Microchip Technology

VSC8540XMV-04 - 10/100M Cu PHY | Microchip | Ethernet

MPN: VSC8540XMV-04 ✓ نشط
0.95 V Vdss 68-QFN, 8 mm × 8 mm Package
الحد الأدنى للطلب: 1 |

VSC8540XMV-04 نظرة عامة

Microchip VSC8540XMV-04 is a single-port copper Ethernet PHY designed for space-constrained 10BASE-TX and EtherCAT equipment, with 100 Mbps operation, dual 0.95 V and 2.38 V supply domains, and a 68-QFN 8 mm × 8 mm package. The device also provides Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication, making it suitable for compact industrial and telecom interfaces.

A copper PHY, or physical-layer transceiver, is the integrated circuit that translates logical Ethernet data into signals suitable for twisted-pair cabling. In the hierarchy of network semiconductors, a PHY operates below the Ethernet media-access controller: the MAC organizes frames and protocol access, while the PHY manages the physical signaling, line coding, auto-negotiation, and cable connection. The VSC8540XMV-04 therefore belongs to the Ethernet interface and physical-layer transceiver segment of the broader semiconductor market.

The headline capabilities of this device are its single 10/100 Mbps copper channel, 0.95 V and 2.38 V operating rails, and 68-QFN package. Its 10BASE-TX support targets 10 Mbps legacy networks, while 100BASE-TX operation supports Fast Ethernet links. Energy Efficient Ethernet can reduce power consumption when link traffic is low, and Wake-on-LAN allows a connected system to respond when an appropriate network wake event occurs.

Technical integration centers on the combination of low-power PHY operation, Synchronous Ethernet support, FLF2 status indication, and a compact exposed-pad package. Synchronous Ethernet can help maintain synchronized timing for demanding network equipment, while FLF2 indication provides a hardware status signal for link-fault monitoring. The manufacturer datasheet also identifies compatibility with systems that supply power through the MDI or twisted-pair cable under IEEE 802.3af Clause 33, an important consideration for powered-device designs.

Typical uses include industrial Ethernet controllers, EtherCAT equipment, compact network appliances, telecom equipment, and compact communications systems. Its small 8 mm × 8 mm footprint supports designs where board area is limited, while the feature set helps reduce the need for separate link-management or timing circuitry. System designers should still validate magnetics, termination, power sequencing, thermal performance, and signal-integrity margins against the target network environment.

For PCB implementation, follow the manufacturer’s exposed-pad land pattern, thermal-via, and layout guidance. Keep the PHY supply and ground connections compact, provide the specified bypass capacitance at the device pins, and route high-speed copper PHY signals with continuous references and controlled impedance. Treat the exposed pad as both an electrical connection and a thermal path rather than treating it as an optional ground feature.

This product page organizes the manufacturer’s Ethernet PHY information, package details, sourcing path, replacement analysis, and engineering guidance into one practical reference. It highlights how the VSC8540XMV-04 fits compact copper-networking designs while directing engineers to the manufacturer documentation for complete pin assignments, timing limits, magnetic-component recommendations, and layout constraints.

بدائل مباشرة لـ VSC8540XMV-04 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع VSC8540XMV-04 (نفس عامل الشكل والبصمة) — يختلف في Energy Efficient Ethernet, Product Type, Synchronous Ethernet, EtherCAT Support, Package.

Microchip Technology
Energy Efficient Ethernet: IEEE 802.3az supported
Synchronous Ethernet: SyncE supported
EtherCAT Support: Supported application
قارن مع VSC8540XMV-04 →
Microchip Technology
Energy Efficient Ethernet: EEE supported
Product Type: Single-port Gigabit Ethernet copper PHY
Synchronous Ethernet: SyncE supported
قارن مع VSC8540XMV-04 →

VSC8540XMV-05

✅ بديل مباشر
📦 68-QFN (8x8)
Same 68-QFN 8x8 package and VSC8540 family; revision suffix differs by 1, with functional differences requiring datasheet confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

VSC8541XMV-05

✅ بديل مباشر
📦 68-QFN (8x8)
Same 68-QFN 8x8 copper-PHY package; VSC8541 family differs from VSC8540 by one family step, with protocol and register differences requiring confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

VSC8541XMV-01

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Microchip Technology
📦 68-QFN (8x8)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · 1 port · GMII/RGMII/MII/RMII · EEE supported · Supported · SyncE supported · Integrated

تواصل لمعرفة السعر

عرض ورقة البيانات ←

VSC8540XMV-04 المواصفات

Product Type Single-port copper Ethernet PHY
Supported Data Rates 10 Mbps and 100 Mbps
Ethernet Mode 10BASE-TX and 100BASE-TX
Core Supply Voltage 0.95 V
I/O Supply Voltage 2.38 V
Channel Count 1 copper channel
Energy Efficient Ethernet Supported
Wake-on-LAN Supported
Synchronous Ethernet Supported
FLF2 Indication Supported
EtherCAT Support Supported
العلبة 68-QFN, 8 mm × 8 mm
Exposed Pad Present
Packaging Tray
Powered Ethernet Compatibility IEEE 802.3af Clause 33
Maximum Link Rate 100 Mbps

دليل تكوين أطراف VSC8540XMV-04 68-qfn, 8 mm × 8 mm

تكوين الأطراف لـ VSC8540XMV-04 (حزمة 68-qfn, 8 mm × 8 mm). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 68-qfn, 8 mm × 8 mm لـ VSC8540XMV-04

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ VSC8540XMV-04.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

VSC8540XMV-04 مناسب لـ 6 التطبيقs: Compact Industrial Ethernet Equipment, EtherCAT Interface Equipment, Low-Power Network Appliances, Telecom Network Equipment, Powered Ethernet Devices, Embedded Control and Communication Systems.

🏭

Compact Industrial Ethernet Equipment

The VSC8540XMV-04 fits compact industrial Ethernet equipment that needs a single 10/100 Mbps copper port without allocating a large PHY footprint. Its 68-QFN 8 mm × 8 mm package includes an exposed pad, allowing the device to serve as the physical-layer interface beneath an Ethernet MAC while consuming little board area. The 0.95 V core and 2.38 V I/O supplies suit platforms that already organize low-voltage digital power separately. Industrial designs should pair the PHY with a qualified magnetic device, implement the manufacturer’s exposed-pad and thermal-via pattern, and verify operation across the complete system temperature range.

🌐

EtherCAT Interface Equipment

Microchip identifies the VSC8540 as a PHY suitable for space-constrained EtherCAT equipment, making the VSC8540XMV-04 appropriate for compact master or slave interface designs. The device handles one 10/100 Mbps copper channel and adds EEE, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication to the basic PHY function set. An EtherCAT implementation must still validate the supported physical layer, timing, clocking, and configuration required by the selected network controller. Keep the PHY-to-MAC interface short, follow the recommended magnetics layout, and test cable startup and link behavior under the intended industrial conditions.

🧩

Low-Power Network Appliances

The VSC8540XMV-04 is appropriate for space-constrained network appliances that expose a Fast Ethernet copper port while limiting board area and power. Its single 10/100 Mbps channel avoids allocating circuitry for unused media rates, and Energy Efficient Ethernet provides a mechanism for reducing link power when traffic is light. Wake-on-LAN can support remote activation after a low-power state, while FLF2 indication assists the host with link-fault handling. The system designer should confirm PHY power consumption, sleep behavior, wake timing, and thermal rise in the final enclosure rather than relying on feature names alone.

📡

Telecom Network Equipment

The VSC8540XMV-04 can serve as the copper front end in telecom equipment requiring one 10/100 Mbps Ethernet management or service port. Synchronous Ethernet is a notable benefit for timing-sensitive equipment, while the 0.95 V core rail and 2.38 V I/O rail support integration with systems partitioned into core and interface power domains. The 68-QFN package keeps the PHY compact but requires careful exposed-pad soldering and thermal-path design. Use the manufacturer reference layout and magnetics guidance, and validate conducted emissions, cable reach, auto-negotiation, and synchronization behavior for the deployment environment.

⚡

Powered Ethernet Devices

The VSC8540XMV-04 is relevant to powered-device designs because the manufacturer datasheet identifies compatibility with systems supplying power through the MDI or twisted-pair cable under IEEE 802.3af Clause 33. A copper PHY with a single 10/100 Mbps channel can serve as the network interface in a compact powered endpoint while the surrounding power-delivery circuit handles isolation and negotiation. Implementation requires the correct isolation components, magnetics, and cable-side power-path architecture. Verify the complete power-delivery design against the applicable clause and do not infer that the PHY alone implements every powered-device function.

🔧

Embedded Control and Communication Systems

The VSC8540XMV-04 fits embedded control systems that need deterministic copper networking for configuration, diagnostics, or supervisory traffic. A 10/100 Mbps PHY supports basic management traffic without imposing the footprint or power requirements of a multi-port transceiver. The host processor or communications controller must initialize the PHY correctly, manage reset and clocking, and implement the required auto-negotiation and link-status behavior. Before layout release, cross-check the exposed-pad geometry, supply decoupling, magnetics spacing, and differential-pair routing against the Microchip hardware guidelines, especially where an embedded enclosure limits heat dissipation.

What is the VSC8540XMV-04?
The Microchip VSC8540XMV-04 is a single-port copper Ethernet PHY supporting 10 Mbps and 100 Mbps operation in a 68-QFN 8 mm × 8 mm package. According to the manufacturer product page, the device provides Energy Efficient Ethernet, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication for compact 10BASE-TX and EtherCAT designs.
What are the key specifications of VSC8540XMV-04 that engineers should know?
The VSC8540XMV-04 combines one 10/100 Mbps copper channel, 0.95 V core and 2.38 V I/O supplies, EEE, Wake-on-LAN, Synchronous Ethernet, and FLF2 indication in a 68-QFN package. The manufacturer datasheet identifies 10BASE-TX support and compatibility with powered-device systems operating under IEEE 802.3af Clause 33.
What data rates does VSC8540XMV-04 support?
The VSC8540XMV-04 supports 10 Mbps and 100 Mbps Ethernet rates over copper, corresponding to 10BASE-TX and 100BASE-TX operation. This makes the PHY suitable for Fast Ethernet links as well as legacy 10 Mbps networks. Microchip describes the device as a compact Cu PHY intended for space-constrained industrial and EtherCAT equipment.
Where can I download the VSC8540XMV-04 datasheet PDF?
The VSC8540XMV-04 manufacturer datasheet PDF is available from Microchip at the product document URL listed on this page. It covers the VSC8540-04 device, including electrical characteristics, interface behavior, register information, magnetic-component requirements, and application guidance. Use the manufacturer document for complete pin assignments and implementation details.
Where can I find the VSC8540XMV-04 pinout?
The complete VSC8540XMV-04 pin assignment is presented in the manufacturer datasheet’s pin-description and package diagrams. The device uses a 68-QFN 8 mm × 8 mm package with an exposed pad, so the physical footprint must include thermal-via and solder-pattern requirements. Use the manufacturer pin table when assigning PCB tracks and power connections.
Where can I buy VSC8540XMV-04 online?
The VSC8540XMV-04 can be requested through the Request a Quote form on this page, which supports exact-MPN sourcing and current availability questions. The part is identified as a Microchip 68-QFN Ethernet interface device supplied in tray packaging. Confirm current stock, lot traceability, and delivery scheduling through that request.
What is the price of VSC8540XMV-04?
Current pricing for VSC8540XMV-04 is obtained through the Request a Quote form on this page rather than through a static price table. Submit the exact MPN and required quantity so current pricing, lead time, and order handling can be confirmed. The 68-QFN 8 mm × 8 mm tray package and exact suffix should remain unchanged in the request.
What is the lead time for VSC8540XMV-04?
The current lead time for VSC8540XMV-04 should be confirmed through the Request a Quote form on this page. Lead time can depend on the exact suffix, tray quantity, manufacturing allocation, and shipment destination. For production planning, request a scheduled quantity and include the required delivery date with the inquiry.
Is VSC8540XMV-04 in stock?
Current VSC8540XMV-04 availability is handled through the Request a Quote form on this page. Submit the exact MPN, required quantity, and target delivery date to obtain a current response. Because availability can change by package quantity and supply channel, the quote request is the appropriate route for an actionable inventory confirmation.
What is the difference between VSC8540XMV-04 and VSC8540XMV-05?
Both parts are identified in the same Microchip VSC8540 Ethernet PHY family and use the 68-QFN 8 mm × 8 mm package, but the final revision suffix indicates different device versions. The manufacturer documentation should be used to confirm any firmware, register, or qualification changes before substituting XMV-05 for XMV-04. PCB compatibility does not by itself prove functional equivalence.
When should I choose VSC8540XMV-04 over VSC8541XMV-05?
Choose VSC8540XMV-04 when a design specifically targets the VSC8540 family and its documented 10/100 Mbps copper-PHY feature set. Consider VSC8541XMV-05 only after comparing the manufacturer data for protocol support, register behavior, timing, and application requirements. Both use a 68-QFN format, but package similarity should not replace a full silicon-level qualification.
Is VSC8540XMV-04 suitable for EtherCAT equipment?
The VSC8540XMV-04 is suitable for EtherCAT equipment when the complete system meets Microchip’s specified interface, timing, magnetic-component, and layout requirements. Microchip specifically describes the VSC8540 as a Cu PHY for space-constrained 10BASE-TX and EtherCAT applications. Validate the selected magnetic device, cable reach, timing budget, and industrial temperature requirements in the final design.
What can replace VSC8540XMV-04?
A valid replacement must preserve the 68-QFN footprint, pin assignments, 10/100 Mbps copper operation, 0.95 V and 2.38 V supply arrangement, and required management features. The documented same-family options include VSC8540XMV-05 and VSC8541XMV-05, while VSC8541XMV-01 is another closely related family member. Confirm protocol and register compatibility before replacement.
Is VSC8541XMV-05 a drop-in replacement for VSC8540XMV-04?
The VSC8541XMV-05 is a same-package candidate for VSC8540XMV-04 because both are associated with the 68-QFN 8 mm × 8 mm Ethernet PHY family. A final drop-in decision still requires checking pin assignment, power sequencing, supported clocks, protocol behavior, magnetic-device recommendations, and software or register changes against the manufacturer documentation.
What is the best equivalent for VSC8540XMV-04?
The best equivalent is the device that matches the required footprint, pinout, electrical rails, data rates, interface timing, and EtherCAT or industrial behavior rather than merely sharing the VSC85xx family name. VSC8540XMV-05 is the closest revision-level candidate in the available documentation. Confirm qualification and application requirements with Microchip before committing to a substitution.

بيانات مرجعية هندسية لـ VSC8540XMV-04 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the VSC8540XMV-04 when the design specifically requires Microchip’s VSC8540 single-port 10/100 Mbps copper PHY and its documented EEE, Wake-on-LAN, Synchronous Ethernet, and FLF2 features. Its 68-QFN 8 mm × 8 mm exposed-pad package is appropriate for space-constrained industrial, telecom, EtherCAT, and powered-Ethernet products. Consider VSC8540XMV-05 first when an available later revision satisfies the required qualification and register behavior, but review the manufacturer revision information before approving it. Evaluate VSC8541XMV-05 or VSC8541XMV-01 when their family-specific protocol or platform features provide a concrete design benefit and the manufacturer confirms interface compatibility. A shared 68-QFN outline is not enough for a safe drop-in decision; verify pin assignments, voltage domains, clocking, timing, magnetics, software support, and lifecycle requirements before substitution.

المقارنة مع البدائل

المعامل هذا المنتج VSC8540XMV-05 VSC8541XMV-05 VSC8541XMV-01
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8) 68-QFN (8x8)

أبرز الفروقات

  • Purpose-built compact single-port copper PHY (مقابلVSC8541XMV-05)
  • Direct VSC8540-family revision option (مقابلVSC8540XMV-05)
  • Family-level resource availability (مقابلVSC8541XMV-01)

ملاحظات التصميم

Implement the VSC8540XMV-04 as a complete 68-QFN exposed-pad layout rather than treating the pad as optional. Follow the manufacturer land pattern, place the input and output bypass capacitors close to their associated supply pins, and provide adequate thermal vias beneath the exposed pad. Confirm pad and via geometry against the current Microchip package drawing before fabrication because exposed-pad solder volume strongly affects assembly yield and thermal performance.

Route the PHY-to-MAC and PHY-to-magnetics interfaces as controlled-impedance differential pairs with continuous reference planes and minimal stubs. Keep the magnetics and high-speed copper connections away from noisy switching nodes and maintain the spacing recommended by the manufacturer. Avoid placing test pads or vias in the sensitive differential paths unless their effect on impedance and return loss has been evaluated.

Plan the 0.95 V core and 2.38 V I/O rails as separate, properly sequenced supply domains. Confirm the permitted startup and shutdown relationship in the manufacturer datasheet before assigning power states. Use the specified local bypass capacitance and verify that the exposed pad and thermal-via structure provide adequate heat spreading for the maximum expected operating temperature.

Do not assume that a matching QFN package establishes drop-in compatibility. Before replacing VSC8540XMV-04 with another revision, compare pin names, supply sequencing, clock requirements, register behavior, supported protocols, magnetic-device recommendations, and reset timing. Also verify the operating-temperature grade and any qualification requirements applicable to industrial, telecom, or EtherCAT equipment.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer datasheet identifies compatibility with powered-device systems under IEEE 802.3af Clause 33. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the current manufacturer product documentation or declaration of compliance.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

VSC8540XMV-04 datasheet VSC8540XMV-04 datasheet pdf VSC8540XMV-04 pinout VSC8540XMV-04 equivalent VSC8540XMV-04 replacement VSC8540XMV-04 vs VSC8540XMV-05 VSC8540XMV-04 vs VSC8541XMV-05 VSC8540XMV-04 footprint VSC8540XMV-04 application circuit VSC8540XMV-04 price VSC8540XMV-04 stock Microchip VSC8540XMV-04

المكونات والمصطلحات ذات الصلة

Microchip Technology VSC8540XMV-04 VSC8540XMV-05 VSC8541XMV-05 VSC8541XMV-01 Ethernet PHY physical-layer transceiver copper Ethernet Ethernet interface IC 10BASE-TX 100BASE-TX 10 Mbps 100 Mbps Energy Efficient Ethernet Wake-on-LAN Synchronous Ethernet FLF2 indication EtherCAT IEEE 802.3af Clause 33 68-QFN QFN family surface mount exposed pad 0.95 V core supply 2.38 V I/O supply
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر