AMD

XC3S1500-5FG456C - 1.5M Gate Spartan-3 FPGA | AMD

Teilenummer: XC3S1500-5FG456C ✗ Abgekündigt
1.2 V Vdss 456-ball S-PBGA, 23 x 23 mm Package 725 MHz Speed
MOQ: 1 |

XC3S1500-5FG456C Übersicht

The AMD XC3S1500-5FG456C is a Spartan-3 field-programmable gate array with approximately 1.5 million system gates, 29,952 configurable logic cells, 333 I/O sites, and a maximum clock frequency of 725 MHz. It is packaged in a 23 x 23 mm, 456-ball plastic BGA and operates from a nominal 1.2 V core supply, with a 1.14 V to 1.26 V core-voltage range. The commercial-grade -5 suffix supports operation from 0°C to 85°C.

A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, programmable interconnect, block RAM, and dedicated I/O resources are configured after manufacture. Within the product hierarchy, an FPGA sits above simple programmable logic devices and provides parallel hardware implementation for digital control, signal processing, communications, and interface functions without relying on a general-purpose processor for time-critical operations.

The XC3S1500 combines 29,952 configurable logic cells with 3,328 configurable logic blocks and approximately 1.5 million system gates. Its 333 I/O sites support board-level connections, while 432 Kbits of block RAM provide dedicated on-chip storage. The listed 725 MHz figure represents the maximum device operating speed used for timing-oriented designs; actual interface performance depends on the selected clock, I/O standard, routing, logic depth, and timing constraints.

The device uses 90 nm CMOS fabrication and a 1.2 V core architecture. Multiple dedicated I/O banks allow separate voltage domains and selectable I/O standards, making careful bank planning important in mixed-speed designs. Because the FPGA is assembled in a fine-pitch 456-ball BGA, its power delivery, decoupling, via arrangement, and thermal performance depend heavily on multilayer PCB layout and assembly quality.

Typical uses include industrial control, data acquisition, communications gateways, embedded video processing, instrumentation, and legacy interface consolidation. The 333 I/O sites are particularly useful for parallel buses, digital converters, memory interfaces, and multiple low-speed peripherals, while embedded block RAM supports packet buffering, FIFO structures, and local data storage.

For new designs, verify that the Spartan-3 device, associated synthesis tools, and available intellectual-property cores remain suitable for the production program. An FPGA replacement should be checked for pin compatibility, supported I/O standards, memory resources, configuration interface, timing margins, and thermal performance rather than being selected from capacity alone.

This page combines device specifications, lifecycle guidance, drop-in replacement analysis, application-oriented design notes, and a practical comparison framework. It helps engineers identify whether the exact XC3S1500-5FG456C fits a legacy 456-ball design and which parameters must be revalidated before production migration.

Drop-in-Alternativen für XC3S1500-5FG456C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

XC3S1500-4FG456I

✅ Drop-In
AMD
📦 456-BBGA
Spartan-3 field-programmable gate array (FPGA) · Approximately 1,500,000 gates · 29,952 cells · 576 Kb · 333 I/O · 630 MHz · 1.2 V · 90 nm

Preis auf Anfrage

Datenblatt ansehen →

XC3S1500-5FGG456C

✅ Drop-In
📦 456-BBGA
The -5 performance grade and approximately 1.5 million system gates are retained, while the package suffix changes from FG456 to FGG456 and requires package-drawing verification.

📋 Referenzalternative (nicht im Katalog)

XC3S1500-5FG456C Grenzwerte & elektrische Eigenschaften

Device Type Spartan-3 Field Programmable Gate Array
System Gates Approximately 1,500,000 gates
Configurable Logic Cells 29,952 cells
Configurable Logic Blocks 3,328 CLBs
Maximum Frequency 725 MHz
Process Technology 90 nm CMOS
Nominal Core Supply Voltage 1.2 V
Core Supply Voltage Range 1.14 V to 1.26 V
I/O Count 333 I/O
Block RAM 432 Kbits
Gehäuse 456-ball S-PBGA, 23 x 23 mm
Pin-Anzahl 456 balls
Betriebstemperatur 0°C to 85°C
Performance Grade -5 commercial speed grade
Montageart Surface Mount
Packaging Tray
RoHS-Status Non-compliant

XC3S1500-5FG456C 456-ball s-pbga, 23 x 23 mm Pinbelegungsleitfaden

Pinbelegung für XC3S1500-5FG456C (456-ball s-pbga, 23 x 23 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für XC3S1500-5FG456C im 456-ball s-pbga, 23 x 23 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für XC3S1500-5FG456C.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

XC3S1500-5FG456C ist geeignet für 6 Anwendungs: Industrial Control Logic, Data Acquisition Systems, Communications Gateways, Embedded Video Processing, Test and Measurement Instruments, Legacy Interface Consolidation.

🏭

Industrial Control Logic

The XC3S1500-5FG456C fits legacy industrial controllers requiring deterministic parallel logic, 333 I/O sites, and 432 Kbits of block RAM. Its 29,952 configurable logic cells can implement sequencers, interlocks, counters, protocol handling, and supervisory control without loading a processor with timing-critical tasks. The 0°C to 85°C commercial rating must remain inside the enclosure's worst-case ambient range. Because the device is obsolete, a new machine should normally use a supported FPGA family unless preserving an existing board, tool flow, or long-lived certification makes reuse necessary.

📊

Data Acquisition Systems

The XC3S1500-5FG456C can collect and condition parallel digital data using its 29,952 logic cells and 333 configurable I/O sites. Dedicated block RAM can implement FIFOs, sample buffers, and capture windows, while programmable logic handles channel multiplexing, trigger detection, formatting, and interface timing. Its 725 MHz listed device frequency provides substantial timing margin for many acquisition pipelines, although practical throughput remains governed by external ADC or DAC latency, I/O standards, routing, and timing constraints. The obsolete lifecycle status requires careful long-term supply planning for instrumentation platforms.

🌐

Communications Gateways

The XC3S1500-5FG456C is useful in legacy communications gateways that must terminate several parallel or low-speed interfaces and perform protocol conversion. Its 333 I/O sites and 3,328 configurable logic blocks can support UART, SPI, serial framing, buffer management, and routing logic, while 432 Kbits of block RAM accommodates packet staging. The 1.2 V core and separate I/O banks permit tailored interface voltages, but every bank must remain within its specified limits. For new network equipment, verify continued tool, IP, security, and lifecycle support before adopting this obsolete device.

📺

Embedded Video Processing

The XC3S1500-5FG456C can support legacy pixel pipelines, color processing, test-pattern generation, and interface timing in embedded video equipment. Its programmable interconnect allows parallel datapaths to be tuned for a specific resolution and frame rate, while block RAM can implement line buffers or compact frame stores. The 456-ball package provides 333 user I/O plus dedicated configuration and supply balls, reducing external glue compared with a smaller programmable-logic device. Actual video bandwidth must be checked against I/O timing, memory bandwidth, and the 725 MHz device-speed limit.

🔧

Test and Measurement Instruments

The XC3S1500-5FG456C is suitable for legacy instrument logic that coordinates acquisition, calibration, trigger sequencing, and display or communications interfaces. Programmable logic can execute precise state machines and parallel algorithms, while the 432 Kbits of embedded RAM provide local storage without an external memory device. Its 333 I/O sites support converters, relay drivers, status indicators, and test ports. For new laboratory equipment, the obsolete lifecycle status should be weighed against the benefits of maintaining a proven Spartan-3 design and its existing verification flow.

🧩

Legacy Interface Consolidation

The XC3S1500-5FG456C can consolidate several legacy parallel buses, converters, and control signals into one programmable-logic device. With 29,952 configurable logic cells and 333 I/O sites, it accommodates more interface adaptation than a small CPLD while retaining deterministic hardware timing. Multiple I/O banks allow voltage-domain planning for mixed external standards, provided each bank receives a compliant supply. A migration should compare every ball function, configuration mode, and timing constraint rather than relying only on the shared 456-ball package designation.

Zusammenfassung der empfohlenen Produkte

XC3S1500-4FG456I AMD Verwendet in: Industrial Control Logic, Data Acquisition Systems, Communications Gateways, Embedded Video Processing, Test and Measurement Instruments, Legacy Interface Consolidation XC3S1500-5FGG456C Same-family candidate for package cross-reference Verwendet in: Industrial Control Logic, Data Acquisition Systems, Communications Gateways, Embedded Video Processing, Test and Measurement Instruments, Legacy Interface Consolidation
What is XC3S1500-5FG456C?
The XC3S1500-5FG456C is an AMD/Xilinx Spartan-3 FPGA with approximately 1.5 million system gates, 29,952 configurable logic cells, and 333 I/O sites. According to the Spartan-3 FPGA documentation DS099-1, it is a programmable-logic device built on 90 nm CMOS, supplied in a 456-ball S-PBGA package. It is intended for digital control, interface, communications, and embedded data-processing systems where parallel hardware execution is useful.
What are the key specifications of XC3S1500-5FG456C?
The XC3S1500-5FG456C combines 29,952 configurable logic cells, 3,328 configurable logic blocks, approximately 1.5 million system gates, 432 Kbits of block RAM, and 333 I/O sites. The manufacturer documentation lists a maximum device frequency of 725 MHz, a nominal 1.2 V core supply, and a 1.14 V to 1.26 V core-voltage range. The device uses 90 nm CMOS and is packaged in a 23 x 23 mm, 456-ball S-PBGA.
Where can I download the XC3S1500-5FG456C datasheet PDF?
The XC3S1500-5FG456C datasheet can be accessed through the listed datasheet page, which links to Spartan-3 family documentation covering device characteristics, ordering information, and electrical specifications. The relevant family document is identified as DS099-1. Use the manufacturer pin-description and package information when assigning a complete 456-ball layout, and verify revision-specific details against the exact ordering code.
Where can I find the XC3S1500-5FG456C pinout?
The XC3S1500-5FG456C uses a 456-ball S-PBGA package, and its complete ball map is identified in the Spartan-3 package documentation. Use the manufacturer pin-description table to distinguish supply balls, configuration pins, user I/O, clock inputs, and dedicated pins. Because the package contains 456 balls, the PCB footprint and ball assignments must be checked against the exact datasheet revision rather than inferred from the device name.
What is the operating voltage of XC3S1500-5FG456C?
The XC3S1500-5FG456C uses a nominal 1.2 V core supply and has a stated core-voltage range of 1.14 V to 1.26 V. According to the Spartan-3 FPGA documentation DS099-1, I/O banks can use separate supply voltages where supported, so the core rail and every external I/O bank must be checked independently. Decoupling and regulator selection should be based on the device's specific bank configuration and simultaneous switching demand.
What is the operating temperature range of XC3S1500-5FG456C?
The XC3S1500-5FG456C is a commercial-grade device specified for 0°C to 85°C ambient operation. The -5 suffix identifies its speed grade, while the trailing C identifies the commercial temperature range. The manufacturer lists this exact ordering code as obsolete, so engineers should assess obsolescence risk, long-term sourcing, and migration planning rather than treating it as a current production choice.
Is XC3S1500-5FG456C in stock?
Current stock for the XC3S1500-5FG456C should be confirmed through the Request a Quote form on this page rather than inferred from an archived product page. The device is listed as obsolete, and an old listing showing zero stock is not a reliable current availability statement. Provide the required quantity, packaging preference, target date, and any assembly needs so procurement can confirm the actual supply position.
What is the price of XC3S1500-5FG456C?
The current commercial price for XC3S1500-5FG456C must be confirmed through the Request a Quote form on this page because the device is obsolete and its market value can vary with quantity, condition, and remaining inventory. No static price should be used for budgeting an obsolete FPGA without a confirmed quote. Include your annual usage and required traceable packaging details in the request.
What is the lead time for XC3S1500-5FG456C?
The current lead time for XC3S1500-5FG456C is not a fixed manufacturer commitment and should be confirmed through the Request a Quote form on this page. Because this Spartan-3 device is obsolete, supply can come from remaining original inventory rather than active production. A firm lead time should be requested for the specific quantity, package condition, inspection level, and delivery date required by the project.
What is the best drop-in replacement for XC3S1500-5FG456C?
The closest same-package drop-in candidates identified for the XC3S1500-5FG456C are XC3S1500-4FG456I and XC3S1500-5FGG456C, both associated with the 456-ball Spartan-3 package. A replacement still requires verification of speed grade, temperature range, pin functions, I/O standards, configuration behavior, and timing. XC3S1500-4FG456I changes both grade and temperature class, while XC3S1500-5FGG456C changes the package suffix.
Can XC3S1500-4FG456I replace XC3S1500-5FG456C?
The XC3S1500-4FG456I can be considered for a footprint-compatible review because both parts use the 456-ball Spartan-3 package and retain 333 I/O, 29,952 cells, and 1.5 million-gate capacity. It is not an unconditional substitute: the -4 part is a lower speed grade and the I suffix denotes industrial temperature rather than commercial temperature. Re-verify timing closure, thermal requirements, and procurement availability.
Is XC3S1500-5FGG456C the same as XC3S1500-5FG456C?
The XC3S1500-5FGG456C is closely related to the XC3S1500-5FG456C within the Spartan-3 family, but the package suffix indicates a different BGA designation. Cross-reference information associates the two ordering codes, yet engineers should compare the package drawings, ball maps, pin functions, and assembly requirements before calling it a drop-in replacement. PCB footprint equivalence must be proven rather than inferred from the 456-ball marking.
XC3S1500-5FG456C vs XC3S1500-5FGG456C - which is better for an industrial design?
Choose the XC3S1500-5FG456C only when its commercial 0°C to 85°C rating matches the product's ambient requirements. For a wider industrial temperature range, a specifically industrial-rated ordering code should be selected rather than assuming XC3S1500-5FGG456C provides that change. Both parts are legacy Spartan-3 devices, so temperature qualification, timing, supply, and long-term program requirements should all be reviewed before selection.
When should I choose XC3S1500-5FG456C over XC3S1500-4FG456I?
Choose the XC3S1500-5FG456C when the legacy design requires the -5 performance grade and a commercial ambient range from 0°C to 85°C. The XC3S1500-4FG456I is more appropriate only when its lower speed grade still closes timing and its industrial temperature class is required. Both use the same family-level 456-ball footprint, but the -4/-I ordering suffix changes both timing and thermal expectations.
Is XC3S1500-5FG456C suitable for industrial control and data acquisition?
The XC3S1500-5FG456C is suitable for a legacy industrial-control design when its 0°C to 85°C commercial rating satisfies the enclosure temperature and its logic resources meet the design requirements. Its 29,952 cells, 432 Kbits of block RAM, and 333 I/O sites support control logic, local buffering, converters, and parallel peripherals. The obsolete lifecycle status remains a major program risk for new production equipment.
What is the best AMD equivalent for XC3S1500-5FG456C?
The closest AMD/Xilinx family candidates are XC3S1500-4FG456I and XC3S1500-5FGG456C, but neither should be treated as an automatic equivalent. The -4FG456I changes speed and temperature grade, while the -5FGG456C changes the package suffix and requires package-level comparison. For a new product, migrating to a current AMD FPGA family with more resources, tooling support, and lifecycle availability is generally safer than sourcing additional legacy stock.

Technische Referenzdaten für XC3S1500-5FG456C – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose XC3S1500-5FG456C when maintaining an existing design is more important than obtaining a current product, and the required logic, memory, I/O, timing, and commercial temperature conditions match this exact ordering code. Consider XC3S1500-4FG456I when its industrial temperature range is beneficial, its lower speed grade still closes timing, and the footprint has been validated. Consider XC3S1500-5FGG456C when the -5 speed grade and device capacity are desired, but only after the FGG456 package drawing and ball assignments are proven compatible. Neither identified alternative removes the Spartan-3 family's obsolescence and tooling risks. For a new product with no legacy board constraint, migrate to a supported AMD FPGA family and repeat the complete I/O, memory, timing, power, and software-tool evaluation rather than treating a legacy drop-in as a long-term roadmap.

Vergleich mit Alternativen

Parameter Dieses Produkt XC3S1500-4FG456I XC3S1500-5FGG456C
Brand AMD AMD AMD
Package 456-BBGA, 23 x 23 mm 456-BBGA 456-BBGA
Device Family Spartan-3 Spartan-3 Spartan-3
System Gates Approximately 1,500,000 gates Approximately 1,500,000 gates Approximately 1,500,000 gates
Configurable Logic Cells 29,952 cells 29,952 cells 29,952 cells
Configurable Logic Blocks 3,328 CLBs 3,328 CLBs 3,328 CLBs
Maximum Frequency 725 MHz Lower -4 performance grade 725 MHz
I/O Count 333 I/O 333 I/O 333 I/O
Core Supply Voltage 1.2 V nominal 1.2 V nominal 1.2 V nominal
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS
Temperature Grade Commercial, 0°C to 85°C Industrial, -40°C to 85°C Commercial, 0°C to 85°C

Wichtigste Unterscheidungsmerkmale

  • Higher speed grade within the same Spartan-3 capacity (vs. XC3S1500-4FG456I)
  • Commercial ordering code matching a 0°C to 85°C application (vs. XC3S1500-4FG456I)
  • Exact FG456 package code retained (vs. XC3S1500-5FGG456C)

Designhinweise

Separate the 1.2 V core rail from the I/O-bank supplies and validate every bank's voltage against the selected I/O standards. Place the manufacturer's recommended bulk and high-frequency decoupling capacitors close to the associated supply and ground balls, using short, low-impedance paths. Consider simultaneous switching when sizing the core regulator and copper connections; Estimated: core dissipation equals 1.2 V multiplied by measured core current, after which regulator losses and ambient headroom must be added.

Use the exact 456-ball package drawing and ball map when defining the PCB footprint, pad diameters, solder-mask openings, and assembly process. Do not assume that the FG456 and FGG456 suffix variants are mechanically identical until their drawings have been compared. A fine-pitch BGA also requires a via-in-pad or otherwise validated escape strategy, adequate solder-paste control, and X-ray inspection to reduce hidden solder-joint defects.

Estimate junction temperature from total measured device power, estimated theta_JA, and the actual PCB copper area rather than relying on a generic package number. Estimated: junction rise equals device power multiplied by theta_JA, and junction temperature equals that rise plus ambient temperature. Dense 456-ball routing can produce nonuniform thermal performance, so spreaders, additional plane copper, and controlled enclosure airflow may be necessary even when the ambient is below 85°C.

Do not treat a shared package as proof of a drop-in replacement. Compare configuration pins, dedicated clock and serial pins, I/O-bank supplies, configuration mode, speed grade, temperature grade, and timing guarantees. XC3S1500-4FG456I changes the speed and temperature suffix, while XC3S1500-5FGG456C changes the package suffix. Preserve the original bitstream only after confirming that pin functions and timing constraints remain compatible.

Compliance-Informationen

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product listing identifies the device as RoHS non-compliant. No qualification or declaration for REACH, AEC-Q100, lead-free construction, halogen-free construction, or conflict-minerals compliance is stated for this legacy device.

Ähnliche Suchanfragen

xc3s1500 4fgg320c xc3s1500 4fgg456c xilinx xc3s1500 XC3S1500-5FG456C datasheet XC3S1500-5FG456C pinout XC3S1500-5FG456C specifications XC3S1500-5FG456C equivalent XC3S1500-5FG456C replacement XC3S1500-5FG456C price XC3S1500-5FG456C stock XC3S1500-5FG456C vs XC3S1500-4FG456I AMD XC3S1500-5FG456C XC3S1500 456 BBGA footprint XC3S1500 industrial control FPGA

Verwandte Bauteile & Begriffe

AMD Xilinx XC3S1500-5FG456C XC3S1500-4FG456I XC3S1500-5FGG456C Spartan-3 FPGA field-programmable gate array programmable logic configurable logic block CLB block RAM 333 I/O 1.5 million system gates 725 MHz 90 nm CMOS 1.2 V core supply 456-ball S-PBGA BGA surface-mount package industrial control data acquisition communications gateway embedded video processing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen