XC2C32A-6VQG44I - 32-Macrocell 5.5ns CPLD | AMD/Xilinx
MPN: XC2C32A-6VQG44I ✗ انتهى عمره الإنتاجيXC2C32A-6VQG44I نظرة عامة
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic fabric with non-volatile configuration storage. Its hierarchy is CPLD → programmable logic device → programmable logic IC → semiconductor. Compared with a small FPGA, a 32-macrocell CPLD is intended for compact glue logic, control logic, interface adaptation, and deterministic signal-processing functions rather than large system-level workloads.
The XC2C32A provides 750 logic gates, 32 macrocells, and 33 I/O pins in a 10 x 10 mm VQFP package. It uses 0.18 μm CMOS technology, supports in-system programming through JTAG, and offers hot-pluggable PLA architecture. The manufacturer datasheet identifies the family as compatible with SSTL2_1 and SSTL3_1 product specifications and highlights 100% product-term routability across function blocks.
CoolRunner-II architecture combines an interconnected programmable logic array with fast interconnect, allowing relatively compact designs to implement combinational equations, state machines, counters, address decoding, and control functions. In-system programmability permits configuration or reconfiguration without removing the device, supporting production programming, field updates, and board-level initialization workflows when the surrounding circuit and programming system are designed accordingly.
Typical uses include industrial I/O expansion, legacy interface emulation, control-panel logic, peripheral interfacing, signal conditioning, and compact glue logic around microcontrollers or processors. The 33 available I/O pins provide enough interface density for bus steering, level conversion, status aggregation, and programmable control signals, while JTAG programming supports manufacturing test and engineering development.
PCB implementation should preserve the manufacturer's recommended VQFP-44 footprint, power and ground distribution, decoupling arrangement, and JTAG interface. Because the CPLD is non-volatile, configuration is retained, but designers should still include suitable startup behavior and programming access for field updates. The -6 speed designation distinguishes timing grade rather than functional capacity.
This page combines manufacturer specifications, package and programming details, verified drop-in alternatives, comparison parameters, and practical design guidance. It also distinguishes documented replacements from options that require different packages, speed grades, or device architectures, helping engineers evaluate PCB reuse without overlooking qualification and timing constraints.
بدائل مباشرة لـ XC2C32A-6VQG44I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC2C32A-6VQG44I (نفس عامل الشكل والبصمة) — يختلف في Process Technology, Architecture, Package, Quiescent Current.
XC2C32A-6VQ44I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XA2C32A-6VQG44I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC2C32A-4VQG44I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC2C32A-5VQG44I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC2C32A-7VQG44I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC2C32A-8VQG44I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC2C32A-6VQG44I الحدود القصوى والخصائص الكهربائية
| Device Type | CoolRunner-II complex programmable logic device |
| Programmable Type | In-system programmable |
| Number of Macrocells | 32 macrocells |
| Number of Logic Gates | 750 gates |
| Number of I/O Pins | 33 I/O pins |
| Maximum Propagation Delay | 5.5 ns |
| Speed Grade | -6 |
| Maximum Performance | 200 MHz |
| Process Technology | 0.18 μm CMOS |
| Internal Supply Voltage | 1.7 V to 1.9 V |
| Programming Interface | JTAG |
| Architecture | Hot-pluggable PLA architecture |
| العلبة | 44-lead VQFP, 10 x 10 mm |
| نوع التركيب | Surface mount |
| حالة RoHS | RoHS compliant |
| Lead-Free Status | Lead free |
| Product-Term Routability | 100% across function blocks |
| Supported I/O Specifications | SSTL2_1 and SSTL3_1 |
| Operating Temperature Grade | Industrial grade |
| Input Overvoltage Tolerance | Up to 3.9 V without physical damage |
| Input Hysteresis | Used on 1.5 V inputs |
| Configuration Memory | Non-volatile, retained configuration |
دليل تكوين أطراف XC2C32A-6VQG44I 44-lead vqfp, 10 x 10 mm
تكوين الأطراف لـ XC2C32A-6VQG44I (حزمة 44-lead vqfp, 10 x 10 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC2C32A-6VQG44I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC2C32A-6VQG44I مناسب لـ 6 التطبيقs: Industrial I/O Expansion, JTAG-Programmable Control Logic, Legacy Peripheral Interface Adaptation, Embedded System Glue Logic, Status and Alarm Panel Logic, Data Acquisition Control.
Industrial I/O Expansion
The XC2C32A-6VQG44I fits industrial I/O expansion modules because its 33 programmable I/O pins can consolidate multiple discrete logic functions around a controller. The 32 macrocells can implement address decoding, status aggregation, interlock logic, and discrete control functions, while the 5.5 ns maximum propagation delay supports deterministic short combinational paths. JTAG programming allows production and field configuration without adding a separate external programmable device. Using the industrial-grade ordering option can simplify procurement for equipment specified for industrial environmental requirements.
موصى به
JTAG-Programmable Control Logic
The XC2C32A-6VQG44I is appropriate for dedicated control logic that must be programmed through JTAG during manufacturing or maintenance. Its in-system-programmable, non-volatile architecture permits a compact implementation of sequencers, state machines, interlocks, and configuration checks. The -6 grade provides a 5.5 ns maximum propagation delay, which is useful for short control paths, while 32 macrocells allow several related functions to share one device. The same 44-lead VQFP footprint simplifies comparisons with other XC2C32A speed and qualification options.
موصى به
Legacy Peripheral Interface Adaptation
The XC2C32A-6VQG44I can bridge older peripheral interfaces to modern control electronics by implementing protocol timing, bus steering, and signal conditioning in programmable logic. Thirty-three I/O pins provide a practical interface budget, while the 32-macrocell array is suitable for compact state machines and address-decoding functions. The 5.5 ns maximum propagation delay supports short timing paths, but the designer must still calculate setup, hold, and clock-domain requirements against the external device specifications.
موصى به
Embedded System Glue Logic
The XC2C32A-6VQG44I is well suited to glue logic that connects a microcontroller, memory, and discrete peripherals without consuming valuable processor pins. Typical functions include chip-select generation, interrupt arbitration, latch control, and peripheral bus decoding. With 32 macrocells and 33 I/O pins, the device can consolidate several small logic functions into one package. Its 0.18 μm CMOS implementation and 200 MHz maximum-performance figure provide useful context when selecting clock rates and timing margins.
موصى به
Status and Alarm Panel Logic
A monitoring panel can use the XC2C32A-6VQG44I to consolidate indicator states, alarm prioritization, debounce logic, and output interlocks. The 33 I/O pins allow a substantial number of discrete inputs and outputs to be handled in one programmable device, reducing the number of separate logic components. The 5.5 ns maximum propagation delay is useful for short combinational alarm paths, while non-volatile configuration ensures the operating logic remains available after power is restored.
موصى به
Data Acquisition Control
The XC2C32A-6VQG44I can coordinate data-acquisition front ends by generating control strobes, multiplexing discrete signals, and handling compact sequencing functions. Thirty-three I/O pins suit systems that combine analog front ends, status inputs, and actuator outputs, while the 32 macrocells are sufficient for non-intensive control and decoding logic. The CPLD's deterministic timing and JTAG programming make it useful for repeatable laboratory or industrial acquisition systems where predictable behavior and serviceable configuration are important.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC2C32A-6VQG44I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC2C32A-6VQ44I | XA2C32A-6VQG44I | XC2C32A-4VQG44I | XC2C32A-5VQG44I | XC2C32A-7VQG44I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm |
| Number of Macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells |
| Number of I/O Pins | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins |
| Speed Grade | -6 | -6 | -6 | -4 | -5 | -7 |
| Programming Interface | JTAG | JTAG | JTAG | JTAG | JTAG | JTAG |
| Architecture | CoolRunner-II | CoolRunner-II | CoolRunner-II automotive | CoolRunner-II | CoolRunner-II | CoolRunner-II |
| Internal Supply Voltage | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V |
أبرز الفروقات
- Direct same-speed drop-in option (مقابلXC2C32A-6VQ44I)
- Automotive-qualified family option (مقابلXA2C32A-6VQG44I)
- Higher-speed timing margin available (مقابلXC2C32A-5VQG44I)
- Lower-speed option for relaxed timing budgets (مقابلXC2C32A-7VQG44I)
ملاحظات التصميم
Use the 44-lead VQFP land pattern and pin numbering defined by the AMD DS310 manufacturer datasheet. Keep power and ground connections on the recommended nets, place decoupling capacitors close to their associated pins, and route JTAG signals to an accessible header or production fixture. Because this is a fine-pitch legacy package, inspect solder paste volume, stencil apertures, and reflow profile before qualifying the assembly process.
Do not infer the complete I/O voltage range from the 3.9 V input tolerance stated in DS310. Select the electrical mode for each bank according to the datasheet and the external device, then verify signal levels, slew behavior, and setup/hold timing at the actual board trace length. The -6 grade's 5.5 ns maximum propagation delay is a device timing value and should not be substituted for a complete system timing budget.
Avoid replacing XC2C32A-6VQG44I solely by macrocell count or package dimensions. Confirm that the proposed part has the same 44-pin assignment, JTAG interface, supported voltage standards, and adequate -6 timing grade. Speed-grade substitutions may preserve electrical function but can change procurement status, timing margin, qualification, and marking, so each change should be reviewed against the production specification.
Keep sensitive or externally exposed programmable-logic traces away from noisy power-conversion stages where practical, provide a continuous return path, and isolate any external programming connector with appropriate signal-integrity practices. The CPLD can retain its configuration after power cycling, but a controlled startup sequence is still valuable for resetting attached peripherals and preventing undefined system states during initialization.
معلومات الامتثال
RoHS-compliant and lead-free status are explicitly identified for XC2C32A-6VQG44I. The industrial ordering option is not identified as an AEC-Q100-qualified automotive device; XA2C32A-6VQG44I is the automotive-oriented family option. REACH, halogen-free, and conflict-minerals status are unknown.