XC3S50AN-4TQG144I - 50K Spartan-3AN FPGA | AMD
MPN: XC3S50AN-4TQG144I ✓ ActiveXC3S50AN-4TQG144I Overview
An FPGA is a programmable digital semiconductor whose logic, interconnect, memory, and I/O resources can be configured after manufacture. It belongs to the FPGA hierarchy, where programmable logic provides an alternative to fixed-function logic ICs, gate arrays, and application-specific controllers. The Spartan-3AN family combines configurable logic with non-volatile configuration flash and user data storage, allowing designs to retain their programmed configuration without a separate configuration PROM.
Principal resources include 176 logic array blocks organized into 1,584 configurable logic blocks, 55,296 RAM bits, and 108 user I/O pins. The listed 667 MHz device figure represents a maximum internal timing benchmark rather than a guarantee of every routed interface frequency. The -4 speed designation identifies the performance grade, while the I suffix denotes the industrial-temperature option. Pb-free package construction is indicated by the G character in the ordering code.
The device supports parallel and serial configuration paths, including SelectMAP, SPI, and platform flash programming methods described for the Spartan-3AN family. Configuration data can also be loaded through supported serial modes, which is useful when board space is constrained. Because the Spartan-3AN architecture includes non-volatile flash, designs can preserve configuration and non-volatile data between power cycles without relying exclusively on an external configuration memory device.
Typical uses include industrial control, communications equipment, instrumentation, embedded display systems, and compact data-acquisition products. Its 108 user I/O pins suit designs requiring numerous parallel digital connections, while the 50,000-gate-class logic capacity is appropriate for moderate control logic, protocol interfaces, and modest parallel processing pipelines. A larger FPGA is generally unnecessary when the design fits within 1,584 logic cells and the available I/O budget.
PCB design should follow the AMD DS557 pinout and package recommendations, including decoupling, configuration-interface routing, and unused-pin treatment. The 144-pin TQFP footprint is easy to inspect after assembly, but its fine lead pitch makes careful footprint inspection, solder-paste control, and thermal-cone design important. Validate the assembled board before programming a production configuration.
This page combines device resources, verified package and ordering details, configuration guidance, and drop-in comparison options to support faster engineering selection. It also highlights where temperature grade, suffix, configuration method, and package construction affect replacement decisions.
Drop-in alternatives for XC3S50AN-4TQG144I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC3S50AN-4TQG144I (same form factor and footprint) — differing in Package, Device Type, Operating Temperature, System Gates, Process Technology.
XC3S50AN-4TQ144I
✅ Drop-InContact for price
View Datasheet →XC3S50AN-4TQ144C
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC3S50AN-4TQG144C
✅ Drop-InContact for price
View Datasheet →XC3S50AN-4TQ144I
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC3S50AN-4TQG144
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
XC3S50AN-4TQG144I Maximum Ratings & Electrical Characteristics
| Device Type | Spartan-3AN Field Programmable Gate Array (FPGA) |
| Configured Logic Elements | 1,584 |
| Logic Array Blocks | 176 |
| System Gates | 50,000 |
| Total RAM | 55,296 bits |
| User I/O Pins | 108 |
| Maximum Device Timing Frequency | 667 MHz |
| Supply Voltage | 3.3 V |
| Operating Temperature | -40°C to +100°C junction temperature |
| Package | 144-lead TQFP |
| Process Technology | CMOS |
| Configuration Memory | Non-volatile configuration flash |
| Supported Configuration Modes | SelectMAP, SPI, platform flash, and serial configuration modes |
| Mounting Type | Surface mount |
| Pb-Free Construction | Yes, G suffix |
XC3S50AN-4TQG144I 144-lead tqfp Pin Configuration Guide
Pin configuration for XC3S50AN-4TQG144I (144-lead tqfp package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC3S50AN-4TQG144I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC3S50AN-4TQG144I is suitable for 6 applications: Industrial Control and Automation, Communications Interface Equipment, Data Acquisition and Instrumentation, Embedded Display and User Interface Control, Embedded Security and Access Control, Portable and Battery-Powered Equipment.
Industrial Control and Automation
The XC3S50AN-4TQG144I suits compact industrial controllers that combine sequential logic, status monitoring, and multiple digital I/O. Its 1,584 configurable logic blocks can implement state machines, interlocks, counters, and communication control logic, while 108 user I/O pins provide substantial parallel connectivity. The industrial I suffix supports operation from -40°C to +100°C junction temperature under the stated device limits. Design the controller around the exact AMD DS557 bank-power assignments and keep external protection ahead of any connector or field-wired signal. This device is appropriate when the control algorithm fits within 55,296 RAM bits and the application does not require the parallelism of a larger FPGA.
Recommended
Communications Interface Equipment
The XC3S50AN-4TQG144I can implement modest protocol bridges, framing logic, buffers, and supervisory functions for communications equipment. Its 1,584 configurable logic blocks are suitable for parallel-to-serial conversion, command decoding, and stateful interface controllers, and the 55,296 RAM bits support packet buffering or line queues. The 667 MHz listed timing benchmark provides ample implementation headroom for many control paths, although final interface rates depend on routing and timing closure. Designers should use supported configuration methods such as SPI or SelectMAP and verify all high-speed pins against the TQFP-144 pinout and I/O-bank constraints in AMD DS557.
Recommended
Data Acquisition and Instrumentation
The XC3S50AN-4TQG144I is appropriate for instrumentation that coordinates sensors, converters, displays, and a host processor. Its 108 user I/O pins allow parallel data collection from multiple channels, while the programmable logic can perform filtering, scaling, thresholding, and timestamp-related control. The FPGA's non-volatile configuration capability supports designs that must retain setup information between power cycles. System designers should budget decoupling around every applicable supply pin, validate signal standards against the supported I/O banks, and use the 55,296 RAM bits for bounded acquisition buffers rather than assuming they can support an unrestricted high-rate capture system.
Recommended
Embedded Display and User Interface Control
The XC3S50AN-4TQG144I can drive display panels and controls through programmable timing, menu, and input-handling logic. With 108 user I/O pins, it can support parallel LCD data, key matrices, indicators, and communication to a higher-level processor. Its 1,584 configurable logic blocks allow the display timing engine, refresh handling, and interface multiplexing to coexist within one compact device. The 144-lead TQFP package provides a practical route for inspection after assembly, but display voltage levels and signal currents must be handled outside the FPGA unless they are explicitly supported. Timing should be constrained and verified against the target panel interface.
Recommended
Embedded Security and Access Control
The XC3S50AN-4TQG144I is suitable for modest access-control systems that combine credential inputs, alarm outputs, event logging, and communications. Programmable logic can implement credential protocols, lockout timers, tamper-response sequences, and message formatting, while the 108 user I/O pins simplify peripheral connection. The device's non-volatile configuration flash supports persistent implementation of the logic design, although sensitive application data should follow a separate protection strategy. A production design must review the AMD configuration-security capabilities, restrict configuration interfaces appropriately, and avoid treating ordinary FPGA configuration mechanisms as a substitute for a dedicated cryptographic security element.
Recommended
Portable and Battery-Powered Equipment
The XC3S50AN-4TQG144I can serve as a configurable control hub in portable test equipment, handheld analyzers, and compact battery-powered products where deterministic I/O behavior is required. Its non-volatile configuration flash allows rapid startup without loading the complete design through an external memory each time. The 3.3 V supply and 108 user I/O pins support integration with sensors, display controllers, and low-power communications, although actual battery life depends on the implemented logic and I/O activity. Designers should use low-power states where possible, disable unused banks according to the device guidance, and validate startup current as well as steady-state consumption in the final board configuration.
Recommended
Recommended Products Summary
Engineering reference data for XC3S50AN-4TQG144I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC3S50AN-4TQ144I | XC3S50AN-4TQ144C | XC3S50AN-4TQG144C | XC3S50AN-4TQ144 | XC3S50AN-4TQG144 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | TQFP-144 | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same |
| FPGA Family | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN | Spartan-3AN |
| Speed Grade | -4 | -4 | -4 | -4 | -4 | -4 |
| Pb-Free G Designation | Yes | No G designation | No G designation | Yes | No G designation | Yes |
Key Differentiators
- Combines industrial temperature grading with the Pb-free G designation (vs XC3S50AN-4TQ144I)
- Industrial option supports a wider junction-temperature range (vs XC3S50AN-4TQG144C)
- Preserves the same logic, memory, and I/O resources during replacement (vs XC3S50AN-4TQ144)
Design Notes
Follow the TQFP-144 land pattern and pin numbering in AMD DS557 exactly, and route configuration pins away from high-current switching nodes. Place the required power-decoupling capacitors close to their associated VCC and GND pins, with short ground-return paths. Inspect the assembled lead alignment and solder joints under magnification because an open or bridged fine-pitch lead can prevent configuration even when all external circuitry is correct.
Evaluate the 3.3 V rail against simultaneous internal switching and up to 108 user I/O loads. Use separate paths for FPGA supply distribution and sensitive external analog or reference circuitry, and keep switching-node currents away from configuration and I/O return paths. Actual consumption depends on the implemented design, clocking, I/O standards, and activity, so measure the final programmed board across normal operating modes rather than relying only on a nominal device figure.
Do not assume that every XC3S50AN-4TQFP144 ordering code is electrically interchangeable. The G suffix identifies Pb-free construction, while I and C identify different temperature grades. Before substitution, compare the complete AMD ordering table, TQFP-144 pinout, bank-supply requirements, configuration source, and operating-temperature limits. A mechanically similar package is insufficient if the original design depends on industrial-temperature operation or a Pb-free manufacturing process.
Compliance Information
The G ordering suffix indicates Pb-free construction. Exact RoHS, REACH, halogen-free, and conflict-minerals status for the target ordering code requires confirmation from the manufacturer or its formal compliance documentation.