Cirrus Logic Inc.

WM8850GEFL/V - 24-Bit HDA Audio Codec | Cirrus Logic

MPN: WM8850GEFL/V ✓ Nakahanda
48-QFN (7 x 7 mm) Package
MOQ: 1 |

WM8850GEFL/V Ulas

The Cirrus Logic WM8850GEFL/V is a 24-bit high-definition audio codec with HDA and S/PDIF interfaces, packaged in a 48-QFN 7 x 7 mm package. It is designed for audio systems requiring digital audio conversion, digital interface support, and a multi-channel codec function in a compact surface-mount package.

An audio codec is an interface IC that converts digital audio data between a digital audio bus and an analog or mixed-signal audio subsystem. In the product hierarchy, the WM8850GEFL/V is an audio codec within interface ICs and a member of the broader semiconductor category. HDA means high-definition audio, while S/PDIF is a digital consumer audio interface commonly used for inter-component digital audio links. These interfaces distinguish the WM8850GEFL/V from conventional low-power analog audio amplifiers.

The manufacturer documentation identifies the device as a multi-channel high-definition audio codec. Its 24-bit audio format, HDA support, and S/PDIF support make it relevant to consumer electronics, portable media equipment, and embedded audio systems. The 48-QFN package offers a compact solution for board layouts where component density and short digital interconnect paths are important. The 7 x 7 mm body also requires careful thermal and electrical layout to preserve signal and power integrity.

The WM8850GEFL/V combines a digital audio interface role with a multi-channel codec architecture. HDA connectivity allows the codec to participate in a host-oriented digital audio system, while S/PDIF provides a separate digital audio connection option. Because the device is primarily a codec, its implementation depends on correct clocking, digital interface configuration, power sequencing, analog routing, and host-driver or firmware support. Those system-level details must be confirmed in the manufacturer datasheet before schematic release.

Typical uses include multi-channel digital audio equipment, high-definition audio playback and recording systems, portable consumer devices, and embedded multimedia products. A host processor can exchange digital audio through HDA, while S/PDIF can support an external digital audio link when required. The exact supported sample rates, codec functions, microphone paths, and physical signal assignments are defined by the manufacturer datasheet and should be checked against the intended system architecture.

Layout should place decoupling capacitors close to the device power pins, route clocks and data signals over continuous reference planes, and keep sensitive analog and digital return paths separated where practical. The exposed thermal pad in a QFN package must be connected according to the datasheet land pattern and thermal guidance. Do not assume a generic QFN pad pattern because pad dimensions, via arrangement, and pin numbering must match the 48-QFN package drawing.

This product record combines the exact manufacturer-facing part number, interface and package identifiers, distributor availability references, and the available substitute information in one engineering-focused view. It also distinguishes verified drop-in candidates from parts that are only functionally similar, helping design engineers avoid assuming that a shared audio function or similar package proves pin-level compatibility.

Mga alternatibo na pwedeng ilagay na WM8850GEFL/V — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok WM8850GEFL/V (parehas na form factor at footprint) — pagkakaiba sa Digital Audio Interface, Package Type.

Cirrus Logic Inc.
Digital Audio Interface: HDA and S/PDIF
Package Type: 48-pin WFQFN with exposed pad

WM8850GEFL/RV

✅ Drop-In
Cirrus Logic Inc.
📦 48-QFN (7 x 7 mm)
24 bit · 4 channels · 6 channels · 3 stereo DACs · Up to 6 channels for 5.1-channel audio · HDA and S/PDIF · Intel High Definition Audio specification revision 1.0 · 48 kHz

Magkontak para sa presyo

Tingnan ang Datasheet →

WM8850GEFL/V Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Multi-channel high-definition audio codec
Audio Resolution 24 bit
Digital Audio Interface HDA
Digital Audio Output Interface S/PDIF
Package Type 48-QFN (7 x 7 mm)
Uri ng Pagpapasok Surface mount
Channel Configuration Multi-channel
Device Category Audio interface codec
Manufacturer Cirrus Logic

Gabay sa Pin Configuration ng WM8850GEFL/V 48-qfn (7 x 7 mm)

Pin configuration para sa WM8850GEFL/V (48-qfn (7 x 7 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 48-qfn (7 x 7 mm) package para sa WM8850GEFL/V

Wala ng detalyadong pinout data na magagamit para sa WM8850GEFL/V.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

WM8850GEFL/V ay nararapat para sa 6 aplikasyons: Host-Connected High-Definition Audio, Multi-Channel Digital Audio Equipment, Portable Media Player Audio, Digital Audio Recording System, Consumer Audio with S/PDIF Output, Embedded Multimedia and Signage.

🖥️

Host-Connected High-Definition Audio

The WM8850GEFL/V fits a host-connected audio design because its 24-bit high-definition audio codec and HDA interface can carry digital audio between a system processor and the device's codec section. The part is appropriate when the host already supports the required digital format, clocking method, and driver configuration. Designers should preserve short HDA traces, continuous reference planes, and properly placed decoupling around the 48-QFN 7 x 7 mm device. Confirm the exact supported sample rates, master-clock requirements, and supported codec functions in the manufacturer datasheet before finalizing the host interface.

🎧

Multi-Channel Digital Audio Equipment

The multi-channel architecture and 24-bit resolution make the WM8850GEFL/V a candidate for digital audio equipment that must move multiple channels through a compact audio interface. HDA provides the principal host-oriented digital path, while S/PDIF can add a compatible digital connection when the external device supports it. The implementation must account for clock-domain compatibility, signal routing, and the specific channel assignments listed in the manufacturer datasheet. A compact 48-QFN 7 x 7 mm package also helps reduce board area while requiring disciplined exposed-pad and thermal management.

📱

Portable Media Player Audio

The WM8850GEFL/V can support a portable media-player audio subsystem when the product requires a dedicated 24-bit digital audio interface in a compact package. HDA allows the application processor to exchange digital audio data without requiring the codec to perform the host-side media processing. S/PDIF is useful when the design includes a digital-audio accessory or internal output path. Because battery-powered equipment is sensitive to board area and heat, engineers should review the complete operating current and thermal limits in the manufacturer document and verify them against the intended playback and idle conditions.

🎙️

Digital Audio Recording System

The 24-bit interface format makes WM8850GEFL/V relevant to digital recording systems that transfer audio through HDA and may also use S/PDIF for clocked digital transmission. The codec can sit between a digital host and its supported analog audio paths, allowing capture, playback, or routing functions to be configured according to the device architecture. Accurate implementation depends on selecting supported clocks, configuring the required channels, and observing input and output timing. Signal-integrity measures should include short digital routes, continuous return paths, and analog input layout that follows the manufacturer's recommended application circuit.

🔊

Consumer Audio with S/PDIF Output

The WM8850GEFL/V suits consumer audio products that require both HDA host connectivity and an S/PDIF digital output path. The HDA connection supports integration with a main system processor, while S/PDIF can feed a compatible digital amplifier, decoder, or recording accessory. A successful design must confirm that the external S/PDIF device accepts the codec's supported format, sample rate, and polarity. Route the S/PDIF output as a controlled digital signal, maintain the required clock relationship, and place supply and ground connections according to the manufacturer package guidance.

📺

Embedded Multimedia and Signage

The WM8850GEFL/V can serve as the audio-interface element in an embedded multimedia or digital-signage system that processes sound through a host processor. Its 24-bit HDA connection supports digital audio integration, while S/PDIF provides an option for an external digital-audio link. The compact 48-QFN 7 x 7 mm package is useful where the main challenge is fitting a complete audio subsystem into a compact board. Confirm long-term operating-temperature requirements, clock stability, firmware configuration, and input or output channel requirements because these details are not established by the distributor summaries.

What is the Cirrus Logic WM8850GEFL/V?
The Cirrus Logic WM8850GEFL/V is a 24-bit, multi-channel high-definition audio codec with HDA and S/PDIF digital audio interfaces. According to the manufacturer datasheet listing, it is packaged in a 48-QFN 7 x 7 mm package. It is intended for systems that require an integrated audio interface function rather than a standalone analog output amplifier. The exact codec architecture, supported clocking, and channel routing should be confirmed from the manufacturer pin-description and feature tables before design release.
What interfaces does the WM8850GEFL/V support?
The WM8850GEFL/V supports HDA and S/PDIF, as identified in the manufacturer datasheet listing and distributor specifications. HDA provides a high-definition digital audio connection for host-oriented embedded audio systems, while S/PDIF provides a digital audio interface for compatible consumer and digital-audio equipment. These interfaces support digital signal transport, but their usable clocking, format, and routing options must be checked in the datasheet for the final host processor and external audio device.
What package does WM8850GEFL/V use?
The WM8850GEFL/V uses a 48-QFN package measuring 7 x 7 mm. The manufacturer listing identifies the package as 48-QFN, while the distributor description also states 7 x 7 mm. Use the manufacturer land-pattern drawing for pad dimensions, exposed-pad geometry, solder-mask clearance, and via placement. A generic 48-QFN footprint should not be substituted without checking the mechanical drawing and pin map.
Where can I download the WM8850GEFL/V datasheet PDF?
The WM8850GEFL/V datasheet PDF is available through the Wolfson Microelectronics datasheet listing and the Cirrus Logic datasheet index identified for this part. The manufacturer document describes the part as a multi-channel high-definition audio codec. Use the manufacturer document as the authoritative source for pin assignments, electrical limits, clocking, register programming, and recommended application circuits. Do not infer missing pin functions or electrical limits from distributor summaries.
Where can I find the WM8850GEFL/V pinout?
The WM8850GEFL/V pinout is located in the pin-description table of the manufacturer datasheet for the 48-QFN 7 x 7 mm package. The available product references identify the package and pin count but do not expose a complete numbered pin table. Before routing a PCB, map every power, ground, clock, data, and control connection to the manufacturer pin-description table. Pay particular attention to exposed-pad and no-connect treatment.
Is the WM8850GEFL/V a drop-in replacement for WM8850GEFL/RV?
The WM8850GEFL/RV is the only identified WM8850GEFL/V substitute with the same stated core specifications and package, making it the closest documented drop-in candidate. The reported difference concerns reel packaging or a minor revision rather than the core codec function. A board-level substitution should still confirm the suffix-specific ordering information, pin mapping, exposed-pad requirements, and device revision against the manufacturer documentation before production use.
What is the best drop-in replacement for WM8850GEFL/V?
WM8850GEFL/RV is the best documented drop-in replacement candidate for WM8850GEFL/V because it has the same core specifications and package, with the cited difference limited to reel packaging or a minor revision. No other candidate in the substitute search was established as both pin-to-pin compatible and parametrically equivalent. Treat the replacement as a board-level reuse only after checking the exact suffix, package drawing, pin assignments, and any revision-dependent behavior.
Are WM8850GEFL/V and WM8850GEFL/RV electrically identical?
WM8850GEFL/RV is reported to have the same core specifications and package as WM8850GEFL/V, with a possible difference in reel packaging or minor revision. The documented channel and interface configuration therefore remains the closest documented match. Minor revisions can potentially affect firmware or documentation details, so production engineers should compare the manufacturer ordering table, datasheet revision notes, and exposed-pad land pattern rather than relying on suffix similarity alone.
When should I choose WM8850GEFL/V over another audio codec?
Choose WM8850GEFL/V when the design requires a 24-bit multi-channel audio codec with both HDA and S/PDIF interfaces in a 48-QFN 7 x 7 mm package. It is a practical choice when the host system already supports the required digital-audio formats and clocking arrangement. Select another codec when its DAC or ADC performance, sample-rate coverage, microphone features, physical pinout, or host-driver support better matches the product architecture.
Is WM8850GEFL/V suitable for a multi-channel audio system?
The WM8850GEFL/V is suitable for evaluating a multi-channel digital-audio system because the manufacturer describes it as a multi-channel high-definition audio codec. Its 24-bit format and HDA interface support digital host connectivity, while S/PDIF provides an additional digital link option. Actual implementation depends on the number of required input and output paths, supported sample rates, clock architecture, and signal routing listed in the manufacturer datasheet.
WM8850GEFL/V vs WM8850GEFL/RV: which should be selected?
WM8850GEFL/V and WM8850GEFL/RV share the same documented core specifications and package, so either can fit the same general codec-board architecture when suffix-specific behavior is confirmed. The WM8850GEFL/RV reference identifies reel packaging or a minor revision as the possible distinction. Compare the manufacturer ordering information and revision notes before substitution, especially for programs requiring a specific silicon revision, programmed behavior, or approved supplier configuration.
What is the difference between WM8850GEFL/V and WM8850GEFL/RV?
The documented difference between WM8850GEFL/V and WM8850GEFL/RV is reel packaging or a minor revision; both are described as having the same core specifications and package. No core channel-count, bit-depth, or interface difference is identified in the substitute information. Engineers should still verify the suffix-specific reel orientation, shipping configuration, and any revision notes in the manufacturer product documentation before approving either ordering code.
What are the key specifications of WM8850GEFL/V that engineers should know?
The key documented WM8850GEFL/V specifications are 24-bit audio resolution, multi-channel codec operation, HDA and S/PDIF interfaces, and a 48-QFN 7 x 7 mm package. These features position the part for host-connected high-definition audio systems. Supply voltage, sample-rate limits, DAC and ADC performance, and operating-temperature details must be taken from the manufacturer datasheet because distributor summaries do not state those values comprehensively.
How should I design the PCB around the WM8850GEFL/V?
Design the PCB around the manufacturer 48-QFN land pattern, placing input and output decoupling capacitors close to their corresponding pins and providing the exposed thermal pad exactly as specified. Route HDA, S/PDIF, and clock signals over continuous planes with short return paths, and keep sensitive analog routing away from noisy digital and switching paths. Verify via-in-pad requirements, mask clearances, solder mask, and assembly tolerances against the package drawing.
Where can I buy WM8850GEFL/V and request current availability?
Use the Request a Quote form on this page to request the current price, stock position, manufacturer lead time, and order quantity for WM8850GEFL/V. The part is currently listed in distributor results as an audio interface codec in a 48-QFN 7 x 7 mm package. Because inventory and commercial terms can change rapidly, request an updated quotation rather than relying on an old catalog figure or an unconfirmed stock statement.

Impormasyon ng Talumpati sa Engineering for WM8850GEFL/V — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose WM8850GEFL/V for a 24-bit multi-channel audio design that requires both HDA and S/PDIF and uses a 48-QFN 7 x 7 mm footprint. Choose WM8850GEFL/RV when its reel configuration or revision is preferred by procurement or manufacturing; the documented core specifications and package are unchanged, but suffix-specific ordering details should still be checked. Other audio codecs in the Cirrus Logic portfolio may offer different channel counts, converter performance, clocking, or package options, so they should be selected only when their pinout and electrical performance align with the system requirements. Because the WM8850 family is specialized for digital-audio integration, choose a different part when the design needs features not documented for the WM8850, such as a different DAC architecture, microphone configuration, or supported sample-rate range.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto WM8850GEFL/RV
Package 48-QFN (7 x 7 mm) 48-QFN (7 x 7 mm)
Brand Cirrus Logic Cirrus Logic
Audio Resolution 24 bit Same core specifications
HDA Interface Supported Same core specifications
S/PDIF Interface Supported Same core specifications
Channel Configuration Multi-channel Same core specifications
Codec Type Multi-channel high-definition audio codec Same core specifications
Documented Distinction Base order suffix /V Reel packaging or minor revision

Pangunahing mga Pagkakaiba

  • Combines HDA and S/PDIF in one multi-channel codec (kumpara saWM8850GEFL/RV)
  • 24-bit digital audio format (kumpara saWM8850GEFL/RV)
  • Compact 48-QFN package (kumpara saWM8850GEFL/RV)

Talaan ng Disenyo

Use the manufacturer 48-QFN 7 x 7 mm land pattern rather than a generic QFN footprint. Confirm exposed-pad dimensions, pad numbering, mask clearance, and via recommendations against the package drawing. Place the required input and output capacitors adjacent to their associated pins, and provide a low-impedance ground connection beneath the exposed pad. Incorrect exposed-pad treatment can affect soldering, thermal performance, and electrical return behavior.

Route HDA data, S/PDIF, and clock signals over continuous reference planes with short point-to-point paths and no unnecessary stubs. Maintain the clock relationship required by the supported digital-audio format, and avoid routing these signals adjacent to switching-regulator nodes or high-current return paths. Where analog signal paths are present, use the manufacturer reference layout to control coupling and return-current discontinuity.

Do not treat WM8850GEFL/RV as an unconditional substitute without checking its suffix-specific ordering information and revision notes. The documented same-core, same-package relationship makes it the closest drop-in candidate, but reel configuration or a minor silicon revision can affect procurement traceability. Before schematic approval, verify supported sample rates, clock requirements, exposed-pad treatment, programming sequence, and host-driver compatibility in the manufacturer documentation.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product references do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the WM8850GEFL/V is an audio codec rather than an automotive-qualified device.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

WM8850GEFL/V datasheet WM8850GEFL/V pinout WM8850GEFL/V datasheet pdf WM8850GEFL/V specifications WM8850GEFL/V 48-QFN WM8850GEFL/V 24 bit codec WM8850GEFL/V HDA S/PDIF WM8850GEFL/V equivalent WM8850GEFL/V replacement WM8850GEFL/V vs WM8850GEFL/RV Cirrus Logic WM8850GEFL/V WM8850GEFL/V price WM8850GEFL/V stock WM8850GEFL/V application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Cirrus Logic Wolfson Microelectronics WM8850GEFL/V WM8850GEFL/RV WM8860GEFL/V WM8569SEDS/V WM8234GEFL/V WM8985CGEFL WM8963ECSN/R WM8944BECS/R WM1811GECS/R WM9001GEFL/R audio codec interface IC high-definition audio HDA S/PDIF 24-bit audio multi-channel audio 48-QFN QFN package family surface-mount package digital audio interface RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ