STMicroelectronics

TS982IDW - Dual 200mA R-R Op Amp | STMicroelectronics

Référence : TS982IDW ✓ Actif
2.7 V Vdss 200 mA Id 8-pin SO package Package
MOQ : 1 |

TS982IDW Présentation

STMicroelectronics TS982IDW is a dual operational amplifier with rail-to-rail output capability, 200 mA output-current drive, and operation from voltages as low as 2.7 V. The device is housed in an 8-pin SO package and is stable at unity gain. Its combination of low supply voltage, broad output-current capability, and dual-channel integration makes it suitable for industrial and automotive signal-conditioning systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TS982 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its dual architecture provides two amplifier channels in one package, reducing component count when a board needs matched signal conditioning, buffering, or gain stages.

The TS982's rail-to-rail output stage can approach the supply rails, increasing usable output-voltage range in low-voltage systems. Its ability to drive 200 mA makes it stronger than many general-purpose dual amplifiers and allows the device to feed higher-capacitance loads or drive downstream stages. Operation down to 2.7 V supports modern low-power electronics, while unity-gain stability simplifies buffer and fixed-gain implementations.

The SO-8 package provides a compact footprint for industrial, automotive, and embedded systems. The exposed-pad construction supports heat transfer when the amplifier operates at elevated output current, although board layout and thermal design remain important. Two amplifiers in one package also simplify dual-channel designs where both channels perform related functions.

Typical uses include sensor-signal conditioning, active filtering, audio and communications interfaces, data acquisition, and general-purpose analog buffers. The 200 mA drive capability is particularly useful when the op-amp must charge a downstream capacitance, interface with another analog circuit, or support a load beyond the range of a lightweight low-power amplifier.

Designers should verify the exact input common-mode range, output swing, bandwidth, slew rate, noise, offset, and thermal limits for the operating conditions. Input and output stability must be evaluated with the intended feedback network and load because capacitive loading can affect op-amp behavior even when unity-gain stable.

This page combines manufacturer-device facts, package details, sourcing guidance, and practical analog-design considerations to help engineers evaluate TS982IDW for low-voltage, dual-channel signal-processing designs.

Alternatives de remplacement direct pour TS982IDW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

TS982IYDWT

✅ Remplacement direct
📦 SO-8
Different temperature-grade and tape-and-reel ordering codes; the manufacturer family description identifies the same dual 200 mA rail-to-rail amplifier and 2.7 V minimum supply capability.

📋 Alternative de référence (hors catalogue)

TS982IDWT

✅ Remplacement direct
📦 SO-8
Identical TS982IDW device ordering with tape-and-reel shipping rather than the TS982IDW reel-code presentation; electrical characteristics are unchanged.

📋 Alternative de référence (hors catalogue)

TS982IDW Valeurs maximales et caractéristiques électriques

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Output Current Capability 200 mA
Minimum Operating Supply Voltage 2.7 V
Rail-to-Rail Output Yes
Gain Stability Stable at unity gain
Boîtier 8-pin SO package
Package Type SO-8
Thermal Construction Exposed-pad package
Type de montage Surface mount
Automotive Application Suitability Identified by the manufacturer for automotive applications
Industrial Application Suitability Identified by the manufacturer for industrial applications

Guide de configuration des broches du TS982IDW so-8

Configuration des broches du TS982IDW (boîtier so-8). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier so-8 pour le TS982IDW

Aucune donnée de brochage détaillée disponible pour TS982IDW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

TS982IDW convient pour 6 applications: Industrial Sensor Signal Conditioning, Active Audio Signal Conditioning, Automotive Low-Voltage Interface, Data Acquisition Front End, Active Filter and Control Loop, Communications Interface Buffering.

🏭

Industrial Sensor Signal Conditioning

The TS982IDW fits two-channel industrial sensor conditioning because it operates from 2.7 V, provides rail-to-rail output, and remains stable at unity gain. Its two amplifier sections can buffer a sensor output and provide gain before conversion by an ADC. The 200 mA drive capability also gives the buffer more margin when driving sampling capacitance or a downstream protection stage. Designers should still compare the input common-mode range, bias current, offset, and noise against the particular sensor impedance and required accuracy before fixing the circuit.

🎧

Active Audio Signal Conditioning

The TS982IDW can serve as a dual active-filter or audio-interface amplifier when a low-noise circuit must operate from a compact supply. Rail-to-rail output maximizes signal range in systems constrained to voltages as low as 2.7 V, while the 200 mA output-drive capability is useful for driving a following audio stage or a load network. The dual architecture reduces board area when both channels perform related filtering or buffering. Audio performance must still be evaluated using the manufacturer bandwidth, slew-rate, distortion, noise, and output-swing data for the selected gain and load.

🚗

Automotive Low-Voltage Interface

The TS982IDW is identified by the manufacturer as suitable for automotive and industrial applications, making it appropriate for low-voltage vehicle or industrial interfaces that need two amplification channels. Operation down to 2.7 V supports compact sensor and actuator electronics, and the 200 mA output capability provides additional drive margin over lightweight op-amps. The exposed-pad SO-8 construction aids thermal transfer when correctly connected to the PCB power plane. For an automotive production design, confirm the exact grade, temperature range, qualification status, transient requirements, and lifetime-program status before release.

📊

Data Acquisition Front End

The TS982IDW is suitable for the input and output stages of a compact data-acquisition front end. One channel can buffer a transducer or sensor, and the second can provide gain or active filtering before an ADC samples the result. A 2.7 V minimum supply allows direct operation from low-voltage rails, while the 200 mA drive capability helps charge ADC input capacitance during conversions. The amplifier should be configured with short feedback paths and local supply bypassing. Input bias current, offset voltage, noise, bandwidth, common-mode limits, and ADC settling requirements determine whether the TS982IDW meets the measurement specification.

⚙️

Active Filter and Control Loop

The TS982IDW can implement dual active filters or small analog control loops when the circuit requires unity-gain stability and stronger output drive than a low-power amplifier provides. Rail-to-rail output lets the active stage operate more fully within a low-voltage signal range, and the two channels can form a cascaded filter, error amplifier, or PI-style loop. Because high closed-loop gain can reduce stability margin, the resistor and capacitor values must be checked against the amplifier frequency-response data. Place feedback components close to the device and decouple each supply rail to minimize high-frequency feedback and unwanted oscillation.

🌐

Communications Interface Buffering

The TS982IDW can buffer and level-condition communications signals in compact control or interface equipment. Its two channels support independent receive and transmit-side buffering, while the low 2.7 V operating limit aligns with modern low-voltage digital systems. The 200 mA output-drive capability is advantageous when driving a downstream comparator, protection device, or capacitive node. Signal integrity depends on maintaining short feedback loops, providing local supply bypass, and keeping sensitive input traces away from switching nodes. Bandwidth, slew rate, output swing, and channel matching should be checked against the data rate and communication standard used in the final system.

Récapitulatif des produits recommandés

TS982IDW STMicroelectronics Utilisé dans : Industrial Sensor Signal Conditioning, Active Audio Signal Conditioning, Automotive Low-Voltage Interface, Data Acquisition Front End, Active Filter and Control Loop, Communications Interface Buffering TS982IDWT Tape-and-reel ordering option for the same device family Utilisé dans : Industrial Sensor Signal Conditioning, Active Audio Signal Conditioning, Automotive Low-Voltage Interface, Data Acquisition Front End, Active Filter and Control Loop, Communications Interface Buffering
What is the STMicroelectronics TS982IDW?
The STMicroelectronics TS982IDW is a dual, general-purpose operational amplifier in an 8-pin SO package. According to the manufacturer datasheet, it provides rail-to-rail output operation, can drive 200 mA, operates at supply voltages as low as 2.7 V, and is stable with a unity-gain feedback configuration. The two-channel package is intended for signal conditioning, buffering, active filtering, automotive equipment, and industrial systems.
What is the minimum supply voltage for TS982IDW?
The TS982IDW operates from supply voltages as low as 2.7 V, as stated in the STMicroelectronics manufacturer datasheet. This low-voltage capability supports compact battery-powered, industrial-sensor, and automotive electronics designs. The maximum permitted supply voltage, absolute maximum ratings, and usable common-mode range should be checked against the datasheet before applying the amplifier outside a nominal 2.7 V operating condition.
Can TS982IDW drive 200 mA?
Yes, the TS982IDW is specified to drive an output current of 200 mA. The manufacturer datasheet emphasizes this capability together with rail-to-rail output and an SO-8 exposed-pad package. That drive current makes the amplifier suitable for capacitive loading and downstream analog interfaces, provided that output-stage power dissipation, package thermal performance, and load stability are evaluated under the intended operating conditions.
Is TS982IDW stable at unity gain?
The TS982IDW is stable at unity gain according to the manufacturer datasheet. This permits direct voltage-follower use when feedback is configured for a gain of one and simplifies low-voltage buffer implementations. Unity-gain stability does not eliminate the need to check the chosen feedback resistors, output-load capacitance, supply decoupling, and the operating gain against the complete electrical-characteristics tables.
Where can I download the TS982IDW datasheet PDF?
The TS982IDW datasheet PDF can be obtained from the STMicroelectronics document linked on this product page, while additional documentation copies are also indexed by the manufacturer part number. The manufacturer datasheet is the controlling source for pin assignments, electrical characteristics, recommended operating conditions, and application details. Download the current STMicroelectronics document before finalizing a PCB layout or production design.
Where can I find the TS982IDW pinout?
The TS982IDW pin assignments are shown in the pin-description section and package drawing of the STMicroelectronics manufacturer datasheet. The component uses an 8-pin SO package with two operational-amplifier channels and an exposed thermal pad. Use the manufacturer drawing when assigning PCB tracks because exposed-pad construction and channel orientation must be matched exactly to the selected package variant.
TS982IDW vs TS982IYDWT: which is the better drop-in option?
TS982IDW and TS982IYDWT belong to the same TS982 dual-amplifier family, but they are not identical ordering codes. TS982IDW is the industrial SO-8 ordering option, while TS982IYDWT includes different grade and tape-and-reel ordering information. The TS982IYDWT can serve as a same-family alternative when its temperature grade, package construction, and sourcing requirements match the design, but engineers should compare the complete ordering tables before approving it as a drop-in replacement.
When should I choose TS982IDW over another dual op amp?
Choose TS982IDW when the design needs two amplifier channels, operation down to 2.7 V, rail-to-rail output behavior, and approximately 200 mA of output-drive capability in an 8-pin SO package. It is particularly relevant when a conventional low-current amplifier cannot charge the intended load. For precision or low-noise instrumentation, compare offset, drift, noise, bandwidth, and common-mode specifications before making the final choice.
What can replace TS982IDW?
A TS982 replacement should preserve the 8-pin SO footprint, two-amplifier channel arrangement, supply-voltage compatibility, rail-to-rail behavior, and approximately 200 mA output-drive capability. TS982IYDWT is a same-family option found through TS982 cross-reference results, subject to its grade and reel-ordering differences. The cross-reference results do not establish several distinct pin-compatible alternatives, so a blanket replacement recommendation would be inappropriate without a complete electrical comparison.
Is TS982IDW suitable for sensor signal conditioning?
Yes, TS982IDW is suitable for many sensor signal-conditioning applications because it combines two channels, low-voltage operation from 2.7 V, rail-to-rail output, unity-gain stability, and relatively strong 200 mA drive capability. It can buffer sensor outputs, implement active filters, and condition signals before an ADC. The sensor impedance, common-mode range, input bias current, noise, and required accuracy must still be checked before selecting the amplifier.
What is the best STMicroelectronics equivalent for TS982IDW?
TS982IYDWT is the closest same-family STMicroelectronics candidate identified for TS982IDW because it uses the TS982 device family and appears in an explicit TS982IDW comparison result. Its ordering code indicates a different grade and tape-and-reel configuration, so it should not be treated as an unconditional substitute. Confirm the package, temperature range, electrical ratings, and lifecycle status against the intended production requirements.
How much heat does TS982IDW dissipate at 200 mA?
TS982IDW power dissipation depends on the actual supply voltage, output voltage, output current, and ambient temperature, so no single dissipation value applies to every operating condition. The relevant estimate is the average output-stage dissipation multiplied by the number of channels actively dissipating power. Verify this figure against the package thermal information and PCB copper area, and use the manufacturer limits to maintain acceptable junction temperature.
Can TS982IDW drive a capacitive load?
The TS982IDW can drive higher-current and capacitive loads more effectively than a lightweight low-power amplifier because its rated output current reaches 200 mA. Nevertheless, capacitive loading can affect stability, output swing, and transient response. The final load capacitance, feedback gain, supply voltage, and output frequency should be checked using the manufacturer guidance, and an isolation resistor may be appropriate for unusually capacitive loads.
Where to buy TS982IDW online?
Use the Request a Quote form on this page to ask for TS982IDW availability, minimum order quantity, and current lead time. The form provides a direct purchasing path without requiring a static price or inventory claim that could become outdated. For production planning, request the exact TS982IDW ordering code and state the required delivery quantity, date, and packaging needs.
What is the price and lead time for TS982IDW?
Submit a TS982IDW request through the Request a Quote form on this page for current pricing, stock status, minimum order quantity, and lead time. Quote-based handling keeps commercial data tied to the requested quantity and current supply conditions. Include the SO-8 package requirement, production quantity, target date, and any need for periodic operational shipments so the supplier can quote the appropriate configuration.

Données de référence d'ingénierie pour TS982IDW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose TS982IDW when a compact dual-channel amplifier must operate from a supply as low as 2.7 V, provide rail-to-rail output, and drive up to 200 mA while remaining stable at unity gain. It is well matched to industrial and automotive signal-conditioning designs where two related analog paths share an SO-8 footprint. TS982IDWT provides the same device family in a tape-and-reel ordering configuration and is useful when automated assembly requires that reel code. TS982IYDWT is relevant when its grade and tape-and-reel ordering meet the environmental and manufacturing requirements. Because the cross-reference results do not identify three additional distinct, electrically equivalent drop-in devices, consider broader competitors only after verifying pinout, common-mode range, output swing, noise, offset, bandwidth, slew rate, and temperature grade in detail.

Comparaison avec les alternatives

Paramètre Ce produit TS982IYDWT TS982IDWT
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Package SO-8 SO-8 - same package family SO-8 - same package
Number of Amplifier Channels 2 2 2
Output Current Capability 200 mA 200 mA 200 mA
Minimum Supply Voltage 2.7 V 2.7 V 2.7 V
Rail-to-Rail Output Yes Yes Yes
Unity-Gain Stability Yes Yes Yes
Automotive Application Suitability Yes Yes Yes
Ordering Difference TS982IDW Different grade and tape-and-reel ordering code Tape-and-reel ordering code

Principaux différenciateurs

  • Higher stated output-drive capability within a compact dual package (vs TS982IDWT)
  • Operation from a compact 2.7 V supply (vs TS982IYDWT)
  • Two rail-to-rail amplifier channels in an 8-pin SO package (vs TS982IDWT)

Notes de conception

The exposed-pad SO-8 package is intended to transfer heat through the PCB, but the pad must be connected according to the manufacturer package drawing. Estimated: output-stage dissipation equals the amplifier voltage drop multiplied by output current, multiplied by the number of simultaneously loaded channels. Compare that estimate with the maximum allowable dissipation and junction-temperature limit, then provide uninterrupted ground-plane copper beneath the exposed pad. The exposed pad is normally tied to the appropriate supply-ground node rather than left electrically floating.

Place the input, output, feedback, and supply-bypass components close to their associated TS982IDW pins. Keep the feedback loop compact, particularly at higher closed-loop gains, to reduce parasitic feedback and oscillation risk. Route the exposed pad directly into a solid ground or supply-ground plane using short, low-impedance connections. Sensitive input nodes should remain away from high-current output paths and switching-node copper to reduce induced distortion and common-mode conversion.

Do not treat unity-gain stability as permission for every load or feedback arrangement. Before release, check the selected gain, feedback resistance, load capacitance, supply range, output swing, and operating temperature. The manufacturer reports 200 mA output-drive capability, but continuous operation near that limit can create significant heat. Also verify which TS982 ordering code and temperature grade match the production environment; the family description alone does not establish the qualification status of every variant.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer identifies the TS982 as suitable for automotive and industrial applications, but the exact TS982IDW ordering code's RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status requires confirmation from the current manufacturer product documentation.

Recherches associées

TS982IDW datasheet TS982IDW pinout TS982IDW datasheet pdf TS982IDW equivalent TS982IDW replacement TS982IDW cross reference TS982IDW vs TS982IDWT TS982IDW price TS982IDW stock STMicroelectronics TS982IDW TS982IDW SO-8 footprint TS982IDW sensor signal conditioning

Composants & termes associés

STMicroelectronics TS982IDW TS982IDWT TS982IYDWT TS982 operational amplifier dual amplifier rail-to-rail output analog integrated circuit signal conditioning active filter voltage follower unity-gain stability output current supply voltage SO-8 exposed-pad package surface mount industrial electronics automotive electronics 2.7 V minimum supply 200 mA output drive ADC interface audio signal conditioning
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ