NXP Semiconductors

TJA1028TK/5V0/20/J - 5V LIN Transceiver 8-HVSON | NXP

MPN: TJA1028TK/5V0/20/J ✓ نشط
12 V Vdss Up to 70 mA Id 8-pin HVSON, 3 x 3 mm Package
الحد الأدنى للطلب: 1 |

TJA1028TK/5V0/20/J نظرة عامة

The NXP Semiconductors TJA1028TK/5V0/20/J is a single-channel LIN bus transceiver with an integrated 5.0 V low-dropout voltage regulator, delivering up to 70 mA and packaged in an 8-pin HVSON 3 x 3 mm surface-mount package. It supports LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 12 V networks.

A LIN transceiver, also called a LIN interface controller or LIN system-basis chip, converts logic-level serial data between a microcontroller and a low-cost single-wire vehicle network. The TJA1028 combines bus-level receive and transmit functions with a local regulator, allowing a compact LIN node to power its host microcontroller or peripheral circuitry while communicating over the vehicle network.

The principal features include a 5.0 V regulator output, regulator capability of up to 70 mA, LIN 2.0 and LIN 2.1 compatibility, SAE J2602 and ISO 17987-4:2016 12 V compliance, and strong electrostatic-discharge robustness. The 3 x 3 mm HVSON package includes an exposed pad for improved heat transfer when the integrated regulator dissipates power.

The TJA1028 architecture is tailored to low-speed automotive and industrial LIN networks. Its integrated regulator reduces the number of discrete components needed for a basic LIN slave node, while the 8-pin package supports compact PCB placement. The product family is also offered in 3.3 V and 5.0 V regulator variants, allowing the interface voltage to match different host systems.

Typical uses include LIN-controlled vehicle modules, body-control electronics, sensor interfaces, door and seat modules, climate-control peripherals, and compact industrial LIN nodes. The device is particularly suitable when a local 5 V rail is required alongside LIN communications and board space is tightly constrained.

Use the manufacturer datasheet pin description and application circuit when assigning PCB tracks, decoupling, exposed-pad connections and bus protection. Confirm that the selected 5 V variant matches the host supply requirements and that the regulator load remains within the specified 70 mA capability.

This page combines the TJA1028 family specifications, package details, supported LIN standards and same-footprint ordering variants with practical guidance for PCB implementation, sourcing and design selection.

بدائل مباشرة لـ TJA1028TK/5V0/20/J — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

TJA1028TK/5V0/20/1

✅ بديل مباشر
📦 HVSON-8 (3 x 3 mm) with exposed pad
Same 5.0 V regulator, 20 variant and HVSON-8 footprint; documented as identical 13-inch tape-and-reel packing to the /J orderable code

📋 بديل مرجعي (غير موجود في الكتالوج)

TJA1028TK/5V0/20/X

✅ بديل مباشر
📦 HVSON-8 (3 x 3 mm) with exposed pad
Same 5.0 V regulator, 20 variant and HVSON-8 footprint; ordering suffix differs from /J without a stated electrical difference

📋 بديل مرجعي (غير موجود في الكتالوج)

TJA1028TK/5V0/20/J المواصفات

Product Type Single-channel LIN transceiver with integrated voltage regulator
LIN Bus Compatibility LIN 2.0 and LIN 2.1
Automotive Network Compliance SAE J2602 and ISO 17987-4:2016 for 12 V networks
Integrated Regulator Output 5.0 V
Integrated Regulator Current Up to 70 mA
Regulator Architecture Low-dropout voltage regulator
العلبة 8-pin HVSON, 3 x 3 mm
نوع التركيب Surface mount
Transceiver Configuration 1 transmitter and 1 receiver
ESD Robustness Strong electrostatic-discharge performance
LIN Bus Voltage Class 12 V
Packing 13-inch tape-and-reel
Maximum Supply Voltage 5.1 V
Minimum Supply Voltage 4.9 V
Maximum Supply Current 4.5 mA
Automotive Qualification AEC-Q100

دليل تكوين أطراف TJA1028TK/5V0/20/J 8-pin hvson, 3 x 3 mm

تكوين الأطراف لـ TJA1028TK/5V0/20/J (حزمة 8-pin hvson, 3 x 3 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 8-pin hvson, 3 x 3 mm لـ TJA1028TK/5V0/20/J

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TJA1028TK/5V0/20/J.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TJA1028TK/5V0/20/J مناسب لـ 6 التطبيقs: Automotive LIN Body-Control Nodes, Vehicle Sensor Interface Modules, Door and Seat Control Modules, Climate-Control Peripheral Interfaces, Industrial LIN Slave Modules, Compact LIN Actuator Controllers.

🚗

Automotive LIN Body-Control Nodes

The TJA1028TK/5V0/20/J fits compact automotive body-control modules that communicate over a LIN subnetwork and need a local 5 V supply. Its LIN 2.0 and LIN 2.1 compatibility, SAE J2602 alignment and ISO 17987-4:2016 support establish the interface behavior for 12 V vehicle networks. The integrated regulator supplies up to 70 mA, while the 8-pin HVSON package reduces PCB area compared with separate transceiver and regulator arrangements. Designers should allocate exposed-pad copper and place local decoupling near the device to preserve regulator stability and thermal performance.

🧩

Vehicle Sensor Interface Modules

The TJA1028TK/5V0/20/J is useful in LIN-connected sensor modules where the remote node combines communication and a small regulated load. The 5.0 V variant can power compatible sensing or interface circuitry up to the regulator's 70 mA capability without requiring a separate low-drop regulator. LIN 2.0 and 2.1 support provides a standardized physical layer for inexpensive single-wire networking. The compact 3 x 3 mm HVSON package is particularly valuable when the sensor assembly has limited board area, although the LIN bus and ground return still require robust vehicle-network layout practices.

🚗

Door and Seat Control Modules

Door locks, seat controls and related distributed vehicle modules commonly use LIN for low-cost communication with a central body controller. The TJA1028TK/5V0/20/J combines a LIN transceiver with a 5.0 V regulator capable of delivering up to 70 mA, allowing a compact slave node to support its host logic and local actuator interface. Its compliance with LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 supports integration into 12 V LIN systems. The exposed-pad package requires careful PCB thermal design if the regulator operates near its current limit.

🏭

Climate-Control Peripheral Interfaces

The TJA1028TK/5V0/20/J can serve as the network interface for compact climate-control peripherals that use a LIN command bus. The 5.0 V regulator provides up to 70 mA for a small local control or sensing section, while the integrated transceiver reduces the component count of the communication path. Compliance with LIN 2.0, LIN 2.1 and the cited 12 V automotive network standards makes the device suitable for distributed vehicle electronics. Layout should separate sensitive control circuitry from LIN and supply-return paths where practical.

🏭

Industrial LIN Slave Modules

The TJA1028TK/5V0/20/J can be used in industrial LIN slave modules that need a standardized single-wire interface and a local 5 V rail. Although the family is designed around automotive LIN networks, its LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 compatibility provides a defined bus interface. The integrated regulator eliminates a separate regulator when the peripheral load is no more than 70 mA. Designers should verify EMC, transient and wiring requirements for the final industrial installation before approving the device.

🔧

Compact LIN Actuator Controllers

The TJA1028TK/5V0/20/J fits compact actuator controllers where a LIN command interface and regulated local supply share one package. Its 70 mA regulator capability can support control logic and limited peripheral circuitry, while the small 8-pin HVSON footprint preserves board area around the actuator driver. The device's LIN 2.0 and 2.1 behavior and stated 12 V network compliance support robust distributed control. The PCB should implement the manufacturer land pattern, exposed-pad connection and decoupling arrangement to maintain reliable regulation and thermal performance.

ملخص المنتجات الموصى بها

TJA1028TK/5V0/20/1 Same-device ordering variant for equivalent 5 V LIN node designs يُستخدم في: Automotive LIN Body-Control Nodes, Vehicle Sensor Interface Modules, Door and Seat Control Modules, Climate-Control Peripheral Interfaces, Industrial LIN Slave Modules, Compact LIN Actuator Controllers TJA1028TK/5V0/20/X Same-package alternative ordering configuration يُستخدم في: Automotive LIN Body-Control Nodes, Vehicle Sensor Interface Modules, Door and Seat Control Modules, Climate-Control Peripheral Interfaces, Industrial LIN Slave Modules, Compact LIN Actuator Controllers
What is the TJA1028TK/5V0/20/J?
The TJA1028TK/5V0/20/J is an NXP single-channel LIN transceiver with an integrated 5.0 V low-dropout regulator. According to the NXP TJA1028 datasheet, the device supports LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 for 12 V networks. Its integrated regulator can supply up to 70 mA, and the device is packaged in an 8-pin HVSON package measuring 3 x 3 mm.
What does the 5V0 designation mean in TJA1028TK/5V0/20/J?
The 5V0 designation identifies the integrated regulator's nominal output as 5.0 V. The TJA1028 family is also offered in a 3.3 V version, so the suffix is important when selecting a device for a specific host supply. According to the NXP TJA1028 datasheet, the regulator can deliver up to 70 mA, allowing compatible local circuitry to share the compact 8-pin HVSON device.
Where can I download the TJA1028TK/5V0/20/J datasheet PDF?
The official TJA1028 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1028.pdf. It describes the LIN transceiver, integrated regulator, electrical characteristics, package information and recommended application circuit. Use the manufacturer's document when assigning pins, selecting decoupling and checking bus-level operating limits for the TJA1028TK/5V0/20/J.
Where can I find the TJA1028TK/5V0/20/J pinout?
The TJA1028TK/5V0/20/J pinout is shown in the NXP TJA1028 datasheet and corresponds to the 8-pin HVSON 3 x 3 mm package with an exposed thermal pad. The exposed pad is part of the package thermal and electrical construction and must be connected according to the manufacturer land pattern and application diagram. Confirm every signal name against the pin-description table before routing the PCB.
Where can I buy TJA1028TK/5V0/20/J online?
The TJA1028TK/5V0/20/J can be requested through the Request a Quote form on this page. The exact orderable MPN includes the 5.0 V regulator option, 20 variant, /J packing suffix and HVSON package configuration. Current availability, minimum order quantity and lead time should be confirmed with the supplier while entering the full MPN.
What is the price of TJA1028TK/5V0/20/J?
Current pricing for the TJA1028TK/5V0/20/J is obtained through the Request a Quote form on this page. The quote request should include the full MPN, required quantity, package form and target delivery date. The 5.0 V variant and /J packing suffix must be preserved because the TJA1028 family also includes 3.3 V versions and different ordering codes.
What is the lead time for TJA1028TK/5V0/20/J?
The current lead time for TJA1028TK/5V0/20/J should be confirmed through the Request a Quote form on this page. Include the required order quantity and whether multiple production dates are acceptable. Because the device is ordered with a specific 5.0 V regulator option and /J packing suffix, using the complete MPN prevents confusion with other TJA1028 ordering variants.
Is TJA1028TK/5V0/20/J currently in stock?
Current inventory for the TJA1028TK/5V0/20/J must be confirmed through the Request a Quote form on this page. Submit the exact MPN and required quantity so the supplier can check the 5.0 V, 20 and /J configuration against available inventory. For production planning, request a dated supply commitment rather than relying on a generic family-level stock statement.
What is the difference between TJA1028TK/5V0/20/J and TJA1028TK/5V0/20/1?
The TJA1028TK/5V0/20/J and TJA1028TK/5V0/20/1 use the same 8-pin HVSON device configuration, including the 5.0 V integrated regulator, while differing in their orderable packing suffix. NXP community information identifies the /J and /1 parts as using identical 13-inch tape-and-reel packing. The /1 listing also specifies a 4.9 V to 5.1 V supply range and a 4.5 mA maximum supply current.
Can TJA1028TK/5V0/20/1 replace TJA1028TK/5V0/20/J?
Yes, the TJA1028TK/5V0/20/1 can be used as a same-footprint alternative to the TJA1028TK/5V0/20/J when the required packing format is acceptable. NXP community guidance states that both use identical 13-inch tape-and-reel packing, and both correspond to the 5.0 V, 20 variant in the 8-pin HVSON package. Buyers should still verify their approved parts list and traceability requirements before changing the orderable MPN.
What is the best drop-in replacement for TJA1028TK/5V0/20/J?
The closest documented drop-in replacement is the NXP TJA1028TK/5V0/20/1 because it retains the 5.0 V regulator option, 20 variant and 8-pin HVSON footprint while using the same 13-inch tape-and-reel packing. The TJA1028TK/5V0/20/X is another same-package ordering variant. Confirm the exact suffix required by production and compare the ordering information before approving either change.
When should I choose TJA1028TK/5V0/20/J instead of another TJA1028 variant?
Choose the TJA1028TK/5V0/20/J when the design requires a 5.0 V LIN interface, an integrated regulator capable of up to 70 mA and the /J tape-and-reel ordering form. Select the 3.3 V family variant when the host circuitry requires a 3.3 V local rail. Use TJA1028TK/5V0/20/1 or /X only when their documented packing convention satisfies the assembly process.
Is the TJA1028TK/5V0/20/J suitable for automotive LIN networks?
The TJA1028TK/5V0/20/J is suitable for automotive LIN network designs because the TJA1028 family supports LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 for 12 V networks. It also offers strong electrostatic-discharge performance and is identified as AEC-Q100 in product listings. Final vehicle qualification remains a system-level responsibility, including transient, EMC and environmental requirements.
How much current can the TJA1028 integrated regulator supply?
The integrated low-drop voltage regulator in the TJA1028 can deliver up to 70 mA. According to the NXP TJA1028 datasheet, the 5.0 V version in the TJA1028TK/5V0/20/J is intended to provide a local rail alongside LIN communication. Account for regulator dissipation, exposed-pad thermal performance and host-current margin when sizing the local supply.
What are the key specifications of TJA1028TK/5V0/20/J that engineers should know?
The key TJA1028TK/5V0/20/J specifications are a 5.0 V integrated regulator output, up to 70 mA regulator capability, LIN 2.0 and 2.1 support, SAE J2602 and ISO 17987-4:2016 12 V compliance, and an 8-pin HVSON 3 x 3 mm package. The family also provides strong ESD performance. These parameters define the device as a compact LIN system-basis transceiver for automotive and industrial networks.
What can replace TJA1028TK/5V0/20/J?
The TJA1028TK/5V0/20/1 and TJA1028TK/5V0/20/X are same-brand, same-package alternatives documented alongside the TJA1028TK/5V0/20/J. The /1 part is described as having identical 13-inch tape-and-reel packing to the /J version, while both retain the 8-pin HVSON format and 5.0 V regulator option. No verified cross-brand drop-in equivalent was identified, so a PCB-level substitute should not be assumed.
Is TJA1028TK/5V0/20/J the same as TJA1028TK/5V0/20/1?
The TJA1028TK/5V0/20/J and TJA1028TK/5V0/20/1 are electrically and mechanically equivalent orderable versions, with the principal documented difference being their orderable suffix and packing presentation. NXP community guidance states that the /J and /1 parts use identical 13-inch tape-and-reel packing. Both identify the same 5.0 V, 20 variant in an 8-pin HVSON package, subject to normal procurement approval.
What is the best NXP equivalent for TJA1028TK/5V0/20/J?
The best documented NXP equivalent is the TJA1028TK/5V0/20/1 because it preserves the 5.0 V integrated regulator, 20 variant, 8-pin HVSON footprint and 13-inch tape-and-reel format. The TJA1028TK/5V0/20/X also offers the same core package and electrical configuration. Choose according to the exact packing and ordering requirements of the assembly and purchasing systems.

بيانات مرجعية هندسية لـ TJA1028TK/5V0/20/J — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the TJA1028TK/5V0/20/J for a compact 12 V LIN node that requires a 5.0 V local rail and uses the /J orderable configuration. The integrated regulator can provide up to 70 mA, while LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 support make it suitable for qualified vehicle-network designs. Select TJA1028TK/5V0/20/1 when that documented suffix matches the purchasing and packing system; NXP describes its 13-inch tape-and-reel packing as identical. TJA1028TK/5V0/20/X is another same-package sourcing option. Do not select the 3.3 V TJA1028 variant when the host requires a 5.0 V rail, and do not treat a generic LIN transceiver without an integrated regulator as a drop-in replacement.

المقارنة مع البدائل

المعامل هذا المنتج TJA1028TK/5V0/20/1 TJA1028TK/5V0/20/X
Package HVSON-8 (3 x 3 mm) with exposed pad HVSON-8 (3 x 3 mm) with exposed pad HVSON-8 (3 x 3 mm) with exposed pad
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Type Single-channel LIN transceiver with integrated voltage regulator Single-channel LIN transceiver with integrated voltage regulator Single-channel LIN transceiver with integrated voltage regulator
Integrated Regulator Output 5.0 V 5.0 V 5.0 V
Regulator Output Current Up to 70 mA Up to 70 mA for the TJA1028 family Up to 70 mA for the TJA1028 family
LIN Compatibility LIN 2.0 and LIN 2.1 LIN 2.0 and LIN 2.1 LIN 2.0 and LIN 2.1
Automotive Network Compliance SAE J2602 and ISO 17987-4:2016 for 12 V SAE J2602 and ISO 17987-4:2016 for 12 V SAE J2602 and ISO 17987-4:2016 for 12 V
Ordering and Packing /J, 13-inch tape and reel /1, documented as identical 13-inch tape-and-reel packing /X ordering suffix

أبرز الفروقات

  • Combines LIN communication and a local 5.0 V supply in one package (مقابلTJA1028TK/5V0/20/1)
  • Uses the same documented 13-inch tape-and-reel presentation as the /1 ordering code (مقابلTJA1028TK/5V0/20/1)
  • Maintains the same integrated-rail architecture across available ordering suffixes (مقابلTJA1028TK/5V0/20/X)

ملاحظات التصميم

Implement the manufacturer HVSON-8 land pattern and connect the exposed pad to the recommended ground plane with adequate via coverage. Place input and output capacitors close to their corresponding pins, and minimize the distance between the LIN transceiver return path and the device ground reference. The 3 x 3 mm package saves area, but its exposed pad is important for both electrical stability and heat removal.

Estimated regulator dissipation equals the voltage difference between the input supply and the 5.0 V output multiplied by the load current. For example, using a 5.1 V input, a 5.0 V output and a 40 mA load gives approximately 0.004 W because the available voltage drop is only 0.1 V. Use the actual minimum input voltage, maximum output voltage and highest operating load for the worst-case thermal assessment, and provide copper beneath the exposed pad.

Do not treat TJA1028TK/5V0/20/1 or TJA1028TK/5V0/20/X as different electrical regulators merely because their ordering suffixes differ. Conversely, do not substitute the 3.3 V family variant into a design that requires 5.0 V. Confirm the complete orderable MPN, regulator output, package, exposed-pad treatment and packing requirements before releasing a production BOM.

Route the LIN connection as a controlled bus with the shortest practical path to the connector or network interface. Keep the regulator and digital return path compact, and follow the recommended grounding and capacitor arrangement from the NXP datasheet. LIN is a single-wire network, so bus topology, termination practices and protection requirements should be evaluated at the vehicle or system level rather than handled solely within the transceiver footprint.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

A product listing identifies the TJA1028TK/5V0/20/J as AEC-Q100 automotive qualified. RoHS, REACH, lead-free, halogen-free and conflict-minerals declarations were not included in the supplied manufacturer information.

عمليات بحث ذات صلة

TJA1028TK/5V0/20/J datasheet TJA1028TK/5V0/20/J pinout TJA1028TK/5V0/20/J replacement TJA1028TK/5V0/20/J equivalent TJA1028TK/5V0/20/J price TJA1028TK/5V0/20/J stock TJA1028TK 5V LIN transceiver TJA1028TK HVSON-8 application circuit TJA1028TK/5V0/20/J vs TJA1028TK/5V0/20/1 NXP TJA1028TK/5V0/20/J TJA1028TK 70mA regulator LIN TJA1028TK 5V 8-HVSON

المكونات والمصطلحات ذات الصلة

NXP Semiconductors TJA1028TK/5V0/20/J TJA1028TK/5V0/20/1 TJA1028TK/5V0/20/X LIN transceiver LIN interface controller LIN system-basis chip Local Interconnect Network automotive network integrated voltage regulator low-dropout regulator 5.0 V power rail LIN 2.0 LIN 2.1 SAE J2602 ISO 17987-4:2016 AEC-Q100 electrostatic-discharge robustness HVSON-8 QFN family surface-mount package exposed thermal pad 12 V automotive electrical system 70 mA regulator output
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر