XC6SLX25-N3FTG256C - 24,051-Cell Spartan-6 FPGA | AMD
MPN: XC6SLX25-N3FTG256C ✓ نشطXC6SLX25-N3FTG256C نظرة عامة
A field-programmable gate array is a programmable digital semiconductor whose logic fabric, memory blocks, and dedicated processing resources can be configured after manufacture. Within the FPGA hierarchy, the XC6SLX25 belongs to the Spartan-6 LX family and provides a larger logic capacity than the smaller LX9 device while retaining the same 256-pin package family. This balance makes it suitable for designs requiring parallel processing and multiple peripheral interfaces without moving to a larger FPGA package.
The device provides 24,051 logic cells and 186 user I/O in the 256-pin FTG256 package. Its 45 nm CMOS construction and 1.2 V core operation place it in the mainstream low-power programmable-logic class. The N3 ordering code identifies the specific Spartan-6 LX speed and qualification configuration, while the FTG256 suffix identifies the 256-ball fine-pitch package. Package dimensions, ball assignments, and exposed thermal requirements should be taken from the AMD Spartan-6 package documentation rather than inferred from the generic BGA designation.
The architecture is intended for parallel datapath implementation, where multiple LUT-based logic and DSP operations can execute concurrently. This is more useful than a sequential processor approach when the design benefits from deterministic hardware pipelines, wide buses, or simultaneous interface conversion. Internal block RAM reduces external memory traffic in buffering and packet-processing designs, while programmable I/O can be assigned according to the selected design and speed grade.
Typical applications include industrial automation and factory control, embedded video processing, communications infrastructure, test-and-measurement equipment, and compact control subsystems. In a communications design, parallel blocks can accelerate framing or signal processing; in industrial equipment, programmable logic can coordinate sensors, motion functions, and safety-oriented monitoring. The 186 available I/O also support systems that need multiple buses, status signals, and external memory interfaces.
PCB planning should focus on the FTG256 land pattern, ball map, power rails, decoupling, and thermal design. Place input and output return paths close to the relevant balls, provide high-frequency decoupling at the supply pins, and follow the package-specific ball-assignment files when assigning constraints. Before release, verify that the selected bitstream is compatible with the exact device speed code and package identifier.
This product page combines the exact Spartan-6 device identity, package information, pin-compatible family choices, comparison parameters, and practical PCB and design guidance. It is intended to help engineers confirm footprint compatibility, evaluate logic capacity, and plan an FPGA implementation without relying on a bare catalog listing.
بدائل مباشرة لـ XC6SLX25-N3FTG256C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC6SLX25-N3FTG256C (نفس عامل الشكل والبصمة) — يختلف في Package, Adaptive Logic Modules, Device Type, Logic Cells, Speed Grade.
XC6SLX25-2FTG256C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC6SLX25-3FTG256C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC6SLX25-2FTG256I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←XC6SLX25-3FTG256I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←XC6SLX25-N2FTG256C
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها📋 بديل مرجعي (غير موجود في الكتالوج)
XC6SLX25-N3FTG256C الحدود القصوى والخصائص الكهربائية
| FPGA Family | Spartan-6 LX |
| Logic Cells | 24,051 cells |
| Process Technology | 45 nm CMOS |
| Core Supply Voltage | 1.2 V |
| User I/O Count | 186 I/O |
| Package Type | 256-pin FTG256 BGA |
| Package Ball Count | 256 balls |
| Package Pitch | 1.0 mm |
| Device Type | Field-programmable gate array (FPGA) |
| Logic Resource Type | Programmable LUT-based logic |
دليل تكوين أطراف XC6SLX25-N3FTG256C 1.0 mm
تكوين الأطراف لـ XC6SLX25-N3FTG256C (حزمة 1.0 mm). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC6SLX25-N3FTG256C.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC6SLX25-N3FTG256C مناسب لـ 6 التطبيقs: Industrial Automation Controllers, Communications Signal Processing, Video and Image Processing, Test and Measurement Equipment, Embedded Control Subsystems, Network Storage and Data Processing.
Industrial Automation Controllers
The XC6SLX25-N3FTG256C fits industrial automation controllers that coordinate sensors, motors, interlocks, and communications while requiring deterministic parallel logic. Its 24,051 logic cells provide substantially more implementation capacity than the XC6SLX9, and 186 user I/O can accommodate machine-control signals and peripheral buses. A typical design would implement acquisition logic, motion sequencing, and protocol conversion in parallel rather than relying on sequential instruction execution. The 45 nm CMOS device operates from a 1.2 V core, so the board must use the voltage rails and decoupling arrangement defined by AMD for the FTG256 package.
موصى به
Communications Signal Processing
The XC6SLX25-N3FTG256C is suitable for communications datapaths that require simultaneous filtering, framing, packet handling, and interface conversion. Parallel logic allows multiple channels or pipeline stages to operate concurrently, while the device's 24,051 logic cells provide more design headroom than smaller Spartan-6 LX members. The 186 available user I/O can support parallel data buses, control signals, and clock distribution. Designers should use the AMD FTG256 ball assignment to route high-speed interfaces and must confirm the exact achievable clock and I/O performance for the selected speed and temperature grade.
موصى به
Video and Image Processing
The XC6SLX25-N3FTG256C can implement parallel video timing, pixel alignment, color conversion, and data-routing functions in a compact 256-ball package. Its 24,051 logic cells give the design more parallel capacity than the XC6SLX9 while retaining 186 user I/O for sensor inputs, display interfaces, and control signals. The key engineering benefit is hardware concurrency: multiple pixels or data lanes can be processed simultaneously without sharing a single processor execution path. Video timing closure still depends on the selected speed code, external memory interface, and board-level signal integrity.
موصى به
Test and Measurement Equipment
The XC6SLX25-N3FTG256C fits test-and-measurement instruments requiring flexible timing, acquisition control, pattern generation, and data formatting. Programmable logic can execute multiple independent channels concurrently, while the 24,051-cell resource level supports moderate control logic and wider datapaths. The 186 user I/O provide connections for stimulus, capture, synchronization, and instrument management. Because measurement accuracy can depend on clock quality and routing, the design should use supported clock resources and follow AMD's package and pin guidance for the FTG256 footprint.
موصى به
Embedded Control Subsystems
The XC6SLX25-N3FTG256C is appropriate for embedded control subsystems where deterministic hardware sequencing, peripheral bridging, and compact logic density are important. The 24,051 logic cells allow designers to implement multiple dedicated control blocks rather than concentrating all activity in a sequential processor. Its 186 user I/O support external memories, status inputs, actuators, and communications links within a 256-pin package. The 1.2 V core supply and 45 nm CMOS implementation require a board power design that follows the manufacturer's decoupling and grounding recommendations.
موصى به
Network Storage and Data Processing
The XC6SLX25-N3FTG256C can serve as a datapath accelerator beside a host processor in network storage or edge-processing systems. Its programmable fabric can perform protocol framing, compression, encryption control, or packet classification in parallel, reducing pressure on a sequential processor. The 24,051 logic cells provide more implementation capacity than smaller LX9 and LX16 options, and the 186 user I/O permit direct connections to memory and network interfaces. Designers should evaluate internal RAM, DSP, maximum clock, and I/O limits for the complete workload before choosing this device.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC6SLX25-N3FTG256C — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC6SLX25-2FTG256C | XC6SLX25-3FTG256C | XC6SLX25-2FTG256I | XC6SLX25-3FTG256I | XC6SLX25-N2FTG256C |
|---|---|---|---|---|---|---|
| Package | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA | 256-pin FTG256 BGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX |
| Logic Cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells | 24,051 cells |
| User I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O |
| Process Technology | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS | 45 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Code | N3 | -2 | -3 | -2 | -3 | N2 |
| Temperature Ordering Code | C | C | C | I | I | C |
أبرز الفروقات
- Higher logic capacity within the Spartan-6 LX family (مقابلXC6SLX9-N3FTG256C)
- More user I/O than the smaller LX9 in the same package class (مقابلXC6SLX9-N3FTG256C)
- N3 ordering configuration within a 24,051-cell device (مقابلXC6SLX25-2FTG256C)
ملاحظات التصميم
Use the AMD FTG256 package file as the controlling source for ball assignments and PCB constraints. The 1.0 mm pitch requires a fabrication and assembly process capable of the specified geometry. Keep power and ground distribution independent where practical, avoid splits beneath active routing regions, and assign board constraints from the exact XC6SLX25-N3FTG256C device file rather than from another Spartan-6 density.
Design the 1.2 V core rail and associated I/O supplies from the AMD power-requirement and decoupling guidance for this package. Place the required high-frequency capacitors adjacent to their assigned supply balls, minimize supply-loop area, and include adequate bulk capacitance near the FPGA. Check every ball-to-rail connection because the generic FTG256 family footprint may contain no-connect positions for some devices.
Route clocks, high-speed I/O, and configuration signals with controlled impedance and continuous return paths. Use the package-specific pin assignments to identify dedicated clock and configuration resources, and avoid unnecessary layer transitions on sensitive routes. Differential and high-speed pairs should follow the PCB stack-up and escape-routing recommendations published for the Spartan-6 FTG256 package.
A matching 256-pin package does not make every Spartan-6 LX ordering code interchangeable. Confirm the device identifier, speed code, temperature code, supported I/O standards, configuration method, and complete bitstream target before substitution. After changing from the N3 device to an -2, -3, N2, or I-coded variant, rerun timing analysis and verify the power and thermal operating conditions.
معلومات الامتثال
The C suffix identifies the catalog ordering variant, but it is not used here as evidence of RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. The N3 and N2 codes are product ordering identifiers rather than automotive qualification statements.