WM8850GEFL/V - 24-Bit HDA Audio Codec | Cirrus Logic
MPN: WM8850GEFL/V ✓ نشطWM8850GEFL/V نظرة عامة
An audio codec is an interface IC that converts digital audio data between a digital audio bus and an analog or mixed-signal audio subsystem. In the product hierarchy, the WM8850GEFL/V is an audio codec within interface ICs and a member of the broader semiconductor category. HDA means high-definition audio, while S/PDIF is a digital consumer audio interface commonly used for inter-component digital audio links. These interfaces distinguish the WM8850GEFL/V from conventional low-power analog audio amplifiers.
The manufacturer documentation identifies the device as a multi-channel high-definition audio codec. Its 24-bit audio format, HDA support, and S/PDIF support make it relevant to consumer electronics, portable media equipment, and embedded audio systems. The 48-QFN package offers a compact solution for board layouts where component density and short digital interconnect paths are important. The 7 x 7 mm body also requires careful thermal and electrical layout to preserve signal and power integrity.
The WM8850GEFL/V combines a digital audio interface role with a multi-channel codec architecture. HDA connectivity allows the codec to participate in a host-oriented digital audio system, while S/PDIF provides a separate digital audio connection option. Because the device is primarily a codec, its implementation depends on correct clocking, digital interface configuration, power sequencing, analog routing, and host-driver or firmware support. Those system-level details must be confirmed in the manufacturer datasheet before schematic release.
Typical uses include multi-channel digital audio equipment, high-definition audio playback and recording systems, portable consumer devices, and embedded multimedia products. A host processor can exchange digital audio through HDA, while S/PDIF can support an external digital audio link when required. The exact supported sample rates, codec functions, microphone paths, and physical signal assignments are defined by the manufacturer datasheet and should be checked against the intended system architecture.
Layout should place decoupling capacitors close to the device power pins, route clocks and data signals over continuous reference planes, and keep sensitive analog and digital return paths separated where practical. The exposed thermal pad in a QFN package must be connected according to the datasheet land pattern and thermal guidance. Do not assume a generic QFN pad pattern because pad dimensions, via arrangement, and pin numbering must match the 48-QFN package drawing.
This product record combines the exact manufacturer-facing part number, interface and package identifiers, distributor availability references, and the available substitute information in one engineering-focused view. It also distinguishes verified drop-in candidates from parts that are only functionally similar, helping design engineers avoid assuming that a shared audio function or similar package proves pin-level compatibility.
بدائل مباشرة لـ WM8850GEFL/V — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع WM8850GEFL/V (نفس عامل الشكل والبصمة) — يختلف في Digital Audio Interface, Package Type.
WM8850GEFL/RV
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←WM8850GEFL/V الحدود القصوى والخصائص الكهربائية
| Product Type | Multi-channel high-definition audio codec |
| Audio Resolution | 24 bit |
| Digital Audio Interface | HDA |
| Digital Audio Output Interface | S/PDIF |
| Package Type | 48-QFN (7 x 7 mm) |
| نوع التركيب | Surface mount |
| Channel Configuration | Multi-channel |
| Device Category | Audio interface codec |
| Manufacturer | Cirrus Logic |
دليل تكوين أطراف WM8850GEFL/V 48-qfn (7 x 7 mm)
تكوين الأطراف لـ WM8850GEFL/V (حزمة 48-qfn (7 x 7 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ WM8850GEFL/V.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
WM8850GEFL/V مناسب لـ 6 التطبيقs: Host-Connected High-Definition Audio, Multi-Channel Digital Audio Equipment, Portable Media Player Audio, Digital Audio Recording System, Consumer Audio with S/PDIF Output, Embedded Multimedia and Signage.
Host-Connected High-Definition Audio
The WM8850GEFL/V fits a host-connected audio design because its 24-bit high-definition audio codec and HDA interface can carry digital audio between a system processor and the device's codec section. The part is appropriate when the host already supports the required digital format, clocking method, and driver configuration. Designers should preserve short HDA traces, continuous reference planes, and properly placed decoupling around the 48-QFN 7 x 7 mm device. Confirm the exact supported sample rates, master-clock requirements, and supported codec functions in the manufacturer datasheet before finalizing the host interface.
موصى به
Multi-Channel Digital Audio Equipment
The multi-channel architecture and 24-bit resolution make the WM8850GEFL/V a candidate for digital audio equipment that must move multiple channels through a compact audio interface. HDA provides the principal host-oriented digital path, while S/PDIF can add a compatible digital connection when the external device supports it. The implementation must account for clock-domain compatibility, signal routing, and the specific channel assignments listed in the manufacturer datasheet. A compact 48-QFN 7 x 7 mm package also helps reduce board area while requiring disciplined exposed-pad and thermal management.
موصى به
Portable Media Player Audio
The WM8850GEFL/V can support a portable media-player audio subsystem when the product requires a dedicated 24-bit digital audio interface in a compact package. HDA allows the application processor to exchange digital audio data without requiring the codec to perform the host-side media processing. S/PDIF is useful when the design includes a digital-audio accessory or internal output path. Because battery-powered equipment is sensitive to board area and heat, engineers should review the complete operating current and thermal limits in the manufacturer document and verify them against the intended playback and idle conditions.
موصى به
Digital Audio Recording System
The 24-bit interface format makes WM8850GEFL/V relevant to digital recording systems that transfer audio through HDA and may also use S/PDIF for clocked digital transmission. The codec can sit between a digital host and its supported analog audio paths, allowing capture, playback, or routing functions to be configured according to the device architecture. Accurate implementation depends on selecting supported clocks, configuring the required channels, and observing input and output timing. Signal-integrity measures should include short digital routes, continuous return paths, and analog input layout that follows the manufacturer's recommended application circuit.
موصى به
Consumer Audio with S/PDIF Output
The WM8850GEFL/V suits consumer audio products that require both HDA host connectivity and an S/PDIF digital output path. The HDA connection supports integration with a main system processor, while S/PDIF can feed a compatible digital amplifier, decoder, or recording accessory. A successful design must confirm that the external S/PDIF device accepts the codec's supported format, sample rate, and polarity. Route the S/PDIF output as a controlled digital signal, maintain the required clock relationship, and place supply and ground connections according to the manufacturer package guidance.
موصى به
Embedded Multimedia and Signage
The WM8850GEFL/V can serve as the audio-interface element in an embedded multimedia or digital-signage system that processes sound through a host processor. Its 24-bit HDA connection supports digital audio integration, while S/PDIF provides an option for an external digital-audio link. The compact 48-QFN 7 x 7 mm package is useful where the main challenge is fitting a complete audio subsystem into a compact board. Confirm long-term operating-temperature requirements, clock stability, firmware configuration, and input or output channel requirements because these details are not established by the distributor summaries.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ WM8850GEFL/V — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | WM8850GEFL/RV |
|---|---|---|
| Package | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) |
| Brand | Cirrus Logic | Cirrus Logic |
| Audio Resolution | 24 bit | Same core specifications |
| HDA Interface | Supported | Same core specifications |
| S/PDIF Interface | Supported | Same core specifications |
| Channel Configuration | Multi-channel | Same core specifications |
| Codec Type | Multi-channel high-definition audio codec | Same core specifications |
| Documented Distinction | Base order suffix /V | Reel packaging or minor revision |
أبرز الفروقات
- Combines HDA and S/PDIF in one multi-channel codec (مقابلWM8850GEFL/RV)
- 24-bit digital audio format (مقابلWM8850GEFL/RV)
- Compact 48-QFN package (مقابلWM8850GEFL/RV)
ملاحظات التصميم
Use the manufacturer 48-QFN 7 x 7 mm land pattern rather than a generic QFN footprint. Confirm exposed-pad dimensions, pad numbering, mask clearance, and via recommendations against the package drawing. Place the required input and output capacitors adjacent to their associated pins, and provide a low-impedance ground connection beneath the exposed pad. Incorrect exposed-pad treatment can affect soldering, thermal performance, and electrical return behavior.
Route HDA data, S/PDIF, and clock signals over continuous reference planes with short point-to-point paths and no unnecessary stubs. Maintain the clock relationship required by the supported digital-audio format, and avoid routing these signals adjacent to switching-regulator nodes or high-current return paths. Where analog signal paths are present, use the manufacturer reference layout to control coupling and return-current discontinuity.
Do not treat WM8850GEFL/RV as an unconditional substitute without checking its suffix-specific ordering information and revision notes. The documented same-core, same-package relationship makes it the closest drop-in candidate, but reel configuration or a minor silicon revision can affect procurement traceability. Before schematic approval, verify supported sample rates, clock requirements, exposed-pad treatment, programming sequence, and host-driver compatibility in the manufacturer documentation.
معلومات الامتثال
The available product references do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the WM8850GEFL/V is an audio codec rather than an automotive-qualified device.