NXP Semiconductors

TJA1028TK/5V0/10/Z - 5V LIN Transceiver | NXP

MPN: TJA1028TK/5V0/10/Z ✓ نشط
4.5 V to 28 V Vdss 70 mA Id 8-HVSON (3 mm x 3 mm) Package
الحد الأدنى للطلب: 1 |

TJA1028TK/5V0/10/Z نظرة عامة

The NXP Semiconductors TJA1028TK/5V0/10/Z is a LIN 2.0/2.1/SAE J2602 and ISO 17987-4:2016-compliant half-duplex LIN transceiver with an integrated 5.0 V low-dropout voltage regulator rated to deliver up to 70 mA. It operates from a 4.5 V to 28 V supply, supports 10.4 kbaud LIN communication, and is packaged in an 8-HVSON surface-mount package measuring 3 mm by 3 mm.

A LIN transceiver is an interface integrated circuit that connects a host microcontroller to a low-cost, single-wire automotive network. The LIN bus sits below the hierarchical level of a CAN network: LIN is a Local Interconnect Network commonly used for body electronics, comfort controls, lighting, seat functions, and other low-bandwidth vehicle nodes. The TJA1028 combines this network interface with a local regulator, allowing a compact node to obtain both LIN communication and a 5 V supply from one component.

Key features include bus wake-up, low-power mode, TXD timeout protection, thermal shutdown protection, and under-voltage detection. The integrated regulator provides up to 70 mA for local circuitry, while the 4.5 V to 28 V external supply range supports typical 12 V vehicle electrical systems. Its LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 compatibility makes it suitable for standardized in-vehicle networks.

Technically, the TJA1028 combines a LIN physical-layer transceiver with a regulated auxiliary output. The LIN side provides the physical signaling interface between logic-level TXD and RXD signals and the bus. The regulator side reduces the vehicle supply to a fixed 5.0 V. The manufacturer describes strong electrostatic robustness as a key design feature, which is important because vehicle wiring can be electrically noisy and subject to ESD events.

Typical applications include LIN door modules, seat-control units, switch banks, climate-control peripherals, ambient-lighting controllers, and compact body-control nodes. The 5 V variant is especially useful when a local sensor or actuator requires a regulated 5 V rail while the node communicates with a LIN master through the same wiring harness.

Design the 3 mm by 3 mm footprint on a multilayer board with short LIN routing, a stable ground connection, and protection appropriate to the vehicle harness. Follow the manufacturer datasheet for decoupling capacitors, LIN bus protection, pin assignments, and PCB footprint dimensions. The 70 mA regulator is intended for local logic loads rather than high-current actuators.

This page consolidates the device specifications, compliant LIN standards, package details, functional family alternatives, and practical design guidance into an engineering-focused reference for evaluating and implementing compact LIN nodes.

بدائل مباشرة لـ TJA1028TK/5V0/10/Z — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

TJA1028TK/3V3/10/Z

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-HVSON (3 mm x 3 mm)
Regulator output is 3.3 V instead of 5.0 V, a 1.7 V or 34.0% lower nominal output; other listed family functions and package dimensions remain aligned

📋 بديل مرجعي (غير موجود في الكتالوج)

TJA1028TK/5V0/10,1

✅ بديل مباشر
📦 8-HVSON (3 mm x 3 mm)
Identical 5.0 V LIN transceiver and 70 mA regulator ratings; ordering suffix differs by 0% in electrical performance

📋 بديل مرجعي (غير موجود في الكتالوج)

TJA1028TK/3V3/10,1

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 8-HVSON (3 mm x 3 mm)
Regulator output is 3.3 V instead of 5.0 V, a 1.7 V or 34.0% lower nominal output; ordering suffix differs from the target

📋 بديل مرجعي (غير موجود في الكتالوج)

TJA1028TK/5V0/10/Z المواصفات

Product Type LIN half-duplex transceiver with integrated voltage regulator
LIN Compliance LIN 2.0, LIN 2.1, SAE J2602
ISO Standard ISO 17987-4:2016 (12 V)
Supply Voltage Range 4.5 V to 28 V
Regulated Output Voltage 5.0 V
Integrated Regulator Output Current 70 mA
LIN Data Rate 10.4 kbaud
Communication Mode Half-duplex
العلبة 8-HVSON (3 mm x 3 mm)
نوع التركيب Surface mount
Bus Wake-Up Supported
Low-Power Mode Supported
TXD Timeout Protection Supported
Thermal Shutdown Protection Supported
Under-Voltage Detection Supported

دليل تكوين أطراف TJA1028TK/5V0/10/Z 8-hvson (3 mm x 3 mm)

تكوين الأطراف لـ TJA1028TK/5V0/10/Z (حزمة 8-hvson (3 mm x 3 mm)). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 8-hvson (3 mm x 3 mm) لـ TJA1028TK/5V0/10/Z

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TJA1028TK/5V0/10/Z.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TJA1028TK/5V0/10/Z مناسب لـ 6 التطبيقs: Automotive Door Control Module, Seat Control Peripheral, Automotive Switch Bank, Climate Control Peripheral, Automotive Lighting Controller, Compact Body Control Node.

🚗

Automotive Door Control Module

The TJA1028TK/5V0/10/Z fits a LIN-connected door node that must communicate with a vehicle master while powering local switches or sensors. Its 10.4 kbaud LIN interface supports the low-bandwidth body-electronics traffic used for switch positions, status reporting, and actuator commands. The integrated 5.0 V regulator can supply up to 70 mA to local logic, reducing the component count compared with a separate transceiver and low-dropout regulator. A 4.5 V to 28 V operating range accommodates a 12 V vehicle environment. Use the manufacturer pin and application guidance to place the exposed pad, connect the LIN network, and route the regulated 5 V rail away from sensitive switch inputs.

🚗

Seat Control Peripheral

A seat-control peripheral is a practical LIN application because it exchanges relatively slow commands and switch-position data rather than streaming high-bandwidth payloads. The TJA1028TK/5V0/10/Z provides the physical LIN interface at 10.4 kbaud and a fixed 5.0 V regulator output rated to 70 mA. That output can support local input logic or a small sensor interface, although motor and heating elements require separate drivers. The device also includes bus wake-up, TXD timeout protection, thermal shutdown, and under-voltage detection, helping the module recover predictably from faults. Keep the LIN route short, provide the bus components shown in the manufacturer application circuit, and verify the 5 V load against the regulator thermal limits.

🏭

Automotive Switch Bank

The TJA1028TK/5V0/10/Z can serve as the communication and local-power device for a compact bank of window, lighting, or climate switches connected to a LIN bus. Its 10.4 kbaud rate is appropriate for reporting individual switch states and receiving commands. The integrated 5.0 V regulator removes the need for a dedicated 5 V LDO when the load is no more than 70 mA, while under-voltage detection and TXD timeout protection improve system recovery behavior. Because switch inputs may experience harness noise and ESD, follow the manufacturer recommendations for bus protection, grounding, and component placement. The local rail should serve logic and sensing circuits only, not direct lamp or motor loads.

🏭

Climate Control Peripheral

A LIN climate-control peripheral can use the TJA1028TK/5V0/10/Z to connect a fan command, temperature sensor, or actuator-control MCU to the vehicle network. The transceiver supports LIN 2.0/2.1 and SAE J2602 operation at 10.4 kbaud, which matches command and diagnostic traffic in a compact body node. The fixed 5.0 V regulator output, rated to 70 mA, can power a sensor interface or low-current logic without a separate regulator. Low-power mode is useful for reducing consumption when the node is inactive, while bus wake-up allows the peripheral to resume when network activity occurs. Do not power fan motors, heaters, or solenoid valves from the regulator; use dedicated driver stages.

💡

Automotive Lighting Controller

The TJA1028TK/5V0/10/Z is suitable for a LIN-connected ambient-lighting or exterior-lighting controller that receives low-bandwidth commands from a central body controller. Its integrated 5.0 V output can supply up to 70 mA of control logic, while the LIN physical interface handles command reception and diagnostic responses at 10.4 kbaud. The half-duplex architecture supports a compact node implementation, and bus wake-up can reduce the energy required when the vehicle network wakes the module. High-current LEDs must use separate driver circuitry with appropriate transient protection. Keep the LIN trace physically robust, use the manufacturer's recommended bus network, and observe the exposed-pad land pattern to avoid thermal or assembly problems.

🖥️

Compact Body Control Node

The TJA1028TK/5V0/10/Z supports compact body-control nodes that combine LIN connectivity with a small regulated supply requirement. Its 4.5 V to 28 V input range, 5.0 V output, and 70 mA regulator capability allow it to operate from a 12 V vehicle battery while powering a local microcontroller or sensor interface. Integrated low-power mode, bus wake-up, under-voltage detection, TXD timeout protection, and thermal shutdown provide useful supervision for a distributed network. Board-space savings come from combining two functions in an 8-HVSON package, but thermal design and exposed-pad soldering remain essential. Use the NXP datasheet for the exact footprint, capacitors, LIN components, and recommended application layout.

ملخص المنتجات الموصى بها

TJA1028TK/5V0/10/Z NXP Semiconductors يُستخدم في: Automotive Door Control Module, Seat Control Peripheral, Automotive Switch Bank, Climate Control Peripheral, Automotive Lighting Controller, Compact Body Control Node TJA1028TK/5V0/10,1 Related TJA1028 ordering variant يُستخدم في: Automotive Door Control Module, Automotive Switch Bank, Automotive Lighting Controller TJA1028TK/3V3/10/Z Related 3.3 V family option for 3.3 V logic يُستخدم في: Seat Control Peripheral, Climate Control Peripheral TJA1028TK/3V3/10,1 Related 3.3 V family ordering variant يُستخدم في: Compact Body Control Node
What is the TJA1028TK/5V0/10/Z?
The TJA1028TK/5V0/10/Z is an NXP Semiconductors LIN 2.0/2.1/SAE J2602 and ISO 17987-4:2016-compliant half-duplex transceiver with an integrated 5.0 V regulator. According to the NXP manufacturer datasheet, the regulator can supply up to 70 mA, the device operates from 4.5 V to 28 V, and the LIN bus rate is 10.4 kbaud. It is intended for compact automotive LIN nodes that need both bus communication and a local regulated supply.
What is the operating voltage of TJA1028TK/5V0/10/Z?
The TJA1028TK/5V0/10/Z operates from 4.5 V to 28 V and produces a fixed 5.0 V regulator output. According to the NXP manufacturer datasheet, this supply range supports 12 V vehicle systems while accommodating the voltage range presented at a connected node. The integrated regulator can deliver up to 70 mA, but that current is intended for local electronics rather than power-hungry vehicle actuators.
How fast is the TJA1028TK/5V0/10/Z LIN bus?
The TJA1028TK/5V0/10/Z supports LIN communication at 10.4 kbaud. According to the NXP manufacturer datasheet, it complies with LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. This rate is appropriate for low-bandwidth body electronics such as door modules, seat controls, switch units, lighting controllers, and climate-control peripherals rather than high-throughput vehicle networks.
Where can I download the TJA1028TK/5V0/10/Z datasheet PDF?
The official TJA1028TK/5V0/10/Z datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1028.pdf. The manufacturer datasheet is the primary source for the LIN physical-layer behavior, integrated-regulator specifications, electrical characteristics, pin descriptions, and recommended application circuit. Use its package drawing and connection guidance when laying out the 8-HVSON footprint.
Where can I find the TJA1028TK/5V0/10/Z pinout?
The TJA1028TK/5V0/10/Z pinout is shown in the pin-description and package-drawing sections of the NXP manufacturer datasheet. The device uses an 8-HVSON package with a 3 mm by 3 mm body. Use the datasheet pin table to assign LIN, TXD, RXD, supply, ground, regulator output, and exposed-pad connections because physical orientation and exposed-pad requirements must follow the manufacturer drawing exactly.
Can TJA1028TK/5V0/10/Z replace a discrete LIN transceiver and regulator?
Yes, the TJA1028TK/5V0/10/Z can consolidate a discrete LIN transceiver and local low-dropout regulator when the alternative circuitry uses compatible logic and supply connections. Its key advantage is integration of a 10.4 kbaud LIN physical layer with a regulated 5.0 V output rated to 70 mA. The replacement must still be checked against the original board for pin mapping, regulator startup behavior, bus protection, and thermal requirements.
What can replace the TJA1028TK/5V0/10/Z?
The closest drop-in choices are pin-compatible variants in the same NXP TJA1028 family, including the 3.3 V regulator version and packaging-code variants of the 5 V device. A replacement must preserve the 8-HVSON footprint, LIN 2.0/2.1 compatibility, 4.5 V to 28 V supply rating, and required regulator output. Use the Request a Quote form on this page to ask about availability of the exact suffix and packing code.
Is TJA1028TK/5V0/10/Z suitable for automotive body modules?
Yes, the TJA1028TK/5V0/10/Z is suitable for low-bandwidth 12 V automotive body modules that use LIN and need a 5 V local supply. According to the NXP manufacturer datasheet, it meets LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 requirements and includes bus wake-up and strong electrostatic robustness. Automotive qualification details and the permitted temperature range should be confirmed for the specific production program.
TJA1028TK/5V0/10/Z versus TJA1028TK/3V3/10/Z: which is better?
Choose the 5.0 V version when the local node requires a 5 V rail, and choose the 3.3 V version when the connected logic operates at 3.3 V. Both belong to the same NXP TJA1028 family and provide an integrated LIN physical layer with up to 70 mA of regulated output. According to the NXP manufacturer datasheet, their principal functional difference is the fixed regulator output voltage.
When should I choose TJA1028TK/5V0/10/Z over a standalone LIN transceiver?
Choose the TJA1028TK/5V0/10/Z when the node also needs a regulated 5 V rail of up to 70 mA and board area is valuable. It combines the LIN physical layer with the regulator in one 8-HVSON package and includes bus wake-up, under-voltage detection, TXD timeout protection, thermal shutdown, and low-power operation. A standalone transceiver may be preferable when the local supply is already available or must exceed the regulator's 70 mA capability.
What is the best NXP equivalent for TJA1028TK/5V0/10/Z?
The best equivalent is the same NXP TJA1028 family member with the same 8-HVSON footprint, required regulator voltage, LIN data rate, and exact packing suffix. TJA1028TK/5V0/10,1 is a closely related ordering variant listed for the same device, while the 3.3 V variant is electrically suitable only when the local supply requirement can also change. Submit the required suffix through the Request a Quote form to confirm the exact orderable configuration.
How much current can the TJA1028TK/5V0/10/Z regulator provide?
The integrated regulator in the TJA1028TK/5V0/10/Z can deliver up to 70 mA at 5.0 V. According to the NXP manufacturer datasheet, this output is intended to support local node electronics while the device communicates over the LIN bus. Do not use it as a general-purpose actuator supply or exceed the regulator thermal and current limits shown in the manufacturer electrical characteristics.
What protection features does the TJA1028TK/5V0/10/Z provide?
The TJA1028TK/5V0/10/Z includes bus wake-up, low-power mode, TXD timeout protection, thermal shutdown protection, and under-voltage detection. According to the NXP manufacturer datasheet, the device also offers strong electrostatic robustness for reliable operation in electrically demanding vehicle systems. Harness-side transient protection and the required LIN bus components should still be implemented according to the recommended application circuit.
Is TJA1028TK/5V0/10/Z in stock and what is its lead time?
Current stock, quantity breaks, and manufacturing lead time should be requested through the Request a Quote form on this page. The form captures the exact TJA1028TK/5V0/10/Z suffix, required quantity, and delivery schedule so the request can be matched to current channel availability. The 8-HVSON package and exact ordering code should be stated in the request to avoid ambiguity with related TJA1028 variants.
How do I buy TJA1028TK/5V0/10/Z at the best price?
Use the Request a Quote form on this page to request the current price, stock, and lead time for the exact TJA1028TK/5V0/10/Z ordering code. Include your required quantity, shipment destination, and preferred packaging or delivery terms. This approach avoids confusing the 5 V device with the 3.3 V family variant or with a different packing suffix.
What are the key specifications of TJA1028TK/5V0/10/Z that engineers should know?
The key specifications are a 4.5 V to 28 V operating supply, fixed 5.0 V integrated regulator output up to 70 mA, 10.4 kbaud LIN operation, and an 8-HVSON 3 mm by 3 mm package. According to the NXP manufacturer datasheet, the device complies with LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016. It also supports bus wake-up, low-power mode, TXD timeout protection, thermal shutdown, and under-voltage detection.

بيانات مرجعية هندسية لـ TJA1028TK/5V0/10/Z — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose TJA1028TK/5V0/10/Z for a 12 V automotive LIN node whose local electronics require a fixed 5.0 V rail. Its integrated 5 V regulator can provide up to 70 mA, so it can replace a separate transceiver and low-dropout regulator when board area is important. Select TJA1028TK/3V3/10/Z or TJA1028TK/3V3/10,1 when the local logic operates at 3.3 V and the corresponding pin and footprint compatibility is confirmed. Use TJA1028TK/5V0/10,1 when it is the exact manufacturer ordering configuration required by your BOM or packaging process. None of these choices is suitable for directly powering motors, lamps, heaters, or solenoids. Regardless of variant, confirm the 8-HVSON footprint, LIN network components, decoupling requirements, thermal design, and vehicle-program qualification before release to production.

المقارنة مع البدائل

المعامل هذا المنتج TJA1028TK/3V3/10/Z TJA1028TK/5V0/10,1 TJA1028TK/3V3/10,1
Package 8-HVSON (3 mm x 3 mm) 8-HVSON (3 mm x 3 mm) 8-HVSON (3 mm x 3 mm) 8-HVSON (3 mm x 3 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Regulator Output Voltage 5.0 V 3.3 V 5.0 V 3.3 V
Integrated Regulator Output Current 70 mA 70 mA 70 mA 70 mA
LIN Data Rate 10.4 kbaud 10.4 kbaud 10.4 kbaud 10.4 kbaud
Operating Supply Range 4.5 V to 28 V 4.5 V to 28 V 4.5 V to 28 V 4.5 V to 28 V
LIN Compliance LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016 LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016 LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016 LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016
Integrated Regulator Yes, low-drop voltage regulator Yes, low-drop voltage regulator Yes, low-drop voltage regulator Yes, low-drop voltage regulator
Protection Features Bus wake-up, TXD timeout, thermal shutdown, under-voltage detection Bus wake-up, TXD timeout, thermal shutdown, under-voltage detection Bus wake-up, TXD timeout, thermal shutdown, under-voltage detection Bus wake-up, TXD timeout, thermal shutdown, under-voltage detection
Ordering Suffix TJA1028TK/5V0/10/Z TJA1028TK/3V3/10/Z TJA1028TK/5V0/10,1 TJA1028TK/3V3/10,1

أبرز الفروقات

  • LIN physical layer and local regulator integrated in one package (مقابلTJA1028TK/3V3/10/Z)
  • Exact electrical configuration retained by the /10,1 ordering variant (مقابلTJA1028TK/5V0/10,1)
  • Single-package regulation reduces board partitioning (مقابلTJA1028TK/3V3/10,1)

ملاحظات التصميم

Use the NXP manufacturer footprint and land-pattern dimensions for the 8-HVSON package, including its exposed thermal pad. Place the LIN bus components and required decoupling capacitors close to their associated pins, keep the LIN route short, and provide a low-impedance ground connection. Confirm whether the exposed pad is electrically tied to ground in the application circuit and follow the manufacturer's soldering and assembly guidance.

The integrated regulator is rated to deliver up to 70 mA at 5.0 V, but it is intended for local logic and sensing loads. Do not power motors, lamps, solenoids, or other high-current loads from this output. Maintain input and output capacitance required by the manufacturer datasheet, and verify the regulator's thermal behavior with the worst-case vehicle input voltage and expected local-load duty cycle.

Do not confuse the 5.0 V and 3.3 V TJA1028 variants or the /10/Z and /10,1 ordering suffixes. The regulator voltage must match the node's logic requirements, and the exact suffix must match the required ordering and packing configuration. Also avoid using the LIN interface for loads outside its 10.4 kbaud body-network application or omitting the bus protection and wake-up components shown in the manufacturer application circuit.

Place the LIN interface and regulator-return path so switching from other electronics on the board does not couple into the LIN signal or 5 V rail. Keep sensitive sensor nodes and high-current driver stages physically separated where practical. Use the manufacturer's specified bus and filter components, avoid long parallel LIN routing, and connect the package thermal pad according to the recommended layout so heat from the regulator does not create local temperature gradients near the transceiver.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The NXP datasheet identifies LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 (12 V) compliance. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not stated in the available product information and remain unknown.

تم التحقق من البيانات في: 2026-11-18 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

TJA1028TK/5V0/10/Z datasheet TJA1028TK/5V0/10/Z datasheet pdf TJA1028TK/5V0/10/Z pinout TJA1028TK/5V0/10/Z equivalent TJA1028TK/5V0/10/Z replacement TJA1028TK/5V0/10/Z price TJA1028TK/5V0/10/Z stock NXP TJA1028TK/5V0/10/Z TJA1028 5V 70mA LIN transceiver TJA1028TK/5V0/10/Z 8-HVSON TJA1028TK/5V0/10/Z automotive module TJA1028TK/5V0/10/Z vs TJA1028TK/3V3/10/Z what is TJA1028TK/5V0/10/Z where to buy TJA1028TK/5V0/10/Z

المكونات والمصطلحات ذات الصلة

NXP Semiconductors TJA1028TK/5V0/10/Z TJA1028TK/3V3/10/Z TJA1028TK/5V0/10,1 TJA1028TK/3V3/10,1 LIN transceiver LIN 2.0 LIN 2.1 SAE J2602 ISO 17987-4:2016 Local Interconnect Network half-duplex transceiver integrated low-drop voltage regulator power management IC semiconductor 8-HVSON QFN family surface mount SMD automotive body electronics bus wake-up TXD timeout protection thermal shutdown under-voltage detection
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر