TS982IDW - Dual 200mA R-R Op Amp | STMicroelectronics
MPN: TS982IDW ✓ نشطTS982IDW نظرة عامة
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TS982 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its dual architecture provides two amplifier channels in one package, reducing component count when a board needs matched signal conditioning, buffering, or gain stages.
The TS982's rail-to-rail output stage can approach the supply rails, increasing usable output-voltage range in low-voltage systems. Its ability to drive 200 mA makes it stronger than many general-purpose dual amplifiers and allows the device to feed higher-capacitance loads or drive downstream stages. Operation down to 2.7 V supports modern low-power electronics, while unity-gain stability simplifies buffer and fixed-gain implementations.
The SO-8 package provides a compact footprint for industrial, automotive, and embedded systems. The exposed-pad construction supports heat transfer when the amplifier operates at elevated output current, although board layout and thermal design remain important. Two amplifiers in one package also simplify dual-channel designs where both channels perform related functions.
Typical uses include sensor-signal conditioning, active filtering, audio and communications interfaces, data acquisition, and general-purpose analog buffers. The 200 mA drive capability is particularly useful when the op-amp must charge a downstream capacitance, interface with another analog circuit, or support a load beyond the range of a lightweight low-power amplifier.
Designers should verify the exact input common-mode range, output swing, bandwidth, slew rate, noise, offset, and thermal limits for the operating conditions. Input and output stability must be evaluated with the intended feedback network and load because capacitive loading can affect op-amp behavior even when unity-gain stable.
This page combines manufacturer-device facts, package details, sourcing guidance, and practical analog-design considerations to help engineers evaluate TS982IDW for low-voltage, dual-channel signal-processing designs.
بدائل مباشرة لـ TS982IDW — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
TS982IYDWT
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
TS982IDWT
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
TS982IDW الحدود القصوى والخصائص الكهربائية
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Output Current Capability | 200 mA |
| Minimum Operating Supply Voltage | 2.7 V |
| Rail-to-Rail Output | Yes |
| Gain Stability | Stable at unity gain |
| العلبة | 8-pin SO package |
| Package Type | SO-8 |
| Thermal Construction | Exposed-pad package |
| نوع التركيب | Surface mount |
| Automotive Application Suitability | Identified by the manufacturer for automotive applications |
| Industrial Application Suitability | Identified by the manufacturer for industrial applications |
دليل تكوين أطراف TS982IDW so-8
تكوين الأطراف لـ TS982IDW (حزمة so-8). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TS982IDW.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
TS982IDW مناسب لـ 6 التطبيقs: Industrial Sensor Signal Conditioning, Active Audio Signal Conditioning, Automotive Low-Voltage Interface, Data Acquisition Front End, Active Filter and Control Loop, Communications Interface Buffering.
Industrial Sensor Signal Conditioning
The TS982IDW fits two-channel industrial sensor conditioning because it operates from 2.7 V, provides rail-to-rail output, and remains stable at unity gain. Its two amplifier sections can buffer a sensor output and provide gain before conversion by an ADC. The 200 mA drive capability also gives the buffer more margin when driving sampling capacitance or a downstream protection stage. Designers should still compare the input common-mode range, bias current, offset, and noise against the particular sensor impedance and required accuracy before fixing the circuit.
موصى به
Active Audio Signal Conditioning
The TS982IDW can serve as a dual active-filter or audio-interface amplifier when a low-noise circuit must operate from a compact supply. Rail-to-rail output maximizes signal range in systems constrained to voltages as low as 2.7 V, while the 200 mA output-drive capability is useful for driving a following audio stage or a load network. The dual architecture reduces board area when both channels perform related filtering or buffering. Audio performance must still be evaluated using the manufacturer bandwidth, slew-rate, distortion, noise, and output-swing data for the selected gain and load.
موصى به
Automotive Low-Voltage Interface
The TS982IDW is identified by the manufacturer as suitable for automotive and industrial applications, making it appropriate for low-voltage vehicle or industrial interfaces that need two amplification channels. Operation down to 2.7 V supports compact sensor and actuator electronics, and the 200 mA output capability provides additional drive margin over lightweight op-amps. The exposed-pad SO-8 construction aids thermal transfer when correctly connected to the PCB power plane. For an automotive production design, confirm the exact grade, temperature range, qualification status, transient requirements, and lifetime-program status before release.
موصى به
Data Acquisition Front End
The TS982IDW is suitable for the input and output stages of a compact data-acquisition front end. One channel can buffer a transducer or sensor, and the second can provide gain or active filtering before an ADC samples the result. A 2.7 V minimum supply allows direct operation from low-voltage rails, while the 200 mA drive capability helps charge ADC input capacitance during conversions. The amplifier should be configured with short feedback paths and local supply bypassing. Input bias current, offset voltage, noise, bandwidth, common-mode limits, and ADC settling requirements determine whether the TS982IDW meets the measurement specification.
موصى به
Active Filter and Control Loop
The TS982IDW can implement dual active filters or small analog control loops when the circuit requires unity-gain stability and stronger output drive than a low-power amplifier provides. Rail-to-rail output lets the active stage operate more fully within a low-voltage signal range, and the two channels can form a cascaded filter, error amplifier, or PI-style loop. Because high closed-loop gain can reduce stability margin, the resistor and capacitor values must be checked against the amplifier frequency-response data. Place feedback components close to the device and decouple each supply rail to minimize high-frequency feedback and unwanted oscillation.
موصى به
Communications Interface Buffering
The TS982IDW can buffer and level-condition communications signals in compact control or interface equipment. Its two channels support independent receive and transmit-side buffering, while the low 2.7 V operating limit aligns with modern low-voltage digital systems. The 200 mA output-drive capability is advantageous when driving a downstream comparator, protection device, or capacitive node. Signal integrity depends on maintaining short feedback loops, providing local supply bypass, and keeping sensitive input traces away from switching nodes. Bandwidth, slew rate, output swing, and channel matching should be checked against the data rate and communication standard used in the final system.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ TS982IDW — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | TS982IYDWT | TS982IDWT |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | SO-8 | SO-8 - same package family | SO-8 - same package |
| Number of Amplifier Channels | 2 | 2 | 2 |
| Output Current Capability | 200 mA | 200 mA | 200 mA |
| Minimum Supply Voltage | 2.7 V | 2.7 V | 2.7 V |
| Rail-to-Rail Output | Yes | Yes | Yes |
| Unity-Gain Stability | Yes | Yes | Yes |
| Automotive Application Suitability | Yes | Yes | Yes |
| Ordering Difference | TS982IDW | Different grade and tape-and-reel ordering code | Tape-and-reel ordering code |
أبرز الفروقات
- Higher stated output-drive capability within a compact dual package (مقابلTS982IDWT)
- Operation from a compact 2.7 V supply (مقابلTS982IYDWT)
- Two rail-to-rail amplifier channels in an 8-pin SO package (مقابلTS982IDWT)
ملاحظات التصميم
The exposed-pad SO-8 package is intended to transfer heat through the PCB, but the pad must be connected according to the manufacturer package drawing. Estimated: output-stage dissipation equals the amplifier voltage drop multiplied by output current, multiplied by the number of simultaneously loaded channels. Compare that estimate with the maximum allowable dissipation and junction-temperature limit, then provide uninterrupted ground-plane copper beneath the exposed pad. The exposed pad is normally tied to the appropriate supply-ground node rather than left electrically floating.
Place the input, output, feedback, and supply-bypass components close to their associated TS982IDW pins. Keep the feedback loop compact, particularly at higher closed-loop gains, to reduce parasitic feedback and oscillation risk. Route the exposed pad directly into a solid ground or supply-ground plane using short, low-impedance connections. Sensitive input nodes should remain away from high-current output paths and switching-node copper to reduce induced distortion and common-mode conversion.
Do not treat unity-gain stability as permission for every load or feedback arrangement. Before release, check the selected gain, feedback resistance, load capacitance, supply range, output swing, and operating temperature. The manufacturer reports 200 mA output-drive capability, but continuous operation near that limit can create significant heat. Also verify which TS982 ordering code and temperature grade match the production environment; the family description alone does not establish the qualification status of every variant.
معلومات الامتثال
The manufacturer identifies the TS982 as suitable for automotive and industrial applications, but the exact TS982IDW ordering code's RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status requires confirmation from the current manufacturer product documentation.