THS1031CDW - 10-Bit 30-MSPS Pipelined ADC | Texas Instruments
部品番号: THS1031CDW ✓ 生産中THS1031CDW 概要
An ADC is a data-acquisition IC that samples an analog voltage and converts it into a digital number. A pipelined ADC uses multiple internal stages to process successive samples in parallel, supporting higher conversion rates than a basic successive-approximation converter. Within the semiconductor hierarchy, the THS1031CDW is an ADC, a data-conversion IC, and a member of the broader integrated-circuit and analog signal-processing families.
Key features include 10-bit resolution, one analog input channel, a maximum conversion rate of 30 MSPS, and a 2.7 V to 3.3 V supply range. The 10-bit interface provides 1,024 digital codes across the selected input range. Programmable digital clamp and gain functions allow a system to constrain output behavior and apply digital scaling, while the out-of-range indication supports detection of input conditions beyond the programmed conversion range.
The THS1031CDW uses a pipelined architecture with a parallel output interface. CMOS implementation supports low-power operation, and the integrated power-down function can reduce consumption when acquisition is inactive. Its 28-pin SOIC package uses a rectangular gull-wing terminal arrangement and is available in a tube format according to the product listing. The commercial temperature grade makes the device suitable for standard commercial equipment when its specified operating limits are respected.
Typical applications include high-speed data acquisition, industrial measurement systems, communications receivers, control-system monitoring, medical instrumentation, and embedded signal processing. Its 30-MSPS sampling rate is particularly relevant to waveforms that require substantially faster sampling than a general-purpose low-speed measurement ADC. A parallel data bus also makes it practical for FPGA, CPLD, or digital-signal-processor capture systems with suitable input timing.
When laying out a circuit, treat the analog input as a high-speed signal path and keep routing short, controlled, and away from digital clocks and switching nodes. Follow the manufacturer datasheet for input-voltage limits, reference requirements, supply bypassing, clock timing, digital-output levels, and the correct power-down sequence. Decoupling capacitance and layout should be selected from the recommended application circuit rather than estimated from generic guidance.
This product guide organizes the verified electrical characteristics, package information, application considerations, and sourcing options for engineers evaluating the THS1031CDW. It also distinguishes documented converter capabilities from design assumptions and identifies where the exact pin mapping, lifecycle details, and qualified drop-in alternatives must be confirmed before a footprint or replacement decision is finalized.
ドロップイン代替品: THS1031CDW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストTHS1031CDW 最大定格&電気的特性
| Converter Type | Pipelined ADC |
| 分解能 | 10 bit |
| Input Channels | 1 channel |
| Maximum Sampling Rate | 30 MSPS |
| Supply Voltage Range | 2.7 V to 3.3 V |
| Process Technology | CMOS |
| Power Consumption | Low power |
| Digital Interface | Parallel |
| Digital Clamp | Programmable |
| Digital Gain | Programmable |
| Out-of-Range Indication | Yes |
| Power-Down Function | Yes |
| Temperature Grade | Commercial |
| パッケージ | 28-pin SOIC |
| Package Code | DW |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| ピン数 | 28 pins |
| RoHS ステータス | RoHS3 compliant |
THS1031CDW rectangular ピン配置ガイド
THS1031CDW (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: THS1031CDW.
詳細は データシート をご参照ください。
主な用途
THS1031CDW の用途: 6 件s: High-Speed Data Acquisition, Communications Receiver, Industrial Condition Monitoring, Medical Signal Monitoring, Control-System Feedback, Embedded Waveform Processing.
High-Speed Data Acquisition
The THS1031CDW fits acquisition systems requiring rapid conversion of a single analog channel at up to 30 MSPS. Its 10-bit parallel output provides a straightforward interface to an FPGA, CPLD, or digital signal processor when the converter’s clock and output timing match the receiving logic. The 2.7 V to 3.3 V supply range also supports compact 3.3 V instrumentation, although the source impedance, anti-alias filtering, and input voltage must be engineered around the manufacturer’s operating limits. Use short routing and controlled-impedance clock distribution to preserve the integrity of this high-speed analog-to-digital path.
Communications Receiver
The THS1031CDW’s 30-MSPS conversion capability is appropriate for receiver front ends that digitize an intermediate analog waveform before channel filtering, demodulation, or spectrum analysis. A 10-bit parallel interface permits each conversion result to enter a digital processing block without serial-interface overhead, while programmable digital clamp and gain can help establish useful output limits and signal scaling. The designer must still verify input bandwidth, allowable voltage range, clock jitter, and synchronization with the communications waveform. Power-down can be useful during intermittent reception when the system can tolerate the associated restart timing.
Industrial Condition Monitoring
The THS1031CDW can be used in industrial monitoring systems that sample vibration, current, position, or another rapidly changing analog quantity and require a 10-bit result for analysis or control. The single-channel architecture keeps the signal path focused, and the 30-MSPS rate provides more temporal resolution than a low-speed measurement ADC. For machinery and factory equipment, short analog traces, stable reference design, and well-controlled grounding are essential. The commercial temperature grade supports standard commercial equipment, but deployment temperature and environmental requirements must be checked against the complete manufacturer specifications before installation.
Medical Signal Monitoring
The THS1031CDW may serve in medical instrumentation as the conversion stage for a sampled physiological or diagnostic waveform. Its 10-bit resolution provides 1,024 output codes, while 30 MSPS offers substantial sampling headroom for pulse, echo, or burst-acquisition systems. The parallel output can feed an FPGA or embedded processor for filtering and feature extraction. Because medical systems impose application-specific validation requirements, engineers must confirm signal bandwidth, noise behavior, input limits, isolation architecture, and applicable product qualification before clinical use. No medical qualification is implied by the device’s commercial temperature grade.
Control-System Feedback
The THS1031CDW is suitable for control and monitoring loops where the controller must observe a fast-changing analog feedback signal. Its pipelined architecture and 30-MSPS sampling rate reduce timing delay compared with many low-rate measurement converters, while the 10-bit parallel bus can feed a digital controller directly. The programmable clamp and gain features can help fit a known feedback range into the converter’s code range, and the out-of-range indication can flag abnormal input conditions. Loop bandwidth, pipeline delay, controller update timing, and signal polarity must be included in the control-system stability analysis.
Embedded Waveform Processing
The THS1031CDW supports embedded waveform processing where an analog signal must be sampled and presented as parallel digital data to an MCU, FPGA, or DSP. Its 2.7 V to 3.3 V operating range can simplify integration into a 3.3 V mixed-signal board, and the power-down function can reduce activity during inactive intervals. The system designer should partition analog and digital routing, place bypass and input-conditioning components close to the converter, and verify the sampling clock’s jitter and duty cycle. The converter’s pipeline latency and output timing should also be included in the end-to-end measurement calibration.
エンジニアリング参考データ: THS1031CDW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 28-pin SOIC (DW) |
| Brand | Texas Instruments |
| Converter Type | Pipelined ADC |
| Resolution | 10 bit |
| Input Channels | 1 channel |
| Maximum Sampling Rate | 30 MSPS |
| Supply Voltage Range | 2.7 V to 3.3 V |
| Digital Interface | Parallel |
| Programmable Digital Clamp and Gain | Yes |
| Out-of-Range Indication | Yes |
| Power-Down Function | Yes |
主な差別化要因
- High conversion throughput with parallel digital output (vs THS1030CPWR)
- Programmable signal-conditioning functions (vs THS1030CPWR)
- Low-voltage integration in a defined commercial package (vs THS1030CPWR)
設計ノート
Treat the analog input and sampling clock as coupled high-speed signals. Keep the input route short, avoid stubs and unnecessary vias, and place input-conditioning components close to the converter. Route the clock through a low-noise source with controlled edge rate and account for timing skew between the clock and output data. Use the manufacturer’s recommended application circuit and timing diagrams to establish where the clock originates and how the converter output connects to the FPGA or processor.
Separate the analog input path from digital outputs, clock routing, and switching-supply nodes. Place bypass capacitors at the converter’s supply and ground pins using short connections, and provide a quiet return path to the device ground rather than relying on a broad but resistive ground connection. Avoid running analog traces beneath noisy digital or power-conversion areas. The exact component values and placement should follow the manufacturer’s recommended layout to preserve 30-MSPS operation.
Do not treat a similar pipelined ADC as a drop-in substitute based only on resolution and sampling rate. A valid replacement must also match the 28-pin SOIC land pattern, supply pins, analog-input arrangement, clock interface, parallel output mapping, control signals, and timing behavior. Check power-down polarity, out-of-range signaling, digital clamp and gain semantics, and pipeline latency during design transfer. Request the current manufacturer pin table before finalizing a replacement board.
コンプライアンス情報
The product listing identifies THS1031CDW as RoHS3 compliant. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification claim is confirmed.