Texas Instruments

THS1031CDW - 10-Bit 30-MSPS Pipelined ADC | Texas Instruments

MPN: THS1031CDW ✓ نشط
2.7 V to 3.3 V Vdss 28-pin SOIC Package
الحد الأدنى للطلب: 1 |

THS1031CDW نظرة عامة

The Texas Instruments THS1031CDW is a 10-bit, single-channel, 30-MSPS pipelined analog-to-digital converter operating from a 2.7 V to 3.3 V CMOS supply in a 28-pin SOIC package. It combines a parallel digital output with programmable digital clamp and gain features, an out-of-range indicator, and a power-down function for compact signal-acquisition systems.

An ADC is a data-acquisition IC that samples an analog voltage and converts it into a digital number. A pipelined ADC uses multiple internal stages to process successive samples in parallel, supporting higher conversion rates than a basic successive-approximation converter. Within the semiconductor hierarchy, the THS1031CDW is an ADC, a data-conversion IC, and a member of the broader integrated-circuit and analog signal-processing families.

Key features include 10-bit resolution, one analog input channel, a maximum conversion rate of 30 MSPS, and a 2.7 V to 3.3 V supply range. The 10-bit interface provides 1,024 digital codes across the selected input range. Programmable digital clamp and gain functions allow a system to constrain output behavior and apply digital scaling, while the out-of-range indication supports detection of input conditions beyond the programmed conversion range.

The THS1031CDW uses a pipelined architecture with a parallel output interface. CMOS implementation supports low-power operation, and the integrated power-down function can reduce consumption when acquisition is inactive. Its 28-pin SOIC package uses a rectangular gull-wing terminal arrangement and is available in a tube format according to the product listing. The commercial temperature grade makes the device suitable for standard commercial equipment when its specified operating limits are respected.

Typical applications include high-speed data acquisition, industrial measurement systems, communications receivers, control-system monitoring, medical instrumentation, and embedded signal processing. Its 30-MSPS sampling rate is particularly relevant to waveforms that require substantially faster sampling than a general-purpose low-speed measurement ADC. A parallel data bus also makes it practical for FPGA, CPLD, or digital-signal-processor capture systems with suitable input timing.

When laying out a circuit, treat the analog input as a high-speed signal path and keep routing short, controlled, and away from digital clocks and switching nodes. Follow the manufacturer datasheet for input-voltage limits, reference requirements, supply bypassing, clock timing, digital-output levels, and the correct power-down sequence. Decoupling capacitance and layout should be selected from the recommended application circuit rather than estimated from generic guidance.

This product guide organizes the verified electrical characteristics, package information, application considerations, and sourcing options for engineers evaluating the THS1031CDW. It also distinguishes documented converter capabilities from design assumptions and identifies where the exact pin mapping, lifecycle details, and qualified drop-in alternatives must be confirmed before a footprint or replacement decision is finalized.

بدائل مباشرة لـ THS1031CDW — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

THS1031CDW الحدود القصوى والخصائص الكهربائية

Converter Type Pipelined ADC
الدقة 10 bit
Input Channels 1 channel
Maximum Sampling Rate 30 MSPS
Supply Voltage Range 2.7 V to 3.3 V
Process Technology CMOS
Power Consumption Low power
Digital Interface Parallel
Digital Clamp Programmable
Digital Gain Programmable
Out-of-Range Indication Yes
Power-Down Function Yes
Temperature Grade Commercial
العلبة 28-pin SOIC
Package Code DW
Terminal Form Gull wing
Package Shape Rectangular
عدد الأطراف 28 pins
حالة RoHS RoHS3 compliant

دليل تكوين أطراف THS1031CDW rectangular

تكوين الأطراف لـ THS1031CDW (حزمة rectangular). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة rectangular لـ THS1031CDW

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ THS1031CDW.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

THS1031CDW مناسب لـ 6 التطبيقs: High-Speed Data Acquisition, Communications Receiver, Industrial Condition Monitoring, Medical Signal Monitoring, Control-System Feedback, Embedded Waveform Processing.

🖥️

High-Speed Data Acquisition

The THS1031CDW fits acquisition systems requiring rapid conversion of a single analog channel at up to 30 MSPS. Its 10-bit parallel output provides a straightforward interface to an FPGA, CPLD, or digital signal processor when the converter’s clock and output timing match the receiving logic. The 2.7 V to 3.3 V supply range also supports compact 3.3 V instrumentation, although the source impedance, anti-alias filtering, and input voltage must be engineered around the manufacturer’s operating limits. Use short routing and controlled-impedance clock distribution to preserve the integrity of this high-speed analog-to-digital path.

🌐

Communications Receiver

The THS1031CDW’s 30-MSPS conversion capability is appropriate for receiver front ends that digitize an intermediate analog waveform before channel filtering, demodulation, or spectrum analysis. A 10-bit parallel interface permits each conversion result to enter a digital processing block without serial-interface overhead, while programmable digital clamp and gain can help establish useful output limits and signal scaling. The designer must still verify input bandwidth, allowable voltage range, clock jitter, and synchronization with the communications waveform. Power-down can be useful during intermittent reception when the system can tolerate the associated restart timing.

🏭

Industrial Condition Monitoring

The THS1031CDW can be used in industrial monitoring systems that sample vibration, current, position, or another rapidly changing analog quantity and require a 10-bit result for analysis or control. The single-channel architecture keeps the signal path focused, and the 30-MSPS rate provides more temporal resolution than a low-speed measurement ADC. For machinery and factory equipment, short analog traces, stable reference design, and well-controlled grounding are essential. The commercial temperature grade supports standard commercial equipment, but deployment temperature and environmental requirements must be checked against the complete manufacturer specifications before installation.

💊

Medical Signal Monitoring

The THS1031CDW may serve in medical instrumentation as the conversion stage for a sampled physiological or diagnostic waveform. Its 10-bit resolution provides 1,024 output codes, while 30 MSPS offers substantial sampling headroom for pulse, echo, or burst-acquisition systems. The parallel output can feed an FPGA or embedded processor for filtering and feature extraction. Because medical systems impose application-specific validation requirements, engineers must confirm signal bandwidth, noise behavior, input limits, isolation architecture, and applicable product qualification before clinical use. No medical qualification is implied by the device’s commercial temperature grade.

⚙️

Control-System Feedback

The THS1031CDW is suitable for control and monitoring loops where the controller must observe a fast-changing analog feedback signal. Its pipelined architecture and 30-MSPS sampling rate reduce timing delay compared with many low-rate measurement converters, while the 10-bit parallel bus can feed a digital controller directly. The programmable clamp and gain features can help fit a known feedback range into the converter’s code range, and the out-of-range indication can flag abnormal input conditions. Loop bandwidth, pipeline delay, controller update timing, and signal polarity must be included in the control-system stability analysis.

🧩

Embedded Waveform Processing

The THS1031CDW supports embedded waveform processing where an analog signal must be sampled and presented as parallel digital data to an MCU, FPGA, or DSP. Its 2.7 V to 3.3 V operating range can simplify integration into a 3.3 V mixed-signal board, and the power-down function can reduce activity during inactive intervals. The system designer should partition analog and digital routing, place bypass and input-conditioning components close to the converter, and verify the sampling clock’s jitter and duty cycle. The converter’s pipeline latency and output timing should also be included in the end-to-end measurement calibration.

What is the THS1031CDW?
The THS1031CDW is a 10-bit, single-channel, 30-MSPS pipelined ADC with a parallel digital interface. According to the manufacturer datasheet, it is a low-power CMOS converter designed for a 2.7 V to 3.3 V supply range and is packaged in a 28-pin SOIC. Programmable digital clamp and gain functions, an out-of-range indicator, and power-down support make it suitable for compact high-speed data-acquisition and signal-monitoring systems.
What is the sampling rate of the THS1031CDW?
The THS1031CDW supports a maximum sampling rate of 30 MSPS. This means it can acquire up to 30 million analog samples per second under the operating conditions defined by the manufacturer datasheet. That rate is useful for communications, industrial measurement, control monitoring, and embedded processing systems that need faster conversion throughput than a low-speed general-purpose ADC.
What resolution does the THS1031CDW provide?
The THS1031CDW provides 10-bit resolution, producing 1,024 possible digital codes for each converted sample. Its resolution is paired with a 30 MSPS pipelined architecture and parallel output interface. The 10-bit format can be appropriate for waveform monitoring and control systems where the required vertical resolution and conversion speed fit the application.
What is the supply voltage of the THS1031CDW?
The THS1031CDW operates from 2.7 V to 3.3 V. The manufacturer datasheet identifies the device as a CMOS analog-to-digital converter with a 2.7 V minimum and 3.3 V maximum supply. A 3.3 V system can power the converter directly, while a lower-voltage design must confirm every input, clock, and digital-interface level against the device specifications before layout is released.
Where can I download the THS1031CDW datasheet PDF?
The THS1031CDW manufacturer datasheet is available from Texas Instruments through the official product-document link on this page. Use the pin-description table, recommended application circuit, input-range details, timing diagrams, and power-supply guidance in that document when assigning PCB tracks. The commercial listing confirms the 28-pin SOIC package, but the pin-by-pin mapping should always be taken from the current manufacturer document.
Where is the THS1031CDW pinout?
The THS1031CDW pinout is defined by its 28-pin SOIC pin-description table in the manufacturer datasheet. The product listings identify the DW package, 28 terminals, gull-wing leads, and rectangular body, but they do not provide individual signal names. Use the datasheet table to identify analog inputs, clocks, digital outputs, control inputs, supply pins, and ground connections before laying out the PCB.
What can replace the THS1031CDW?
A drop-in replacement for the THS1031CDW must use the same 28-pin SOIC footprint, preserve the 10-bit parallel interface, and remain electrically compatible with the 2.7 V to 3.3 V supply. No verified pin-compatible replacement is identified in the available substitution records, so a candidate should not be treated as interchangeable until its complete pin map, timing, input range, and control logic have been checked. Request a Quote for the original part or an engineering review of a proposed substitute.
Is the THS1031CDW the same as the THS1030CPWR?
The THS1031CDW and THS1030CPWR are not established as pin-compatible equivalents. The THS1031CDW is identified as a 28-pin SOIC device, while the comparison record identifies the THS1030CPWR as a separate TI pipelined ADC with a different package code. Because package and function differences may affect routing, clocking, and signal levels, verify the complete manufacturer pin tables before considering either part as a substitute.
What is the best Texas Instruments equivalent for the THS1031CDW?
No Texas Instruments drop-in equivalent is confirmed by the available cross-reference records. The THS1030CPWR appears in a comparison result, but the available information does not establish identical package pins or a 28-pin SOIC footprint. It therefore cannot be classified as a drop-in replacement. A valid choice must match the original package, 10-bit resolution, parallel output, supply range, sampling rate, and pin-level control behavior.
THS1031CDW vs THS1030CPWR: which is better for a high-speed acquisition system?
Choose the THS1031CDW when the design specifically requires a verified 28-pin SOIC footprint and its documented 10-bit, 30-MSPS pipelined conversion characteristics. The THS1030CPWR may be considered only after its manufacturer datasheet confirms equivalent pinout, timing, input range, supply requirements, and output behavior. Neither device should replace the other solely because both use pipelined ADC architectures.
When should I choose the THS1031CDW over a lower-speed ADC?
Choose the THS1031CDW when the signal path needs conversion rates approaching 30 MSPS and a parallel 10-bit output is acceptable. Its pipelined architecture is better aligned with high-speed acquisition than a low-speed successive-approximation ADC, while the 2.7 V to 3.3 V supply operation suits compact 3.3 V systems. Confirm bandwidth, settling time, and system clocking requirements before committing to the design.
Is the THS1031CDW suitable for an FPGA-based signal processor?
The THS1031CDW can suit an FPGA-based signal processor because it combines a 30-MSPS conversion rate with a 10-bit parallel interface. The parallel outputs can be captured directly when the FPGA timing and I/O resources match the converter’s output timing. Use the manufacturer timing diagrams to establish clock phase, data-valid timing, setup requirements, and any pipeline delay in the overall acquisition path.
Does the THS1031CDW have power-down capability?
Yes, the THS1031CDW includes a power-down function. The feature allows a system to place the converter into a lower-power operating state when continuous acquisition is unnecessary. The control levels, permitted transitions, startup behavior, and power-down timing must be taken from the manufacturer datasheet. Use power-down carefully in applications where rapid restart latency would interrupt signal capture.
What are the key specifications of THS1031CDW that engineers should know?
The THS1031CDW is a 10-bit, 30-MSPS, single-input pipelined ADC operating from 2.7 V to 3.3 V. It uses a parallel digital interface and a low-power CMOS implementation, includes programmable digital clamp and gain, provides an out-of-range indication, and supports power-down. The device is offered in a 28-pin SOIC DW package with gull-wing leads, rectangular body, commercial temperature grade, and RoHS3-compliant status.
Where to buy THS1031CDW online, and what are its price and lead time?
Use the Request a Quote form on this page to ask for THS1031CDW pricing, current stock, minimum order quantity, and production lead time. The request should identify the exact MPN THS1031CDW and the required tube packaging. The commercial listing confirms the part and its 28-pin SOIC configuration, but current transaction terms should be obtained directly through the form because quotation content and lead time can change.

بيانات مرجعية هندسية لـ THS1031CDW — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the THS1031CDW when a design requires a single-channel, 10-bit converter capable of 30-MSPS operation in a 28-pin SOIC package, particularly when parallel digital data, programmable digital clamp and gain, an out-of-range indicator, and power-down are useful. Its 2.7 V to 3.3 V range supports compact 3.3 V mixed-signal equipment. Consider the THS1030CPWR only after its pinout, package, timing, and control functions have been matched against the original design; the available comparison information does not establish drop-in compatibility. For another candidate, require the same 28-pin SOIC footprint, 10-bit parallel output, compatible clock and supply arrangement, comparable input range, and equivalent control behavior. If none can be demonstrated, plan a board revision rather than relying on functional similarity.

المقارنة مع البدائل

المعامل هذا المنتج
Package 28-pin SOIC (DW)
Brand Texas Instruments
Converter Type Pipelined ADC
Resolution 10 bit
Input Channels 1 channel
Maximum Sampling Rate 30 MSPS
Supply Voltage Range 2.7 V to 3.3 V
Digital Interface Parallel
Programmable Digital Clamp and Gain Yes
Out-of-Range Indication Yes
Power-Down Function Yes

أبرز الفروقات

  • High conversion throughput with parallel digital output (مقابلTHS1030CPWR)
  • Programmable signal-conditioning functions (مقابلTHS1030CPWR)
  • Low-voltage integration in a defined commercial package (مقابلTHS1030CPWR)

ملاحظات التصميم

Treat the analog input and sampling clock as coupled high-speed signals. Keep the input route short, avoid stubs and unnecessary vias, and place input-conditioning components close to the converter. Route the clock through a low-noise source with controlled edge rate and account for timing skew between the clock and output data. Use the manufacturer’s recommended application circuit and timing diagrams to establish where the clock originates and how the converter output connects to the FPGA or processor.

Separate the analog input path from digital outputs, clock routing, and switching-supply nodes. Place bypass capacitors at the converter’s supply and ground pins using short connections, and provide a quiet return path to the device ground rather than relying on a broad but resistive ground connection. Avoid running analog traces beneath noisy digital or power-conversion areas. The exact component values and placement should follow the manufacturer’s recommended layout to preserve 30-MSPS operation.

Do not treat a similar pipelined ADC as a drop-in substitute based only on resolution and sampling rate. A valid replacement must also match the 28-pin SOIC land pattern, supply pins, analog-input arrangement, clock interface, parallel output mapping, control signals, and timing behavior. Check power-down polarity, out-of-range signaling, digital clamp and gain semantics, and pipeline latency during design transfer. Request the current manufacturer pin table before finalizing a replacement board.

معلومات الامتثال

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The product listing identifies THS1031CDW as RoHS3 compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification claim is confirmed.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

THS1031CDW THS1031CDW datasheet THS1031CDW datasheet pdf THS1031CDW pinout THS1031CDW specifications THS1031CDW equivalent THS1031CDW replacement THS1031CDW cross reference THS1031CDW vs THS1030CPWR THS1031CDW 30 MSPS ADC THS1031CDW 28 pin SOIC THS1031CDW price

المكونات والمصطلحات ذات الصلة

Texas Instruments THS1031CDW THS1030CPWR analog-to-digital converter ADC pipelined ADC data-conversion IC integrated circuit analog signal processing 10-bit resolution 30 MSPS parallel digital interface programmable digital clamp programmable digital gain out-of-range indication power-down function 2.7 V to 3.3 V supply CMOS 28-pin SOIC DW package gull-wing leads tube packaging high-speed data acquisition RoHS3
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر