XC2C32A-6VQG44I - 32-Macrocell 5.5ns CPLD | AMD/Xilinx
MPN: XC2C32A-6VQG44I ✗ End of LifeXC2C32A-6VQG44I Overview
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic fabric with non-volatile configuration storage. Its hierarchy is CPLD → programmable logic device → programmable logic IC → semiconductor. Compared with a small FPGA, a 32-macrocell CPLD is intended for compact glue logic, control logic, interface adaptation, and deterministic signal-processing functions rather than large system-level workloads.
The XC2C32A provides 750 logic gates, 32 macrocells, and 33 I/O pins in a 10 x 10 mm VQFP package. It uses 0.18 μm CMOS technology, supports in-system programming through JTAG, and offers hot-pluggable PLA architecture. The manufacturer datasheet identifies the family as compatible with SSTL2_1 and SSTL3_1 product specifications and highlights 100% product-term routability across function blocks.
CoolRunner-II architecture combines an interconnected programmable logic array with fast interconnect, allowing relatively compact designs to implement combinational equations, state machines, counters, address decoding, and control functions. In-system programmability permits configuration or reconfiguration without removing the device, supporting production programming, field updates, and board-level initialization workflows when the surrounding circuit and programming system are designed accordingly.
Typical uses include industrial I/O expansion, legacy interface emulation, control-panel logic, peripheral interfacing, signal conditioning, and compact glue logic around microcontrollers or processors. The 33 available I/O pins provide enough interface density for bus steering, level conversion, status aggregation, and programmable control signals, while JTAG programming supports manufacturing test and engineering development.
PCB implementation should preserve the manufacturer's recommended VQFP-44 footprint, power and ground distribution, decoupling arrangement, and JTAG interface. Because the CPLD is non-volatile, configuration is retained, but designers should still include suitable startup behavior and programming access for field updates. The -6 speed designation distinguishes timing grade rather than functional capacity.
This page combines manufacturer specifications, package and programming details, verified drop-in alternatives, comparison parameters, and practical design guidance. It also distinguishes documented replacements from options that require different packages, speed grades, or device architectures, helping engineers evaluate PCB reuse without overlooking qualification and timing constraints.
Drop-in alternatives for XC2C32A-6VQG44I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC2C32A-6VQG44I (same form factor and footprint) — differing in Process Technology, Architecture, Package, Quiescent Current.
XC2C32A-6VQ44I
✅ Drop-InContact for price
View Datasheet →XA2C32A-6VQG44I
✅ Drop-In📋 Reference alternative (not in catalog)
XC2C32A-4VQG44I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC2C32A-5VQG44I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC2C32A-7VQG44I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC2C32A-8VQG44I
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC2C32A-6VQG44I Maximum Ratings & Electrical Characteristics
| Device Type | CoolRunner-II complex programmable logic device |
| Programmable Type | In-system programmable |
| Number of Macrocells | 32 macrocells |
| Number of Logic Gates | 750 gates |
| Number of I/O Pins | 33 I/O pins |
| Maximum Propagation Delay | 5.5 ns |
| Speed Grade | -6 |
| Maximum Performance | 200 MHz |
| Process Technology | 0.18 μm CMOS |
| Internal Supply Voltage | 1.7 V to 1.9 V |
| Programming Interface | JTAG |
| Architecture | Hot-pluggable PLA architecture |
| Package | 44-lead VQFP, 10 x 10 mm |
| Mounting Type | Surface mount |
| RoHS Status | RoHS compliant |
| Lead-Free Status | Lead free |
| Product-Term Routability | 100% across function blocks |
| Supported I/O Specifications | SSTL2_1 and SSTL3_1 |
| Operating Temperature Grade | Industrial grade |
| Input Overvoltage Tolerance | Up to 3.9 V without physical damage |
| Input Hysteresis | Used on 1.5 V inputs |
| Configuration Memory | Non-volatile, retained configuration |
XC2C32A-6VQG44I 44-lead vqfp, 10 x 10 mm Pin Configuration Guide
Pin configuration for XC2C32A-6VQG44I (44-lead vqfp, 10 x 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC2C32A-6VQG44I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC2C32A-6VQG44I is suitable for 6 applications: Industrial I/O Expansion, JTAG-Programmable Control Logic, Legacy Peripheral Interface Adaptation, Embedded System Glue Logic, Status and Alarm Panel Logic, Data Acquisition Control.
Industrial I/O Expansion
The XC2C32A-6VQG44I fits industrial I/O expansion modules because its 33 programmable I/O pins can consolidate multiple discrete logic functions around a controller. The 32 macrocells can implement address decoding, status aggregation, interlock logic, and discrete control functions, while the 5.5 ns maximum propagation delay supports deterministic short combinational paths. JTAG programming allows production and field configuration without adding a separate external programmable device. Using the industrial-grade ordering option can simplify procurement for equipment specified for industrial environmental requirements.
Recommended
JTAG-Programmable Control Logic
The XC2C32A-6VQG44I is appropriate for dedicated control logic that must be programmed through JTAG during manufacturing or maintenance. Its in-system-programmable, non-volatile architecture permits a compact implementation of sequencers, state machines, interlocks, and configuration checks. The -6 grade provides a 5.5 ns maximum propagation delay, which is useful for short control paths, while 32 macrocells allow several related functions to share one device. The same 44-lead VQFP footprint simplifies comparisons with other XC2C32A speed and qualification options.
Recommended
Legacy Peripheral Interface Adaptation
The XC2C32A-6VQG44I can bridge older peripheral interfaces to modern control electronics by implementing protocol timing, bus steering, and signal conditioning in programmable logic. Thirty-three I/O pins provide a practical interface budget, while the 32-macrocell array is suitable for compact state machines and address-decoding functions. The 5.5 ns maximum propagation delay supports short timing paths, but the designer must still calculate setup, hold, and clock-domain requirements against the external device specifications.
Recommended
Embedded System Glue Logic
The XC2C32A-6VQG44I is well suited to glue logic that connects a microcontroller, memory, and discrete peripherals without consuming valuable processor pins. Typical functions include chip-select generation, interrupt arbitration, latch control, and peripheral bus decoding. With 32 macrocells and 33 I/O pins, the device can consolidate several small logic functions into one package. Its 0.18 μm CMOS implementation and 200 MHz maximum-performance figure provide useful context when selecting clock rates and timing margins.
Recommended
Status and Alarm Panel Logic
A monitoring panel can use the XC2C32A-6VQG44I to consolidate indicator states, alarm prioritization, debounce logic, and output interlocks. The 33 I/O pins allow a substantial number of discrete inputs and outputs to be handled in one programmable device, reducing the number of separate logic components. The 5.5 ns maximum propagation delay is useful for short combinational alarm paths, while non-volatile configuration ensures the operating logic remains available after power is restored.
Recommended
Data Acquisition Control
The XC2C32A-6VQG44I can coordinate data-acquisition front ends by generating control strobes, multiplexing discrete signals, and handling compact sequencing functions. Thirty-three I/O pins suit systems that combine analog front ends, status inputs, and actuator outputs, while the 32 macrocells are sufficient for non-intensive control and decoding logic. The CPLD's deterministic timing and JTAG programming make it useful for repeatable laboratory or industrial acquisition systems where predictable behavior and serviceable configuration are important.
Recommended
Recommended Products Summary
Engineering reference data for XC2C32A-6VQG44I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC2C32A-6VQ44I | XA2C32A-6VQG44I | XC2C32A-4VQG44I | XC2C32A-5VQG44I | XC2C32A-7VQG44I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm | 44-lead VQFP, 10 x 10 mm |
| Number of Macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells | 32 macrocells |
| Number of I/O Pins | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins |
| Speed Grade | -6 | -6 | -6 | -4 | -5 | -7 |
| Programming Interface | JTAG | JTAG | JTAG | JTAG | JTAG | JTAG |
| Architecture | CoolRunner-II | CoolRunner-II | CoolRunner-II automotive | CoolRunner-II | CoolRunner-II | CoolRunner-II |
| Internal Supply Voltage | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V | 1.7 V to 1.9 V |
Key Differentiators
- Direct same-speed drop-in option (vs XC2C32A-6VQ44I)
- Automotive-qualified family option (vs XA2C32A-6VQG44I)
- Higher-speed timing margin available (vs XC2C32A-5VQG44I)
- Lower-speed option for relaxed timing budgets (vs XC2C32A-7VQG44I)
Design Notes
Use the 44-lead VQFP land pattern and pin numbering defined by the AMD DS310 manufacturer datasheet. Keep power and ground connections on the recommended nets, place decoupling capacitors close to their associated pins, and route JTAG signals to an accessible header or production fixture. Because this is a fine-pitch legacy package, inspect solder paste volume, stencil apertures, and reflow profile before qualifying the assembly process.
Do not infer the complete I/O voltage range from the 3.9 V input tolerance stated in DS310. Select the electrical mode for each bank according to the datasheet and the external device, then verify signal levels, slew behavior, and setup/hold timing at the actual board trace length. The -6 grade's 5.5 ns maximum propagation delay is a device timing value and should not be substituted for a complete system timing budget.
Avoid replacing XC2C32A-6VQG44I solely by macrocell count or package dimensions. Confirm that the proposed part has the same 44-pin assignment, JTAG interface, supported voltage standards, and adequate -6 timing grade. Speed-grade substitutions may preserve electrical function but can change procurement status, timing margin, qualification, and marking, so each change should be reviewed against the production specification.
Keep sensitive or externally exposed programmable-logic traces away from noisy power-conversion stages where practical, provide a continuous return path, and isolate any external programming connector with appropriate signal-integrity practices. The CPLD can retain its configuration after power cycling, but a controlled startup sequence is still valuable for resetting attached peripherals and preventing undefined system states during initialization.
Compliance Information
RoHS-compliant and lead-free status are explicitly identified for XC2C32A-6VQG44I. The industrial ordering option is not identified as an AEC-Q100-qualified automotive device; XA2C32A-6VQG44I is the automotive-oriented family option. REACH, halogen-free, and conflict-minerals status are unknown.