إشعار الشراء الأخير: XC4VLX25-10FFG668I يقترب من نهاية العمر الإنتاجي. آخر موعد للطلب: تواصل معنا. عرض القطع البديلة المتاحة →
AMD

XC4VLX25-10FFG668I - 24K Cell Virtex-4 LX FPGA | AMD

MPN: XC4VLX25-10FFG668I ✗ انتهى عمره الإنتاجي
1.2 V Vdss 668-pin FCBGA Package 1,028 MHz Speed
الحد الأدنى للطلب: 1 |

XC4VLX25-10FFG668I نظرة عامة

The AMD XC4VLX25-10FFG668I is a Virtex-4 LX field-programmable gate array with 24,192 logic cells, 448 I/O terminals, and a 668-pin FCBGA package. It uses 90 nm CMOS fabrication technology, operates from a 1.2 V core supply, and is offered in the -10 speed grade. The device is designed for high-performance programmable-logic systems requiring substantial parallel processing capacity, high I/O density, and deterministic FPGA-based architecture.

A field-programmable gate array is a programmable semiconductor whose logic fabric, interconnect network, and I/O blocks can be configured after manufacture. Within the FPGA hierarchy, the Virtex-4 LX family provides general-purpose programmable logic for communications, control, networking, industrial, and embedded systems. Unlike fixed-function logic, an FPGA allows design changes to be implemented through a new configuration bitstream while retaining the same physical device and board layout.

Key device characteristics include 24,192 logic cells, 2,688 configurable logic blocks, 448 I/O terminals, and a listed maximum internal frequency of 1028 MHz. Its 668-position FCBGA package concentrates a very large pin count into a compact surface-mount footprint. The -10 suffix identifies the device speed grade, while the FFG package code identifies the 668-ball package family used by this ordering code.

The Virtex-4 architecture combines programmable logic blocks with dedicated resources for high-speed serial connectivity, memory, clock management, and general-purpose I/O. Its 448 I/O resources allow the device to interface directly with parallel buses, memory devices, control signals, and external data-conversion or communication circuits. Designers can partition the available logic among datapath processing, protocol handling, state machines, and supervisory functions.

Typical uses include high-speed telecommunications equipment, network-interface controllers, industrial automation, test and measurement systems, signal processing, and embedded control platforms. The large logic capacity is particularly useful when implementing multiple parallel channels, substantial control logic, and hardware-assisted protocol processing on one programmable device. Configuration, clocking, power sequencing, and I/O standards should be established from the appropriate AMD device documentation before layout release.

PCB implementation requires careful attention to the 668-ball FCBGA escape routing, power and ground distribution, decoupling, and high-speed signal integrity. A multilayer board with solid reference planes is generally preferable for a device with this many connections. Maintain the power and ground connectivity specified by the manufacturer, route sensitive clock and serial interfaces consistently, and validate the finished design with appropriate signal-integrity and thermal simulations.

This product page combines the exact ordering-code details with practical selection guidance, same-package replacement analysis, and engineering-focused implementation notes. It is intended to help designers distinguish speed-grade and temperature-grade alternatives without confusing them with devices that require a different footprint, voltage configuration, bitstream, or board redesign.

بدائل مباشرة لـ XC4VLX25-10FFG668I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع XC4VLX25-10FFG668I (نفس عامل الشكل والبصمة) — يختلف في Operating Temperature, Device Type, Speed Grade, Package, Package Type.

AMD
Operating Temperature: -40°C to 100°C
Package: 668-ball FCBGA
Package Type: Grid-array, BGA
قارن مع XC4VLX25-10FFG668I →
AMD
Operating Temperature: 0°C to 85°C
Device Type: Virtex-4 LX Field Programmable Gate Array
Package: 668-pin FCBGA, 27 mm x 27 mm
قارن مع XC4VLX25-10FFG668I →
AMD
Speed Grade: -11
Package: 668-ball FCBGA
قارن مع XC4VLX25-10FFG668I →
AMD
Speed Grade: -11
Package: 668-ball FCBGA
Package Type: 668-BBGA / FCBGA
قارن مع XC4VLX25-10FFG668I →
AMD
Operating Temperature: 0°C to +85°C
Device Type: Virtex-4 LX Field Programmable Gate Array
Speed Grade: -11
قارن مع XC4VLX25-10FFG668I →
AMD
Operating Temperature: 0 °C to 85 °C
Device Type: Virtex-4 LX FPGA
Speed Grade: -12
قارن مع XC4VLX25-10FFG668I →

XC4VLX25-10FFG668C

✅ بديل مباشر
AMD
📦 668-pin FCBGA
Virtex-4 LX Field Programmable Gate Array · 24,192 cells · 2,688 CLBs · 1,327,104 bits · 448 I/O · 1,028 MHz · 90 nm CMOS · -10

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC4VLX25-10FFG668CS2

✅ بديل مباشر
📦 668-pin FCBGA
Same XC4VLX25 architecture, 24,192 cells, -10 speed grade, and 668-pin package; S2 suffix identifies a distinct ordering option.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC4VLX25-11FFG668I

✅ بديل مباشر
AMD
📦 668-pin FCBGA
Virtex-4 LX Field Programmable Gate Array · 24,192 logic cells · 2,688 CLBs · 1,327,104 gates · 448 I/O · -11 · CMOS · 1,028 MHz

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC4VLX25-11FFG668C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
AMD
📦 668-pin FCBGA
Virtex-4 LX Field-Programmable Gate Array · 24,192 cells · 2,688 CLBs · 1,205 MHz · 448 I/O · CMOS · -11 · 668-ball FCBGA

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC4VLX25-12FFG668I

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 668-pin FCBGA
Same XC4VLX25 architecture and 668-pin FFG package; -12 speed grade is faster than the target -10 grade.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC4VLX25-12FFG668C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
AMD
📦 668-pin FCBGA
Virtex-4 LX FPGA · 24,192 cells · 2,688 CLBs · 448 I/O · 1.3 Mb · 90 nm CMOS · 1.2 V nominal · 1.14 V to 1.26 V

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC4VLX25-10FFG668I الحدود القصوى والخصائص الكهربائية

Device Type Virtex-4 LX Field-Programmable Gate Array
Logic Cells 24,192 cells
Logic Cells / Logic Blocks 22,272 logic cells / logic blocks
Configurable Logic Blocks 2,688 CLBs
Internal Frequency 1,028 MHz
I/O Count 448 I/O
Technology 90 nm CMOS
Core Supply Voltage 1.2 V
Package Type 668-pin FCBGA
Package Pin Count 668 pins
Logic Family CMOS
Speed Grade -10
نوع التركيب Surface Mount
Programmable Logic Type FPGA
Lead-Free Status Pb-Free

دليل تكوين أطراف XC4VLX25-10FFG668I 668 pins

تكوين الأطراف لـ XC4VLX25-10FFG668I (حزمة 668 pins). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 668 pins لـ XC4VLX25-10FFG668I

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC4VLX25-10FFG668I.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

XC4VLX25-10FFG668I مناسب لـ 6 التطبيقs: High-Speed Network Interface, Industrial Automation Controller, Digital Signal Processing, Communications Equipment, Test and Measurement, Embedded Control Platform.

🌐

High-Speed Network Interface

The XC4VLX25-10FFG668I fits network-interface designs that require substantial parallel logic for packet processing, buffering, protocol handling, and traffic management. Its 24,192 logic cells provide capacity for multiple datapath stages and control blocks, while 448 I/O terminals support high-speed parallel interfaces to external memory, transceivers, and network processors. The 1,028 MHz listed internal frequency belongs to the device family and is not a guarantee that every user design will close timing at that rate; actual performance depends on logic utilization, clocking, pin placement, and speed grade. A -10 design should therefore be evaluated with production timing constraints and appropriate board-level signal-integrity analysis.

🏭

Industrial Automation Controller

The XC4VLX25-10FFG668I is suited to industrial automation controllers that combine machine control, sequence logic, diagnostics, and communication in one programmable device. Its 24,192 logic cells can support parallel motion-control calculations, sensor processing, and multiple communication protocols, while 448 I/O terminals provide connectivity to field-level interfaces. The I suffix identifies the industrial ordering option, making it more appropriate than the commercial-grade suffix when ambient-temperature requirements are elevated. Designers should still verify the complete electrical limits, clock requirements, configuration method, and safety functions in the official Virtex-4 documentation.

⚙️

Digital Signal Processing

The XC4VLX25-10FFG668I can implement parallel digital signal-processing pipelines when a design benefits from reconfigurable logic, custom arithmetic, and extensive I/O. Its 24,192 logic cells and 2,688 configurable logic blocks can host filters, FFT-related stages, interpolation logic, and control functions, while the 448 I/O terminals support concurrent sample channels and external converters. The -10 speed grade should be selected only if timing analysis confirms adequate margin for the selected pipeline architecture. Clock partitioning, resource sharing, and DSP inference decisions can materially affect both throughput and power, so implementation should be repeated with production constraints.

📡

Communications Equipment

The XC4VLX25-10FFG668I is applicable to communications equipment requiring parallel datapath logic and extensive interface connectivity. Its programmable architecture can support channelization, framing, packet segmentation, error checking, and control-plane functions, while 448 I/O terminals connect the FPGA to external memories and high-speed interface devices. The listed 1,028 MHz internal frequency provides a basis for high-rate architectural planning, but actual throughput is determined by the selected clocking scheme, routing, I/O standards, and timing closure. Systems should also verify serializer availability and board signal integrity for each specific external interface.

📺

Test and Measurement

The XC4VLX25-10FFG668I can serve as the programmable control and acquisition engine in test and measurement systems. Its 24,192 logic cells allow concurrent acquisition logic, trigger sequencing, data formatting, and instrument-control functions, while 448 I/O terminals support external converters, memory, and timing references. Programmable logic also permits measurement-specific features to be updated without changing the PCB, which is valuable in configurable laboratory platforms. Designers should allocate pins according to the applicable I/O standards, keep sensitive analog and digital grounds separated appropriately, and use the device timing tools to confirm acquisition-path performance.

🧩

Embedded Control Platform

The XC4VLX25-10FFG668I fits embedded control platforms where programmable logic is needed alongside deterministic sequencing and multiple peripheral interfaces. The 448 I/O terminals allow direct connection to sensors, actuators, memory, and communications peripherals, while 24,192 logic cells can host control loops, safety interlocks, diagnostics, and protocol engines. The industrial-grade suffix supports designs intended for an extended industrial temperature environment, subject to confirmation of the complete operating specification. Firmware and bitstream protection, configuration timing, clock distribution, and watchdog behavior should be planned before deployment in unattended or safety-relevant equipment.

Where can I buy the XC4VLX25-10FFG668I?
The XC4VLX25-10FFG668I can be requested through the Request a Quote form on this page. The exact ordering code includes the Virtex-4 LX device, -10 speed grade, 668-pin FFG package, and industrial temperature designation. Submit the required quantity, target package orientation, and inspection requirements so the quote can be matched to the correct assembled and tested device.
What is the price of the XC4VLX25-10FFG668I?
Use the Request a Quote form on this page for the current XC4VLX25-10FFG668I price and volume terms. Pricing for this legacy FPGA can vary with quantity, programmed-device status, traceability, date code, and delivery requirements. The quote form provides a consistent channel for obtaining an exact-part quotation without relying on a potentially stale catalog figure.
What is the lead time for the XC4VLX25-10FFG668I?
Request the current lead time through the Request a Quote form on this page. Lead time for the XC4VLX25-10FFG668I depends on factory inventory, allocation, inspection, and whether the device is programmed before shipment. Include the required delivery date and any traceability requirements when submitting the request so scheduling can be evaluated against the complete procurement plan.
Is the XC4VLX25-10FFG668I currently in stock?
Current XC4VLX25-10FFG668I inventory must be confirmed through the Request a Quote form on this page. The device is an older Virtex-4 LX FPGA, so availability should not be inferred from a generic family listing. Provide the required quantity, acceptable date codes, inspection level, and target delivery schedule when requesting an inventory confirmation.
What are the key specifications of the XC4VLX25-10FFG668I?
The XC4VLX25-10FFG668I provides 24,192 logic cells, 2,688 configurable logic blocks, 448 I/O terminals, and a listed internal frequency of 1,028 MHz. It is manufactured in 90 nm CMOS technology, uses a 1.2 V core supply, and is supplied in a 668-pin FCBGA package. These figures identify the core logic, interface density, technology generation, speed grade, and board-level footprint.
What is the difference between XC4VLX25-10FFG668I and XC4VLX25-10FFG668C?
The XC4VLX25-10FFG668I and XC4VLX25-10FFG668C share the Virtex-4 LX device, -10 speed grade, and 668-pin FFG package. Their principal ordering-code distinction is the final temperature-grade suffix: I designates the industrial grade, while C designates the commercial grade. AMD states that another XC4VLX25 in the same package can provide a fully compatible footprint-and-bitstream replacement when the speed or temperature grade is suitable.
When should I choose the XC4VLX25-10FFG668I over a faster speed grade?
Choose the XC4VLX25-10FFG668I when its -10 performance grade meets timing closure and the application requires the industrial temperature option. A faster -11 or -12 grade may be preferable when additional timing margin is needed, provided it remains compatible with the power, configuration, and bitstream requirements. The exact device family, package, and speed grade should be confirmed before changing the BOM.
Is the XC4VLX25-10FFG668I suitable for industrial control and automation systems?
The XC4VLX25-10FFG668I is suitable for industrial control and automation designs that require a 668-pin FPGA with 24,192 logic cells and 448 I/O terminals. Its I suffix identifies the industrial temperature option, while its substantial programmable logic supports parallel control, protocol handling, and signal processing. Final suitability should be confirmed against the complete system temperature range and AMD’s device specifications.
What can replace the XC4VLX25-10FFG668I?
The safest fully compatible replacements are other XC4VLX25 devices with the same 668-pin FFG package and a suitable speed or temperature grade. AMD specifically identifies another XC4VLX25 in the same package as the compatible replacement path. A different logic-cell count, package, voltage configuration, or incompatible bitstream should not be treated as a drop-in substitute without a complete design migration.
Can XC4VLX25-10FFG668C replace the XC4VLX25-10FFG668I?
Yes, the XC4VLX25-10FFG668C can physically replace the XC4VLX25-10FFG668I because both use the same 668-pin FFG package and -10 speed grade, subject to commercial-versus-industrial temperature requirements. AMD identifies same-package XC4VLX25 options as fully compatible in footprint and bitstream. Verify the temperature range and obtain a new or confirmed bitstream before production use.
What is the best AMD equivalent for the XC4VLX25-10FFG668I?
The closest AMD drop-in choices are other XC4VLX25 devices in the 668-pin FFG package, including the -10 commercial, -11, and -12 ordering options. They preserve the same device family, logic architecture, package footprint, and bitstream compatibility path, while changing the speed or temperature grade. No cross-manufacturer equivalent is identified as a verified drop-in replacement.
Is the XC4VLX25-10FFG668I the same as the XC4VLX25-11FFG668I?
The XC4VLX25-10FFG668I and XC4VLX25-11FFG668I use the same Virtex-4 LX device and 668-pin FFG package, but they belong to different speed grades. The -11 option provides a faster speed grade than the -10 target. AMD identifies same-package speed-grade alternatives as compatible, but timing, power, configuration, and bitstream requirements must still be checked for the target design.
Where can I download the XC4VLX25-10FFG668I datasheet PDF?
The XC4VLX25-10FFG668I datasheet is available through the manufacturer-linked datasheet page on this product page and through the datasheet archive entry for XC4VLX25. Use the Virtex-4 LX device documentation to verify package pinout, DC and AC characteristics, configuration requirements, clocking, power sequencing, and supported operating conditions before releasing the PCB or production design.
Where can I find the XC4VLX25-10FFG668I pinout?
Use the pin-description table in the manufacturer device documentation for the 668-pin FCBGA assignment of the XC4VLX25-10FFG668I. The package contains 668 contacts, so the public listing confirms the package count but does not provide a complete numbered ball map in the page excerpt. PCB routing should therefore follow the official package drawing and pin table rather than a generic BGA numbering assumption.
How should power and grounding be designed for the XC4VLX25-10FFG668I?
The XC4VLX25-10FFG668I uses a 1.2 V core supply and requires a multilayer PCB with carefully distributed power and ground planes. Follow the manufacturer power-decoupling, plane-connection, and high-speed-routing guidance, placing bypass networks close to the relevant device balls. The 668-pin FCBGA also demands controlled escape routing and verification of return paths for high-speed clock and I/O signals.

بيانات مرجعية هندسية لـ XC4VLX25-10FFG668I — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the XC4VLX25-10FFG668I for an existing design built around the Virtex-4 LX -10 speed grade, industrial temperature requirement, and 668-pin FFG footprint. Use XC4VLX25-10FFG668C when the commercial temperature grade is acceptable; it preserves the core device, package, and speed grade. Select XC4VLX25-11FFG668I when a faster -11 grade is desirable but industrial temperature operation is required, and consider the -12 ordering options when additional timing margin is needed. The faster grades may change power and timing characteristics, so complete static and dynamic timing analysis rather than assuming interchangeability. AMD identifies same-package XC4VLX25 devices as the fully compatible replacement path. A different FPGA family may offer more resources, but it can require a different package, board layout, configuration method, tool flow, and bitstream, so it should be treated as a redesign rather than a drop-in replacement.

المقارنة مع البدائل

المعامل هذا المنتج XC4VLX25-10FFG668C XC4VLX25-10FFG668CS2 XC4VLX25-11FFG668I XC4VLX25-11FFG668C XC4VLX25-12FFG668I
Brand AMD AMD AMD AMD AMD AMD
Package 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA
Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Speed Grade -10 -10 -10 -11 -11 -12
Temperature Grade Industrial Commercial Commercial Industrial Commercial Industrial

أبرز الفروقات

  • Industrial-grade same-package option (مقابلXC4VLX25-10FFG668C)
  • Additional timing margin from a faster speed grade (مقابلXC4VLX25-10FFG668I)
  • Highest available same-family speed option (مقابلXC4VLX25-11FFG668I)
  • Direct configuration compatibility path (مقابلCross-manufacturer FPGA alternatives)

ملاحظات التصميم

Follow the Virtex-4 LX power-supply and decoupling guidance when assigning the 1.2 V core rail and associated I/O supplies. Place the required bypass capacitors at the specified package balls, provide adequate source current, and connect all supply and ground balls according to the official package drawing. Do not split a specified plane or remove a power ball to simplify routing; the 668-pin FCBGA expects dense, low-impedance plane connectivity for signal and power integrity.

Treat the 668-pin FCBGA as a high-density routing challenge and plan the stackup before placing the device. Use a multilayer PCB with adjacent reference planes, short BGA escape paths, and via symmetry where practical. Match rise and fall times through controlled-impedance routing, avoid long stubs, and maintain continuous return paths beneath high-speed interfaces. Complete signal-integrity simulations with the actual stackup, connector, package, and external-device models.

Assign clocks and high-speed interfaces according to the manufacturer’s clocking and I/O guidance, keeping sensitive routing away from noisy interfaces wherever the pin assignment permits. Account for package and board delay when constraining timing, and validate source-synchronous or clocked interfaces with eye-diagram and jitter analysis. A listed 1,028 MHz internal device frequency does not guarantee that an external interface at that rate will close timing without suitable clocking, constraints, and signal conditioning.

Do not treat a same-family FPGA as an automatic substitute unless the device, package, speed grade, temperature grade, voltage configuration, and bitstream compatibility all match. The -10, -11, and -12 order codes represent different speed grades, while I and C identify different temperature options. Before releasing a replacement BOM, load the intended bitstream, complete timing analysis, verify pin assignments, and confirm that the original board’s power and thermal design remain valid.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Yes
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The Mouser listing identifies the XC4VLX25-10FFG668I as Pb-Free. No definitive RoHS, REACH, halogen-free, or conflict-minerals statement was identified.

تم التحقق من البيانات في: 2026-11-18 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

xc4vlx25 10ffg668c xc4vlx25 11ffg668c XC4VLX25-10FFG668I datasheet XC4VLX25-10FFG668I datasheet pdf XC4VLX25-10FFG668I pinout XC4VLX25-10FFG668I equivalent XC4VLX25-10FFG668I replacement XC4VLX25-10FFG668I cross reference XC4VLX25-10FFG668I price XC4VLX25-10FFG668I stock AMD XC4VLX25-10FFG668I XC4VLX25-10FFG668I 24192 logic cells XC4VLX25-10FFG668I 668 FCBGA XC4VLX25-10FFG668I industrial application XC4VLX25-10FFG668I vs XC4VLX25-10FFG668C

المكونات والمصطلحات ذات الصلة

AMD Xilinx XC4VLX25-10FFG668I XC4VLX25-10FFG668C XC4VLX25-10FFG668CS2 XC4VLX25-11FFG668I XC4VLX25-11FFG668C XC4VLX25-12FFG668I XC4VLX25-12FFG668C Virtex-4 LX field-programmable gate array FPGA configurable logic block CLB logic cell FCBGA 668-pin package surface-mount package 90 nm CMOS 1.2 V core supply 448 I/O programmable logic bitstream compatibility industrial temperature grade RoHS REACH
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر