XC4VFX12-10FFG668I - 12,312-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX12-10FFG668I ✗ انتهى عمره الإنتاجيXC4VFX12-10FFG668I نظرة عامة
An FPGA is a semiconductor whose digital circuit is defined by a bitstream loaded into configurable logic and memory fabric. Within the broader hierarchy of programmable-logic devices, an FPGA sits above simple programmable arrays and mask-programmed devices because its interconnect, logic blocks, memory, and dedicated processors can be reprogrammed for many different functions. The Virtex-4 FX platform extends that architecture with DSP and networking-oriented resources for demanding embedded, communications, and signal-processing systems.
Key device characteristics include 10,544 listed logic cells, 12,312 total cells, 320 I/O, 668 package pins, 90 nm CMOS construction, and an operating-temperature range of 0 °C to 85 °C for the commercial-grade listing. The device is marked Pb-free and is listed as RoHS compliant, which supports regulated production and end-of-life equipment procurement where environmental conformance is required.
The -10 designation identifies the speed grade rather than a change to the physical package or core architecture. Within the same 668-pin family, -11 and -12 devices provide higher speed options, while the C suffix identifies commercial temperature variants. Because these options change timing or temperature classes rather than the board footprint, they support controlled migration when a design requires additional timing margin or a broader temperature specification.
Typical uses include telecommunications and network equipment, industrial control, test and measurement, video and image processing, defense-oriented communications, and embedded systems requiring parallel logic, block RAM, DSP, and serial transceiver resources. An FPGA implementation can consolidate multiple fixed-function devices into one programmable platform while retaining field-updatable behavior.
The principal design constraint is power and thermal planning around the 1.2 V core supply. Board designers should follow the AMD power, decoupling, and pinout guidance for this package and preserve adequate copper and via connectivity around the device. Because the 668-pin FCBGA has a dense escape-routing requirement, layer count, via-in-pad practice, and assembly capability should be confirmed before layout begins.
This page combines the device specifications, package details, lifecycle information, qualified same-package migration options, and application guidance engineers need when evaluating the XC4VFX12-10FFG668I for an existing Virtex-4 design.
بدائل مباشرة لـ XC4VFX12-10FFG668I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC4VFX12-10FFG668I (نفس عامل الشكل والبصمة) — يختلف في Device Type, Operating Temperature, Logic Family, Speed Grade, User I/O.
XC4VFX12-10FF668I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC4VFX12-10FFG668C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC4VFX12-11FFG668C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC4VFX12-12FFG668C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC4VFX12-10FFG668C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC4VFX12-10FFG668I الحدود القصوى والخصائص الكهربائية
| Device Family | Virtex-4 FX |
| Product Type | Field-Programmable Gate Array (FPGA) |
| Total Logic Cells | 12,312 cells |
| Logic Cells / Logic Blocks | 10,544 |
| User I/O | 320 I/O |
| Package Pins | 668 pins |
| Package Type | FCBGA-668 |
| Internal Frequency | 1028 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| درجة حرارة التشغيل | 0 °C to 85 °C (32 °C to 185 °F) |
| Temperature Grade | Commercial |
| Logic Family | CMOS |
| حالة RoHS | RoHS compliant |
| Lead-Free Status | Pb-free |
دليل تكوين أطراف XC4VFX12-10FFG668I fcbga-668
تكوين الأطراف لـ XC4VFX12-10FFG668I (حزمة fcbga-668). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC4VFX12-10FFG668I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC4VFX12-10FFG668I مناسب لـ 6 التطبيقs: Telecommunications Network Equipment, Industrial Control and Automation, Video and Image Processing, Test and Measurement Systems, DSP and Digital Signal Processing, Aerospace and Defense Communications.
Telecommunications Network Equipment
The XC4VFX12-10FFG668I suits telecommunications equipment that requires parallel packet processing, high-speed serial links, and configurable logic within one FPGA. Its 12,312-cell Virtex-4 FX fabric and 320 user I/O provide implementation capacity for protocol engines, framing logic, traffic management, and interface conversion. The 1028 MHz maximum internal frequency supports demanding clocked datapaths, while the -10 speed grade offers a consistent qualification target for designs that close timing with margin. Designers should verify transceiver selections, clocking architecture, and auxiliary supply requirements against the device data sheet before schematic release.
موصى به
Industrial Control and Automation
The XC4VFX12-10FFG668I is appropriate for industrial controllers that combine deterministic parallel I/O, embedded control logic, and programmable signal processing. The 320 user I/O can support digital field-bus interfaces, machine I/O, counters, and control outputs, while the programmable fabric accommodates multiple peripheral functions without relying on fixed logic. The 1.2 V core architecture requires careful rail sequencing and decoupling, and the industrial temperature suffix should be checked against the complete system qualification. Legacy availability and long-term supply commitments should be addressed before the controller is released for volume production.
موصى به
Video and Image Processing
The XC4VFX12-10FFG668I can implement parallel video pipelines, pixel processing, frame buffering, and interface timing control in a single programmable device. Its 320 user I/O provide substantial parallel bandwidth for multi-channel sensor or display interfaces, and the Virtex-4 FX DSP resources can accelerate filtering and arithmetic functions. The 1028 MHz internal performance class supports demanding pixel-clock domains, although actual video timing must be closed against the selected I/O standards. Video designs also require careful clock-region planning, constrained source-synchronous interfaces, and a layer stack-up capable of supporting the 668-pin FCBGA escape routing.
موصى به
Test and Measurement Systems
The XC4VFX12-10FFG668I is well suited to configurable test and measurement systems requiring acquisition logic, pattern generation, timing control, and analysis functions in a compact platform. The 12,312-cell fabric permits parallel channel multiplexing and sophisticated trigger sequencing, while 320 user I/O support driver and comparator interfaces. Its programmable architecture allows a single board to support multiple instrument personalities through configuration changes. Engineering teams should evaluate the -10 speed grade against required sample rates, constrain all timing-critical paths, and use the AMD package pinout files to assign power, configuration, clock, and user-I/O balls accurately.
موصى به
DSP and Digital Signal Processing
The XC4VFX12-10FFG668I supports DSP-intensive implementations such as digital filters, correlation, modulation, and fixed-point arithmetic pipelines. Dedicated Virtex-4 FX processing resources complement the general-purpose logic fabric, allowing designers to concentrate repetitive multiply-accumulate work in hardware rather than a microprocessor. The 1.2 V core and 90 nm process support clocked designs operating in the device's 1028 MHz maximum internal frequency class. DSP clocking must be constrained and verified with post-place-and-route timing analysis, while serialized data interfaces require suitable clocking resources and board-level signal-integrity control.
موصى به
Aerospace and Defense Communications
The XC4VFX12-10FFG668I can serve as the programmable core in communication and data-processing subsystems requiring configurable bitstreams, parallel I/O, and deterministic control logic. Its 320 user I/O allow integration of multiple interface standards within a controlled board design. The -10 speed grade and industrial ordering suffix should be matched to the subsystem qualification plan, including radiation, temperature, reliability, and obsolescence requirements. Because FPGA bitstreams are device-specific, migration between Virtex-4 grades requires recompilation and complete hardware validation rather than only a purchasing substitution.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC4VFX12-10FFG668I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC4VFX12-10FF668I | XC4VFX12-10FFG668C | XC4VFX12-11FFG668C | XC4VFX12-12FFG668C | XC4VFX12-10FFG668C |
|---|---|---|---|---|---|---|
| Package | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -10 | -10 | -10 | -11 | -12 | -10 |
| Logic Cells | 10,544 | 10,544 | 10,544 | 10,544 | 10,544 | 10,544 |
| Total Cells | 12,312 | 12,312 | 12,312 | 12,312 | 12,312 | 12,312 |
| User I/O | 320 | 320 | 320 | 320 | 320 | 320 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
أبرز الفروقات
- Same-footprint speed-grade migration options (مقابلXC4VFX12-12FFG668C)
- Commercial-temperature version within the same device class (مقابلXC4VFX12-10FFG668C)
- Programmable integration of logic, DSP, memory, and I/O (مقابلXC4VLX15-10FFG668I)
- Established -10 speed-grade configuration (مقابلXC4VFX12-11FFG668C)
ملاحظات التصميم
Estimate: (Estimated): Use the design's activity factor, selected I/O standards, and the AMD DC and switching characteristics to calculate average core and I/O power. Estimated junction temperature equals maximum ambient temperature plus total dissipation multiplied by the effective junction-to-ambient thermal resistance of the populated board. Because the 668-pin FCBGA concentrates heat under the device, provide uninterrupted ground-plane copper, thermal vias, and adequate airflow. Validate the thermal model at the highest expected operating temperature rather than relying only on a nominal board calculation.
The XC4VFX12-10FFG668I uses a 1.2 V core supply, so the regulator and decoupling network must support the device's configuration activity as well as steady-state logic demand. Place bulk and high-frequency decoupling capacitors at the designated power and ground balls according to the AMD reference design. Sequence auxiliary rails as specified, confirm the core rail's startup behavior, and leave test access for voltage measurement. Do not substitute capacitor values without rechecking the power-integrity simulation and loop impedance.
The 668-pin FCBGA requires an escape-routing strategy that accommodates the package's fine pitch and dense power arrangement. Follow the AMD package pinout and design-assistance files for ball assignments and escape routing. Stagger signal vias where possible, maintain continuous reference planes, control differential-pair length matching, and avoid long stubs beneath the device. PCB assembly capability should be confirmed for the selected package, and X-ray or continuity inspection can help detect hidden solder-joint defects after reflow.
A same-footprint ordering-code change is not automatically a drop-in qualification. The -10, -11, and -12 suffixes denote different speed grades, while I and C identify temperature-market distinctions. Validate the complete pinout, configuration interface, supported clocking resources, power requirements, and timing margins before migration. FPGA bitstreams are device-specific, so each approved alternative requires recompilation, static timing analysis, simulation, and hardware bring-up. Legacy supply status and traceability should also be documented before production release.
معلومات الامتثال
The device is identified as Pb-free and RoHS compliant. AEC-Q100, REACH, halogen-free, and conflict-minerals declarations are not stated for this exact ordering code.