XC4VFX12-10FFG668I - 12,312-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX12-10FFG668I ✗ 停產XC4VFX12-10FFG668I 概覽
An FPGA is a semiconductor whose digital circuit is defined by a bitstream loaded into configurable logic and memory fabric. Within the broader hierarchy of programmable-logic devices, an FPGA sits above simple programmable arrays and mask-programmed devices because its interconnect, logic blocks, memory, and dedicated processors can be reprogrammed for many different functions. The Virtex-4 FX platform extends that architecture with DSP and networking-oriented resources for demanding embedded, communications, and signal-processing systems.
Key device characteristics include 10,544 listed logic cells, 12,312 total cells, 320 I/O, 668 package pins, 90 nm CMOS construction, and an operating-temperature range of 0 °C to 85 °C for the commercial-grade listing. The device is marked Pb-free and is listed as RoHS compliant, which supports regulated production and end-of-life equipment procurement where environmental conformance is required.
The -10 designation identifies the speed grade rather than a change to the physical package or core architecture. Within the same 668-pin family, -11 and -12 devices provide higher speed options, while the C suffix identifies commercial temperature variants. Because these options change timing or temperature classes rather than the board footprint, they support controlled migration when a design requires additional timing margin or a broader temperature specification.
Typical uses include telecommunications and network equipment, industrial control, test and measurement, video and image processing, defense-oriented communications, and embedded systems requiring parallel logic, block RAM, DSP, and serial transceiver resources. An FPGA implementation can consolidate multiple fixed-function devices into one programmable platform while retaining field-updatable behavior.
The principal design constraint is power and thermal planning around the 1.2 V core supply. Board designers should follow the AMD power, decoupling, and pinout guidance for this package and preserve adequate copper and via connectivity around the device. Because the 668-pin FCBGA has a dense escape-routing requirement, layer count, via-in-pad practice, and assembly capability should be confirmed before layout begins.
This page combines the device specifications, package details, lifecycle information, qualified same-package migration options, and application guidance engineers need when evaluating the XC4VFX12-10FFG668I for an existing Virtex-4 design.
直接替換替代品,適用於 XC4VFX12-10FFG668I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VFX12-10FFG668I (相同外形與佔位) — 差異在於 Device Type, Operating Temperature, Logic Family, Speed Grade, User I/O.
XC4VFX12-10FF668I
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX12-10FFG668C
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX12-11FFG668C
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX12-12FFG668C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX12-10FFG668C
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX12-10FFG668I 最大額定值與電氣特性
| Device Family | Virtex-4 FX |
| Product Type | Field-Programmable Gate Array (FPGA) |
| Total Logic Cells | 12,312 cells |
| Logic Cells / Logic Blocks | 10,544 |
| User I/O | 320 I/O |
| Package Pins | 668 pins |
| Package Type | FCBGA-668 |
| Internal Frequency | 1028 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -10 |
| 工作溫度 | 0 °C to 85 °C (32 °C to 185 °F) |
| Temperature Grade | Commercial |
| Logic Family | CMOS |
| RoHS 狀態 | RoHS compliant |
| Lead-Free Status | Pb-free |
XC4VFX12-10FFG668I fcbga-668 腳位配置指南
XC4VFX12-10FFG668I(fcbga-668 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VFX12-10FFG668I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VFX12-10FFG668I 適用於 6 應用s: Telecommunications Network Equipment, Industrial Control and Automation, Video and Image Processing, Test and Measurement Systems, DSP and Digital Signal Processing, Aerospace and Defense Communications.
Telecommunications Network Equipment
The XC4VFX12-10FFG668I suits telecommunications equipment that requires parallel packet processing, high-speed serial links, and configurable logic within one FPGA. Its 12,312-cell Virtex-4 FX fabric and 320 user I/O provide implementation capacity for protocol engines, framing logic, traffic management, and interface conversion. The 1028 MHz maximum internal frequency supports demanding clocked datapaths, while the -10 speed grade offers a consistent qualification target for designs that close timing with margin. Designers should verify transceiver selections, clocking architecture, and auxiliary supply requirements against the device data sheet before schematic release.
推薦
Industrial Control and Automation
The XC4VFX12-10FFG668I is appropriate for industrial controllers that combine deterministic parallel I/O, embedded control logic, and programmable signal processing. The 320 user I/O can support digital field-bus interfaces, machine I/O, counters, and control outputs, while the programmable fabric accommodates multiple peripheral functions without relying on fixed logic. The 1.2 V core architecture requires careful rail sequencing and decoupling, and the industrial temperature suffix should be checked against the complete system qualification. Legacy availability and long-term supply commitments should be addressed before the controller is released for volume production.
推薦
Video and Image Processing
The XC4VFX12-10FFG668I can implement parallel video pipelines, pixel processing, frame buffering, and interface timing control in a single programmable device. Its 320 user I/O provide substantial parallel bandwidth for multi-channel sensor or display interfaces, and the Virtex-4 FX DSP resources can accelerate filtering and arithmetic functions. The 1028 MHz internal performance class supports demanding pixel-clock domains, although actual video timing must be closed against the selected I/O standards. Video designs also require careful clock-region planning, constrained source-synchronous interfaces, and a layer stack-up capable of supporting the 668-pin FCBGA escape routing.
推薦
Test and Measurement Systems
The XC4VFX12-10FFG668I is well suited to configurable test and measurement systems requiring acquisition logic, pattern generation, timing control, and analysis functions in a compact platform. The 12,312-cell fabric permits parallel channel multiplexing and sophisticated trigger sequencing, while 320 user I/O support driver and comparator interfaces. Its programmable architecture allows a single board to support multiple instrument personalities through configuration changes. Engineering teams should evaluate the -10 speed grade against required sample rates, constrain all timing-critical paths, and use the AMD package pinout files to assign power, configuration, clock, and user-I/O balls accurately.
推薦
DSP and Digital Signal Processing
The XC4VFX12-10FFG668I supports DSP-intensive implementations such as digital filters, correlation, modulation, and fixed-point arithmetic pipelines. Dedicated Virtex-4 FX processing resources complement the general-purpose logic fabric, allowing designers to concentrate repetitive multiply-accumulate work in hardware rather than a microprocessor. The 1.2 V core and 90 nm process support clocked designs operating in the device's 1028 MHz maximum internal frequency class. DSP clocking must be constrained and verified with post-place-and-route timing analysis, while serialized data interfaces require suitable clocking resources and board-level signal-integrity control.
推薦
Aerospace and Defense Communications
The XC4VFX12-10FFG668I can serve as the programmable core in communication and data-processing subsystems requiring configurable bitstreams, parallel I/O, and deterministic control logic. Its 320 user I/O allow integration of multiple interface standards within a controlled board design. The -10 speed grade and industrial ordering suffix should be matched to the subsystem qualification plan, including radiation, temperature, reliability, and obsolescence requirements. Because FPGA bitstreams are device-specific, migration between Virtex-4 grades requires recompilation and complete hardware validation rather than only a purchasing substitution.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VFX12-10FFG668I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VFX12-10FF668I | XC4VFX12-10FFG668C | XC4VFX12-11FFG668C | XC4VFX12-12FFG668C | XC4VFX12-10FFG668C |
|---|---|---|---|---|---|---|
| Package | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 | FCBGA-668 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -10 | -10 | -10 | -11 | -12 | -10 |
| Logic Cells | 10,544 | 10,544 | 10,544 | 10,544 | 10,544 | 10,544 |
| Total Cells | 12,312 | 12,312 | 12,312 | 12,312 | 12,312 | 12,312 |
| User I/O | 320 | 320 | 320 | 320 | 320 | 320 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主要差異化特點
- Same-footprint speed-grade migration options (對比XC4VFX12-12FFG668C)
- Commercial-temperature version within the same device class (對比XC4VFX12-10FFG668C)
- Programmable integration of logic, DSP, memory, and I/O (對比XC4VLX15-10FFG668I)
- Established -10 speed-grade configuration (對比XC4VFX12-11FFG668C)
設計說明
Estimate: (Estimated): Use the design's activity factor, selected I/O standards, and the AMD DC and switching characteristics to calculate average core and I/O power. Estimated junction temperature equals maximum ambient temperature plus total dissipation multiplied by the effective junction-to-ambient thermal resistance of the populated board. Because the 668-pin FCBGA concentrates heat under the device, provide uninterrupted ground-plane copper, thermal vias, and adequate airflow. Validate the thermal model at the highest expected operating temperature rather than relying only on a nominal board calculation.
The XC4VFX12-10FFG668I uses a 1.2 V core supply, so the regulator and decoupling network must support the device's configuration activity as well as steady-state logic demand. Place bulk and high-frequency decoupling capacitors at the designated power and ground balls according to the AMD reference design. Sequence auxiliary rails as specified, confirm the core rail's startup behavior, and leave test access for voltage measurement. Do not substitute capacitor values without rechecking the power-integrity simulation and loop impedance.
The 668-pin FCBGA requires an escape-routing strategy that accommodates the package's fine pitch and dense power arrangement. Follow the AMD package pinout and design-assistance files for ball assignments and escape routing. Stagger signal vias where possible, maintain continuous reference planes, control differential-pair length matching, and avoid long stubs beneath the device. PCB assembly capability should be confirmed for the selected package, and X-ray or continuity inspection can help detect hidden solder-joint defects after reflow.
A same-footprint ordering-code change is not automatically a drop-in qualification. The -10, -11, and -12 suffixes denote different speed grades, while I and C identify temperature-market distinctions. Validate the complete pinout, configuration interface, supported clocking resources, power requirements, and timing margins before migration. FPGA bitstreams are device-specific, so each approved alternative requires recompilation, static timing analysis, simulation, and hardware bring-up. Legacy supply status and traceability should also be documented before production release.
合規資訊
The device is identified as Pb-free and RoHS compliant. AEC-Q100, REACH, halogen-free, and conflict-minerals declarations are not stated for this exact ordering code.