VSC8530XMW-04 - 1-Port 10/100 Cu PHY | Microchip
料号: VSC8530XMW-04 ✓ 量产中VSC8530XMW-04 概述
An Ethernet PHY, also called a copper physical-layer transceiver, converts logical data into signals that can traverse a twisted-pair Ethernet cable and recovers those signals at the receiving endpoint. Within the Ethernet hierarchy, the PHY sits between a MAC or switch fabric and a network transformer or integrated magnetics. The VSC8530XMW-04 therefore serves as the physical-layer interface for compact industrial, communications, and embedded Ethernet equipment.
The principal features of this VSC8530-04 device include one 10/100BASE-T port, support for RGMII and RMII host interfaces, and broad LVCMOS I/O compatibility. IEEE 802.3az Energy Efficient Ethernet can reduce power consumption when link traffic is light, while Wake-on-LAN supports remote activation. iTMP Synchronous Ethernet adds timing-related functionality for systems requiring precise network clock support.
The single-row QFN-48 construction measures 6 mm by 6 mm and is intended for space-constrained equipment. Its exposed pad provides the primary thermal and electrical connection to the PCB. RGMII offers a parallel, high-speed host connection for higher-performance Ethernet designs, whereas RMII reduces host interface pin count and can simplify routing on cost-sensitive or space-constrained platforms.
Typical applications include industrial Ethernet gateways, compact network switches, embedded controllers, serial-to-Ethernet equipment, and communications equipment requiring a copper 10/100 connection. The device is also appropriate for synchronized network equipment requiring iTMP support and systems that need Wake-on-LAN behavior over wired Ethernet.
PCB implementation requires careful high-speed signal routing, a controlled 50-ohm differential transmission path, adequate ground-plane continuity, and clean separation between Ethernet and sensitive analog circuitry. Place the PHY close to the magnetics or network connector, follow the manufacturer's reference-layout guidance, and provide the specified power, decoupling, and crystal or clock components.
This product page consolidates the manufacturer's functional description, package information, interface options, sourcing fields, and drop-in alternatives into an engineering-focused reference. It also provides application guidance and a comparison of documented characteristics for easier design qualification and replacement assessment.
直接替换替代料: VSC8530XMW-04 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: VSC8530XMW-04 (相同外形与封装尺寸) ——差异在于 Energy Efficient Ethernet, Host Interface, Package, Port Count, Product Type.
VSC8530XMW-05
✅ 直接替换📋 参考替代料(不在目录中)
VSC8530XMW-04 规格参数
| Port Count | 1 port |
| Ethernet Data Rate | 10 Mbps and 100 Mbps |
| Physical Layer Standard | 10/100BASE-T copper Ethernet |
| Host Interface | RGMII and RMII |
| Energy Efficient Ethernet | IEEE 802.3az |
| Wake-on-LAN Support | Supported |
| Synchronous Ethernet | iTMP Synchronous Ethernet |
| I/O Logic Compatibility | LVCMOS |
| 电源电压 | 0.95 V or 2.38 V |
| 封装 | 48-pin single-row QFN |
| Package Dimensions | 6 mm x 6 mm |
| Exposed Thermal Pad | Present |
| 安装类型 | Surface mount |
| Temperature Grade | Industrial temperature |
VSC8530XMW-04 6 mm x 6 mm 引脚配置指南
VSC8530XMW-04(6 mm x 6 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: VSC8530XMW-04.
请参阅 数据手册 以查看完整引脚配置。
典型应用
VSC8530XMW-04 适用于 6 应用s: Industrial Ethernet Gateway, Compact Network Switch, Embedded Serial-to-Ethernet Equipment, Synchronized Network Equipment, Remote Monitoring Equipment, Space-Constrained Communications Product.
Industrial Ethernet Gateway
The VSC8530XMW-04 fits an industrial gateway that requires one 10/100BASE-T copper connection while preserving board area for sensing, control, and communications functions. Its RGMII interface supports a parallel host connection to a capable Ethernet controller or switch fabric, while the alternative RMII interface can reduce host-side pin requirements. IEEE 802.3az Energy Efficient Ethernet is useful when the gateway spends substantial time with lightly loaded links. The 6 mm by 6 mm, 48-pin single-row QFN helps limit footprint in space-constrained industrial enclosures. Final qualification should cover the industrial temperature range, isolation strategy, magnetics selection, surge requirements, and the EMC environment at the cable connector.
推荐
Compact Network Switch
The VSC8530XMW-04 can serve as the copper physical layer for a compact 10/100 Ethernet switch port. Its one-channel, 10 Mbps and 100 Mbps architecture maps directly to a Fast Ethernet uplink, while RGMII provides a high-speed parallel interface to the switch fabric. For designs with limited host routing, RMII offers another integration path. The device's small 6 mm by 6 mm QFN-48 package is valuable in managed switches and edge products with dense port layouts. IEEE 802.3az Energy Efficient Ethernet can lower power consumption on lightly used links, although correct operation requires compatible switch firmware and link partners. Designers should preserve uninterrupted ground planes, follow differential-impedance rules, and isolate PHY clocks from noisy switching nodes.
推荐
Embedded Serial-to-Ethernet Equipment
The VSC8530XMW-04 is appropriate for embedded serial-to-Ethernet equipment that needs a wired 10/100 copper connection without adding a large magnetics-and-PHY section to the controller board. The PHY works with an embedded Ethernet controller or switch fabric through RGMII or RMII, allowing system partitioning based on processor I/O availability and timing requirements. Its 48-pin QFN package limits connector-adjacent board area, while LVCMOS support helps align with modern host logic. Wake-on-LAN can support remote maintenance and network-initiated wake behavior in managed equipment. Engineering validation should cover clock tolerance, startup sequencing, cable diagnostics, link negotiation, isolation, and system-level EMC performance at the external RJ45 or industrial connector.
推荐
Synchronized Network Equipment
The VSC8530XMW-04 is suitable for network equipment that benefits from iTMP Synchronous Ethernet capability alongside a standard 10/100 copper link. The manufacturer identifies iTMP Synchronous Ethernet as a feature of the VSC8530-04, allowing designs to explore precise Ethernet timing relationships for synchronization-oriented equipment. Its RGMII and RMII choices let the system designer balance interface performance against pin count and routing complexity. Because synchronization designs are sensitive to clock architecture, jitter, and reference-clock quality, engineers should use the manufacturer's timing diagrams and reference design rather than infer compatibility from the family name. Deployment also requires a network topology and link partner that support the intended synchronization method.
推荐
Remote Monitoring Equipment
The VSC8530XMW-04 can support remote monitoring and control products that need a reliable 10/100BASE-T management connection. Wake-on-LAN provides a useful control feature for equipment expected to remain connected while allowing selective remote activation. The PHY's Energy Efficient Ethernet support can also benefit links that carry intermittent management traffic, while the compact 48-QFN package preserves board area for sensing and actuation electronics. RGMII is suitable when the host controller supports a high-speed parallel interface; RMII may be preferable where connector placement and routing space are more constrained. Product qualification should verify network wake-up behavior through the complete host stack, Ethernet magnetics, cable length, surge protection, and the enclosure's EMC environment.
推荐
Space-Constrained Communications Product
The VSC8530XMW-04 addresses communications products where connector density and PCB area limit the available footprint for copper Ethernet interfaces. Its single-row 48-pin QFN occupies a 6 mm by 6 mm body and includes an exposed pad for board-level thermal and electrical performance. The device supports both RGMII and RMII, allowing the system architect to select the host interface that best fits the processor, switch fabric, and routing density. IEEE 802.3az Energy Efficient Ethernet adds an efficiency option for lightly loaded network links, while Wake-on-LAN supports remote system management. A careful layout must provide a continuous reference plane, controlled differential impedance, short return paths, clean clock distribution, and the required external components identified in the manufacturer reference design.
推荐
推荐产品汇总
工程参考数据: VSC8530XMW-04 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | VSC8530XMW-05 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 48-QFN (6x6) | 48-QFN (6x6) |
| Port Count | 1 channel | 1 channel |
| Ethernet Data Rate | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Supply Voltage | 0.95 V or 2.38 V | 0.95 V or 2.38 V |
关键差异点
- Combines multiple copper Ethernet functions in one compact device (对比 VSC8530XMW-05)
- Matches the VSC8530XMW-05 core physical and data-rate configuration (对比 VSC8530XMW-05)
- Supports both parallel and reduced-pin-count host interfaces (对比 VSC8530XMW-05)
设计说明
Place the PHY close to the Ethernet transformer or integrated magnetics and preserve a continuous ground plane beneath the device and signal route. Follow the manufacturer reference layout for the 48-QFN exposed pad, input and output decoupling, clock source, and differential pairs. Keep the RGMII or RMII host signals away from switching power-conversion nodes and analog sensor circuitry to minimize coupling into the timing-sensitive interface.
Route the copper Ethernet differential pairs as a controlled-impedance pair with matched length and minimal stubs. Provide the magnetics and protection components close to the cable or board connector so transient energy does not propagate into the PHY. Validate the complete channel with the manufacturer-recommended component values and account for connector, magnetics, and PCB effects rather than designing the interface solely from nominal single-ended rise times.
Use separate, well-decoupled supply paths for the core, analog, and digital I/O requirements defined in the manufacturer datasheet. Place the prescribed capacitors at their designated power pins and keep return-current paths short through the exposed pad and ground plane. Check startup sequencing and voltage tolerances before enabling the host interface. Any estimated rail-current and dissipation values should be recalculated from the actual clock, interface, and load operating conditions.
合规信息
The manufacturer product page identifies an industrial-temperature Ethernet PHY, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not included in the available product information.