Texas Instruments

TLV2473CD - Dual 2.8MHz RRIO Op Amp | Texas Instruments

MPN: TLV2473CD ✓ نشط
2.8 V to 6 V Vdss Approximately 600 uA Id 14-pin SOIC (D) Package
الحد الأدنى للطلب: 1 |

TLV2473CD نظرة عامة

The Texas Instruments TLV2473CD is a dual, 6 V, 2.8 MHz rail-to-rail input/output operational amplifier with shutdown, offered in a 14-pin SOIC package. It combines a 2.8 MHz gain-bandwidth product with approximately 600 uA of supply current per amplifier and a 1.5 V/us slew rate, making it suitable for compact, low-power signal-conditioning circuits. Each channel can operate from a single 2.8 V to 6 V supply.

An operational amplifier is an amplifier IC that uses negative feedback to control gain and accurately amplify small input signals. The TLV2473 belongs to the CMOS operational-amplifier hierarchy, which includes rail-to-rail input/output amplifiers, low-power amplifiers, and general-purpose precision amplifiers. Rail-to-rail input operation supports signals near the supply rails, while rail-to-rail output capability allows the output to approach either rail under suitable load conditions.

The family provides rail-to-rail input and output stages, a 2.8 MHz gain-bandwidth product, approximately 600 uA of supply current per channel, and a shutdown function for reducing power consumption when the amplifier is not needed. These characteristics support applications where a conventional amplifier would consume excessive power or lack useful bandwidth for filtering and signal-conditioning tasks. The dual configuration also reduces board area by integrating two amplifier channels in one package.

The CMOS architecture targets a favorable combination of low power and moderate dynamic performance. A 2.8 MHz gain-bandwidth product is suitable for low-frequency active filters, sensor conditioning, audio preamplification, and general signal amplification. The approximately 600 uA-per-channel supply current helps reduce total system power in battery-operated or multi-channel equipment. Designers must still verify output swing, input range, noise, settling behavior, and shutdown logic against the operating conditions of their specific circuit.

Typical uses include industrial sensor interfaces, portable measurement instruments, low-frequency filter stages, audio signal chains, power-sequencing control, and general-purpose analog buffers. The shutdown pin can disable the amplifiers to reduce power use when a subsystem is inactive. Because both channels share the same device supply and shutdown control, applications requiring independently controlled channels may need separate devices.

For PCB design, place input, output, supply, and bypass connections close to their corresponding pins. Use a short ground return and decouple the supply near the package to reduce supply-noise coupling into the signal path. The common-mode input range, output load capability, and stability requirements should be checked directly in the manufacturer datasheet for the selected supply voltage and gain configuration.

This product page combines the manufacturer’s device description, ordering information, package details, and technical guidance with practical application, comparison, and design information. It helps engineers distinguish the TLV2473CD from nearby dual RRIO amplifier options while emphasizing shutdown capability, 2.8 MHz bandwidth, low supply current, and the 14-pin SOIC footprint.

بدائل مباشرة لـ TLV2473CD — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

TLV2473AIDR

✅ بديل مباشر
📦 14-pin SOIC (D)
Same 14-pin SOIC footprint and function; listed cross-reference identifies consistent performance, terminals, and package with no rated electrical difference.

📋 بديل مرجعي (غير موجود في الكتالوج)

TLV2473IDR

✅ بديل مباشر
📦 14-pin SOIC (D)
Same TLV2473 family, 14-pin SOIC footprint, 2.8 MHz bandwidth class, and shutdown architecture; suffix-level ordering details require comparison.

📋 بديل مرجعي (غير موجود في الكتالوج)

TLV2473ID

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 14-pin SOIC (D)
Same TLV2473 dual RRIO family and 14-pin SOIC footprint; nominal performance is unchanged while ordering suffix details differ by approximately 0%.

📋 بديل مرجعي (غير موجود في الكتالوج)

TLV2472IDR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 14-pin SOIC (D)
Same dual 14-pin SOIC family and approximately 600 uA-per-channel low-power architecture, but the nominal gain-bandwidth product is lower by approximately 21%.

📋 بديل مرجعي (غير موجود في الكتالوج)

TLV2471IDR

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 14-pin SOIC (D)
Same dual low-power RRIO family in a 14-pin SOIC footprint, with nominal gain-bandwidth product lower by approximately 36%.

📋 بديل مرجعي (غير موجود في الكتالوج)

TLV2473CD الحدود القصوى والخصائص الكهربائية

Number of Amplifier Channels 2 channels
Supply Voltage Range 2.8 V to 6 V
Gain-Bandwidth Product 2.8 MHz
Supply Current per Channel Approximately 600 uA
Slew Rate 1.5 V/us
Shutdown Function Yes
نطاق درجة حرارة التشغيل 0 C to +70 C
العلبة 14-pin SOIC (D)
نوع التركيب Surface mount

تكوين أطراف TLV2473CD

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
دبوس 1 OUTA — Amplifier A output
دبوس 2 IN A- — Inverting input for amplifier A
دبوس 3 IN A+ — Noninverting input for amplifier A
دبوس 4 V- — Negative supply connection
دبوس 5 SHUTDOWN — Shutdown control
دبوس 6 IN B+ — Noninverting input for amplifier B
دبوس 7 IN B- — Inverting input for amplifier B
دبوس 8 OUTB — Amplifier B output
دبوس 9 V+ — Positive supply connection
دبوس 10 NC — Not connected
دبوس 11 NC — Not connected
دبوس 12 NC — Not connected
دبوس 13 NC — Not connected
دبوس 14 NC — Not connected

التطبيقات النموذجية

TLV2473CD مناسب لـ 6 التطبيقs: Industrial Sensor Signal Conditioning, Portable Measurement Instrumentation, Low-Frequency Active Filtering, Audio Preamplification, Power-Sequenced Analog Control, General-Purpose Analog Buffering.

🏭

Industrial Sensor Signal Conditioning

The TLV2473CD suits low-power sensor-conditioning stages that require amplification close to the source. Its dual 2.8 MHz channels can form cascaded gain stages or independent channels for a sensor and a reference signal, while approximately 600 uA of supply current per channel limits the power burden. Rail-to-rail input operation is useful when sensor outputs approach the supply rails. Designers must still check input bias current, offset voltage, common-mode limits, and output drive against the sensor impedance and operating temperature.

📱

Portable Measurement Instrumentation

The TLV2473CD fits battery-powered instruments where amplifier power can materially affect operating time. The dual amplifier shares one 14-pin SOIC package, while its approximately 600 uA-per-channel supply current supports low-energy acquisition paths. A 2.8 MHz gain-bandwidth product is ample for many sensor, buffer, and active-filter stages operating below hundreds of kilohertz. The shutdown function is especially useful during idle measurement intervals, although its electrical timing should be confirmed before sequencing sensitive loads.

🔧

Low-Frequency Active Filtering

The TLV2473CD can implement low-frequency active filters using either channel independently. Its 2.8 MHz gain-bandwidth product provides more than enough loop bandwidth for many audio-band, control, or sensor-filter applications, and the 1.5 V/us slew rate helps preserve large-signal behavior. The dual arrangement allows a two-pole or higher-order filter in one package. Component tolerances, noise, output loading, and stability must be evaluated for the selected topology and closed-loop gain.

🎧

Audio Preamplification

The TLV2473CD is suitable for line-level audio preamplification when the design operates within the amplifier’s bandwidth and output-drive limits. Rail-to-rail input and output stages support signals near the supply rails, while the 2.8 MHz gain-bandwidth product comfortably covers conventional audio-band amplification. The dual package can handle two channels for stereo or provide gain and buffering stages in a mono circuit. Headroom, slew rate, distortion, noise, and shutdown behavior should be checked at the intended signal level and load.

⚡

Power-Sequenced Analog Control

The TLV2473CD shutdown function allows an analog subsystem to be disabled when it is not required, helping reduce current consumption in mixed-signal systems. Its dual channels can control or buffer two related analog nodes, provided both channels are intended to share the same shutdown state. The 2.8 V to 6 V supply range permits use in several low-voltage systems. Firmware and hardware sequencing should account for shutdown thresholds, startup timing, and the time required for outputs to become valid.

🖥️

General-Purpose Analog Buffering

The TLV2473CD can buffer high-impedance sources or drive downstream circuitry when a unity-gain buffer provides useful isolation. Its 2.8 MHz bandwidth supports moderate-frequency signals, and the dual configuration provides two independent buffer paths in one package. Rail-to-rail operation is advantageous in compact systems where the signal can occupy much of the available supply range. Before loading the output, verify capacitive-drive limits, output-current capability, settling time, and stability with the chosen feedback network.

ملخص المنتجات الموصى بها

TLV2473AIDR Closely related dual rail-to-rail amplifier يُستخدم في: Industrial Sensor Signal Conditioning, Portable Measurement Instrumentation, Low-Frequency Active Filtering, Audio Preamplification, Power-Sequenced Analog Control, General-Purpose Analog Buffering OPA828ID Texas Instruments يُستخدم في: Industrial Sensor Signal Conditioning, Audio Preamplification TLV2473IDR Related low-power dual amplifier ordering option يُستخدم في: Portable Measurement Instrumentation, Power-Sequenced Analog Control TLV2472IDR Related family member for lower-bandwidth filters يُستخدم في: Low-Frequency Active Filtering, General-Purpose Analog Buffering
What is the TLV2473CD?
The TLV2473CD is a dual, 2.8 MHz, rail-to-rail input/output CMOS operational amplifier with shutdown in a 14-pin SOIC package. According to the Texas Instruments product page, it operates from 2.8 V to 6 V and consumes approximately 600 uA per channel. The two integrated channels suit low-power filtering, sensor conditioning, buffering, and general signal-amplification applications.
What are the key specifications of TLV2473CD that engineers should know?
The TLV2473CD combines two amplifier channels, a 2.8 MHz gain-bandwidth product, approximately 600 uA of supply current per channel, a 1.5 V/us slew rate, and rail-to-rail input/output operation. Its supply range is 2.8 V to 6 V, and the TLV2473CD ordering option uses a 14-pin SOIC package rated from 0 C to +70 C, according to Texas Instruments.
What is the operating voltage of TLV2473CD?
The TLV2473CD operates from 2.8 V to 6 V. According to the Texas Instruments TLV2473 product page, this range supports both low-voltage portable systems and conventional 5 V analog circuits. Designers should maintain the supply limits while considering output swing, input common-mode range, and the dissipation associated with the selected output voltage.
Does TLV2473CD support shutdown?
Yes, the TLV2473CD includes a shutdown function, as identified by Texas Instruments in the family description. Shutdown is useful for reducing power consumption when the amplifier is not active, particularly in portable and intermittently operated equipment. The precise shutdown thresholds, timing, and control-pin behavior should be taken from the manufacturer datasheet when defining the system power sequence.
Is the TLV2473CD input and output rail-to-rail?
Yes, the TLV2473CD is specified as a rail-to-rail input/output operational amplifier. According to the Texas Instruments product page, this architecture supports input signals near the supply limits and provides rail-to-rail output behavior. Exact input and output voltage boundaries depend on supply voltage, load, and operating conditions, so circuit calculations must use the datasheet limits.
Where can I download the TLV2473CD datasheet PDF?
The official TLV2473 documentation is available through the Texas Instruments product page at https://www.ti.com/product/TLV2473. That page contains the TLV2473 family datasheet, ordering information, parameters, and package details. Use the manufacturer datasheet for the authoritative pin description, recommended operating conditions, electrical characteristics, and application guidance.
Where can I find the TLV2473CD pinout?
The TLV2473CD pinout is shown in the manufacturer datasheet on the Texas Instruments TLV2473 product page. The device uses a 14-pin SOIC package, and its two amplifier channels, supply pins, shutdown connection, and no-connect positions must be assigned exactly as shown in the pin-description table. Review that table before assigning PCB tracks.
Where to buy TLV2473CD online?
The TLV2473CD can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit availability, quantity pricing, lead time, and order handling. Because availability and commercial terms can change, request the present quotation for the exact 14-pin SOIC ordering code rather than relying on a historical catalog record.
What is the price of TLV2473CD?
Current pricing for TLV2473CD is not stated in a static product paragraph because commercial terms may change. Use the Request a Quote form on this page to obtain the current unit and volume pricing for the exact TLV2473CD ordering code, including availability and expected lead time. The request should identify the required quantity and intended shipment destination.
What is the lead time for TLV2473CD?
Lead time depends on current factory and distribution inventory, order quantity, and shipment destination. Use the Request a Quote form on this page to request the current lead time for TLV2473CD. When requesting a quotation, state whether you need production quantities, prototyping quantities, or scheduled deliveries so the response can reflect the appropriate supply plan.
Is TLV2473CD in stock?
Current inventory should be confirmed through the Request a Quote form on this page because stock changes with production activity and customer demand. Provide the required quantity, delivery location, and target date in the request. The manufacturer lists the TLV2473 family on its product page, but a current availability commitment should come from the quotation process.
TLV2473CD vs TLV2473AIDR - which is better for a low-power design?
TLV2473AIDR is the closest listed drop-in option for the TLV2473CD, and the cross-reference information identifies it as a complete replacement with consistent performance, terminals, and package. Both use the 14-pin SOIC format and belong to the dual low-power RRIO family. Review the manufacturer ordering table to confirm temperature grade and suffix requirements for the finished product.
When should I choose TLV2473CD over TLV2473IDR?
Choose TLV2473CD when the design calls for a dual 2.8 MHz RRIO amplifier in the 14-pin SOIC package and an operating range of 0 C to +70 C. TLV2473IDR is a closely related ordering option, but suffix and grade choices should follow the manufacturer ordering information. The final selection must account for package, temperature, production configuration, and lifecycle needs.
Is TLV2473CD suitable for sensor conditioning and filtering?
Yes, the TLV2473CD is suitable for sensor conditioning and low-frequency filtering when its 2.8 MHz bandwidth and approximately 600 uA-per-channel current meet the circuit requirements. Its dual-channel configuration can implement a complete filter or two independent gain stages. Check input bias current, offset voltage, noise, common-mode range, and output drive against the sensor characteristics.
What can replace TLV2473CD?
TLV2473AIDR is a directly identified drop-in replacement for TLV2473CD, while TLV2473IDR and other TLV247-family ordering options provide closely related 14-pin alternatives. A valid replacement must preserve the 14-pin SOIC footprint, dual-channel arrangement, supply range, shutdown function, bandwidth, and required temperature grade. Verify each candidate against the manufacturer datasheet before approving it for production.
Is TLV2473CD the same as TLV2473AIDR?
TLV2473AIDR is identified as a complete replacement for TLV2473CD because the devices have consistent performance characteristics, terminals, and packages. Both are 14-pin SOIC dual RRIO operational amplifiers in the TLV2473 family. Ordering suffixes can still encode temperature, packaging, or production details, so compare the complete ordering codes before substitution.

بيانات مرجعية هندسية لـ TLV2473CD — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose TLV2473CD for a dual-channel, low-power design that needs 2.8 MHz gain-bandwidth product, rail-to-rail input/output operation, shutdown capability, and a 14-pin SOIC footprint. TLV2473AIDR is the preferred substitute when a web-listed, package-compatible direct replacement is required, although ordering and temperature details should still be checked. TLV2473IDR and TLV2473ID are closely related same-family ordering options suitable when their manufacturer suffix definitions satisfy production requirements. Use TLV2472IDR when its lower bandwidth is acceptable and broader loop-gain margin is useful. Use TLV2471IDR only when its reduced bandwidth still meets the signal path requirements. For designs needing substantially more bandwidth, lower noise, higher output drive, or different compliance qualifications, evaluate another amplifier family rather than treating these low-power alternatives as automatically interchangeable.

المقارنة مع البدائل

المعامل هذا المنتج TLV2473AIDR TLV2473IDR TLV2473ID TLV2472IDR TLV2471IDR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D) 14-pin SOIC (D)
Number of Channels 2 2 2 2 2 2

أبرز الفروقات

  • Closest web-identified direct replacement (مقابلTLV2473AIDR)
  • Provides dual-channel integration in a compact SOIC (مقابلOPA828ID)
  • Higher nominal bandwidth than lower-bandwidth family alternatives (مقابلTLV2472IDR)

ملاحظات التصميم

Place a supply bypass capacitor immediately beside the V+ and V- pins and connect it to a low-impedance ground plane. Because the TLV2473CD consumes approximately 600 uA per channel, supply noise and ground bounce can become significant relative to the signal being amplified. Use short, symmetric routing and avoid routing output currents through the input-reference ground path.

Keep the two input networks, feedback components, and output traces as compact as practical. Place input and feedback resistors close to the corresponding input pins to minimize parasitic capacitance and susceptibility to interference. Do not place long signal traces between the amplifier pins and their associated passive components, particularly around high-impedance sources where input bias current can create measurable voltage error.

Confirm output stability and drive capability for the intended load, including cable capacitance, sensor capacitance, and the input capacitance of the following stage. The 2.8 MHz gain-bandwidth product is suitable for many moderate-frequency applications, but closed-loop gain and load can affect usable bandwidth. Add an isolation resistor near the output when driving difficult capacitive loads and verify the resulting response on hardware.

Do not assume the shutdown control can tolerate arbitrary logic levels or that both channels can be disabled independently. Review the manufacturer pin description and timing characteristics, then define a startup sequence that keeps downstream nodes in a defined state. Also account for the 0 C to +70 C ordering range of the TLV2473CD when planning industrial or outdoor equipment.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The product page and ordering information identify the device and package, but no explicit environmental or material-compliance declarations are present in the cited records. The standard commercial 0 C to +70 C TLV2473CD option is not presented as an automotive-qualified device.

تم التحقق من البيانات في: 2026-11-19 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

TLV2473CD datasheet TLV2473CD datasheet pdf TLV2473CD pinout TLV2473CD specifications Texas Instruments TLV2473CD TLV2473CD 2.8 MHz TLV2473CD 14 pin SOIC TLV2473CD rail to rail op amp TLV2473CD equivalent TLV2473CD replacement TLV2473CD vs TLV2473AIDR TLV2473CD price TLV2473CD stock TLV2473CD application circuit TLV2473CD shutdown amplifier

المكونات والمصطلحات ذات الصلة

Texas Instruments TLV2473CD TLV2473AIDR TLV2473IDR TLV2473ID TLV2472IDR TLV2471IDR OPA828ID operational amplifier CMOS operational amplifier rail-to-rail input/output amplifier dual amplifier low-power amplifier analog signal conditioning active filter sensor interface gain-bandwidth product slew rate shutdown control SOIC-14 QFN family surface mount SMD power management IC semiconductor
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر