Texas Instruments

TLV2781ID - 3.6V, 8MHz RRIO Op Amp | Texas Instruments

MPN: TLV2781ID ✓ نشط
3.6 V Vdss 8-pin SOIC (D) Package
الحد الأدنى للطلب: 1 |

TLV2781ID نظرة عامة

The Texas Instruments TLV2781ID is a single-rail operational amplifier designed for low-voltage, high-speed signal conditioning, featuring a 3.6 V supply rating, 8 MHz gain-bandwidth product, and rail-to-rail input/output operation. The device is offered in an 8-pin SOIC package and operates across the extended industrial temperature range from -40°C to 125°C.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2781 belongs to the voltage-feedback operational-amplifier hierarchy, where rail-to-rail input and output capability allows the amplifier to operate close to the supply rails. This is particularly useful in low-voltage systems because conventional input and output stages may not cover the full available signal range.

The TLV2781ID's principal characteristics include one amplifier circuit per package, an 8 MHz gain-bandwidth product, and a 3.6 V maximum specified supply voltage. Its rail-to-rail input capability is useful when sensor outputs or low-level signals move close to ground. Rail-to-rail output improves usable output swing in compact 1.8 V-class systems, although the exact input offset, output-current, noise, and stability limits should be taken from the manufacturer datasheet for the intended operating conditions.

Texas Instruments describes the TLV2781 family as high-speed, 1.8 V-capable rail-to-rail input/output operational amplifiers. The 8 MHz bandwidth makes the device suitable for signal paths that require more response than a general-purpose low-speed amplifier but do not require the bandwidth of a high-speed video amplifier. Its extended-temperature rating supports industrial equipment, instrumentation, portable measurement systems, and control loops operating across broad ambient conditions.

Typical uses include low-voltage sensor conditioning, current-loop receivers, ADC input drivers, transducers, battery-powered instruments, and general analog signal-processing blocks. The 8-pin SOIC package is also practical for prototypes and through-hole industrial boards where a small surface-mount footprint is desirable. Designers should preserve output-current margin, account for capacitive loading, and select external compensation or isolation when driving unusual loads.

The principal design consideration is power-rail compatibility. The device supports low-voltage operation, but its 3.6 V rating is a maximum, not a recommendation to operate at that voltage without checking every datasheet limit. Decoupling, grounding, input common-mode range, output swing, and stability requirements must all be evaluated for the actual circuit.

This page consolidates the manufacturer specifications, ordering information, package details, pricing evidence, and engineering guidance for the TLV2781ID. It also identifies where replacement decisions require additional qualification, particularly for shutdown behavior, supply tolerance, bandwidth, rail-to-rail performance, and exact pin compatibility.

بدائل مباشرة لـ TLV2781ID — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

لا تتوفر بدائل متوافقة تمامًا لهذا المنتج.

اطلب بدائل

TLV2781ID الحدود القصوى والخصائص الكهربائية

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Maximum Supply Voltage 3.6 V
Minimum Operating Supply Voltage 1.8 V
Gain-Bandwidth Product 8 MHz
Input Type Rail-to-rail
نوع الخرج Rail-to-rail
نطاق درجة حرارة التشغيل -40°C to 125°C
العلبة 8-pin SOIC (D)
نوع التركيب Surface mount
Manufacturer Texas Instruments
Product Family TLV278x
Rail-to-Rail Input and Output Yes

دليل تكوين أطراف TLV2781ID 8-pin soic (d)

تكوين الأطراف لـ TLV2781ID (حزمة 8-pin soic (d)). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة 8-pin soic (d) لـ TLV2781ID

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TLV2781ID.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TLV2781ID مناسب لـ 6 التطبيقs: Low-Voltage Sensor Conditioning, Battery-Powered Instrumentation, Industrial ADC Input Driver, Current-Loop Receiver, Transducer Signal Amplification, Portable Test and Measurement.

🧩

Low-Voltage Sensor Conditioning

The TLV2781ID fits sensor-amplifier stages that operate from a 1.8 V to 3.6 V rail and need signal swing close to the supply limits. Its rail-to-rail input capability supports low-level sensor signals near ground, while the 8 MHz gain-bandwidth product provides useful bandwidth for moderate-frequency conditioning. Place the amplifier close to the sensor or protection network, provide normal supply decoupling, and confirm that the input common-mode range covers the full sensor output range. For high-gain configurations, verify noise, offset, bias-current effects, and stability against the manufacturer specifications.

📱

Battery-Powered Instrumentation

The TLV2781ID is appropriate for compact, battery-powered instruments that limit both supply voltage and signal bandwidth. Its 1.8 V minimum operating supply supports low-energy designs, while rail-to-rail input/output operation improves usable signal range without requiring a bipolar supply. The 8 MHz bandwidth is suitable for many precision measurement front ends rather than high-speed waveform systems. Check the amplifier's quiescent current for battery-budget calculations, confirm output-current demand, and use the manufacturer's recommended bypass capacitors close to the supply pins.

🏭

Industrial ADC Input Driver

The TLV2781ID can serve as the analog front-end stage for a low-voltage ADC in industrial control equipment. Rail-to-rail output capability helps preserve signal range between the transducer stage and converter, while 8 MHz bandwidth is generally ample for moderate-rate sampling systems. The key design checks are ADC settling requirements, kickback from the sampling input, and capacitive loading at the amplifier output. Use a small isolation resistor if required, avoid excessive gain-bandwidth product combinations that destabilize the amplifier, and verify operation across the full -40°C to 125°C temperature range.

⚡

Current-Loop Receiver

The TLV2781ID can be used in a low-voltage current-loop receiver when the loop signal requires a modest bandwidth and rail-to-rail output swing. Its 1.8 V minimum supply suits compact process-control electronics, while the 8 MHz gain-bandwidth product provides more closed-loop capability than a slow precision amplifier. The design must account for the loop's common-mode voltage, input protection, output drive, and the shunt or network forming the transimpedance element. Confirm that the selected operating point remains within the amplifier's input common-mode range.

🔧

Transducer Signal Amplification

The TLV2781ID is useful for gain and impedance conversion in bridge, strain-gauge, and resistive-transducer front ends operating at low supply voltages. Rail-to-rail input behavior helps preserve small signals near ground, and the 8 MHz bandwidth supports moderate-bandwidth sensor conditioning. However, the amplifier's offset, bias current, noise, and input capacitance can directly influence measurement accuracy. Keep input traces short, use guarded grounding where appropriate, and derive the passive network values from the transducer resistance and required closed-loop gain rather than treating the 8 MHz figure as a universal settling specification.

🖥️

Portable Test and Measurement

The TLV2781ID supports portable measurement equipment that combines low supply voltage, rail-to-rail signal access, and moderate bandwidth. It can amplify probe, sensing, or divider signals without requiring a bipolar supply, and its -40°C to 125°C rating supports equipment intended for industrial environments. Use the rail-to-rail characteristics only after checking the exact output-swing limits because loading and output-current conditions affect headroom. PCB signal integrity is especially important near high-impedance sources, so keep feedback paths short and provide a stable reference or return path for the measured input.

ملخص المنتجات الموصى بها

TLV2781ID Texas Instruments يُستخدم في: Low-Voltage Sensor Conditioning, Battery-Powered Instrumentation, Industrial ADC Input Driver, Current-Loop Receiver, Transducer Signal Amplification, Portable Test and Measurement TLV2781IDR Same-device alternate orderable presentation يُستخدم في: Low-Voltage Sensor Conditioning, Battery-Powered Instrumentation, Industrial ADC Input Driver, Current-Loop Receiver, Transducer Signal Amplification, Portable Test and Measurement
What is the operating voltage of TLV2781ID?
The TLV2781ID operates from a minimum supply of 1.8 V and has a specified maximum supply voltage of 3.6 V. According to the Texas Instruments product page and manufacturer datasheet, the device is a single-supply, low-voltage operational amplifier. Designers should maintain the input and output voltages within the limits specified for their supply condition and should use the rail-to-rail input/output characteristics only within the stated common-mode and output-swing limits.
What are the key specifications of TLV2781ID that engineers should know?
The TLV2781ID is a single-amplifier, 8 MHz, rail-to-rail input/output operational amplifier with a 1.8 V minimum and 3.6 V maximum supply voltage. Texas Instruments identifies the device in an 8-pin SOIC package with an operating-temperature range of -40°C to 125°C. These characteristics position it for low-voltage industrial signal conditioning, sensor interfaces, ADC drivers, and compact instrumentation requiring rail-to-rail signal swing.
Where to download TLV2781ID datasheet PDF?
Download the TLV2781ID datasheet from the official Texas Instruments document link at https://www.ti.com/lit/gpn/TLV2781. The manufacturer product page is available at https://www.ti.com/product/TLV2781 and includes ordering, parameter, and quality information. Use the manufacturer's PDF for the complete electrical characteristics, pin descriptions, application information, and recommended operating conditions.
Where to find the TLV2781ID pinout?
Use the pin-description table in the Texas Instruments TLV2781 datasheet to assign PCB connections for the 8-pin SOIC package. The TLV2781ID product-page search result identifies an 8-pin SOIC (D) package, but the pin names are not reproduced in the accessible product summary. Confirm the package drawing, exposed-pad status, shutdown pin, supply pins, and input/output assignments directly against the manufacturer document before layout release.
Is TLV2781ID suitable for low-voltage sensor conditioning?
Yes, the TLV2781ID is suitable for low-voltage sensor conditioning because it operates from 1.8 V and provides rail-to-rail input and output capability. Its 8 MHz gain-bandwidth product also provides more bandwidth than a basic low-speed general-purpose amplifier. Confirm that the sensor output remains inside the device's input common-mode range and that the selected gain and capacitive load satisfy the stability requirements in the manufacturer datasheet.
Where to buy TLV2781ID online?
Use the Request a Quote form on this page to request TLV2781ID availability, lead time, and an order quote from XAIPART. The part is identified as an 8-pin SOIC operational amplifier from Texas Instruments, and the manufacturer's ordering page uses the exact TLV2781ID device designation. Specify the required quantity and any tube, tape-and-reel, or other packaging preference when submitting the request.
What is the price of TLV2781ID?
Current TLV2781ID pricing is generated through the Request a Quote form on this page rather than published as a static figure. The form allows buyers to request pricing for the exact MPN and required quantity while reflecting current commercial availability. Confirm lead time, minimum order quantity, and shipping terms as part of the quote request.
What is the lead time for TLV2781ID?
Request the current TLV2781ID lead time through the Request a Quote form on this page. Texas Instruments lists TLV2781ID as an orderable part with an 8-pin SOIC package, but production planning can change with demand and inventory. Provide the required quantity and packaging preference so the quote can reflect the appropriate supply commitment.
Is TLV2781ID in stock?
Request a stock and lead-time confirmation for TLV2781ID using the Request a Quote form on this page. The manufacturer product page provides ordering information for the exact 8-pin SOIC device, while transaction-level availability changes over time. The quote response should be used for the current quantity, delivery schedule, and accepted commercial terms.
TLV2781ID vs TLV2781IDR - which is better for a new design?
TLV2781ID and TLV2781IDR identify the same electrical device in different orderable package presentations, with TLV2781ID shown in an 8-pin SOIC (D) package and TLV2781IDR associated with the R packaging designation. The correct choice depends on the PCB assembly method rather than amplifier performance. Confirm the manufacturer's ordering table, reel dimensions, and assembly process before treating the two orderable MPNs as interchangeable.
When should I choose TLV2781ID over another 8-pin RRIO operational amplifier?
Choose the TLV2781ID when the design needs a single amplifier operating from 1.8 V to 3.6 V, an 8 MHz gain-bandwidth product, and rail-to-rail input/output behavior in an 8-pin SOIC package. Select a different amplifier when the design requires greater bandwidth, lower offset, lower noise, different supply limits, rail-to-rail input with non-rail-to-rail output, or a package other than SOIC.
Can another operational amplifier replace TLV2781ID without PCB changes?
A replacement should be selected only after confirming the exact 8-pin pinout, supply range, input common-mode range, output swing, shutdown behavior, bandwidth, and stability. The manufacturer family and cross-reference resources do not establish a validated drop-in replacement in the available product information. Treat any candidate as a redesign candidate until its pin functions and electrical limits have been checked against the TLV2781ID datasheet.
What can replace TLV2781ID?
No verified drop-in replacement is established for the TLV2781ID in the available manufacturer and cross-reference information. A candidate must use the same 8-pin SOIC footprint, preserve the required pin functions, and meet the 1.8 V minimum-supply, 3.6 V maximum-supply, rail-to-rail, and 8 MHz bandwidth requirements. Use the Request a Quote form when an approved second source must be identified for a production BOM.
Is TLV2781ID suitable for ADC input driving?
The TLV2781ID can be appropriate for low-voltage ADC input driving because it has an 8 MHz gain-bandwidth product and rail-to-rail output capability. The amplifier must still deliver the required settling behavior and output swing into the ADC's input network. Check the ADC acquisition time, capacitive loading, input range, and the manufacturer's recommended driving-circuit configuration.
What is the best cross-brand equivalent for TLV2781ID?
No cross-brand equivalent can be responsibly designated as a drop-in replacement from the available cross-reference results because they do not identify a specific pin-compatible amplifier with verified electrical performance. A valid equivalent should match the 8-pin SOIC pinout, 1.8 V minimum supply, 3.6 V maximum supply, rail-to-rail input/output behavior, and approximately 8 MHz bandwidth. Request engineering review through the Request a Quote form for an approved alternate.

بيانات مرجعية هندسية لـ TLV2781ID — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the TLV2781ID for low-voltage signal-conditioning designs that operate from 1.8 V to 3.6 V, require rail-to-rail input or output behavior, and need an 8 MHz gain-bandwidth product in an 8-pin SOIC package. It is well suited to industrial sensors, ADC interfaces, current-loop receivers, transducers, and portable instrumentation. Select a different amplifier when the circuit requires substantially more bandwidth, lower offset, lower noise, higher output current, wider supply range, or a package other than SOIC. A drop-in substitute must also preserve the exact pin functions, including shutdown behavior, and match the 1.8 V minimum-supply requirement. Because no verified alternate with complete pin and parameter confirmation was identified, treat an equivalent candidate as a qualified redesign rather than an automatic replacement.

المقارنة مع البدائل

المعامل هذا المنتج
Package 8-pin SOIC (D)
Brand Texas Instruments
Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 3.6 V
Gain-Bandwidth Product 8 MHz
Input Type Rail-to-rail
Output Type Rail-to-rail
Operating Temperature Range -40°C to 125°C

أبرز الفروقات

  • Supports low-voltage operation with rail-to-rail signal access (مقابلGeneric 5 V operational amplifiers)
  • Provides moderate bandwidth for compact analog systems (مقابلLow-speed precision operational amplifiers)
  • Combines industrial temperature operation with a single-amplifier SOIC format (مقابلCommercial-temperature single op amps)

ملاحظات التصميم

Place the power-supply bypass capacitor close to the positive supply and ground pins, and keep the feedback loop compact to minimize parasitic feedback. For sensitive sensor inputs, route the signal over a continuous ground plane and avoid running adjacent to switching-converter nodes. The 8 MHz bandwidth can amplify high-frequency noise and layout effects even when the intended closed-loop bandwidth is much lower, so input and feedback-trace discipline is important.

Do not assume that rail-to-rail input and output means unlimited input range, zero headroom, or unrestricted capacitive drive. Confirm the common-mode range at the actual supply voltage, inspect the output-swing curves under the intended load, and verify stability for the output capacitance and feedback network. The 3.6 V value is a maximum supply rating; operation close to that limit still requires compliance with every other electrical characteristic.

For source impedances near the amplifier's recommended operating range, minimize input capacitance and use a compact guard or isolation resistor if the following stage presents capacitive loading. The 8 MHz gain-bandwidth product can produce peaking or ringing when noise gain rises near crossover, especially with excessive closed-loop gain. Validate stability using the manufacturer's recommended values and the actual source, load, and feedback components before production release.

Design the supply rail below the 3.6 V maximum with margin for tolerances and transient overshoot. Although the amplifier operates from 1.8 V, low supply voltage reduces output headroom and may limit current into heavier loads. Verify the output-current requirement, output-swing margin, and bypass network using the manufacturer datasheet. Do not substitute a higher-voltage amplifier without checking its input common-mode range and output-swing behavior at the lower operating voltage.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Compliance status was not stated in the accessible product information. The manufacturer product and datasheet should be consulted for current environmental, material, and automotive qualification declarations.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

TLV2781ID datasheet TLV2781ID pinout TLV2781ID datasheet pdf TLV2781ID equivalent TLV2781ID replacement TLV2781ID cross reference TLV2781ID price TLV2781ID stock Texas Instruments TLV2781ID TLV2781ID footprint TLV2781ID application circuit TLV2781ID vs TLV2781IDR

المكونات والمصطلحات ذات الصلة

Texas Instruments TLV2781ID TLV2781IDR TLV2781 TLV278x Operational amplifier Voltage-feedback amplifier Rail-to-rail input Rail-to-rail output Gain-bandwidth product Low-dropout analog signal conditioning Semiconductor Integrated circuit Analog IC 8-pin SOIC SOIC package family Surface-mount package Low-voltage power supply Sensor conditioning ADC input driver Current-loop receiver Industrial instrumentation Portable instrumentation Input common-mode range Output swing
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر