XC3S50AN-4TQG144C - Spartan-3AN FPGA, 144-LQFP | AMD
MPN: XC3S50AN-4TQG144C ✓ نشطXC3S50AN-4TQG144C نظرة عامة
A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, block RAM, programmable input/output, and dedicated clocking resources implement digital systems that would otherwise require multiple programmable or fixed-function devices. Within the product hierarchy, an FPGA contains lookup tables, flip-flops, dedicated block RAM, digital clock managers, and general-purpose I/O blocks. The Spartan-3AN family combines FPGA logic with on-chip configuration flash for nonvolatile configuration and data-storage applications.
Key resources include 55,296 system gates, 1,584 Kbit of block RAM, and 108 user I/O. The TQG144 designation identifies the leaded 144-pin package, while the trailing C identifies the commercial product grade. Its 144-pin LQFP footprint supports board-level assembly and inspection processes that are common in mixed-signal and control-system hardware. Programmable I/O supports multiple voltage standards and interfaces according to the device configuration.
The Spartan-3AN architecture combines configurable logic with dedicated memory and nonvolatile configuration flash. Designers can implement parallel datapaths, control state machines, communication interfaces, and data buffering without external logic devices. Because configuration data can be stored in the on-chip flash, the FPGA can retain its programmed configuration when power is removed, a useful characteristic for appliance controllers, industrial controls, and embedded equipment that must resume operation after power interruption.
Typical applications include industrial automation controllers, data-acquisition and instrumentation systems, industrial networking equipment, embedded video-processing front ends, and consumer or communications products with parallel bus interfaces. The 108 available I/O allow dedicated connections to external data converters, memory devices, transceivers, and control logic while retaining package-level integration on a single board.
When laying out a board, treat the 144-pin LQFP footprint and its thermal performance as primary constraints. Follow the AMD Spartan-3AN pinout and configuration guidance for every power, ground, clock, configuration, and user-I/O connection. Validate the selected I/O standard, voltage, and drive configuration against the attached circuitry, and review the complete AMD Spartan-3AN Family Data Sheet before releasing the PCB layout.
This page consolidates device resources, package details, drop-in ordering alternatives, comparison parameters, and practical design guidance for engineers evaluating the XC3S50AN-4TQG144C in a new programmable-logic design.
بدائل مباشرة لـ XC3S50AN-4TQG144C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC3S50AN-4TQG144C (نفس عامل الشكل والبصمة) — يختلف في Package, Device Type, Process Technology, System Gates, FPGA Family.
XC3S50AN-4TQG144I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC3S50AN-4TQ144I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC3S50A-4TQG144I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC3S50AN-4TQG144C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC3S50AN-5TQG144C
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC3S50AN-6TQG144C
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC3S50AN-4TQG144C الحدود القصوى والخصائص الكهربائية
| Device Type | Spartan-3AN FPGA |
| System Gates | 55,296 |
| Block RAM | 1,584 Kbit |
| User I/O | 108 |
| Speed Grade | -4 |
| العلبة | 144-LQFP / TQFP-144 |
| Package Dimensions | 20 x 20 mm |
| نوع التركيب | Surface Mount |
| Temperature Grade | Commercial |
| درجة حرارة التشغيل | 0 °C to 85 °C |
| Programmable Logic Technology | FPGA |
| Configuration Memory | On-chip nonvolatile configuration flash |
| Programmable I/O | 108 user I/O |
| حالة RoHS | Compliant |
دليل تكوين أطراف XC3S50AN-4TQG144C 20 x 20 mm
تكوين الأطراف لـ XC3S50AN-4TQG144C (حزمة 20 x 20 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC3S50AN-4TQG144C.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC3S50AN-4TQG144C مناسب لـ 6 التطبيقs: Industrial Automation and Control, Data Acquisition and Instrumentation, Industrial Networking Gateways, Embedded Video and Image Preprocessing, Appliance and Consumer Controllers, Programmable Logic Education and Prototyping.
Industrial Automation and Control
The XC3S50AN-4TQG144C suits machine-control logic where one FPGA can combine sequencing, interlocks, counters, and communications interfaces. Its 55,296 system gates and 1,584 Kbit of block RAM provide capacity for parallel control paths and moderate data buffering, while 108 user I/O support discrete sensors, actuators, and industrial buses. The commercial 0 °C to 85 °C range fits enclosed indoor controllers operating away from extreme temperatures. For deployments with wider environmental requirements, select the industrial-temperature TQG144I variant and revalidate the timing design.
موصى به
Data Acquisition and Instrumentation
The Spartan-3AN device can implement parallel sampling control, digital filtering, and data buffering in measurement equipment. Its 108 I/O support multiple converters and front-end devices, while 1,584 Kbit of block RAM can hold transfer buffers, calibration tables, or intermediate results. The -4 speed grade provides a defined performance target for clocked processing paths. Because the XC3S50AN-4TQG144C is a commercial-grade part, place it in an instrument enclosure with controlled temperature rise and avoid designs requiring operation outside 0 °C to 85 °C.
موصى به
Industrial Networking Gateways
XC3S50AN-4TQG144C can implement protocol conversion, packet buffering, and parallel data routing in industrial communication equipment. Its 108 user I/O allow the FPGA to connect directly to network transceivers, processors, and status logic, while on-chip block RAM reduces the need for external buffering in moderate-throughput paths. The 144-pin LQFP package is also practical for serviceable and visually inspectable industrial boards. Verify transceiver interface voltage levels and supported I/O standards in the AMD device documentation before assigning the pins.
موصى به
Embedded Video and Image Preprocessing
The device is suitable for parallel pipeline stages such as pixel formatting, thresholding, timing generation, and interface timing. The available 108 I/O can connect parallel sensors or downstream processors, and 1,584 Kbit of block RAM can support line buffers or short video-processing stages. Its -4 speed grade is important when the design includes fixed clock-domain timing, so timing constraints should be applied to every synchronous pipeline. For high-speed serial video interfaces, external transceivers or suitable alternative FPGA families may be required because the interface characteristics are configuration dependent.
موصى به
Appliance and Consumer Controllers
The XC3S50AN-4TQG144C fits cost-sensitive appliance controllers that combine user-interface logic, motor sequencing, switch handling, and communication support. On-chip nonvolatile configuration flash preserves the programmed logic across power cycles, while the 108 I/O offer ample connections to keys, displays, relays, and sensors. The commercial temperature rating suits indoor products with controlled ambient conditions. Confirm the supported I/O standards and configuration behavior of the exact package before layout, and use the on-chip flash only for applications supported by the device documentation.
موصى به
Programmable Logic Education and Prototyping
This Spartan-3AN device provides a practical platform for education, training, and control-prototype development because it combines programmable logic, block RAM, extensive I/O, and a familiar leaded package. Students can implement counters, state machines, processors, interfaces, and small accelerators without building a multilayer board around a fine-pitch device. The 144-pin package is also convenient for prototype boards, although every design must still honor the package's pin assignments, supply requirements, and configuration interface. Commercial availability for prototypes does not imply long-term supply for production designs.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC3S50AN-4TQG144C — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC3S50AN-4TQG144I | XC3S50AN-4TQ144I | XC3S50A-4TQG144I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 144-LQFP / TQFP-144 | 144-LQFP / TQFP-144 | 144-LQFP / TQFP-144 | 144-LQFP / TQFP-144 |
| FPGA Family | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3A |
| Speed Grade | -4 | -4 | -4 | -4 |
| Temperature Class | Commercial, 0 °C to 85 °C | Industrial | Industrial | Industrial |
| On-Chip Nonvolatile Configuration Flash | Yes | Yes | Yes | No |
أبرز الفروقات
- Retains 55,296 system gates and 1,584 Kbit of block RAM in the 144-pin package (مقابلXC3S50AN-4TQG144I)
- Commercial-grade ordering option (مقابلXC3S50AN-4TQG144I)
- Adds on-chip nonvolatile configuration flash (مقابلXC3S50A-4TQG144I)
- Provides a higher timing target than lower speed-grade family options (مقابلXC3S50AN-5TQG144C)
ملاحظات التصميم
Assign every power and ground pin according to the AMD Spartan-3AN Family Data Sheet rather than treating them as interchangeable supply connections. The device includes multiple supply groups with defined sequencing and decoupling requirements. Place the required capacitors at the associated pins with short, low-inductance traces, and route ground returns through an uninterrupted plane. Validate voltage limits against the selected I/O standard and the attached external circuits before releasing the layout.
Use the 144-pin package land pattern from the AMD package documentation and verify it against the board library before fabrication. The LQFP body is 20 x 20 mm, but the board footprint must follow the specified lead geometry and tolerances rather than relying on nominal body dimensions. Preserve access to configuration, clock, and JTAG-related functions, and avoid placing tall components that could interfere with inspection or rework operations.
Apply explicit timing constraints to every clocked path and treat the -4 speed grade as the basis for establishing implementation targets. Reserve user I/O for compatible voltage standards and check drive, slew, and pull-up options in the device documentation. For interfaces feeding external transceivers or converters, keep clocked outputs away from sensitive analog inputs and use a ground reference strategy that minimizes return-path discontinuities.
Do not substitute XC3S50AN and XC3S50A devices solely because both use a 144-pin package. The Spartan-3AN device includes on-chip nonvolatile configuration flash, while the Spartan-3A configuration differs. Also verify the C and I temperature-class suffixes, the speed grade, and the exact package suffix before purchasing. A physically matching footprint does not by itself establish configuration, software-tool, or temperature compatibility.
معلومات الامتثال
RoHS compliance is identified by the component comparison record. Automotive qualification, halogen-free status, conflict-minerals reporting, and REACH status require confirmation through the current AMD product documentation.