Microchip Technology

VSC8530XMW-04 - 1-Port 10/100 Cu PHY | Microchip

MPN: VSC8530XMW-04 ✓ نشط
0.95 V or 2.38 V Vdss 48-pin single-row QFN Package
الحد الأدنى للطلب: 1 |

VSC8530XMW-04 نظرة عامة

The Microchip Technology VSC8530XMW-04 is a single-port copper Ethernet physical-layer transceiver supporting 10 Mbps and 100 Mbps operation. It provides RGMII and RMII host interfaces, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, and iTMP Synchronous Ethernet support. The device is packaged in a 48-pin, single-row QFN with a 6 mm by 6 mm body and exposed thermal pad.

An Ethernet PHY, also called a copper physical-layer transceiver, converts logical data into signals that can traverse a twisted-pair Ethernet cable and recovers those signals at the receiving endpoint. Within the Ethernet hierarchy, the PHY sits between a MAC or switch fabric and a network transformer or integrated magnetics. The VSC8530XMW-04 therefore serves as the physical-layer interface for compact industrial, communications, and embedded Ethernet equipment.

The principal features of this VSC8530-04 device include one 10/100BASE-T port, support for RGMII and RMII host interfaces, and broad LVCMOS I/O compatibility. IEEE 802.3az Energy Efficient Ethernet can reduce power consumption when link traffic is light, while Wake-on-LAN supports remote activation. iTMP Synchronous Ethernet adds timing-related functionality for systems requiring precise network clock support.

The single-row QFN-48 construction measures 6 mm by 6 mm and is intended for space-constrained equipment. Its exposed pad provides the primary thermal and electrical connection to the PCB. RGMII offers a parallel, high-speed host connection for higher-performance Ethernet designs, whereas RMII reduces host interface pin count and can simplify routing on cost-sensitive or space-constrained platforms.

Typical applications include industrial Ethernet gateways, compact network switches, embedded controllers, serial-to-Ethernet equipment, and communications equipment requiring a copper 10/100 connection. The device is also appropriate for synchronized network equipment requiring iTMP support and systems that need Wake-on-LAN behavior over wired Ethernet.

PCB implementation requires careful high-speed signal routing, a controlled 50-ohm differential transmission path, adequate ground-plane continuity, and clean separation between Ethernet and sensitive analog circuitry. Place the PHY close to the magnetics or network connector, follow the manufacturer's reference-layout guidance, and provide the specified power, decoupling, and crystal or clock components.

This product page consolidates the manufacturer's functional description, package information, interface options, sourcing fields, and drop-in alternatives into an engineering-focused reference. It also provides application guidance and a comparison of documented characteristics for easier design qualification and replacement assessment.

بدائل مباشرة لـ VSC8530XMW-04 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع VSC8530XMW-04 (نفس عامل الشكل والبصمة) — يختلف في Energy Efficient Ethernet, Host Interface, Package, Port Count, Product Type.

Microchip Technology
Energy Efficient Ethernet: IEEE 802.3az supported
Host Interface: RGMII or RMII
Product Type: Single-port copper Ethernet PHY
قارن مع VSC8530XMW-04 →
Microchip Technology
Energy Efficient Ethernet: IEEE 802.3az (EEE) supported
Package: 48-pin QFN (6x6 mm)
Port Count: 1
قارن مع VSC8530XMW-04 →

VSC8530XMW-05

✅ بديل مباشر
📦 48-QFN (6x6)
Same 1 channel, 10 Mbps and 100 Mbps data rates, and 48-QFN 6x6 footprint as VSC8530XMW-04; the -05 revision-specific electrical and feature differences remain to be verified.

📋 بديل مرجعي (غير موجود في الكتالوج)

VSC8530XMW-04 المواصفات

Port Count 1 port
Ethernet Data Rate 10 Mbps and 100 Mbps
Physical Layer Standard 10/100BASE-T copper Ethernet
Host Interface RGMII and RMII
Energy Efficient Ethernet IEEE 802.3az
Wake-on-LAN Support Supported
Synchronous Ethernet iTMP Synchronous Ethernet
I/O Logic Compatibility LVCMOS
جهد التغذية 0.95 V or 2.38 V
العلبة 48-pin single-row QFN
Package Dimensions 6 mm x 6 mm
Exposed Thermal Pad Present
نوع التركيب Surface mount
Temperature Grade Industrial temperature

دليل تكوين أطراف VSC8530XMW-04 6 mm x 6 mm

تكوين الأطراف لـ VSC8530XMW-04 (حزمة 6 mm x 6 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 6 mm x 6 mm لـ VSC8530XMW-04

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ VSC8530XMW-04.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

VSC8530XMW-04 مناسب لـ 6 التطبيقs: Industrial Ethernet Gateway, Compact Network Switch, Embedded Serial-to-Ethernet Equipment, Synchronized Network Equipment, Remote Monitoring Equipment, Space-Constrained Communications Product.

🏭

Industrial Ethernet Gateway

The VSC8530XMW-04 fits an industrial gateway that requires one 10/100BASE-T copper connection while preserving board area for sensing, control, and communications functions. Its RGMII interface supports a parallel host connection to a capable Ethernet controller or switch fabric, while the alternative RMII interface can reduce host-side pin requirements. IEEE 802.3az Energy Efficient Ethernet is useful when the gateway spends substantial time with lightly loaded links. The 6 mm by 6 mm, 48-pin single-row QFN helps limit footprint in space-constrained industrial enclosures. Final qualification should cover the industrial temperature range, isolation strategy, magnetics selection, surge requirements, and the EMC environment at the cable connector.

🌐

Compact Network Switch

The VSC8530XMW-04 can serve as the copper physical layer for a compact 10/100 Ethernet switch port. Its one-channel, 10 Mbps and 100 Mbps architecture maps directly to a Fast Ethernet uplink, while RGMII provides a high-speed parallel interface to the switch fabric. For designs with limited host routing, RMII offers another integration path. The device's small 6 mm by 6 mm QFN-48 package is valuable in managed switches and edge products with dense port layouts. IEEE 802.3az Energy Efficient Ethernet can lower power consumption on lightly used links, although correct operation requires compatible switch firmware and link partners. Designers should preserve uninterrupted ground planes, follow differential-impedance rules, and isolate PHY clocks from noisy switching nodes.

🧩

Embedded Serial-to-Ethernet Equipment

The VSC8530XMW-04 is appropriate for embedded serial-to-Ethernet equipment that needs a wired 10/100 copper connection without adding a large magnetics-and-PHY section to the controller board. The PHY works with an embedded Ethernet controller or switch fabric through RGMII or RMII, allowing system partitioning based on processor I/O availability and timing requirements. Its 48-pin QFN package limits connector-adjacent board area, while LVCMOS support helps align with modern host logic. Wake-on-LAN can support remote maintenance and network-initiated wake behavior in managed equipment. Engineering validation should cover clock tolerance, startup sequencing, cable diagnostics, link negotiation, isolation, and system-level EMC performance at the external RJ45 or industrial connector.

🖥️

Synchronized Network Equipment

The VSC8530XMW-04 is suitable for network equipment that benefits from iTMP Synchronous Ethernet capability alongside a standard 10/100 copper link. The manufacturer identifies iTMP Synchronous Ethernet as a feature of the VSC8530-04, allowing designs to explore precise Ethernet timing relationships for synchronization-oriented equipment. Its RGMII and RMII choices let the system designer balance interface performance against pin count and routing complexity. Because synchronization designs are sensitive to clock architecture, jitter, and reference-clock quality, engineers should use the manufacturer's timing diagrams and reference design rather than infer compatibility from the family name. Deployment also requires a network topology and link partner that support the intended synchronization method.

📱

Remote Monitoring Equipment

The VSC8530XMW-04 can support remote monitoring and control products that need a reliable 10/100BASE-T management connection. Wake-on-LAN provides a useful control feature for equipment expected to remain connected while allowing selective remote activation. The PHY's Energy Efficient Ethernet support can also benefit links that carry intermittent management traffic, while the compact 48-QFN package preserves board area for sensing and actuation electronics. RGMII is suitable when the host controller supports a high-speed parallel interface; RMII may be preferable where connector placement and routing space are more constrained. Product qualification should verify network wake-up behavior through the complete host stack, Ethernet magnetics, cable length, surge protection, and the enclosure's EMC environment.

🔧

Space-Constrained Communications Product

The VSC8530XMW-04 addresses communications products where connector density and PCB area limit the available footprint for copper Ethernet interfaces. Its single-row 48-pin QFN occupies a 6 mm by 6 mm body and includes an exposed pad for board-level thermal and electrical performance. The device supports both RGMII and RMII, allowing the system architect to select the host interface that best fits the processor, switch fabric, and routing density. IEEE 802.3az Energy Efficient Ethernet adds an efficiency option for lightly loaded network links, while Wake-on-LAN supports remote system management. A careful layout must provide a continuous reference plane, controlled differential impedance, short return paths, clean clock distribution, and the required external components identified in the manufacturer reference design.

What is the VSC8530XMW-04?
The VSC8530XMW-04 is a single-port 10/100BASE-T copper Ethernet PHY from Microchip Technology. According to the manufacturer product page, it supports RGMII and RMII host interfaces, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, and iTMP Synchronous Ethernet. It is intended for compact Ethernet equipment operating from a single copper port and is housed in a 6 mm by 6 mm, 48-pin single-row QFN package.
What interfaces are supported by the VSC8530XMW-04?
The VSC8530XMW-04 supports RGMII and RMII for connection to a host controller or Ethernet switch fabric. The manufacturer identifies broad LVCMOS I/O support as a key feature of the VSC8530-04. RGMII provides a parallel high-speed interface, while RMII provides a lower-pin-count alternative for compact or cost-sensitive designs. Interface voltage configuration and timing constraints should be confirmed in the manufacturer datasheet.
Which Ethernet speeds does the VSC8530XMW-04 support?
The VSC8530XMW-04 supports 10 Mbps and 100 Mbps copper Ethernet operation through one channel. Comparative technical information identifies it as a one-channel 10 Mbps and 100 Mbps PHY, while the manufacturer describes the device as a low-power copper PHY. It is therefore intended for 10/100BASE-T links rather than Gigabit Ethernet, and it should not be selected where 1000BASE-T operation is required.
Where can I download the VSC8530XMW-04 datasheet PDF?
The VSC8530XMW-04 datasheet can be accessed through the linked Octopart datasheet page or from the Microchip Technology VSC8530 product page on this page. The manufacturer documentation provides the detailed electrical limits, timing diagrams, pin descriptions, reference circuits, and layout recommendations. Use the manufacturer document as the controlling source when implementing power sequencing, magnetics, clocking, and high-speed signal routing.
Where can I find the VSC8530XMW-04 pinout?
The complete VSC8530XMW-04 pin assignments are located in the pin-description table and package drawing in the manufacturer datasheet. The device uses a 48-pin single-row QFN package with an exposed pad. Use the pin-description table when assigning power, ground, RGMII or RMII signals, clocks, management interfaces, and the exposed-pad connection; do not infer individual pin names from the package dimensions alone.
Does the VSC8530XMW-04 support Energy Efficient Ethernet?
Yes, the VSC8530XMW-04 supports IEEE 802.3az Energy Efficient Ethernet. The manufacturer describes Energy Efficient Ethernet as a core feature of the VSC8530 family, which is particularly useful when copper links may remain lightly loaded. This capability helps equipment reduce link-related power use during idle periods. Host software, network configuration, and the connected switch must also support the corresponding energy-saving behavior.
What is the difference between VSC8530XMW-04 and VSC8530XMW-05?
The VSC8530XMW-04 and VSC8530XMW-05 are closely related Microchip 48-QFN Ethernet PHYs. Comparative technical information lists the same one-channel architecture, 10 Mbps and 100 Mbps support, and QFN-48 package for both. The documented distinction is the -04 versus -05 device revision; detailed electrical and feature differences should be checked in the respective datasheets before treating the -05 as a replacement.
What can replace the VSC8530XMW-04?
The closest documented same-footprint candidate is the Microchip Technology VSC8530XMW-05, which uses the same 48-pin, 6 mm by 6 mm QFN package and the same one-channel 10/100 Mbps Ethernet architecture. It should be treated as a revision candidate rather than an unconditional replacement until clocking, management, power, magnetic-interface, and temperature requirements are compared against the manufacturer datasheets.
Is the VSC8530XMW-05 a drop-in replacement for the VSC8530XMW-04?
The VSC8530XMW-05 is a candidate drop-in replacement because it has the same 48-QFN package and one-channel 10/100 Mbps Ethernet configuration. Pin compatibility still requires confirmation of every signal, power domain, clock requirement, strap, and exposed-pad connection in the manufacturer documentation. Treat the candidate as conditional until those details and the revision-specific features have been verified against the intended system design.
When should I choose the VSC8530XMW-04 over the VSC8530XMW-05?
Choose the VSC8530XMW-04 when its -04 revision satisfies the exact electrical, timing, clocking, and qualification requirements of an existing design. The VSC8530XMW-05 is appropriate when its revision-specific documentation confirms equal or better compatibility. Both devices occupy a 48-pin, 6 mm by 6 mm QFN footprint and provide a one-channel 10/100 Mbps copper PHY, so the decision should be based on verified features rather than package similarity alone.
Is the VSC8530XMW-04 suitable for industrial Ethernet equipment?
The VSC8530XMW-04 is identified as an industrial-temperature, single-port copper Ethernet PHY in a space-constrained 48-QFN package. Its RGMII and RMII interfaces support different host architectures, while IEEE 802.3az Energy Efficient Ethernet and Wake-on-LAN add practical capabilities for industrial gateways and embedded communications products. Final suitability should be confirmed against the full operating-temperature range and system EMC requirements.
What are the key specifications of VSC8530XMW-04 that engineers should know?
The key VSC8530XMW-04 specifications are one 10/100BASE-T copper port, RGMII and RMII host interfaces, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, iTMP Synchronous Ethernet, LVCMOS I/O support, and a 48-pin 6 mm by 6 mm QFN package with an exposed pad. According to the Microchip Technology product page, the device is designed for low power and space-constrained Ethernet implementations.
What is the best cross-brand equivalent for the VSC8530XMW-04?
No cross-brand equivalent can be designated as a verified drop-in replacement from the available manufacturer and cross-reference information. A valid cross-brand substitute would need the same 48-QFN footprint, pin-to-pin signal compatibility, one-channel 10/100 Mbps operation, RGMII or RMII support, compatible clocking, and equivalent management functions. Use the Microchip cross-reference search and verify every electrical requirement before selecting a competitor device.
Where can I buy the VSC8530XMW-04 online?
The VSC8530XMW-04 can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, production allocation, and lead-time confirmation. Before placing an order, identify the required package suffix, industrial-temperature grade, and approved sourcing channel so the quotation corresponds to the exact VSC8530XMW-04 configuration.
What is the price and lead time of the VSC8530XMW-04?
Current price and lead time should be obtained through the Request a Quote form on this page because commercial terms can change with quantity, inventory, and production allocation. The form allows the exact VSC8530XMW-04 suffix and requested quantity to be evaluated without relying on a stale price table. For production planning, confirm the orderable package format, assembly readiness, and any manufacturer lead-time constraints before committing the BOM.
Is the VSC8530XMW-04 in stock?
Current VSC8530XMW-04 stock should be confirmed through the Request a Quote form on this page. Availability can vary by package suffix and order quantity, so a generic family-level stock statement is not sufficient for procurement. Submit the exact MPN, target quantity, and required delivery date. The quote response should identify available supply, lead time, and any scheduled-production constraints for the requested configuration.

بيانات مرجعية هندسية لـ VSC8530XMW-04 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Select the VSC8530XMW-04 when a compact design needs a single 10/100BASE-T copper port with RGMII or RMII connectivity, IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN, or iTMP Synchronous Ethernet. Its 48-QFN 6x6 package is suitable for industrial gateways, compact switches, embedded controllers, and remote-management equipment. Consider the VSC8530XMW-05 when its revision-specific datasheet confirms equal or better clocking, management, electrical, and qualification compatibility; it shares the same package and one-channel 10/100 Mbps architecture. No cross-brand part should be treated as a drop-in replacement without a complete pin, clock, power, interface, and timing comparison. For either revision, follow the manufacturer reference layout and validate magnetics, protection, differential routing, thermal-pad assembly, and system EMC behavior before production release.

المقارنة مع البدائل

المعامل هذا المنتج VSC8530XMW-05
Brand Microchip Technology Microchip Technology
Package 48-QFN (6x6) 48-QFN (6x6)
Port Count 1 channel 1 channel
Ethernet Data Rate 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Supply Voltage 0.95 V or 2.38 V 0.95 V or 2.38 V

أبرز الفروقات

  • Combines multiple copper Ethernet functions in one compact device (مقابلVSC8530XMW-05)
  • Matches the VSC8530XMW-05 core physical and data-rate configuration (مقابلVSC8530XMW-05)
  • Supports both parallel and reduced-pin-count host interfaces (مقابلVSC8530XMW-05)

ملاحظات التصميم

Place the PHY close to the Ethernet transformer or integrated magnetics and preserve a continuous ground plane beneath the device and signal route. Follow the manufacturer reference layout for the 48-QFN exposed pad, input and output decoupling, clock source, and differential pairs. Keep the RGMII or RMII host signals away from switching power-conversion nodes and analog sensor circuitry to minimize coupling into the timing-sensitive interface.

Route the copper Ethernet differential pairs as a controlled-impedance pair with matched length and minimal stubs. Provide the magnetics and protection components close to the cable or board connector so transient energy does not propagate into the PHY. Validate the complete channel with the manufacturer-recommended component values and account for connector, magnetics, and PCB effects rather than designing the interface solely from nominal single-ended rise times.

Use separate, well-decoupled supply paths for the core, analog, and digital I/O requirements defined in the manufacturer datasheet. Place the prescribed capacitors at their designated power pins and keep return-current paths short through the exposed pad and ground plane. Check startup sequencing and voltage tolerances before enabling the host interface. Any estimated rail-current and dissipation values should be recalculated from the actual clock, interface, and load operating conditions.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer product page identifies an industrial-temperature Ethernet PHY, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not included in the available product information.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

VSC8530XMW-04 datasheet VSC8530XMW-04 datasheet pdf VSC8530XMW-04 pinout VSC8530XMW-04 equivalent VSC8530XMW-04 replacement VSC8530XMW-04 cross reference VSC8530XMW-04 vs VSC8530XMW-05 Microchip VSC8530XMW-04 VSC8530XMW-04 48-QFN VSC8530XMW-04 RGMII RMII VSC8530XMW-04 industrial Ethernet VSC8530XMW-04 price VSC8530XMW-04 stock VSC8530XMW-04 schematic VSC8530XMW-04 footprint

المكونات والمصطلحات ذات الصلة

Microchip Technology VSC8530XMW-04 VSC8530 VSC8530XMW-05 Ethernet PHY copper physical-layer transceiver 10/100BASE-T Ethernet interface IC RGMII RMII IEEE 802.3az Energy Efficient Ethernet Wake-on-LAN iTMP Synchronous Ethernet LVCMOS QFN-48 single-row QFN surface mount industrial Ethernet gateway compact network switch Ethernet magnetics embedded controller differential pair exposed thermal pad
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر