XC3S1500-5FG456C - 1.5M Gate Spartan-3 FPGA | AMD
MPN: XC3S1500-5FG456C ✗ انتهى عمره الإنتاجيXC3S1500-5FG456C نظرة عامة
A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, programmable interconnect, block RAM, and dedicated I/O resources are configured after manufacture. Within the product hierarchy, an FPGA sits above simple programmable logic devices and provides parallel hardware implementation for digital control, signal processing, communications, and interface functions without relying on a general-purpose processor for time-critical operations.
The XC3S1500 combines 29,952 configurable logic cells with 3,328 configurable logic blocks and approximately 1.5 million system gates. Its 333 I/O sites support board-level connections, while 432 Kbits of block RAM provide dedicated on-chip storage. The listed 725 MHz figure represents the maximum device operating speed used for timing-oriented designs; actual interface performance depends on the selected clock, I/O standard, routing, logic depth, and timing constraints.
The device uses 90 nm CMOS fabrication and a 1.2 V core architecture. Multiple dedicated I/O banks allow separate voltage domains and selectable I/O standards, making careful bank planning important in mixed-speed designs. Because the FPGA is assembled in a fine-pitch 456-ball BGA, its power delivery, decoupling, via arrangement, and thermal performance depend heavily on multilayer PCB layout and assembly quality.
Typical uses include industrial control, data acquisition, communications gateways, embedded video processing, instrumentation, and legacy interface consolidation. The 333 I/O sites are particularly useful for parallel buses, digital converters, memory interfaces, and multiple low-speed peripherals, while embedded block RAM supports packet buffering, FIFO structures, and local data storage.
For new designs, verify that the Spartan-3 device, associated synthesis tools, and available intellectual-property cores remain suitable for the production program. An FPGA replacement should be checked for pin compatibility, supported I/O standards, memory resources, configuration interface, timing margins, and thermal performance rather than being selected from capacity alone.
This page combines device specifications, lifecycle guidance, drop-in replacement analysis, application-oriented design notes, and a practical comparison framework. It helps engineers identify whether the exact XC3S1500-5FG456C fits a legacy 456-ball design and which parameters must be revalidated before production migration.
بدائل مباشرة لـ XC3S1500-5FG456C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
XC3S1500-4FG456I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC3S1500-5FGG456C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC3S1500-5FG456C الحدود القصوى والخصائص الكهربائية
| Device Type | Spartan-3 Field Programmable Gate Array |
| System Gates | Approximately 1,500,000 gates |
| Configurable Logic Cells | 29,952 cells |
| Configurable Logic Blocks | 3,328 CLBs |
| Maximum Frequency | 725 MHz |
| Process Technology | 90 nm CMOS |
| Nominal Core Supply Voltage | 1.2 V |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| I/O Count | 333 I/O |
| Block RAM | 432 Kbits |
| العلبة | 456-ball S-PBGA, 23 x 23 mm |
| عدد الأطراف | 456 balls |
| درجة حرارة التشغيل | 0°C to 85°C |
| Performance Grade | -5 commercial speed grade |
| نوع التركيب | Surface Mount |
| Packaging | Tray |
| حالة RoHS | Non-compliant |
دليل تكوين أطراف XC3S1500-5FG456C 456-ball s-pbga, 23 x 23 mm
تكوين الأطراف لـ XC3S1500-5FG456C (حزمة 456-ball s-pbga, 23 x 23 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC3S1500-5FG456C.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC3S1500-5FG456C مناسب لـ 6 التطبيقs: Industrial Control Logic, Data Acquisition Systems, Communications Gateways, Embedded Video Processing, Test and Measurement Instruments, Legacy Interface Consolidation.
Industrial Control Logic
The XC3S1500-5FG456C fits legacy industrial controllers requiring deterministic parallel logic, 333 I/O sites, and 432 Kbits of block RAM. Its 29,952 configurable logic cells can implement sequencers, interlocks, counters, protocol handling, and supervisory control without loading a processor with timing-critical tasks. The 0°C to 85°C commercial rating must remain inside the enclosure's worst-case ambient range. Because the device is obsolete, a new machine should normally use a supported FPGA family unless preserving an existing board, tool flow, or long-lived certification makes reuse necessary.
موصى به
Data Acquisition Systems
The XC3S1500-5FG456C can collect and condition parallel digital data using its 29,952 logic cells and 333 configurable I/O sites. Dedicated block RAM can implement FIFOs, sample buffers, and capture windows, while programmable logic handles channel multiplexing, trigger detection, formatting, and interface timing. Its 725 MHz listed device frequency provides substantial timing margin for many acquisition pipelines, although practical throughput remains governed by external ADC or DAC latency, I/O standards, routing, and timing constraints. The obsolete lifecycle status requires careful long-term supply planning for instrumentation platforms.
موصى به
Communications Gateways
The XC3S1500-5FG456C is useful in legacy communications gateways that must terminate several parallel or low-speed interfaces and perform protocol conversion. Its 333 I/O sites and 3,328 configurable logic blocks can support UART, SPI, serial framing, buffer management, and routing logic, while 432 Kbits of block RAM accommodates packet staging. The 1.2 V core and separate I/O banks permit tailored interface voltages, but every bank must remain within its specified limits. For new network equipment, verify continued tool, IP, security, and lifecycle support before adopting this obsolete device.
موصى به
Embedded Video Processing
The XC3S1500-5FG456C can support legacy pixel pipelines, color processing, test-pattern generation, and interface timing in embedded video equipment. Its programmable interconnect allows parallel datapaths to be tuned for a specific resolution and frame rate, while block RAM can implement line buffers or compact frame stores. The 456-ball package provides 333 user I/O plus dedicated configuration and supply balls, reducing external glue compared with a smaller programmable-logic device. Actual video bandwidth must be checked against I/O timing, memory bandwidth, and the 725 MHz device-speed limit.
موصى به
Test and Measurement Instruments
The XC3S1500-5FG456C is suitable for legacy instrument logic that coordinates acquisition, calibration, trigger sequencing, and display or communications interfaces. Programmable logic can execute precise state machines and parallel algorithms, while the 432 Kbits of embedded RAM provide local storage without an external memory device. Its 333 I/O sites support converters, relay drivers, status indicators, and test ports. For new laboratory equipment, the obsolete lifecycle status should be weighed against the benefits of maintaining a proven Spartan-3 design and its existing verification flow.
موصى به
Legacy Interface Consolidation
The XC3S1500-5FG456C can consolidate several legacy parallel buses, converters, and control signals into one programmable-logic device. With 29,952 configurable logic cells and 333 I/O sites, it accommodates more interface adaptation than a small CPLD while retaining deterministic hardware timing. Multiple I/O banks allow voltage-domain planning for mixed external standards, provided each bank receives a compliant supply. A migration should compare every ball function, configuration mode, and timing constraint rather than relying only on the shared 456-ball package designation.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC3S1500-5FG456C — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC3S1500-4FG456I | XC3S1500-5FGG456C |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | 456-BBGA, 23 x 23 mm | 456-BBGA | 456-BBGA |
| Device Family | Spartan-3 | Spartan-3 | Spartan-3 |
| System Gates | Approximately 1,500,000 gates | Approximately 1,500,000 gates | Approximately 1,500,000 gates |
| Configurable Logic Cells | 29,952 cells | 29,952 cells | 29,952 cells |
| Configurable Logic Blocks | 3,328 CLBs | 3,328 CLBs | 3,328 CLBs |
| Maximum Frequency | 725 MHz | Lower -4 performance grade | 725 MHz |
| I/O Count | 333 I/O | 333 I/O | 333 I/O |
| Core Supply Voltage | 1.2 V nominal | 1.2 V nominal | 1.2 V nominal |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Temperature Grade | Commercial, 0°C to 85°C | Industrial, -40°C to 85°C | Commercial, 0°C to 85°C |
أبرز الفروقات
- Higher speed grade within the same Spartan-3 capacity (مقابلXC3S1500-4FG456I)
- Commercial ordering code matching a 0°C to 85°C application (مقابلXC3S1500-4FG456I)
- Exact FG456 package code retained (مقابلXC3S1500-5FGG456C)
ملاحظات التصميم
Separate the 1.2 V core rail from the I/O-bank supplies and validate every bank's voltage against the selected I/O standards. Place the manufacturer's recommended bulk and high-frequency decoupling capacitors close to the associated supply and ground balls, using short, low-impedance paths. Consider simultaneous switching when sizing the core regulator and copper connections; Estimated: core dissipation equals 1.2 V multiplied by measured core current, after which regulator losses and ambient headroom must be added.
Use the exact 456-ball package drawing and ball map when defining the PCB footprint, pad diameters, solder-mask openings, and assembly process. Do not assume that the FG456 and FGG456 suffix variants are mechanically identical until their drawings have been compared. A fine-pitch BGA also requires a via-in-pad or otherwise validated escape strategy, adequate solder-paste control, and X-ray inspection to reduce hidden solder-joint defects.
Estimate junction temperature from total measured device power, estimated theta_JA, and the actual PCB copper area rather than relying on a generic package number. Estimated: junction rise equals device power multiplied by theta_JA, and junction temperature equals that rise plus ambient temperature. Dense 456-ball routing can produce nonuniform thermal performance, so spreaders, additional plane copper, and controlled enclosure airflow may be necessary even when the ambient is below 85°C.
Do not treat a shared package as proof of a drop-in replacement. Compare configuration pins, dedicated clock and serial pins, I/O-bank supplies, configuration mode, speed grade, temperature grade, and timing guarantees. XC3S1500-4FG456I changes the speed and temperature suffix, while XC3S1500-5FGG456C changes the package suffix. Preserve the original bitstream only after confirming that pin functions and timing constraints remain compatible.
معلومات الامتثال
The product listing identifies the device as RoHS non-compliant. No qualification or declaration for REACH, AEC-Q100, lead-free construction, halogen-free construction, or conflict-minerals compliance is stated for this legacy device.