XC3S2000-4FG676C - 2M Gate Spartan-3 FPGA | AMD | 676-BGA
부품 번호: XC3S2000-4FG676C ✗ 단종XC3S2000-4FG676C 개요
A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, and input/output blocks. An FPGA belongs to the logic IC hierarchy above programmable logic devices and is used when design-specific parallel hardware must deliver greater throughput or deterministic latency than a microcontroller or DSP can provide. In the system hierarchy, the XC3S2000-4FG676C is an FPGA and a programmable-logic semiconductor.
Key characteristics include 46,080 logic cells, 2 million system gates, 489 user I/O, and 737,280 bits of RAM. The 90 nm process and 1.2 V core operation place the device in a cost-optimized Spartan-3 family intended for high-volume embedded systems. The -4 speed designation identifies a four-speed performance grade, while the commercial suffix identifies the standard temperature grade rather than the industrial range.
The Spartan-3 architecture supports parallel datapath implementation in programmable logic, on-chip block RAM for buffering and lookup functions, and dedicated digital I/O resources. Distributed RAM and dedicated multipliers make the device suitable for image pipelines, protocol termination, control logic, and embedded signal processing. Exact I/O standard support and configuration-memory requirements should be confirmed in the manufacturer's Spartan-3 family documentation before final schematic sign-off.
Typical uses include industrial automation controllers, video and image-processing boards, communications equipment, network appliances, and test-and-measurement instruments. Its 489 I/O allow substantial external connectivity on a single device, while 46,080 logic cells provide enough parallel capacity for multi-channel control or datapath designs. The large 676-ball package also supports high pin counts with dense escape routing.
The primary design consideration is package complexity. A 676-ball FBGA requires careful via-in-pad and escape-routing strategy, strict BGA assembly process control, and adequate thermal spreading beneath the device. Designers should also verify signal integrity for high-speed memory interfaces and observe the recommended configuration, decoupling, and clocking schemes in the manufacturer data sheet.
This page combines the verified device specifications with drop-in Spartan-3 alternatives, a parameter comparison, and practical guidance on BGA layout, signal integrity, configuration, thermal management, and design migration.
드롭인 대체품: XC3S2000-4FG676C — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
XC3S2000-4FG676I
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S2000-4FGG676C
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC3S2000-4FGG676I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC3S1500-4FGG676C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC3S4000-4FGG676C
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC3S2000-4FG676C 최대 정격 & 전기적 특성
| Device Type | Spartan-3 Field Programmable Gate Array (FPGA) |
| System Gates | 2,000,000 gates |
| Logic Cells | 46,080 cells |
| Block RAM | 737,280 bits |
| User I/O | 489 I/O |
| Core Supply Voltage | 1.2 V |
| Maximum Performance | 630 MHz |
| Process Technology | 90 nm |
| 패키지 | 676-ball FBGA |
| 핀 수 | 676 pins |
| 동작 온도 | 0 °C to 85 °C |
| Speed Grade | -4 |
| Temperature Grade | Commercial |
| 실장 유형 | Surface Mount |
| Programming | Field-programmable SRAM configuration |
| Lead-Free Status | Lead-free package |
XC3S2000-4FG676C 676-ball fbga 핀 구성 가이드
XC3S2000-4FG676C(676-ball fbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC3S2000-4FG676C.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC3S2000-4FG676C 적합 용도: 6 애플리케이션s: Industrial Automation and Control, Video and Image Processing, Communications Protocol Processing, Test and Measurement Instrumentation, Embedded Signal Processing, Network Appliance Hardware.
Industrial Automation and Control
The XC3S2000-4FG676C fits industrial machine-control logic where many parallel channels must be handled with predictable latency. Its 46,080 logic cells can implement motion sequencing, interlocks, encoder decoding, and discrete I/O control, while 489 I/O provide substantial connectivity for field buses and sensor interfaces. The 1.2 V core supply and 90 nm process support a cost-focused embedded architecture. For the 676-ball FBGA, use a manufacturer-recommended escape layout, continuous power and ground planes, and adequate copper spreading beneath the device. If the equipment may operate above 85 °C, the XC3S2000-4FG676I provides the corresponding industrial-temperature route.
추천
Video and Image Processing
The XC3S2000-4FG676C is suitable for parallel image pipelines that require logic and buffer resources rather than a single high-speed processor core. The 737,280 bits of block RAM can hold multiple scan-line buffers, while the 46,080 logic cells can support pixel manipulation, thresholding, color conversion, and timing control. The device reaches approximately 630 MHz under the listed conditions, allowing multi-pixel operations per system clock. A practical implementation places external memory or capture interfaces near the BGA escape paths, then uses dedicated clocking to prevent skew from degrading the datapath. The 676-ball package gives access to 489 I/O, reducing the need for additional interface logic.
추천
Communications Protocol Processing
The XC3S2000-4FG676C can serve as a protocol-processing front end for routers, bridges, and communication adapters. Its programmable logic supports parallel framing, channel multiplexing, clock-domain crossing, and packet-filtering functions, while 489 I/O allow multiple interfaces to be consolidated on one device. The 1.2 V core operates from a standard FPGA power architecture, and the approximately 630 MHz performance class provides ample headroom for multi-lane datapaths. Engineers should constrain source-synchronous interfaces, match external memory timing, and reserve routing capacity for the BGA escape network. Because a 676-ball device can create dense routing congestion, utilization and timing closure should be monitored early rather than after the design is complete.
추천
Test and Measurement Instrumentation
The XC3S2000-4FG676C is well suited to modular test equipment that must coordinate many channels, timing sequences, and data-capture functions. Parallel logic can implement pattern generation, acquisition control, and analysis pipelines, while the 737,280 bits of block RAM provide local buffering between acquisition and processing stages. With 489 I/O, the device can directly connect external converters, triggering circuitry, and communication controllers. A disciplined BGA layout is essential: use short escape routes for clocks and data, maintain continuous reference-plane returns, and place decoupling close to device supply balls. The commercial temperature rating supports controlled indoor test systems, while the industrial variant covers harsher ambient conditions.
추천
Embedded Signal Processing
The XC3S2000-4FG676C can implement fixed-function signal processing alongside control logic when deterministic parallel throughput is more important than sequential software execution. The 46,080 logic cells support filter stages, correlation functions, digital formatting, and decision logic, while dedicated block RAM supports sample buffering and lookup operations. Its approximately 630 MHz performance class enables several pipeline stages to run concurrently. Designers should use synchronous clocking throughout each pipeline and register data at block-RAM boundaries to achieve predictable timing. The 676-ball FBGA offers enough I/O for converters and sensors, but routing density must be monitored carefully. For designs requiring more parallel capacity, the XC3S4000 in the same family offers additional logic headroom.
추천
Network Appliance Hardware
The XC3S2000-4FG676C fits network appliances that require hardware-assisted packet handling, buffering, and administrative control. Dedicated block RAM can implement packet queues, while programmable logic can perform header inspection, traffic classification, and aggregation. The 489 available I/O allow memory interfaces, transceivers, management ports, and status signals to be integrated on a single device. At approximately 630 MHz, the -4 speed grade supports demanding parallel pipelines without requiring a soft processor for every task. High-speed interfaces should use controlled-impedance routing with uninterrupted reference planes, and power delivery should follow the manufacturer's multi-rail distribution guidance. The 676-ball package requires advanced assembly capability, making it appropriate for established high-volume production environments.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC3S2000-4FG676C — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC3S2000-4FG676I | XC3S2000-4FGG676C | XC3S2000-4FGG676I | XC3S1500-4FGG676C | XC3S4000-4FGG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA | 676-ball FBGA |
주요 차별점
- Direct commercial-to-industrial temperature migration (vs XC3S2000-4FG676I)
- Full-density Spartan-3 resource set (vs XC3S1500-4FGG676C)
- High I/O integration for complex embedded boards (vs XC3S2000-4FGG676C)
- Headroom for parallel datapath expansion (vs XC3S2000-4FG676C)
설계 노트
Use the manufacturer-recommended 676-ball FBGA land pattern and escape-routing geometry for the selected package suffix. Fine-pitch BGA assembly benefits from short escape paths, symmetrical via placement, and a via-in-pad or microvia strategy where the fabrication process permits it. Keep high-speed clock and memory nets away from dense power via fields, and preserve uninterrupted reference-plane returns under every routed interface. Validate the stack-up and escape length with signal-integrity simulation before fabrication.
Implement the manufacturer's recommended multi-rail power architecture, including clean 1.2 V core distribution and the required I/O supply arrangements. Place small decoupling capacitors close to supply and ground balls, and use larger bulk capacitance on the board to support transient current demanded by 46,080 logic cells. Separate or carefully sequence noisy external supplies from sensitive logic rails. Verify voltage droop at the device balls rather than relying only on measurements at the power connector.
Estimate junction temperature using the actual switching activity of the design, package thermal data, board construction, and copper spreading beneath the BGA. Estimated: at 85 °C ambient, every 1 W of device dissipation contributes approximately the number of watts multiplied by the package-to-ambient thermal resistance in °C/W to the junction-temperature rise. Maintain uninterrupted ground planes and via arrays so heat can move from the die into the board rather than being trapped between dense signal escapes.
Do not treat the FG and FGG ordering suffixes as interchangeable without checking the package drawing and ball map. Also avoid assuming that a same-family XC3S1500 or XC3S4000 migration preserves timing: the lower-density device has less logic and routing headroom, while the higher-density device changes utilization and power characteristics. Review configuration memory, clock requirements, pin constraints, and timing closure in the manufacturer Spartan-3 design flow before releasing a substitute to production.
규정 준수 정보
The package is identified as lead-free. RoHS, REACH, halogen-free, and conflict-minerals statements were not established for this exact ordering code.