WM8962ECSN/R - 24-Bit Stereo Audio Codec | Cirrus Logic
MPN: WM8962ECSN/R ✓ ActiveWM8962ECSN/R Overview
An audio codec is an interface IC that converts digital audio data into analog signals and analog sound signals into digital data. As a stereo codec, the WM8962ECSN/R handles two audio channels. Its 24-bit data resolution supports high-resolution audio architectures, while the integrated audio-enhancement DSP provides processing functions within the same device rather than requiring a separate external processor for supported use cases.
The WM8962ECSN/R supports both I2C and SPI control buses, giving the host processor a choice of communication methods. I2C is useful in compact systems where pin count and wiring simplicity are priorities, while SPI can provide a different host-interface tradeoff when clocking and data-transfer characteristics suit the application. The exact register implementation, supported audio formats, and control sequence should be confirmed in the manufacturer datasheet.
The physical package is a 49-WLCSP with a stated body size of 3.59 mm by 3.98 mm. Other manufacturer-listing data describes the package as PBGA49 or WCSP-49, approximately 3.60 mm by 3.90 mm, with 0.50 mm pitch, 0.70 mm height, MO-211C construction, and lead-free construction. These dimensions make the device suitable for compact portable and embedded audio products where board area is tightly constrained.
Typical design environments include portable media devices, smart audio endpoints, headset and microphone signal chains, multimedia appliances, and embedded systems requiring stereo conversion. System-level success depends on correct analog input and output routing, suitable decoupling, clean power rails, an appropriately designed clock source, and layout that separates sensitive audio signals from digital switching activity.
PCB implementation should follow the manufacturer land pattern and pin-assignment table exactly. Place input and output capacitors adjacent to their relevant device pins, provide a continuous ground reference, and keep high-speed digital clock and control routing away from microphone or line-level analog inputs. Validate the assembled design for channel crosstalk, idle-channel noise, clock jitter sensitivity, and start-up behavior.
This product page consolidates the confirmed package, interface, resolution, and sourcing information while distinguishing documented facts from details that must be checked against the current manufacturer datasheet. It also identifies same-brand stereo-codec alternatives that require explicit pin, feature, and sample-rate validation before being treated as drop-in replacements.
Drop-in alternatives for WM8962ECSN/R — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with WM8962ECSN/R (same form factor and footprint) — differing in Package Type, Package Dimensions, Product Type.
WM8962BECSN/R
✅ Drop-InContact for price
View Datasheet →WM8960ECSN/R
✅ Drop-In📋 Reference alternative (not in catalog)
WM8963ECSN/R
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →WM8962ECSN/R Maximum Ratings & Electrical Characteristics
| Product Type | Stereo audio codec |
| Audio Bit Resolution | 24 bit |
| Channel Configuration | Stereo |
| Control Interface | I2C and SPI |
| Integrated Processing | Audio enhancement DSP |
| Package Type | 49-WLCSP |
| Package Dimensions | 3.59 mm x 3.98 mm |
| Alternative Package Designation | PBGA49 / WCSP-49 |
| Package Body Size | 3.60 mm x 3.90 mm |
| Package Height | 0.7 mm |
| Ball Pitch | 0.5 mm |
| Package Construction | MO-211C |
| Technology | CMOS |
| Lead-Free Construction | Lead-free |
| Mounting Type | Surface mount |
WM8962ECSN/R mo-211c Pin Configuration Guide
Pin configuration for WM8962ECSN/R (mo-211c package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for WM8962ECSN/R.
Refer to the datasheet for full pin configuration.
Typical Applications
WM8962ECSN/R is suitable for 6 applications: Portable Media Player, Smart Audio Endpoint, Wireless Headset, Multimedia Tablet, Industrial Audio Control Panel, USB Audio Accessory.
Portable Media Player
The WM8962ECSN/R suits portable media designs that need stereo playback and recording in a small board area. Its 24-bit audio resolution supports higher-fidelity digital-audio paths, while I2C or SPI control allows configuration by the host processor. The 49-WLCSP measures 3.59 mm by 3.98 mm, leaving more board space for storage, display, and battery circuitry. Use a low-noise analog supply, place decoupling close to the device, and validate headphone-output crosstalk and idle-channel noise in the complete enclosure.
Recommended
Smart Audio Endpoint
The WM8962ECSN/R can serve as the stereo audio interface in a smart speaker, assistant, or connected home endpoint. The integrated audio-enhancement DSP consolidates supported processing into the codec, while the 24-bit interface preserves high-resolution audio data between the host and converters. I2C is useful for compact control wiring, whereas SPI may suit hosts with different bus-timing requirements. Place microphone or line-input traces away from digital clocking and power paths, and confirm channel routing and processing configuration against the manufacturer register documentation.
Recommended
Wireless Headset
The WM8962ECSN/R is appropriate for wireless headset and earbud electronics requiring compact stereo conversion. Its small 49-WLCSP footprint supports dense PCB layouts, while I2C and SPI interfaces give the headset controller flexible options for register access. The 24-bit resolution is useful when the source pipeline preserves high-resolution samples. RF and switching circuitry should remain separated from analog inputs and outputs, with careful return-path design to prevent the headset microphone or playback path from picking up digital and RF energy.
Recommended
Multimedia Tablet
The WM8962ECSN/R can support stereo playback, recording, or headset-routing functions in multimedia tablets and embedded consumer systems. Its 24-bit stereo conversion and selectable I2C or SPI host interface support flexible processor architectures, while integrated audio-enhancement DSP reduces the need for separate supported processing functions. The 3.59 mm by 3.98 mm package preserves board area in compact products. Designers should evaluate power consumption, analog-output filtering, clock jitter sensitivity, and full-system electromagnetic performance before production release.
Recommended
Industrial Audio Control Panel
The WM8962ECSN/R can be used in industrial audio-control equipment that converts stereo line or microphone signals for processing and monitoring. I2C control is suitable for common embedded controllers, and 24-bit resolution provides a detailed digital representation when the selected operating mode supports the required audio bandwidth. The compact WLCSP simplifies board placement, but industrial products require careful grounding, surge and ESD design on external connections, and verified operating-temperature limits. Review all electrical limits and protection requirements in the current manufacturer datasheet.
Recommended
USB Audio Accessory
The WM8962ECSN/R is well suited to USB-connected headphones, conference speakers, and desktop audio accessories that need a dedicated stereo codec. The host interface can use I2C or SPI, allowing the accessory controller to configure conversion, routing, and supported enhancement functions. Its 24-bit stereo path is appropriate for high-resolution playback, although actual supported formats and sampling rates must be confirmed in the device documentation. Keep USB data routing and switching regulators separated from analog outputs to minimize audible noise and channel imbalance.
Recommended
Recommended Products Summary
Engineering reference data for WM8962ECSN/R — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | WM8962BECSN/R | WM8960ECSN/R | WM8963ECSN/R |
|---|---|---|---|---|
| Package | 49-WLCSP, 3.59 mm x 3.98 mm | 49-WLCSP, same package | 49-WLCSP, same package | 49-WLCSP, same package |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
Key Differentiators
- Supports 96 kHz operation in the target codec family (vs WM8960ECSN/R)
- Pin-to-pin variant with enhanced power-management features (vs WM8962BECSN/R)
- Compact 49-WLCSP implementation with dual control-interface options (vs WM8963ECSN/R)
Design Notes
Create the PCB footprint from the exact WM8962ECSN/R land pattern rather than a generic 49-ball WLCSP drawing. Confirm whether the exposed thermal or ground connection is part of the recommended pattern, preserve the manufacturer's pad and solder-mask dimensions, and place all input, output, reference, and decoupling capacitors as close as practical to their assigned pins.
Separate analog and digital return currents where the ground reference permits it, and route microphone or line inputs away from clock, SPI, I2C, and switching-regulator nodes. Keep the WLCSP ground connection compact and continuous. Validate the final layout for idle-channel hiss, channel imbalance, crosstalk, and susceptibility to nearby digital switching energy.
Use a low-jitter clock source because conversion performance depends on a stable codec reference. Match clock and digital-interface routing to the voltage and timing requirements in the manufacturer datasheet, provide series damping where edge rates require it, and test startup, format changes, mute transitions, and full-scale signals for glitches or synchronization errors.
Do not treat the physically similar WM8960ECSN/R as an unconditional substitute: its documented maximum sampling rate is 48 kHz, making it unsuitable for a 96 kHz design. Likewise, confirm register compatibility, analog routing, power sequencing, and package pin assignments for WM8962BECSN/R and WM8963ECSN/R before reusing an existing PCB.
Compliance Information
Manufacturer-listing information identifies the WM8962ECSN/R package as lead-free and constructed to MO-211C. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the available component information.