XC4VLX25-10FFG668I - 24K Cell Virtex-4 LX FPGA | AMD
부품 번호: XC4VLX25-10FFG668I ✗ 단종XC4VLX25-10FFG668I 개요
A field-programmable gate array is a programmable semiconductor whose logic fabric, interconnect network, and I/O blocks can be configured after manufacture. Within the FPGA hierarchy, the Virtex-4 LX family provides general-purpose programmable logic for communications, control, networking, industrial, and embedded systems. Unlike fixed-function logic, an FPGA allows design changes to be implemented through a new configuration bitstream while retaining the same physical device and board layout.
Key device characteristics include 24,192 logic cells, 2,688 configurable logic blocks, 448 I/O terminals, and a listed maximum internal frequency of 1028 MHz. Its 668-position FCBGA package concentrates a very large pin count into a compact surface-mount footprint. The -10 suffix identifies the device speed grade, while the FFG package code identifies the 668-ball package family used by this ordering code.
The Virtex-4 architecture combines programmable logic blocks with dedicated resources for high-speed serial connectivity, memory, clock management, and general-purpose I/O. Its 448 I/O resources allow the device to interface directly with parallel buses, memory devices, control signals, and external data-conversion or communication circuits. Designers can partition the available logic among datapath processing, protocol handling, state machines, and supervisory functions.
Typical uses include high-speed telecommunications equipment, network-interface controllers, industrial automation, test and measurement systems, signal processing, and embedded control platforms. The large logic capacity is particularly useful when implementing multiple parallel channels, substantial control logic, and hardware-assisted protocol processing on one programmable device. Configuration, clocking, power sequencing, and I/O standards should be established from the appropriate AMD device documentation before layout release.
PCB implementation requires careful attention to the 668-ball FCBGA escape routing, power and ground distribution, decoupling, and high-speed signal integrity. A multilayer board with solid reference planes is generally preferable for a device with this many connections. Maintain the power and ground connectivity specified by the manufacturer, route sensitive clock and serial interfaces consistently, and validate the finished design with appropriate signal-integrity and thermal simulations.
This product page combines the exact ordering-code details with practical selection guidance, same-package replacement analysis, and engineering-focused implementation notes. It is intended to help designers distinguish speed-grade and temperature-grade alternatives without confusing them with devices that require a different footprint, voltage configuration, bitstream, or board redesign.
드롭인 대체품: XC4VLX25-10FFG668I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XC4VLX25-10FFG668I (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, Device Type, Speed Grade, Package, Package Type.
XC4VLX25-10FFG668C
✅ 드롭인가격 문의
데이터시트 보기 →XC4VLX25-10FFG668CS2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XC4VLX25-11FFG668I
✅ 드롭인가격 문의
데이터시트 보기 →XC4VLX25-11FFG668C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC4VLX25-12FFG668I
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
XC4VLX25-12FFG668C
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →XC4VLX25-10FFG668I 최대 정격 & 전기적 특성
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 24,192 cells |
| Logic Cells / Logic Blocks | 22,272 logic cells / logic blocks |
| Configurable Logic Blocks | 2,688 CLBs |
| Internal Frequency | 1,028 MHz |
| I/O Count | 448 I/O |
| Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Package Type | 668-pin FCBGA |
| Package Pin Count | 668 pins |
| Logic Family | CMOS |
| Speed Grade | -10 |
| 실장 유형 | Surface Mount |
| Programmable Logic Type | FPGA |
| Lead-Free Status | Pb-Free |
XC4VLX25-10FFG668I 668 pins 핀 구성 가이드
XC4VLX25-10FFG668I(668 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XC4VLX25-10FFG668I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XC4VLX25-10FFG668I 적합 용도: 6 애플리케이션s: High-Speed Network Interface, Industrial Automation Controller, Digital Signal Processing, Communications Equipment, Test and Measurement, Embedded Control Platform.
High-Speed Network Interface
The XC4VLX25-10FFG668I fits network-interface designs that require substantial parallel logic for packet processing, buffering, protocol handling, and traffic management. Its 24,192 logic cells provide capacity for multiple datapath stages and control blocks, while 448 I/O terminals support high-speed parallel interfaces to external memory, transceivers, and network processors. The 1,028 MHz listed internal frequency belongs to the device family and is not a guarantee that every user design will close timing at that rate; actual performance depends on logic utilization, clocking, pin placement, and speed grade. A -10 design should therefore be evaluated with production timing constraints and appropriate board-level signal-integrity analysis.
추천
Industrial Automation Controller
The XC4VLX25-10FFG668I is suited to industrial automation controllers that combine machine control, sequence logic, diagnostics, and communication in one programmable device. Its 24,192 logic cells can support parallel motion-control calculations, sensor processing, and multiple communication protocols, while 448 I/O terminals provide connectivity to field-level interfaces. The I suffix identifies the industrial ordering option, making it more appropriate than the commercial-grade suffix when ambient-temperature requirements are elevated. Designers should still verify the complete electrical limits, clock requirements, configuration method, and safety functions in the official Virtex-4 documentation.
추천
Digital Signal Processing
The XC4VLX25-10FFG668I can implement parallel digital signal-processing pipelines when a design benefits from reconfigurable logic, custom arithmetic, and extensive I/O. Its 24,192 logic cells and 2,688 configurable logic blocks can host filters, FFT-related stages, interpolation logic, and control functions, while the 448 I/O terminals support concurrent sample channels and external converters. The -10 speed grade should be selected only if timing analysis confirms adequate margin for the selected pipeline architecture. Clock partitioning, resource sharing, and DSP inference decisions can materially affect both throughput and power, so implementation should be repeated with production constraints.
추천
Communications Equipment
The XC4VLX25-10FFG668I is applicable to communications equipment requiring parallel datapath logic and extensive interface connectivity. Its programmable architecture can support channelization, framing, packet segmentation, error checking, and control-plane functions, while 448 I/O terminals connect the FPGA to external memories and high-speed interface devices. The listed 1,028 MHz internal frequency provides a basis for high-rate architectural planning, but actual throughput is determined by the selected clocking scheme, routing, I/O standards, and timing closure. Systems should also verify serializer availability and board signal integrity for each specific external interface.
추천
Test and Measurement
The XC4VLX25-10FFG668I can serve as the programmable control and acquisition engine in test and measurement systems. Its 24,192 logic cells allow concurrent acquisition logic, trigger sequencing, data formatting, and instrument-control functions, while 448 I/O terminals support external converters, memory, and timing references. Programmable logic also permits measurement-specific features to be updated without changing the PCB, which is valuable in configurable laboratory platforms. Designers should allocate pins according to the applicable I/O standards, keep sensitive analog and digital grounds separated appropriately, and use the device timing tools to confirm acquisition-path performance.
추천
Embedded Control Platform
The XC4VLX25-10FFG668I fits embedded control platforms where programmable logic is needed alongside deterministic sequencing and multiple peripheral interfaces. The 448 I/O terminals allow direct connection to sensors, actuators, memory, and communications peripherals, while 24,192 logic cells can host control loops, safety interlocks, diagnostics, and protocol engines. The industrial-grade suffix supports designs intended for an extended industrial temperature environment, subject to confirmation of the complete operating specification. Firmware and bitstream protection, configuration timing, clock distribution, and watchdog behavior should be planned before deployment in unattended or safety-relevant equipment.
추천
추천 제품 요약
엔지니어링 참조 데이터: XC4VLX25-10FFG668I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XC4VLX25-10FFG668C | XC4VLX25-10FFG668CS2 | XC4VLX25-11FFG668I | XC4VLX25-11FFG668C | XC4VLX25-12FFG668I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA |
| Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -10 | -10 | -10 | -11 | -11 | -12 |
| Temperature Grade | Industrial | Commercial | Commercial | Industrial | Commercial | Industrial |
주요 차별점
- Industrial-grade same-package option (vs XC4VLX25-10FFG668C)
- Additional timing margin from a faster speed grade (vs XC4VLX25-10FFG668I)
- Highest available same-family speed option (vs XC4VLX25-11FFG668I)
- Direct configuration compatibility path (vs Cross-manufacturer FPGA alternatives)
설계 노트
Follow the Virtex-4 LX power-supply and decoupling guidance when assigning the 1.2 V core rail and associated I/O supplies. Place the required bypass capacitors at the specified package balls, provide adequate source current, and connect all supply and ground balls according to the official package drawing. Do not split a specified plane or remove a power ball to simplify routing; the 668-pin FCBGA expects dense, low-impedance plane connectivity for signal and power integrity.
Treat the 668-pin FCBGA as a high-density routing challenge and plan the stackup before placing the device. Use a multilayer PCB with adjacent reference planes, short BGA escape paths, and via symmetry where practical. Match rise and fall times through controlled-impedance routing, avoid long stubs, and maintain continuous return paths beneath high-speed interfaces. Complete signal-integrity simulations with the actual stackup, connector, package, and external-device models.
Assign clocks and high-speed interfaces according to the manufacturer’s clocking and I/O guidance, keeping sensitive routing away from noisy interfaces wherever the pin assignment permits. Account for package and board delay when constraining timing, and validate source-synchronous or clocked interfaces with eye-diagram and jitter analysis. A listed 1,028 MHz internal device frequency does not guarantee that an external interface at that rate will close timing without suitable clocking, constraints, and signal conditioning.
Do not treat a same-family FPGA as an automatic substitute unless the device, package, speed grade, temperature grade, voltage configuration, and bitstream compatibility all match. The -10, -11, and -12 order codes represent different speed grades, while I and C identify different temperature options. Before releasing a replacement BOM, load the intended bitstream, complete timing analysis, verify pin assignments, and confirm that the original board’s power and thermal design remain valid.
규정 준수 정보
The Mouser listing identifies the XC4VLX25-10FFG668I as Pb-Free. No definitive RoHS, REACH, halogen-free, or conflict-minerals statement was identified.