the part's specifications align precisely with that role. Servo loops drive motor and actuator coils where the amplifier output stage must deliver ampere-level current while remaining linear through zero crossing: any deadband in the output stage appears as torque ripple and positioning error. The TCA0372's no-deadband crossover distortion output stage addresses this directly, and its 1.0 A per-channel output current drives small servo windings without an external driver stage. Operation on single 5-40 V or dual ±20 V supplies fits both industrial split-rail drives and single-supply actuators. Designers should size PCB copper on the output pins for the sustained coil current and verify loop stability with the reactive load using the datasheet compensation guidance.

⚡

Power Supply Error Amplifier / Pass Driver

onsemi lists power supplies among the TCA0372's target applications. In a linear or servo-controlled switching supply, the error amplifier must both process small feedback signals and, in low-dropout or linear designs, drive the base or gate of a series pass element with meaningful current. The TCA0372DWR2 combines a standard op-amp input stage with a 1.0 A output, so a single device can close the loop and directly drive the pass transistor at moderate loads. Its 5-40 V single-supply range covers common 12 V, 24 V, and 28 V industrial rails, while ±20 V dual-supply operation suits bench and laboratory supplies. Designers should confirm phase margin with the pass element's input capacitance and keep the amplifier's dissipation within the SOIC-16 wide package thermal limits.

🔧

Coil and Solenoid Drivers

Driving coils, solenoids, and electromagnets is a core TCA0372 use case, enabled by three parameters: 1.0 A continuous output current per channel, the no-deadband crossover output stage, and internally compensated stability with inductive loads. When a solenoid energizes and releases, the inductive kick must be handled - the datasheet typical applications show the output stage paired with appropriate flyback protection, and the dual channels allow H-bridge-style bidirectional coil drive on ±20 V supplies for latching actuators. Compared with discrete transistor driver chains, the monolithic approach removes crossover artifacts from the current waveform, which matters in proportional solenoids used in fluid control where ripple translates into pressure modulation. Verify thermal dissipation at the coil holding current.

🎧

Audio Power Output Stage

The TCA0372DWR2 functions as a compact dual-channel audio power amplifier for small speakers and headphone-driver applications. Its no-deadband crossover distortion specification is the decisive audio parameter: Class-B-style output stages produce audible crossover distortion at low signal levels, while the TCA0372's output stage remains linear through the zero-current crossing, preserving low-level detail. With 1.0 A per channel on ±15 V rails, the device drives typical 8-ohm small-speaker loads at useful output levels, and the dual channels support stereo operation from one SOIC-16 package. Bandwidth of the 1.4 MHz family is ample for audio closed-loop gains of 20-40 dB. Place the device close to bulk supply decoupling and provide generous copper on the output pins for sustained program material.

⚙️

Motor Control Subcircuits

Within larger motor-control systems, the TCA0372DWR2 fills the analog layer between the digital controller and the power stage. It can drive small DC motor windings directly, act as the error amplifier inside velocity or position loops, or buffer DAC-generated torque commands up to ampere levels - a role general-purpose op-amps cannot perform because of their milliamp-class outputs. The 1.4 MHz-class bandwidth family supports typical closed-loop control bandwidths, and single 5-40 V operation allows the amplifier to share the motor rail. For bidirectional drive, the two channels configure as a linear H-bridge on ±20 V supplies. Designers should validate stability with the motor's inductance and back-EMF characteristics and budget package dissipation at stall current, which is the worst-case thermal point.

🖥️

Instrumentation Power Buffering

Test, measurement, and industrial instrumentation frequently need an op-amp output that supplies real load current: reference buffers feeding calibration loads, transducer excitation drives, and programmable source outputs. The TCA0372DWR2 provides the answer by pairing a conventional precision-style input stage with a 1.0 A output stage in one package, allowing a standard feedback network to be wrapped around an ampere-class driver. The wide SOIC-16 package thermally supports sustained buffering better than small-outline alternatives, and ±20 V dual-supply operation spans common instrument analog rails. In data-acquisition front ends, pairing the buffer with a precision ADC channel lets the system verify its own output. Keep feedback resistances moderate and confirm capacitive-load stability for cable-driven outputs.

What is the output current of TCA0372DWR2?
The TCA0372DWR2 delivers up to 1.0 A of continuous output current per channel, with two amplifier channels in one package. According to the onsemi TCA0372 datasheet, this 1 A rating is what distinguishes the TCA0372 from general-purpose op-amps, which typically source or sink only tens of milliamps. The wide SOIC-16 (DW) package provides the thermal capability needed to sustain such currents when adequate PCB copper is used for heat spreading.
What is the supply voltage range of TCA0372DWR2?
The TCA0372DWR2 operates from a single supply of 5 V to 40 V or from dual supplies up to ±20 V (40 V total across the device). Per the onsemi datasheet, this wide operating range lets the same part serve low-voltage 5 V logic-adjacent designs and higher-voltage industrial rails, including split-supply servo amplifier configurations. Verify that total supply voltage never exceeds 40 V and observe the absolute maximum ratings during transients.
What is the difference between TCA0372DWR2 and TCA0372DWR2G?
The TCA0372DWR2G is the Pb-free (RoHS-oriented) variant of the TCA0372DWR2 in the same SOIC-16 wide package, and the G version is also offered with extended temperature capability per Mouser and DigiKey listings. Electrically the two parts share the same die family: dual power op-amps, 1 A output, 5-40 V operation. For new Pb-free designs, onsemi's G-suffix part is the recommended choice; the non-G suffix primarily serves legacy builds and repair work.
What is the best drop-in replacement for TCA0372DWR2?
The closest drop-in replacements are onsemi's own family members: TCA0372DWR2G (Pb-free, same SOIC-16 wide footprint) and TCA0372BDWR2G (the B-grade version with 1.4 MHz bandwidth, 1.4 V/us slew rate, same 16-pin WSOIC package, listed by FindIC as a replacement part). Both are pin-to-pin compatible, so no PCB redesign is required. No cross-brand pin-compatible equivalent in the same SOIC-16 wide package appears in distributor cross-reference listings for this part.
Can TCA0372BDWR2G replace TCA0372DWR2?
Yes. According to the onsemi TCA0372 datasheet, which covers TCA0372, TCA0372B, and NCV0372B in one document, the B version shares the same 16-pin wide SOIC package and pinout as the standard TCA0372. The B version is specified at 1.4 MHz bandwidth and 1.4 V/us slew rate with the same 1.0 A output current and 5-40 V supply range, so it is functionally interchangeable on an existing PCB. Confirm B-version offset and bandwidth figures against your circuit requirements.
Is TCA0372DWR2 suitable for servo amplifier applications?
Yes. The onsemi product page explicitly names servo amplifiers and power supplies as intended applications for the TCA0372. The no-deadband crossover distortion output stage is the key specification for servo use: when driving coils and motors, crossover artifacts become torque ripple and positioning error. Combined with 1 A output current per channel and single or dual supply operation from 5 V to 40 V, the device can directly drive small servo windings without an external driver stage.
Does the TCA0372DWR2 require a heatsink at full 1A output?
Not a bolt-on heatsink, but thermal PCB design is critical. The TCA0372DWR2 comes in a wide SOIC-16 (DW) package that dissipates heat through its leads and footprint, so at 1 A output across a large supply-to-output voltage differential, power dissipation can reach several watts per channel. Estimated: at 40 V supply, 20 V output, 1 A load, dissipation is about 20 W - well beyond SOIC capability. Keep VIN-VOUT deltas modest, use large copper pours on the output pins, and check junction temperature against the datasheet derating curves.
Where can I download the TCA0372DWR2 datasheet PDF?
The official datasheet PDF is available from onsemi at onsemi.com (document covering TCA0372, TCA0372B, and NCV0372B dual power operational amplifiers). The download link on this page points directly to the manufacturer's PDF. It contains the electrical characteristics tables, maximum ratings, thermal information, and the 16-pin SOIC-wide package pin assignment. Distributor mirror copies exist on aggregator sites, but the onsemi original is the authoritative revision.
Where can I find the TCA0372DWR2 pinout?
The TCA0372DWR2 pinout is given in the onsemi TCA0372 datasheet for the 16-pin wide SOIC (DW) package: the two channels' outputs, inverting and non-inverting inputs, and supply pins are arranged along the two 8-pin rows, with several pins used for supply and thermal purposes on this power device. Download the datasheet PDF from onsemi and use the pin-connection diagram on the package section page when assigning PCB tracks, since power op-amps may parallel multiple pins for current capacity.
What are the key specifications of TCA0372DWR2 that engineers should know?
The TCA0372DWR2 is a dual power operational amplifier from onsemi in a 16-pin wide SOIC package. Headline specs: 1.0 A output current per channel, supply operation from 5 V to 40 V single or ±20 V dual, no deadband crossover distortion, and intended use in servo amplifiers and power supplies. Sibling B-grade parts add 1.4 MHz bandwidth and 1.4 V/us slew rate. These numbers define the part's niche: a standard op-amp input stage fused with an ampere-class output stage for driving coils and actuators directly.
Is TCA0372DWR2 RoHS compliant?
The RoHS-compliant member of this family is the TCA0372DWR2G, whose G suffix denotes onsemi's Pb-free finish; the extended-temperature G version is stocked at major distributors for this reason. The non-G TCA0372DWR2 should be treated as the legacy finish option. For any new build subject to RoHS or REACH obligations, specify the G-suffix ordering code and verify the material-declaration documents on the onsemi product page before release to production.
Where to buy TCA0372DWR2 online?
TCA0372DWR2 and its G-suffix variants are stocked items at franchised distributors including DigiKey and Mouser, and LCSC lists the Pb-free TCA0372DWR2G from stock. To purchase TCA0372DWR2 through this site, use the Request a Quote form on this page: submit your required quantity and target date, and XAIPART will respond with current price, stock position, and lead time. Quote-based sourcing is recommended for this part because distributor stock of the non-G suffix moves frequently.
What is the lead time and packaging of TCA0372DWR2?
The TCA0372DWR2 ships in tape-and-reel packing (the R2 suffix denotes the reel packing code for the SOIC-16 wide package), which suits automated assembly runs. Exact reel quantity and current lead time vary with distributor stock position; franchised distributor listings show the part available for same-day shipment when in stock. Request the current lead time and reel quantity through the Request a Quote form on this page before committing to a production schedule.
What is the difference between TCA0372DWR2 and a general-purpose op-amp like LM358?
The fundamental difference is output current: the TCA0372DWR2 sources or sinks up to 1.0 A per channel, while general-purpose dual op-amps such as the LM358 supply roughly 20-50 mA. The TCA0372 therefore drives coils, solenoids, and small motors directly, whereas an LM358 needs an external buffer or transistor stage. The TCA0372 uses the much larger SOIC-16 wide package for thermal reasons and costs more; for signal-level tasks that need no load current, the general-purpose part remains the economical choice.
Can I use the TCA0372DWR2 as an audio power amplifier?
Yes, within limits. The no-deadband crossover distortion output stage makes the TCA0372DWR2 well suited to low-to-medium power audio output stages, delivering cleaner small-signal crossover behavior than Class-B driver alternatives. With 1 A per channel into a suitable load on ±15 V rails, it can drive small speakers directly. Note the 1.4 MHz bandwidth family specification limits closed-loop gain-bandwidth, so design gain stages conservatively, and provide generous PCB copper on the output pins for heat dissipation during sustained audio drive.

بيانات مرجعية هندسية لـ TCA0372DWR2 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the TCA0372DWR2 when a design needs a true power op-amp: coil, solenoid, or small motor drive, servo error amplification, or instrument output buffering at up to 1 A per channel on 5-40 V (or ±20 V) rails. Select the TCA0372DWR2G for any new RoHS-driven build - electrically identical, Pb-free, and offered with extended temperature capability. Choose TCA0372BDWR2G when you need explicitly guaranteed 1.4 MHz bandwidth and 1.4 V/us slew rate in the same footprint, and NCV0372BDWR2G for automotive platforms requiring the NCV qualification line. If the load current is only tens of milliamps, a general-purpose dual op-amp is cheaper and smaller - the TCA0372's large package and higher cost are only justified by ampere-level output. There is no verified cross-brand pin-compatible drop-in for this part, so second sources should stay within the onsemi TCA0372 family.

المقارنة مع البدائل

المعامل هذا المنتج TCA0372DWR2G TCA0372BDWR2G TCA0372DWG NCV0372BDWR2G
Package SOIC-16 Wide (DW) SOIC-16 Wide (DW) - same SOIC-16 Wide (WSOIC-16) - same SOIC-16 Wide (DW) - same SOIC-16 Wide (DW) - same
Brand onsemi onsemi onsemi onsemi onsemi
Output Current per Channel 1.0 A 1.0 A 1.0 A 1.0 A 1.0 A
Supply Voltage Range 5 V to 40 V 5 V to 40 V 5 V to 40 V 5 V to 40 V 5 V to 40 V
Crossover Distortion No deadband No deadband No deadband No deadband No deadband
Automotive Qualification No No No No Yes (NCV = automotive)

أبرز الفروقات

  • Ampere-class output in an op-amp footprint (مقابلLM2904PWR)
  • No-deadband crossover distortion output stage (مقابلTCA0372BDWR2G (B-grade Class-B style alternatives))
  • Pb-free and automotive variants on the identical footprint (مقابلNCV0372BDWR2G / TCA0372DWR2G)

ملاحظات التصميم

The TCA0372DWR2 dissipates power as (VSUPPLY - VOUT) x ILOAD in the output transistors. Estimated: at a 40 V rail driving a grounded 10-ohm load at 1 A, dissipation approaches 30 W - far beyond the SOIC-16 wide package's capability. Keep the input-to-output voltage differential modest at high load currents, use wide copper pours connected to the output and supply pins, and check the datasheet thermal derating curves against your worst-case continuous load, not just typical operation. For bipolar drive on dual supplies, both halves of the waveform must be budgeted.

On the SOIC-16 wide footprint, dedicate generous PCB copper to the supply and output pins since the package has no exposed thermal pad - all heat exits through the leads. Place bulk decoupling (tens of microfarads, per the datasheet typical application circuits) within centimeters of the supply pins and add 0.1 uF ceramics directly at the pins for high-frequency bypass. Route the feedback network away from the high-current output trace to prevent parasitic coupling from destabilizing the loop, and keep the inverting-node track as short as possible.

Driving reactive loads (coils, solenoids, motors) is the intended use, but inductive kickback must be contained: provide flyback or clamp paths per the onsemi datasheet application circuits so load transients do not drive the output beyond the supply rails. Never exceed 40 V total supply under transient conditions. When replacing TCA0372DWR2 with the B-grade or NCV variants, verify the offset and bandwidth figures of the replacement grade against the circuit's accuracy and loop-bandwidth requirements rather than assuming complete parameter equivalence.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The G-suffix variants (TCA0372DWR2G, TCA0372BDWR2G, TCA0372DWG) are onsemi's Pb-free finish parts; the non-G TCA0372DWR2 finish status should be confirmed on the onsemi product page material declaration before use in regulated markets.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

TCA0372DWR2 datasheet TCA0372DWR2 pinout TCA0372DWR2 equivalent TCA0372DWR2 replacement TCA0372DWR2 vs TCA0372DWR2G TCA0372 datasheet pdf TCA0372DWR2 price TCA0372DWR2 stock onsemi TCA0372DWR2 TCA0372BDWR2G op amp dual power op amp 1A SOIC-16 TCA0372 servo amplifier application circuit TCA0372 footprint SOIC-16 wide 1A output current operational amplifier

المكونات والمصطلحات ذات الصلة

onsemi TCA0372DWR2 TCA0372DWR2G TCA0372BDWR2G NCV0372BDWR2G power operational amplifier operational amplifier buffer amplifier amplifier IC SOIC-16 Wide (DW) WSOIC surface mount RoHS Pb-free servo amplifier coil driver solenoid driver audio power output stage power supply error amplifier crossover distortion gain bandwidth product slew rate tape and reel
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر