TLV2471CP - 6V, 2.8MHz RRIO Op Amp | Texas Instruments
MPN: TLV2471CP ✓ نشطTLV2471CP نظرة عامة
An operational amplifier is a voltage-controlled differential amplifier that uses feedback to amplify a voltage difference between its non-inverting and inverting inputs. The TLV2471 belongs to the CMOS operational-amplifier hierarchy and combines rail-to-rail signal handling, low-noise behavior, and low supply current in a general-purpose precision amplifier. Rail-to-rail input and output operation allows the amplifier to process signals close to the supply rails, making it useful in portable instrumentation and low-voltage signal-conditioning systems.
Key features include a 2.8 MHz gain-bandwidth product, 78 dB CMRR, approximately 2.5 pA input bias current, and 15 nV/√Hz input noise density. The TLV247x family consumes approximately 600 µA per channel, helping limit power consumption in battery-operated and low-leakage measurement systems. Its operating-temperature range extends from -40°C to +125°C, supporting industrial and automotive-temperature applications when the complete system qualification requirements are satisfied.
The TLV2471 uses CMOS technology with high-drive, rail-to-rail input and output stages. At a typical gain of one, the 2.8 MHz gain-bandwidth product corresponds to approximately 560 ns rise time under small-signal conditions. The low input bias current reduces error when sensing high-impedance sources, while the 78 dB CMRR helps reject common-mode interference. Because the output can approach either supply rail, output swing limits and load-current requirements remain important in practical designs.
Typical uses include battery-powered sensor interfaces, portable measurement equipment, industrial transducers, low-side current monitoring, audio and communication signal conditioning, and general-purpose voltage amplification. The TLV2471CP is particularly appropriate where a through-hole package is preferred for prototypes, repair work, or manually assembled industrial control boards.
Designers should place the feedback network close to the amplifier, use short ground-return paths, and decouple the supply pins close to the device. The output must remain within the device's rated output-voltage and output-current limits, and input common-mode voltage must remain within the supported range. Stable operation at the selected noise gain should be verified against the manufacturer's recommended circuit configuration.
This page combines the TLV2471CP electrical characteristics, package information, engineering applications, design guidance, and same-footprint replacement options into a practical component-selection resource for procurement and hardware design teams.
بدائل مباشرة لـ TLV2471CP — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع TLV2471CP (نفس عامل الشكل والبصمة) — يختلف في Amplifier Type, Package.
TLV2471AIP
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
TLV2471CPE4
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
TLV2471IP
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
TLV2471CP الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Single-channel general-purpose operational amplifier |
| Number of Channels | 1 channel |
| Maximum Supply Voltage | 6 V |
| Gain-Bandwidth Product | 2.8 MHz |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Common-Mode Rejection Ratio | 78 dB |
| Input Voltage Noise Density | 15 nV/√Hz |
| Input Bias Current | 2.5 pA |
| Supply Current per Channel | 600 µA |
| Technology | LiNCMOS |
| Output Drive Capability | High-drive operational amplifier |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +125°C |
| العلبة | 8-pin PDIP |
| نمط التركيب | Through-hole |
تكوين أطراف TLV2471CP
| دبوس 1 | OUT — Analog output |
| دبوس 2 | IN− — Inverting input |
| دبوس 3 | IN+ — Non-inverting input |
| دبوس 4 | V− — Negative supply connection |
| دبوس 5 | NC — Not connected |
| دبوس 6 | NC — Not connected |
| دبوس 7 | NC — Not connected |
| دبوس 8 | V+ — Positive supply connection |
التطبيقات النموذجية
TLV2471CP مناسب لـ 6 التطبيقs: Battery-Powered Sensor Conditioning, Industrial Transducer Interface, Portable Measurement Instrument, Low-Side Current Monitoring, Audio and Communication Buffering, Prototype and Repair Circuit.
Battery-Powered Sensor Conditioning
The TLV2471CP fits low-power sensor interfaces because its rail-to-rail input and output stages operate close to the supply limits while consuming approximately 600 µA per channel. A 2.5 pA input bias current minimizes disturbance of high-impedance sensing elements, and the 2.8 MHz gain-bandwidth product supports moderate-frequency amplification and filtering. The device can be configured as a non-inverting or inverting amplifier around a precision reference. Design tradeoffs include confirming the input common-mode range during battery discharge and verifying output swing at the highest expected signal level.
موصى به
Industrial Transducer Interface
The TLV2471CP provides a practical input stage for low-level industrial transducer signals because its 78 dB CMRR helps suppress common-mode noise and its CMOS input draws only about 2.5 pA of bias current. The 2.8 MHz gain-bandwidth product permits useful closed-loop bandwidth for many pressure, temperature, and position sensors without pushing the amplifier into excessive noise gain. The -40°C to +125°C operating range supports demanding industrial environments. Confirm the sensor output range, ground offsets, and isolation boundaries before connecting external wiring.
موصى به
Portable Measurement Instrument
The TLV2471CP suits portable measurement instruments that need accurate signal amplification with limited power consumption. Its approximately 600 µA per-channel current helps preserve battery life, while the 2.8 MHz gain-bandwidth product and 15 nV/√Hz input noise support sensitive acquisition stages. Rail-to-rail operation increases usable input range in compact dual-supply systems. Keep the layout short and quiet because high-impedance inputs can couple noise from nearby digital and switching circuitry. Stable feedback compensation should be checked for the selected noise gain.
موصى به
Low-Side Current Monitoring
The TLV2471CP can amplify the small differential voltage produced by a low-side current shunt when the amplifier's common-mode input range accommodates the shunt voltage. Its 78 dB CMRR improves rejection of supply ripple and adjacent switching-node interference, while the low 2.5 pA bias current limits unintended current through high-value shunt networks. The 2.8 MHz gain-bandwidth product is suitable for many monitoring and control loops. The shunt resistance, amplifier offset, trace resistance, and thermal effects must be evaluated together for accurate measurement.
موصى به
Audio and Communication Buffering
The TLV2471CP provides useful bandwidth for audio-frequency and low-speed communication signal buffering, with a 2.8 MHz gain-bandwidth product and rail-to-rail output capability. The high-drive CMOS architecture can drive typical high-impedance buffer stages more effectively than a general-purpose low-power amplifier. The approximately 600 µA per-channel consumption supports portable equipment, and 15 nV/√Hz input noise is favorable for low-level signals. Check capacitive-load stability, output-current limits, and the available output-voltage headroom when driving filters or downstream stages.
موصى به
Prototype and Repair Circuit
The 8-pin PDIP package makes the TLV2471CP convenient for prototypes, educational circuits, and repair assemblies where through-hole soldering is preferred. It retains the same practical rail-to-rail behavior and 2.8 MHz gain-bandwidth product expected from the TLV2471 family. Through-hole accessibility also simplifies inspection and rework compared with a fine-pitch surface-mount package. Engineers should still follow the manufacturer pin-description table, preserve adequate input and output grounding, and observe the published common-mode and supply limits rather than assuming universal rail-to-rail operation.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ TLV2471CP — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | TLV2471AIP | TLV2471CPE4 | TLV2471IP |
|---|---|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Single amplifier | Single amplifier | Single amplifier | Single amplifier |
| Maximum Supply Voltage | 6 V | 6 V | 6 V | 6 V |
| Gain-Bandwidth Product | 2.8 MHz | 2.8 MHz | 2.8 MHz | 2.8 MHz |
| Supply Current per Channel | 600 µA | 600 µA | 600 µA | 600 µA |
| Rail-to-Rail Input and Output | Yes | Yes | Yes | Yes |
أبرز الفروقات
- Maintains the family's 2.8 MHz gain-bandwidth product in an 8-pin PDIP package (مقابلTLV2471AIP)
- Combines 78 dB CMRR with a 2.5 pA input bias current (مقابلTLV2471CPE4)
- Rail-to-rail input and output operation at a 6 V maximum supply (مقابلTLV2471IP)
ملاحظات التصميم
Place the feedback resistors and compensation components directly beside pins 1, 2, and 3, and keep the input traces short and away from switching nodes. Because the TLV2471CP has approximately 2.5 pA input bias current, high-impedance designs can be influenced by PCB contamination and leakage. Use a clean board surface and guard or shield the non-inverting input when the source impedance is sufficiently high.
Configure the amplifier for a stable noise gain according to the manufacturer's recommended application circuits. The 2.8 MHz gain-bandwidth product provides useful closed-loop bandwidth, but an excessively high noise gain can reduce stability and increase output-noise amplification. Check the complete feedback network, source impedance, and capacitive loading rather than relying on nominal gain-bandwidth alone.
Do not assume that rail-to-rail input and output operation permits arbitrary input or output levels. Verify the input common-mode range under supply tolerance, temperature, and startup conditions, and confirm that the required output swing remains inside the linear-output region. The 6 V maximum supply rating is also an absolute device limit, not the recommended operating point.
Estimated: at a 5 V supply and approximately 600 µA per-channel current, the TLV2471CP consumes about 3 mW per amplifier, calculated as 5 V multiplied by 600 µA. This estimate excludes output-current dissipation and load-dependent changes in supply current. Keep supply bypassing close to pins 4 and 8 and verify total system consumption when estimating battery life.
معلومات الامتثال
Compliance attributes were not explicitly stated in the available manufacturer or distributor information and must be confirmed from the applicable Texas Instruments product documentation before procurement.