Texas Instruments

TLV2471CP - 6V, 2.8MHz RRIO Op Amp | Texas Instruments

MPN: TLV2471CP ✓ Aktif
6 V Vdss 2.5 pA Id 8-pin PDIP Package
MOQ: 1 |

TLV2471CP Genel Bakış

The Texas Instruments TLV2471CP is a single-channel, rail-to-rail input and output operational amplifier rated for supplies up to 6 V, with a 2.8 MHz gain-bandwidth product, 78 dB common-mode rejection, and 15 nV/√Hz input-voltage-noise density. The device is packaged for through-hole installation in an 8-pin PDIP package.

An operational amplifier is a voltage-controlled differential amplifier that uses feedback to amplify a voltage difference between its non-inverting and inverting inputs. The TLV2471 belongs to the CMOS operational-amplifier hierarchy and combines rail-to-rail signal handling, low-noise behavior, and low supply current in a general-purpose precision amplifier. Rail-to-rail input and output operation allows the amplifier to process signals close to the supply rails, making it useful in portable instrumentation and low-voltage signal-conditioning systems.

Key features include a 2.8 MHz gain-bandwidth product, 78 dB CMRR, approximately 2.5 pA input bias current, and 15 nV/√Hz input noise density. The TLV247x family consumes approximately 600 µA per channel, helping limit power consumption in battery-operated and low-leakage measurement systems. Its operating-temperature range extends from -40°C to +125°C, supporting industrial and automotive-temperature applications when the complete system qualification requirements are satisfied.

The TLV2471 uses CMOS technology with high-drive, rail-to-rail input and output stages. At a typical gain of one, the 2.8 MHz gain-bandwidth product corresponds to approximately 560 ns rise time under small-signal conditions. The low input bias current reduces error when sensing high-impedance sources, while the 78 dB CMRR helps reject common-mode interference. Because the output can approach either supply rail, output swing limits and load-current requirements remain important in practical designs.

Typical uses include battery-powered sensor interfaces, portable measurement equipment, industrial transducers, low-side current monitoring, audio and communication signal conditioning, and general-purpose voltage amplification. The TLV2471CP is particularly appropriate where a through-hole package is preferred for prototypes, repair work, or manually assembled industrial control boards.

Designers should place the feedback network close to the amplifier, use short ground-return paths, and decouple the supply pins close to the device. The output must remain within the device's rated output-voltage and output-current limits, and input common-mode voltage must remain within the supported range. Stable operation at the selected noise gain should be verified against the manufacturer's recommended circuit configuration.

This page combines the TLV2471CP electrical characteristics, package information, engineering applications, design guidance, and same-footprint replacement options into a practical component-selection resource for procurement and hardware design teams.

Drop-in alternatifler için TLV2471CP — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller TLV2471CP (aynı form faktörü ve ayağa oturma) — farklı olan Amplifier Type, Package.

Texas Instruments
Amplifier Type: Single operational amplifier
Package: 8-pin SOIC (D)
İle Karşılaştır TLV2471CP →

TLV2471AIP

✅ Yerleştirme
📦 8-pin PDIP
The published 2.8 MHz gain-bandwidth product and approximately 600 µA per-channel current are unchanged, creating a 0 MHz bandwidth difference and 0 µA current difference; grade and qualification must still be compared.

📋 Katalogda Olmayan Referans Alternatifi

TLV2471CPE4

✅ Yerleştirme
📦 8-pin PDIP
The family gain-bandwidth product remains 2.8 MHz, a 0 MHz difference from TLV2471CP, while suffix-specific temperature treatment and qualifications may differ.

📋 Katalogda Olmayan Referans Alternatifi

TLV2471IP

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-pin PDIP
The TLV2471 family's 2.8 MHz gain-bandwidth product is retained, a 0 MHz difference, while the exact suffix-specific grade and temperature limits require verification.

📋 Katalogda Olmayan Referans Alternatifi

TLV2471CP Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Single-channel general-purpose operational amplifier
Number of Channels 1 channel
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 2.8 MHz
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Common-Mode Rejection Ratio 78 dB
Input Voltage Noise Density 15 nV/√Hz
Input Bias Current 2.5 pA
Supply Current per Channel 600 µA
Technology LiNCMOS
Output Drive Capability High-drive operational amplifier
Minimum Operating Temperature -40°C
Maximum Operating Temperature +125°C
Paket 8-pin PDIP
Montaj Stili Through-hole

TLV2471CP Pin Yapısı

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 OUT — Analog output
Pin 2 IN− — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V− — Negative supply connection
Pin 5 NC — Not connected
Pin 6 NC — Not connected
Pin 7 NC — Not connected
Pin 8 V+ — Positive supply connection

Tipik Uygulamalar

TLV2471CP için uygundur 6 uygulamas: Battery-Powered Sensor Conditioning, Industrial Transducer Interface, Portable Measurement Instrument, Low-Side Current Monitoring, Audio and Communication Buffering, Prototype and Repair Circuit.

📱

Battery-Powered Sensor Conditioning

The TLV2471CP fits low-power sensor interfaces because its rail-to-rail input and output stages operate close to the supply limits while consuming approximately 600 µA per channel. A 2.5 pA input bias current minimizes disturbance of high-impedance sensing elements, and the 2.8 MHz gain-bandwidth product supports moderate-frequency amplification and filtering. The device can be configured as a non-inverting or inverting amplifier around a precision reference. Design tradeoffs include confirming the input common-mode range during battery discharge and verifying output swing at the highest expected signal level.

🏭

Industrial Transducer Interface

The TLV2471CP provides a practical input stage for low-level industrial transducer signals because its 78 dB CMRR helps suppress common-mode noise and its CMOS input draws only about 2.5 pA of bias current. The 2.8 MHz gain-bandwidth product permits useful closed-loop bandwidth for many pressure, temperature, and position sensors without pushing the amplifier into excessive noise gain. The -40°C to +125°C operating range supports demanding industrial environments. Confirm the sensor output range, ground offsets, and isolation boundaries before connecting external wiring.

🖥️

Portable Measurement Instrument

The TLV2471CP suits portable measurement instruments that need accurate signal amplification with limited power consumption. Its approximately 600 µA per-channel current helps preserve battery life, while the 2.8 MHz gain-bandwidth product and 15 nV/√Hz input noise support sensitive acquisition stages. Rail-to-rail operation increases usable input range in compact dual-supply systems. Keep the layout short and quiet because high-impedance inputs can couple noise from nearby digital and switching circuitry. Stable feedback compensation should be checked for the selected noise gain.

⚡

Low-Side Current Monitoring

The TLV2471CP can amplify the small differential voltage produced by a low-side current shunt when the amplifier's common-mode input range accommodates the shunt voltage. Its 78 dB CMRR improves rejection of supply ripple and adjacent switching-node interference, while the low 2.5 pA bias current limits unintended current through high-value shunt networks. The 2.8 MHz gain-bandwidth product is suitable for many monitoring and control loops. The shunt resistance, amplifier offset, trace resistance, and thermal effects must be evaluated together for accurate measurement.

🌐

Audio and Communication Buffering

The TLV2471CP provides useful bandwidth for audio-frequency and low-speed communication signal buffering, with a 2.8 MHz gain-bandwidth product and rail-to-rail output capability. The high-drive CMOS architecture can drive typical high-impedance buffer stages more effectively than a general-purpose low-power amplifier. The approximately 600 µA per-channel consumption supports portable equipment, and 15 nV/√Hz input noise is favorable for low-level signals. Check capacitive-load stability, output-current limits, and the available output-voltage headroom when driving filters or downstream stages.

🔧

Prototype and Repair Circuit

The 8-pin PDIP package makes the TLV2471CP convenient for prototypes, educational circuits, and repair assemblies where through-hole soldering is preferred. It retains the same practical rail-to-rail behavior and 2.8 MHz gain-bandwidth product expected from the TLV2471 family. Through-hole accessibility also simplifies inspection and rework compared with a fine-pitch surface-mount package. Engineers should still follow the manufacturer pin-description table, preserve adequate input and output grounding, and observe the published common-mode and supply limits rather than assuming universal rail-to-rail operation.

Önerilen Ürünler Özeti

TLV2471IP Same-family single-channel operational amplifier Kullanıldığı Yer: Battery-Powered Sensor Conditioning, Industrial Transducer Interface, Low-Side Current Monitoring, Prototype and Repair Circuit TLV2471AIP Same-family PDIP alternative Kullanıldığı Yer: Battery-Powered Sensor Conditioning, Portable Measurement Instrument, Low-Side Current Monitoring, Audio and Communication Buffering, Prototype and Repair Circuit TLV2471CPE4 Same-family PDIP option for grade review Kullanıldığı Yer: Industrial Transducer Interface, Portable Measurement Instrument, Audio and Communication Buffering
What are the key specifications of TLV2471CP that engineers should know?
The TLV2471CP is a single-channel, 6 V rail-to-rail input and output CMOS operational amplifier with a 2.8 MHz gain-bandwidth product. According to the Texas Instruments product page and manufacturer datasheet, it provides 78 dB CMRR, 15 nV/√Hz input-voltage-noise density, approximately 2.5 pA input bias current, and about 600 µA supply current per channel. It is offered in a through-hole 8-pin PDIP package and is specified from -40°C to +125°C.
Where to buy TLV2471CP online?
The TLV2471CP can be requested through the Request a Quote form on this page. The request should identify the exact TLV2471CP ordering code, required quantity, and delivery destination so procurement can confirm commercial availability and assembly requirements. The component is an 8-pin PDIP package and may also be requested in larger quantities for production planning. Request current lot availability rather than relying on an unconfirmed stock quantity.
What is the price of TLV2471CP?
Use the Request a Quote form on this page for the current TLV2471CP price and volume breaks. Commercial pricing can vary with order quantity, package quantity, delivery location, and market conditions, so a quotation provides the most relevant purchasing basis. The quote request should specify the required quantity, target date, and shipment destination for an accurate response.
What is the lead time for TLV2471CP?
Request the current lead time through the Request a Quote form on this page. Lead time depends on quantity, production scheduling, and the requested delivery date. For prototype quantities, identify whether the order must arrive before a board-spin schedule; for production quantities, include the required build date and acceptable delivery window so procurement can confirm the appropriate supply plan.
Is TLV2471CP in stock?
Confirm current TLV2471CP availability by submitting the Request a Quote form on this page. Include the required quantity and target delivery date so the purchasing team can verify current lot status. Because inventory changes rapidly, an affirmative answer should be tied to an accepted quotation and assigned lot rather than a general marketplace stock indication.
Where can I download the TLV2471CP datasheet PDF?
The official TLV2471 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/tlv2471. According to the manufacturer document, the family includes rail-to-rail input and output operational amplifiers and provides ordering, pinout, electrical-characteristic, and application information. Use the pin-description table and package drawings in that document when assigning PCB connections.
Where can I find the TLV2471CP pinout?
The TLV2471CP pinout is shown in the Texas Instruments TLV2471 manufacturer datasheet at https://www.ti.com/lit/gpn/tlv2471. The 8-pin PDIP connection list identifies pin 1 as OUT, pins 2 and 3 as IN− and IN+, pin 4 as V−, and pin 8 as V+. Use the package drawing and pin-description table together before assigning the remaining connections.
What can replace TLV2471CP?
TLV2471AIP and TLV2471CPE4 are same-family, 8-pin PDIP options to evaluate when replacing the TLV2471CP. Their published family characteristics retain a 2.8 MHz gain-bandwidth product and approximately 600 µA per channel, but the exact grade and temperature qualifications must be checked for the installed design. The TLV2471IP is another family ordering option, although its exact suffix-specific conditions should also be confirmed.
Is TLV2471CP the same as TLV2471AIP?
The TLV2471CP and TLV2471AIP belong to the same TLV2471 operational-amplifier family and use the same 8-pin PDIP footprint, with a published gain-bandwidth product of 2.8 MHz. They are not necessarily identical in grade or qualification, so suitability depends on the specific operating-temperature, automotive, and production requirements of the design. Compare the complete ordering information before treating either part as a universal substitute.
TLV2471CP vs TLV2471AIP - which is better for a precision analog circuit?
The TLV2471CP and TLV2471AIP both use the 8-pin PDIP footprint and share the TLV2471 family's 2.8 MHz gain-bandwidth and approximately 600 µA per-channel operating point. Choose the TLV2471CP when its specified grade matches the production requirements; consider TLV2471AIP only after checking its complete electrical limits and qualification status. Neither choice should be based solely on the 2.8 MHz bandwidth, because offset voltage, bias current, output swing, and stability determine precision performance.
What is the difference between TLV2471CP and TLV2471CPE4?
The TLV2471CP and TLV2471CPE4 are 8-pin PDIP members of the TLV2471 family, and both share the 2.8 MHz gain-bandwidth product described for the family. Their suffix-specific grade or temperature treatment can differ, so the exact ordering table and electrical characteristics must be compared before substitution. Both preserve the same through-hole footprint, making them candidates for a board-level review rather than a footprint redesign.
When should I choose TLV2471CP over TLV2471AIP?
Choose TLV2471CP when its 8-pin PDIP package and specified grade satisfy the design's operating-temperature, qualification, and sourcing requirements. Consider TLV2471AIP when its detailed ordering information provides a better fit for the production program while retaining the same family performance and footprint. The decision should also account for measured noise, output-swing requirements, and availability rather than using package similarity alone.
Is TLV2471CP suitable for battery-powered sensor interfaces?
The TLV2471CP is suitable for many battery-powered sensor interfaces because it combines rail-to-rail input and output operation with approximately 600 µA supply current per channel. Its 2.5 pA input bias current reduces loading on high-impedance sensors, while the 2.8 MHz gain-bandwidth product supports moderate-bandwidth conditioning. Confirm the complete input and output common-mode limits and verify the resulting battery-current budget in the final system.
Can TLV2471CP replace TLV2471IP without changing the PCB?
The TLV2471CP can fit the same 8-pin PDIP footprint as the TLV2471IP, but a footprint-compatible change still requires an electrical qualification. According to the Texas Instruments family documentation, both provide a 2.8 MHz gain-bandwidth product; review input bias current, common-mode rejection, output swing, supply current, temperature grade, and any orderable suffix differences before approving the substitution.
What are the main design considerations for a TLV2471CP precision amplifier circuit?
The main TLV2471CP design considerations are input common-mode range, output swing, noise gain, stability, and thermal operating margin. Place the feedback components close to the device, keep the output path short, and provide local supply bypassing to control high-frequency behavior. For high-impedance sources, verify that PCB leakage and contamination remain below the amplifier's very low input-bias-current contribution.

Mühendislik referans verileri: TLV2471CP — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the TLV2471CP for a low-voltage, single-channel precision amplifier design that specifically uses an 8-pin PDIP footprint and benefits from 2.8 MHz gain-bandwidth product, 78 dB CMRR, 15 nV/√Hz input noise, and approximately 2.5 pA input bias current. Consider TLV2471AIP when its suffix-specific grade and qualification better align with the production requirements while retaining the same package and core family performance. Consider TLV2471CPE4 when its temperature treatment is appropriate and the exact ordering conditions are confirmed. TLV2471IP is another family option that may simplify standardization. For all three candidates, verify input bias current, common-mode rejection, output swing, offset behavior, temperature grade, and stability at the intended noise gain before releasing a production substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün TLV2471AIP TLV2471CPE4 TLV2471IP
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Configuration Single amplifier Single amplifier Single amplifier Single amplifier
Maximum Supply Voltage 6 V 6 V 6 V 6 V
Gain-Bandwidth Product 2.8 MHz 2.8 MHz 2.8 MHz 2.8 MHz
Supply Current per Channel 600 µA 600 µA 600 µA 600 µA
Rail-to-Rail Input and Output Yes Yes Yes Yes

Ana Farklılayıcılar

  • Maintains the family's 2.8 MHz gain-bandwidth product in an 8-pin PDIP package (karşılaştırma:TLV2471AIP)
  • Combines 78 dB CMRR with a 2.5 pA input bias current (karşılaştırma:TLV2471CPE4)
  • Rail-to-rail input and output operation at a 6 V maximum supply (karşılaştırma:TLV2471IP)

Tasarım Notları

Place the feedback resistors and compensation components directly beside pins 1, 2, and 3, and keep the input traces short and away from switching nodes. Because the TLV2471CP has approximately 2.5 pA input bias current, high-impedance designs can be influenced by PCB contamination and leakage. Use a clean board surface and guard or shield the non-inverting input when the source impedance is sufficiently high.

Configure the amplifier for a stable noise gain according to the manufacturer's recommended application circuits. The 2.8 MHz gain-bandwidth product provides useful closed-loop bandwidth, but an excessively high noise gain can reduce stability and increase output-noise amplification. Check the complete feedback network, source impedance, and capacitive loading rather than relying on nominal gain-bandwidth alone.

Do not assume that rail-to-rail input and output operation permits arbitrary input or output levels. Verify the input common-mode range under supply tolerance, temperature, and startup conditions, and confirm that the required output swing remains inside the linear-output region. The 6 V maximum supply rating is also an absolute device limit, not the recommended operating point.

Estimated: at a 5 V supply and approximately 600 µA per-channel current, the TLV2471CP consumes about 3 mW per amplifier, calculated as 5 V multiplied by 600 µA. This estimate excludes output-current dissipation and load-dependent changes in supply current. Keep supply bypassing close to pins 4 and 8 and verify total system consumption when estimating battery life.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance attributes were not explicitly stated in the available manufacturer or distributor information and must be confirmed from the applicable Texas Instruments product documentation before procurement.

Veri doğrulanma tarihi: 2026-11-15 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

TLV2471CP datasheet TLV2471CP pinout TLV2471CP datasheet pdf TLV2471CP specifications TLV2471CP 8-PDIP TLV2471CP application circuit TLV2471CP equivalent TLV2471CP replacement TLV2471CP cross reference TLV2471CP vs TLV2471AIP TLV2471CP footprint Texas Instruments TLV2471CP TLV2471CP price TLV2471CP stock TLV2471CP rail-to-rail op amp

İlgili Bileşenler ve Terimler

Texas Instruments TLV2471CP TLV2471 TLV2471AIP TLV2471CPE4 TLV2471IP operational amplifier precision amplifier CMOS operational amplifier LiNCMOS rail-to-rail input rail-to-rail output gain-bandwidth product common-mode rejection ratio CMRR input voltage noise density input bias current 8-pin PDIP through-hole package precision signal conditioning battery-powered sensor interface low-side current monitoring industrial transducer interface power supply rejection 2.8 MHz
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle