Cirrus Logic Inc.

WM8962ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic

MPN: WM8962ECSN/R ✓ نشط
49-WLCSP Package
الحد الأدنى للطلب: 1 |

WM8962ECSN/R نظرة عامة

The Cirrus Logic WM8962ECSN/R is a 24-bit stereo audio codec with I2C and SPI control interfaces, audio-enhancement DSP, and a 49-WLCSP package measuring 3.59 mm by 3.98 mm. It combines digital-to-analog and analog-to-digital conversion in a compact surface-mount package intended for audio processing and signal-chain designs.

An audio codec is an interface IC that converts digital audio data into analog signals and analog sound signals into digital data. As a stereo codec, the WM8962ECSN/R handles two audio channels. Its 24-bit data resolution supports high-resolution audio architectures, while the integrated audio-enhancement DSP provides processing functions within the same device rather than requiring a separate external processor for supported use cases.

The WM8962ECSN/R supports both I2C and SPI control buses, giving the host processor a choice of communication methods. I2C is useful in compact systems where pin count and wiring simplicity are priorities, while SPI can provide a different host-interface tradeoff when clocking and data-transfer characteristics suit the application. The exact register implementation, supported audio formats, and control sequence should be confirmed in the manufacturer datasheet.

The physical package is a 49-WLCSP with a stated body size of 3.59 mm by 3.98 mm. Other manufacturer-listing data describes the package as PBGA49 or WCSP-49, approximately 3.60 mm by 3.90 mm, with 0.50 mm pitch, 0.70 mm height, MO-211C construction, and lead-free construction. These dimensions make the device suitable for compact portable and embedded audio products where board area is tightly constrained.

Typical design environments include portable media devices, smart audio endpoints, headset and microphone signal chains, multimedia appliances, and embedded systems requiring stereo conversion. System-level success depends on correct analog input and output routing, suitable decoupling, clean power rails, an appropriately designed clock source, and layout that separates sensitive audio signals from digital switching activity.

PCB implementation should follow the manufacturer land pattern and pin-assignment table exactly. Place input and output capacitors adjacent to their relevant device pins, provide a continuous ground reference, and keep high-speed digital clock and control routing away from microphone or line-level analog inputs. Validate the assembled design for channel crosstalk, idle-channel noise, clock jitter sensitivity, and start-up behavior.

This product page consolidates the confirmed package, interface, resolution, and sourcing information while distinguishing documented facts from details that must be checked against the current manufacturer datasheet. It also identifies same-brand stereo-codec alternatives that require explicit pin, feature, and sample-rate validation before being treated as drop-in replacements.

بدائل مباشرة لـ WM8962ECSN/R — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع WM8962ECSN/R (نفس عامل الشكل والبصمة) — يختلف في Package Type, Package Dimensions, Product Type.

Cirrus Logic Inc.
Package Type: 49-CSP
Package Dimensions: 3.6 mm × 3.9 mm
Cirrus Logic Inc.
Package Type: 49-ball WLCSP
Product Type: Stereo audio interface and codec

WM8962BECSN/R

✅ بديل مباشر
Cirrus Logic Inc.
📦 49-WLCSP
Stereo audio codec · 24 bit · I2C and SPI · 1.7 V to 2.0 V · 8 kHz to 96 kHz · -40 °C to +85 °C · 49-CSP · 3.6 mm × 3.9 mm

تواصل لمعرفة السعر

عرض ورقة البيانات ←

WM8960ECSN/R

✅ بديل مباشر
📦 49-WLCSP
24-bit stereo interface is retained, but maximum sampling rate is 48 kHz instead of 96 kHz, a 50% reduction.

📋 بديل مرجعي (غير موجود في الكتالوج)

WM8963ECSN/R

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
Cirrus Logic Inc.
📦 49-WLCSP
Stereo audio interface and codec · 24 bit · I2C and SPI · 49-ball WLCSP · 3.59 mm x 3.98 mm · Stereo · Surface mount

تواصل لمعرفة السعر

عرض ورقة البيانات ←

WM8962ECSN/R الحدود القصوى والخصائص الكهربائية

Product Type Stereo audio codec
Audio Bit Resolution 24 bit
Channel Configuration Stereo
Control Interface I2C and SPI
Integrated Processing Audio enhancement DSP
Package Type 49-WLCSP
Package Dimensions 3.59 mm x 3.98 mm
Alternative Package Designation PBGA49 / WCSP-49
Package Body Size 3.60 mm x 3.90 mm
Package Height 0.7 mm
Ball Pitch 0.5 mm
Package Construction MO-211C
Technology CMOS
Lead-Free Construction Lead-free
نوع التركيب Surface mount

دليل تكوين أطراف WM8962ECSN/R mo-211c

تكوين الأطراف لـ WM8962ECSN/R (حزمة mo-211c). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة mo-211c لـ WM8962ECSN/R

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ WM8962ECSN/R.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

WM8962ECSN/R مناسب لـ 6 التطبيقs: Portable Media Player, Smart Audio Endpoint, Wireless Headset, Multimedia Tablet, Industrial Audio Control Panel, USB Audio Accessory.

📱

Portable Media Player

The WM8962ECSN/R suits portable media designs that need stereo playback and recording in a small board area. Its 24-bit audio resolution supports higher-fidelity digital-audio paths, while I2C or SPI control allows configuration by the host processor. The 49-WLCSP measures 3.59 mm by 3.98 mm, leaving more board space for storage, display, and battery circuitry. Use a low-noise analog supply, place decoupling close to the device, and validate headphone-output crosstalk and idle-channel noise in the complete enclosure.

🧩

Smart Audio Endpoint

The WM8962ECSN/R can serve as the stereo audio interface in a smart speaker, assistant, or connected home endpoint. The integrated audio-enhancement DSP consolidates supported processing into the codec, while the 24-bit interface preserves high-resolution audio data between the host and converters. I2C is useful for compact control wiring, whereas SPI may suit hosts with different bus-timing requirements. Place microphone or line-input traces away from digital clocking and power paths, and confirm channel routing and processing configuration against the manufacturer register documentation.

🎧

Wireless Headset

The WM8962ECSN/R is appropriate for wireless headset and earbud electronics requiring compact stereo conversion. Its small 49-WLCSP footprint supports dense PCB layouts, while I2C and SPI interfaces give the headset controller flexible options for register access. The 24-bit resolution is useful when the source pipeline preserves high-resolution samples. RF and switching circuitry should remain separated from analog inputs and outputs, with careful return-path design to prevent the headset microphone or playback path from picking up digital and RF energy.

📺

Multimedia Tablet

The WM8962ECSN/R can support stereo playback, recording, or headset-routing functions in multimedia tablets and embedded consumer systems. Its 24-bit stereo conversion and selectable I2C or SPI host interface support flexible processor architectures, while integrated audio-enhancement DSP reduces the need for separate supported processing functions. The 3.59 mm by 3.98 mm package preserves board area in compact products. Designers should evaluate power consumption, analog-output filtering, clock jitter sensitivity, and full-system electromagnetic performance before production release.

🏭

Industrial Audio Control Panel

The WM8962ECSN/R can be used in industrial audio-control equipment that converts stereo line or microphone signals for processing and monitoring. I2C control is suitable for common embedded controllers, and 24-bit resolution provides a detailed digital representation when the selected operating mode supports the required audio bandwidth. The compact WLCSP simplifies board placement, but industrial products require careful grounding, surge and ESD design on external connections, and verified operating-temperature limits. Review all electrical limits and protection requirements in the current manufacturer datasheet.

🖥️

USB Audio Accessory

The WM8962ECSN/R is well suited to USB-connected headphones, conference speakers, and desktop audio accessories that need a dedicated stereo codec. The host interface can use I2C or SPI, allowing the accessory controller to configure conversion, routing, and supported enhancement functions. Its 24-bit stereo path is appropriate for high-resolution playback, although actual supported formats and sampling rates must be confirmed in the device documentation. Keep USB data routing and switching regulators separated from analog outputs to minimize audible noise and channel imbalance.

What is the WM8962ECSN/R?
The WM8962ECSN/R is a Cirrus Logic stereo audio codec with 24-bit resolution, I2C and SPI control interfaces, and integrated audio-enhancement DSP. According to the manufacturer product information, the device combines stereo analog-to-digital and digital-to-analog functions in a 49-WLCSP package measuring 3.59 mm by 3.98 mm. It is intended for compact audio systems requiring digital-audio conversion, host control, and integrated signal processing.
What package does WM8962ECSN/R use?
The WM8962ECSN/R uses a 49-WLCSP package measuring 3.59 mm by 3.98 mm. Manufacturer-listing data also identifies the package as PBGA49 or WCSP-49, with an approximate body size of 3.60 mm by 3.90 mm, 0.50 mm pitch, and 0.70 mm height. Use the manufacturer's land pattern and pin-description table when creating the PCB footprint and assigning tracks.
Where can I download the WM8962ECSN/R datasheet PDF?
The WM8962ECSN/R datasheet PDF is available from the manufacturer-linked document at https://www.lcsc.com/datasheet/C323848.pdf. The Cirrus Logic datasheet should be used for the authoritative pin list, electrical limits, register map, application circuit, recommended decoupling, and PCB layout guidance. The searchable part page is also available through the Cirrus Logic technical literature system.
Where can I find the WM8962ECSN/R pinout?
The WM8962ECSN/R pinout should be taken from the pin-description table in the Cirrus Logic WM8962 datasheet because this 49-WLCSP is too small for reliable inference from a generic package drawing. Confirm the exposed-ball or terminal assignments, analog supplies, digital supplies, grounds, clocks, data interfaces, and reset functions against the exact ordering code before PCB release.
Which interfaces does the WM8962ECSN/R support?
The WM8962ECSN/R supports I2C and SPI host-control interfaces and uses a 24-bit stereo audio format. According to the Cirrus Logic product listing, the part is a stereo codec with audio-enhancement DSP. The choice between I2C and SPI should be based on host-controller support, board-routing constraints, and the operating sequence defined in the manufacturer datasheet.
Is the WM8962ECSN/R suitable for compact audio products?
The WM8962ECSN/R is suitable for compact audio products because it combines 24-bit stereo conversion, two digital control options, and audio-enhancement DSP in a 49-WLCSP measuring 3.59 mm by 3.98 mm. Its small footprint supports portable media, headset, smart-audio, and multimedia designs. Board-area savings must be balanced against careful analog layout, decoupling, clocking, and thermal validation.
What is the difference between WM8962ECSN/R and WM8962BECSN/R?
The WM8962BECSN/R is identified as a pin-to-pin-compatible WM8962-family variant with enhanced power-management features, while retaining the same 24-bit stereo codec and 49-WLCSP format. The published cross-reference does not quantify the power-management improvement, so verify the enable, power-state, and current-consumption differences in each manufacturer datasheet before approving it as a replacement.
Can WM8960ECSN/R replace WM8962ECSN/R?
The WM8960ECSN/R is a same-package stereo-codec alternative, but it supports a maximum sampling rate of 48 kHz while the WM8962 family supports 96 kHz operation. Although both use the 49-WLCSP format and retain a 24-bit stereo interface, the 48 kHz versus 96 kHz limitation makes the WM8960 unsuitable as a drop-in choice for designs requiring 96 kHz audio.
When should I choose WM8962ECSN/R instead of WM8962BECSN/R?
Choose the WM8962ECSN/R when the reference design and firmware are qualified for its control, power-management, and audio-processing behavior. Choose the WM8962BECSN/R only after confirming that its enhanced power-management functions do not change register compatibility, startup behavior, or application configuration. Both retain a 24-bit stereo interface in the same package, so final selection depends on verified functional requirements.
When should I choose WM8963ECSN/R over WM8962ECSN/R?
Choose WM8963ECSN/R when a newer same-brand codec has been validated for the required channel count, sampling rates, processing functions, interface timing, and pin mapping. The WM8963ECSN/R is closely related by family and package naming, but that relationship alone does not guarantee identical software support or register behavior. Prototype and compare both devices before changing a production design.
What can replace the WM8962ECSN/R?
The WM8962BECSN/R is the closest documented pin-to-pin alternative because it retains the 24-bit stereo codec in the same package and adds enhanced power-management features. The WM8960ECSN/R is another same-package option, but its 48 kHz maximum sampling rate rules it out for 96 kHz designs. Treat either substitution as conditional on a full pin, register, timing, and electrical review.
Is there a cross-brand drop-in replacement for WM8962ECSN/R?
No verified cross-brand drop-in replacement for the WM8962ECSN/R is established by the available component cross-reference information. A same-package audio codec is not automatically drop-in compatible because analog pin assignments, clock requirements, register maps, filtering, mixer behavior, and power sequencing can differ. Use the Request a Quote form on this page for sourcing assistance with the original manufacturer part.
Where can I buy WM8962ECSN/R and what is its price?
The WM8962ECSN/R can be sourced by submitting the exact MPN through the Request a Quote form on this page. The visible pricing interface provides current commercial terms without embedding figures that may change with quantity, currency, or inventory status. Include the required reel quantity, target date, and any date-code or traceability requirements with the request.
What is the lead time and stock status for WM8962ECSN/R?
Current stock and lead time for WM8962ECSN/R should be confirmed through the Request a Quote form on this page. One distributor search result explicitly describes the part as in stock, but that observation is time-sensitive and does not establish a guaranteed allocation for a production order. Provide your scheduled assembly date and forecast quantity for a current commitment.
What are the key specifications engineers should know about WM8962ECSN/R?
The key WM8962ECSN/R specifications are 24-bit stereo audio resolution, I2C and SPI host interfaces, integrated audio-enhancement DSP, and a compact 49-WLCSP package measuring 3.59 mm by 3.98 mm. According to the Cirrus Logic part information, the package is approximately 0.50 mm pitch and 0.70 mm high. Electrical limits and timing must be checked in the manufacturer datasheet.

بيانات مرجعية هندسية لـ WM8962ECSN/R — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the WM8962ECSN/R for a compact stereo audio design requiring 24-bit conversion, 96 kHz-class operation, integrated audio-enhancement processing, and either I2C or SPI host control. Select the WM8962BECSN/R when its enhanced power-management behavior has been validated and could improve the target power architecture; confirm register and startup compatibility before substitution. The WM8960ECSN/R is appropriate only when 48 kHz maximum sampling is acceptable because its sampling-rate ceiling is 50% lower. Evaluate the WM8963ECSN/R when its newer audio features provide a measured design advantage, but verify channel support, processing, clocking, and register changes. No verified cross-brand drop-in alternative is established, so changing manufacturers requires a new footprint, schematic, firmware, and signal-integrity review rather than a simple PCB replacement.

المقارنة مع البدائل

المعامل هذا المنتج WM8962BECSN/R WM8960ECSN/R WM8963ECSN/R
Package 49-WLCSP, 3.59 mm x 3.98 mm 49-WLCSP, same package 49-WLCSP, same package 49-WLCSP, same package
Brand Cirrus Logic Cirrus Logic Cirrus Logic Cirrus Logic

أبرز الفروقات

  • Supports 96 kHz operation in the target codec family (مقابلWM8960ECSN/R)
  • Pin-to-pin variant with enhanced power-management features (مقابلWM8962BECSN/R)
  • Compact 49-WLCSP implementation with dual control-interface options (مقابلWM8963ECSN/R)

ملاحظات التصميم

Create the PCB footprint from the exact WM8962ECSN/R land pattern rather than a generic 49-ball WLCSP drawing. Confirm whether the exposed thermal or ground connection is part of the recommended pattern, preserve the manufacturer's pad and solder-mask dimensions, and place all input, output, reference, and decoupling capacitors as close as practical to their assigned pins.

Separate analog and digital return currents where the ground reference permits it, and route microphone or line inputs away from clock, SPI, I2C, and switching-regulator nodes. Keep the WLCSP ground connection compact and continuous. Validate the final layout for idle-channel hiss, channel imbalance, crosstalk, and susceptibility to nearby digital switching energy.

Use a low-jitter clock source because conversion performance depends on a stable codec reference. Match clock and digital-interface routing to the voltage and timing requirements in the manufacturer datasheet, provide series damping where edge rates require it, and test startup, format changes, mute transitions, and full-scale signals for glitches or synchronization errors.

Do not treat the physically similar WM8960ECSN/R as an unconditional substitute: its documented maximum sampling rate is 48 kHz, making it unsuitable for a 96 kHz design. Likewise, confirm register compatibility, analog routing, power sequencing, and package pin assignments for WM8962BECSN/R and WM8963ECSN/R before reusing an existing PCB.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

Manufacturer-listing information identifies the WM8962ECSN/R package as lead-free and constructed to MO-211C. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the available component information.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

WM8962ECSN/R datasheet WM8962ECSN/R pinout WM8962ECSN/R datasheet pdf Cirrus Logic WM8962ECSN/R WM8962ECSN/R equivalent WM8962ECSN/R replacement WM8962ECSN/R cross reference WM8962ECSN/R vs WM8960ECSN/R WM8962ECSN/R footprint WM8962ECSN/R price WM8962ECSN/R stock WM8962ECSN/R application circuit

المكونات والمصطلحات ذات الصلة

Cirrus Logic WM8962ECSN/R WM8962BECSN/R WM8960ECSN/R WM8963ECSN/R stereo audio codec audio codec audio interface IC interface integrated circuit 24-bit audio I2C SPI audio enhancement DSP digital-to-analog converter analog-to-digital converter 49-WLCSP WCSP-49 PBGA49 QFN family surface-mount technology SMD MO-211C lead-free portable media player smart audio endpoint wireless headset
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر