AMD

XC3S2000-4FG676C - 2M Gate Spartan-3 FPGA | AMD | 676-BGA

MPN: XC3S2000-4FG676C ✗ انتهى عمره الإنتاجي
1.2 V Vdss 676-ball FBGA Package -4 Speed
الحد الأدنى للطلب: 1 |

XC3S2000-4FG676C نظرة عامة

The AMD XC3S2000-4FG676C is a Spartan-3 field-programmable gate array with 2,000,000 system gates, 46,080 logic cells, and a 676-ball fine-pitch ball grid array package. It operates from a 1.2 V core supply and is built on a 90 nm FPGA process. The device provides 489 I/O, approximately 630 MHz performance, and 737,280 bits of block RAM. Its commercial temperature grade is rated from 0 °C to 85 °C.

A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, and input/output blocks. An FPGA belongs to the logic IC hierarchy above programmable logic devices and is used when design-specific parallel hardware must deliver greater throughput or deterministic latency than a microcontroller or DSP can provide. In the system hierarchy, the XC3S2000-4FG676C is an FPGA and a programmable-logic semiconductor.

Key characteristics include 46,080 logic cells, 2 million system gates, 489 user I/O, and 737,280 bits of RAM. The 90 nm process and 1.2 V core operation place the device in a cost-optimized Spartan-3 family intended for high-volume embedded systems. The -4 speed designation identifies a four-speed performance grade, while the commercial suffix identifies the standard temperature grade rather than the industrial range.

The Spartan-3 architecture supports parallel datapath implementation in programmable logic, on-chip block RAM for buffering and lookup functions, and dedicated digital I/O resources. Distributed RAM and dedicated multipliers make the device suitable for image pipelines, protocol termination, control logic, and embedded signal processing. Exact I/O standard support and configuration-memory requirements should be confirmed in the manufacturer's Spartan-3 family documentation before final schematic sign-off.

Typical uses include industrial automation controllers, video and image-processing boards, communications equipment, network appliances, and test-and-measurement instruments. Its 489 I/O allow substantial external connectivity on a single device, while 46,080 logic cells provide enough parallel capacity for multi-channel control or datapath designs. The large 676-ball package also supports high pin counts with dense escape routing.

The primary design consideration is package complexity. A 676-ball FBGA requires careful via-in-pad and escape-routing strategy, strict BGA assembly process control, and adequate thermal spreading beneath the device. Designers should also verify signal integrity for high-speed memory interfaces and observe the recommended configuration, decoupling, and clocking schemes in the manufacturer data sheet.

This page combines the verified device specifications with drop-in Spartan-3 alternatives, a parameter comparison, and practical guidance on BGA layout, signal integrity, configuration, thermal management, and design migration.

بدائل مباشرة لـ XC3S2000-4FG676C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

XC3S2000-4FG676I

✅ بديل مباشر
📦 676-ball FBGA
Same XC3S2000 device, -4 speed grade, 489 I/O, and 1.2 V core; industrial temperature grade replaces the commercial 0 °C to 85 °C rating

📋 بديل مرجعي (غير موجود في الكتالوج)

XC3S2000-4FGG676C

✅ بديل مباشر
📦 676-ball FBGA
Same Spartan-3 resources, -4 speed grade, and 676-ball package; FGG ordering suffix replaces FG and requires mechanical drawing verification

📋 بديل مرجعي (غير موجود في الكتالوج)

XC3S2000-4FGG676I

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 676-ball FBGA
Same Spartan-3 resources and 676-ball package with the FGG suffix; industrial-temperature ordering option replaces the commercial grade

📋 بديل مرجعي (غير موجود في الكتالوج)

XC3S1500-4FGG676C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 676-ball FBGA
Same Spartan-3 family and FGG676 footprint; logic capacity is approximately 25% below XC3S2000, so timing closure and utilization must be revalidated

📋 بديل مرجعي (غير موجود في الكتالوج)

XC3S4000-4FGG676C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 676-ball FBGA
Same Spartan-3 family and FGG676 footprint; logic capacity is approximately 100% above XC3S2000, providing migration headroom at higher resource use

📋 بديل مرجعي (غير موجود في الكتالوج)

XC3S2000-4FG676C الحدود القصوى والخصائص الكهربائية

Device Type Spartan-3 Field Programmable Gate Array (FPGA)
System Gates 2,000,000 gates
Logic Cells 46,080 cells
Block RAM 737,280 bits
User I/O 489 I/O
Core Supply Voltage 1.2 V
Maximum Performance 630 MHz
Process Technology 90 nm
العلبة 676-ball FBGA
عدد الأطراف 676 pins
درجة حرارة التشغيل 0 °C to 85 °C
Speed Grade -4
Temperature Grade Commercial
نوع التركيب Surface Mount
Programming Field-programmable SRAM configuration
Lead-Free Status Lead-free package

دليل تكوين أطراف XC3S2000-4FG676C 676-ball fbga

تكوين الأطراف لـ XC3S2000-4FG676C (حزمة 676-ball fbga). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 676-ball fbga لـ XC3S2000-4FG676C

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC3S2000-4FG676C.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

XC3S2000-4FG676C مناسب لـ 6 التطبيقs: Industrial Automation and Control, Video and Image Processing, Communications Protocol Processing, Test and Measurement Instrumentation, Embedded Signal Processing, Network Appliance Hardware.

🏭

Industrial Automation and Control

The XC3S2000-4FG676C fits industrial machine-control logic where many parallel channels must be handled with predictable latency. Its 46,080 logic cells can implement motion sequencing, interlocks, encoder decoding, and discrete I/O control, while 489 I/O provide substantial connectivity for field buses and sensor interfaces. The 1.2 V core supply and 90 nm process support a cost-focused embedded architecture. For the 676-ball FBGA, use a manufacturer-recommended escape layout, continuous power and ground planes, and adequate copper spreading beneath the device. If the equipment may operate above 85 °C, the XC3S2000-4FG676I provides the corresponding industrial-temperature route.

📺

Video and Image Processing

The XC3S2000-4FG676C is suitable for parallel image pipelines that require logic and buffer resources rather than a single high-speed processor core. The 737,280 bits of block RAM can hold multiple scan-line buffers, while the 46,080 logic cells can support pixel manipulation, thresholding, color conversion, and timing control. The device reaches approximately 630 MHz under the listed conditions, allowing multi-pixel operations per system clock. A practical implementation places external memory or capture interfaces near the BGA escape paths, then uses dedicated clocking to prevent skew from degrading the datapath. The 676-ball package gives access to 489 I/O, reducing the need for additional interface logic.

🌐

Communications Protocol Processing

The XC3S2000-4FG676C can serve as a protocol-processing front end for routers, bridges, and communication adapters. Its programmable logic supports parallel framing, channel multiplexing, clock-domain crossing, and packet-filtering functions, while 489 I/O allow multiple interfaces to be consolidated on one device. The 1.2 V core operates from a standard FPGA power architecture, and the approximately 630 MHz performance class provides ample headroom for multi-lane datapaths. Engineers should constrain source-synchronous interfaces, match external memory timing, and reserve routing capacity for the BGA escape network. Because a 676-ball device can create dense routing congestion, utilization and timing closure should be monitored early rather than after the design is complete.

🖥️

Test and Measurement Instrumentation

The XC3S2000-4FG676C is well suited to modular test equipment that must coordinate many channels, timing sequences, and data-capture functions. Parallel logic can implement pattern generation, acquisition control, and analysis pipelines, while the 737,280 bits of block RAM provide local buffering between acquisition and processing stages. With 489 I/O, the device can directly connect external converters, triggering circuitry, and communication controllers. A disciplined BGA layout is essential: use short escape routes for clocks and data, maintain continuous reference-plane returns, and place decoupling close to device supply balls. The commercial temperature rating supports controlled indoor test systems, while the industrial variant covers harsher ambient conditions.

⚡

Embedded Signal Processing

The XC3S2000-4FG676C can implement fixed-function signal processing alongside control logic when deterministic parallel throughput is more important than sequential software execution. The 46,080 logic cells support filter stages, correlation functions, digital formatting, and decision logic, while dedicated block RAM supports sample buffering and lookup operations. Its approximately 630 MHz performance class enables several pipeline stages to run concurrently. Designers should use synchronous clocking throughout each pipeline and register data at block-RAM boundaries to achieve predictable timing. The 676-ball FBGA offers enough I/O for converters and sensors, but routing density must be monitored carefully. For designs requiring more parallel capacity, the XC3S4000 in the same family offers additional logic headroom.

🧩

Network Appliance Hardware

The XC3S2000-4FG676C fits network appliances that require hardware-assisted packet handling, buffering, and administrative control. Dedicated block RAM can implement packet queues, while programmable logic can perform header inspection, traffic classification, and aggregation. The 489 available I/O allow memory interfaces, transceivers, management ports, and status signals to be integrated on a single device. At approximately 630 MHz, the -4 speed grade supports demanding parallel pipelines without requiring a soft processor for every task. High-speed interfaces should use controlled-impedance routing with uninterrupted reference planes, and power delivery should follow the manufacturer's multi-rail distribution guidance. The 676-ball package requires advanced assembly capability, making it appropriate for established high-volume production environments.

ملخص المنتجات الموصى بها

XC3S2000-4FG676I Industrial-temperature Spartan-3 alternative يُستخدم في: Industrial Automation and Control, Communications Protocol Processing, Network Appliance Hardware XC3S2000-4FGG676C Commercial-temperature package alternative يُستخدم في: Industrial Automation and Control, Communications Protocol Processing, Network Appliance Hardware XC3S2000-4FGG676I Lead-free package and temperature-grade alternative يُستخدم في: Video and Image Processing, Test and Measurement Instrumentation XC3S1500-4FGG676C Lower-density same-footprint migration option يُستخدم في: Video and Image Processing, Embedded Signal Processing XC3S4000-4FGG676C Higher-density same-family migration option يُستخدم في: Test and Measurement Instrumentation, Embedded Signal Processing
What is the AMD XC3S2000-4FG676C?
The AMD XC3S2000-4FG676C is a Spartan-3 FPGA providing 2,000,000 system gates, 46,080 logic cells, 489 I/O, and 737,280 bits of block RAM in a 676-ball FBGA package. According to the Spartan-3 family documentation, it uses a 90 nm process with a 1.2 V core supply. The -4 suffix identifies its speed grade, while the final C indicates the commercial temperature class.
What are the key specifications of XC3S2000-4FG676C that engineers should know?
The XC3S2000-4FG676C combines 46,080 logic cells, 2 million system gates, 489 user I/O, and 737,280 bits of block RAM in a 676-ball FBGA. The device operates from a 1.2 V core supply, uses a 90 nm process, and reaches approximately 630 MHz under the listed operating conditions. Its commercial temperature range is 0 °C to 85 °C, making it suitable for indoor commercial and industrial equipment without an extended-temperature requirement.
Where can I download the XC3S2000-4FG676C datasheet PDF?
The XC3S2000-4FG676C datasheet and its related Spartan-3 family documentation can be accessed through the Xilinx datasheet link listed on this page. The device is covered by the Spartan-3 FPGA Family Data Sheet identified as DS099-1. Use the family documentation for ordering information, package details, electrical characteristics, DC and switching specifications, configuration data, and pinout information.
Where can I find the XC3S2000-4FG676C pinout and package drawing?
The XC3S2000-4FG676C pinout, ball assignments, and 676-ball package drawing are published in the Spartan-3 family data sheet and its associated package documentation. Because the device uses a fine-pitch BGA, component placement and escape routing must follow the exact ball map rather than a generic 676-pin diagram. The recommended footprint and land pattern should be checked against the current assembly and PCB design rules.
What can replace the XC3S2000-4FG676C?
The XC3S2000-4FG676I is a direct same-footprint choice when an industrial temperature rating is required, because it retains the -4 speed grade, 676-ball package, 46,080 logic cells, 489 I/O, and 1.2 V core architecture. The XC3S2000-4FGG676C and XC3S2000-4FGG676I offer corresponding lead-free package variants where their ordering codes match the PCB and sourcing plan.
Is the XC3S2000-4FG676C the same as the XC3S2000-4FG676I?
The XC3S2000-4FG676C and XC3S2000-4FG676I share the same Spartan-3 XC3S2000 device, -4 speed grade, 676-ball package, and core architecture, but their temperature grades differ. The C version is specified for 0 °C to 85 °C, while the I version is the industrial-temperature choice. Confirm the order code, PCB footprint, and environmental requirements before exchanging the two devices.
What is the best industrial-temperature replacement for XC3S2000-4FG676C?
The AMD XC3S2000-4FG676I is the most direct industrial-temperature alternative because it retains the same Spartan-3 XC3S2000 configuration, -4 speed grade, 676-ball FBGA package, and 1.2 V core supply. Its distinguishing feature is the extended industrial temperature qualification. The alternative should still be checked against the original bill of materials for clocking, configuration, and exact package suffix.
What is the difference between XC3S2000-4FG676C and XC3S2000-4FGG676C?
Both devices are listed as Spartan-3 FPGAs with 2,000,000 system gates, 737,280 bits of RAM, 46,080 logic cells, and a 676-ball package. The ordering-code difference is the package suffix: FG on the original part and FGG on the alternative. Engineers should verify the mechanical drawing, ball map, and lead-free production requirements rather than assuming that all 676-ball designations are mechanically identical.
When should I choose XC3S2000-4FG676C over a smaller Spartan-3 device?
Choose the XC3S2000-4FG676C when a design needs more than 46,080 logic cells, 489 I/O, or large parallel datapaths without moving to a higher-capacity device. It is particularly useful for multi-channel control, image buffering, protocol aggregation, and test systems. A smaller XC3S1500-class device may reduce cost and routing pressure when utilization remains well below the XC3S2000 capacity.
When should I choose XC3S2000-4FG676C over XC3S4000?
Choose the XC3S2000-4FG676C when 46,080 logic cells and 489 I/O satisfy the design and a lower-capacity device offers better cost and routing efficiency. Choose an XC3S4000-class part only when the design cannot fit within the XC3S2000 resources or needs the additional density. Same-family migration can preserve the board outline in some footprints, but timing closure and resource utilization still require separate verification.
Is XC3S2000-4FG676C suitable for an industrial automation controller?
The XC3S2000-4FG676C is suitable for commercial-temperature industrial automation equipment that operates between 0 °C and 85 °C. Its 46,080 logic cells can host parallel control logic, while 489 I/O provide substantial connectivity for field buses and discrete interfaces. If the enclosure can exceed 85 °C or requires an industrial temperature grade, specify the XC3S2000-4FG676I instead.
What is the price of XC3S2000-4FG676C?
Current commercial pricing for the XC3S2000-4FG676C is not stated in a static product paragraph because legacy FPGA prices vary with quantity, condition, and market availability. Use the Request a Quote form on this page to request current unit pricing, volume breaks, stock confirmation, and a lead-time quotation for the exact 676-ball order code. The request should identify the required temperature grade, packing format, and production quantity.
What is the lead time for XC3S2000-4FG676C?
The current lead time for this legacy Spartan-3 FPGA should be confirmed through the Request a Quote form on this page rather than assumed from historical catalog data. Include the exact suffix XC3S2000-4FG676C, required quantity, date code constraints, and whether an industrial-temperature substitute is acceptable. The supplier can then check current availability and scheduled allocation for the specified package.
Where can I buy XC3S2000-4FG676C online?
Use the Request a Quote form on this page to request availability and a formal quotation for the XC3S2000-4FG676C. Because this is an older Spartan-3 FPGA, stock can vary significantly by package suffix, temperature grade, and lot. Specify whether the XC3S2000-4FG676I industrial-temperature version may be quoted as an alternative so that sourcing can evaluate both exact and functional replacement routes.
Is XC3S2000-4FG676C in stock?
Stock status for the XC3S2000-4FG676C must be confirmed for the exact order code at the time of quotation. Use the Request a Quote form on this page and provide the required quantity, packaging preference, and acceptable lead time. For production planning, include whether obsolete, refurbished, or industrial-temperature alternatives may be considered only after their mechanical, electrical, and temperature requirements have been reviewed.
What design constraints matter when laying out a 676-ball Spartan-3 FPGA?
The 676-ball FBGA requires a manufacturer-recommended land pattern, controlled via-in-pad or microvia construction where appropriate, and escape routing that minimizes stubs on sensitive signals. Decoupling should follow the manufacturer's distribution-network recommendations, and clock and high-speed memory routes require controlled impedance and return-path continuity. Thermal analysis must include the package, board copper, vias, and the actual logic utilization of the design.

بيانات مرجعية هندسية لـ XC3S2000-4FG676C — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the XC3S2000-4FG676C when the design fits within 46,080 logic cells, 737,280 bits of block RAM, and 489 I/O, and its 0 °C to 85 °C commercial rating is sufficient. Select the XC3S2000-4FG676I when the same electrical and logical design must operate across the industrial temperature range. The XC3S2000-4FGG676C or XC3S2000-4FGG676I may fit lead-free package and sourcing requirements, but the exact package drawing and ball map must match the PCB. Consider XC3S1500-4FGG676C only when its reduced capacity comfortably supports the design and cost is the priority. Consider XC3S4000-4FGG676C when the XC3S2000 lacks sufficient logic, routing, or memory resources. For every migration, rerun synthesis, timing analysis, power estimation, and PCB ball-map verification.

المقارنة مع البدائل

المعامل هذا المنتج XC3S2000-4FG676I XC3S2000-4FGG676C XC3S2000-4FGG676I XC3S1500-4FGG676C XC3S4000-4FGG676C
Brand AMD AMD AMD AMD AMD AMD
Package 676-ball FBGA 676-ball FBGA 676-ball FBGA 676-ball FBGA 676-ball FBGA 676-ball FBGA

أبرز الفروقات

  • Direct commercial-to-industrial temperature migration (مقابلXC3S2000-4FG676I)
  • Full-density Spartan-3 resource set (مقابلXC3S1500-4FGG676C)
  • High I/O integration for complex embedded boards (مقابلXC3S2000-4FGG676C)
  • Headroom for parallel datapath expansion (مقابلXC3S2000-4FG676C)

ملاحظات التصميم

Use the manufacturer-recommended 676-ball FBGA land pattern and escape-routing geometry for the selected package suffix. Fine-pitch BGA assembly benefits from short escape paths, symmetrical via placement, and a via-in-pad or microvia strategy where the fabrication process permits it. Keep high-speed clock and memory nets away from dense power via fields, and preserve uninterrupted reference-plane returns under every routed interface. Validate the stack-up and escape length with signal-integrity simulation before fabrication.

Implement the manufacturer's recommended multi-rail power architecture, including clean 1.2 V core distribution and the required I/O supply arrangements. Place small decoupling capacitors close to supply and ground balls, and use larger bulk capacitance on the board to support transient current demanded by 46,080 logic cells. Separate or carefully sequence noisy external supplies from sensitive logic rails. Verify voltage droop at the device balls rather than relying only on measurements at the power connector.

Estimate junction temperature using the actual switching activity of the design, package thermal data, board construction, and copper spreading beneath the BGA. Estimated: at 85 °C ambient, every 1 W of device dissipation contributes approximately the number of watts multiplied by the package-to-ambient thermal resistance in °C/W to the junction-temperature rise. Maintain uninterrupted ground planes and via arrays so heat can move from the die into the board rather than being trapped between dense signal escapes.

Do not treat the FG and FGG ordering suffixes as interchangeable without checking the package drawing and ball map. Also avoid assuming that a same-family XC3S1500 or XC3S4000 migration preserves timing: the lower-density device has less logic and routing headroom, while the higher-density device changes utilization and power characteristics. Review configuration memory, clock requirements, pin constraints, and timing closure in the manufacturer Spartan-3 design flow before releasing a substitute to production.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The package is identified as lead-free. RoHS, REACH, halogen-free, and conflict-minerals statements were not established for this exact ordering code.

تم التحقق من البيانات في: 2026-11-15 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

xc3s2000 4fgg456i xc3s2000 4fgg676i xilinx xc3s2000 XC3S2000-4FG676C datasheet XC3S2000-4FG676C pinout XC3S2000-4FG676C datasheet pdf XC3S2000-4FG676C specifications XC3S2000-4FG676C equivalent XC3S2000-4FG676C replacement XC3S2000-4FG676C vs XC3S2000-4FG676I XC3S2000-4FG676C 676 BGA footprint XC3S2000-4FG676C price XC3S2000-4FG676C stock AMD XC3S2000 FPGA

المكونات والمصطلحات ذات الصلة

AMD Xilinx XC3S2000-4FG676C XC3S2000-4FG676I XC3S2000-4FGG676C XC3S2000-4FGG676I XC3S1500-4FGG676C XC3S4000-4FGG676C Spartan-3 field-programmable gate array FPGA programmable logic device logic cell system gate block RAM field-programmable gate array fine-pitch ball grid array 676-ball FBGA surface-mount semiconductor 90 nm process technology 1.2 V core supply 489 user I/O 737,280 bits of RAM 630 MHz performance industrial automation video processing protocol processing test and measurement network appliances embedded signal processing RoHS REACH AEC-Q100 lead-free packaging
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر