XC7K410T-2FFG676I - 406,720-Cell Kintex-7 FPGA | AMD
MPN: XC7K410T-2FFG676I ✓ نشطXC7K410T-2FFG676I نظرة عامة
A Kintex-7 FPGA is a semiconductor in the programmable-logic hierarchy. An FPGA uses configurable logic blocks, programmable interconnects, and dedicated memory or DSP resources to implement digital systems that can be revised after manufacture. The XC7K410T family occupies the upper portion of the Kintex-7 range, making it suitable for designs that require substantial parallel processing, multiple interfaces, or high-speed serial connectivity without moving to a larger FPGA architecture.
Key resources include 406,720 logic cells, 28,620 Kb of block RAM, and 400 user I/O for the cited FFG676 device configuration. The -2 speed grade provides a performance class above the -1 grade while remaining below the highest-performance -3 grade. The 676-ball FCBGA package supports dense routing between the FPGA fabric and package pins, although its ball pitch and thermal requirements make careful PCB design essential.
The 28 nm Kintex-7 architecture combines programmable logic with DSP48 slices, block RAM, clock-management resources, memory controllers, and serial transceivers. These dedicated resources reduce the amount of ordinary logic required for filtering, packet handling, waveform generation, data movement, and high-speed serial links. The manufacturer identifies the Kintex-7 family as a high-efficiency FPGA platform with applications spanning communication infrastructure, industrial control, scientific instrumentation, and embedded processing.
Typical uses include telecommunications line cards, industrial automation controllers, high-speed data acquisition, radar and signal-processing front ends, network appliances, and test-and-measurement systems. A design can combine parallel acquisition logic, DSP filtering, packet buffering, and serial transceivers in one device, reducing inter-chip communication and simplifying synchronization across multiple signal paths.
The principal design trade-off is the complexity of a 676-ball BGA FPGA. The board must provide dense escape routing, controlled impedance, appropriate power and ground planes, and a thermal solution capable of handling device dissipation. Designers should also verify speed-grade timing, pin assignments, transceiver configuration, memory interface requirements, and supported tool versions before releasing the schematic and layout.
This page consolidates the available device identity, package, resource, and sourcing information while adding practical comparison, selection, and design guidance. It is intended to help engineers identify the correct Kintex-7 package and speed grade before beginning schematic capture, PCB layout, or FPGA implementation.
بدائل مباشرة لـ XC7K410T-2FFG676I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC7K410T-2FFG676I (نفس عامل الشكل والبصمة) — يختلف في Package, Device Type, Core Voltage, Temperature Grade, Logic Cells.
XC7K410T-2FBG676I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7K410T-2FFG676C
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7K410T-1FBG676I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC7K410T-1FFG676I
✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منهاتواصل لمعرفة السعر
عرض ورقة البيانات ←GX1P170
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC7K410T-2FFG676I الحدود القصوى والخصائص الكهربائية
| Device Type | Kintex-7 FPGA |
| Logic Cells | 406,720 cells |
| Block RAM | 28,620 Kb |
| User I/O | 400 I/O |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | -2 |
| Temperature Grade | Industrial |
| العلبة | 676-ball FCBGA |
| Package Designation | FFG676 |
| نوع التركيب | Surface mount |
| Programmable Logic | Configurable logic blocks and programmable interconnects |
| DSP Resources | Dedicated DSP blocks |
| Memory Resources | 28,620 Kb block RAM |
| Clock Management | Integrated clock-management resources |
| High-Speed Serial I/O | Integrated high-speed transceivers |
دليل تكوين أطراف XC7K410T-2FFG676I ffg676
تكوين الأطراف لـ XC7K410T-2FFG676I (حزمة ffg676). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC7K410T-2FFG676I.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC7K410T-2FFG676I مناسب لـ 6 التطبيقs: Telecommunications Line Cards, Industrial Automation and Control, High-Speed Data Acquisition, Radar and Signal-Processing Front Ends, Network and Storage Infrastructure, Test and Measurement Instruments.
Telecommunications Line Cards
The XC7K410T-2FFG676I fits telecommunications line cards that combine packet buffering, parallel data processing, and high-speed backplane interfaces in one FPGA. Its 406,720 logic cells provide substantial implementation capacity, while 28,620 Kb of block RAM can support packet queues, lookup structures, and channel buffering. The -2 speed grade supports designs needing greater timing margin than the -1 grade. Integrated transceivers can reduce external line-driver count when their protocol, reach, and supply requirements match the design. Board designers should use the exact FFG676 ball map, verify high-speed lane assignments, and implement power and thermal planes appropriate for a 676-ball device.
موصى به
Industrial Automation and Control
The XC7K410T-2FFG676I is appropriate for industrial automation controllers that must coordinate sensors, motion systems, safety logic, communications, and real-time processing. The 406,720 logic cells allow parallel control functions and protocol engines to coexist, while the integrated DSP blocks can accelerate filtering and feedback calculations. The industrial temperature suffix I supports designs intended for extended industrial environments when the exact operating-temperature limits are met. Because the FFG676 package has 676 balls, engineers need controlled-impedance routing, multiple power planes, and careful decoupling. FPGA pin assignments for isolated inputs, high-speed outputs, clocks, and serial transceivers must be reviewed against the complete package documentation.
موصى به
High-Speed Data Acquisition
The XC7K410T-2FFG676I supports high-speed data-acquisition systems requiring simultaneous sampling, digital filtering, buffering, and data transfer. Its 406,720 logic cells can host parallel capture pipelines and trigger logic, while 28,620 Kb of block RAM provides local storage for sample batches and timing-alignment functions. Dedicated DSP resources improve the efficiency of FIR, CIC, and decimation operations compared with implementing every operation in general-purpose logic. The -2 grade can provide additional timing margin on demanding interfaces, but timing closure still depends on clocking, I/O standards, and board skew. Engineers should keep high-speed traces short, provide continuous reference planes, and validate the completed layout with signal-integrity analysis.
موصى به
Radar and Signal-Processing Front Ends
The XC7K410T-2FFG676I is suitable for radar and electronic-warfare front ends where sampled signals must be filtered, transformed, detected, and packed for downstream processing. Its 406,720 logic cells support parallel channel architectures, and the 28,620 Kb of block RAM allows buffering between acquisition, FFT-like processing, detection, and communication stages. Dedicated DSP blocks can improve throughput and resource efficiency for complex filtering and spectral transforms. The -2 speed grade supports demanding timing targets, while the 676-ball FCBGA provides the pin density needed for high-speed interfaces. Design teams should confirm converter interface rates, clock jitter requirements, transceiver capabilities, and thermal margins before committing the device to a board layout.
موصى به
Network and Storage Infrastructure
The XC7K410T-2FFG676I fits network appliances and storage controllers that combine protocol termination, packet processing, memory interfaces, and high-speed links. The large 406,720-cell fabric supports parallel packet classification, queue management, compression engines, and error checking, while 28,620 Kb of block RAM can buffer headers, descriptors, and payload fragments. Integrated serial transceivers can simplify links such as Ethernet when their supported rates, encoding, and reference-clock architecture satisfy the design. Engineers must verify memory-interface capacity, transceiver lane placement, clock topology, and timing budgets. A 676-ball package also requires a dense multilayer PCB with appropriate via structures, power distribution, and thermal management for sustained network workloads.
موصى به
Test and Measurement Instruments
The XC7K410T-2FFG676I can implement the digital portion of oscilloscopes, spectrum analyzers, synthetic instruments, and automated test equipment. Its programmable logic supports acquisition pipelines, digital filters, trigger logic, and instrument-control interfaces, while 28,620 Kb of block RAM accommodates waveform buffers and intermediate calculations. Dedicated DSP resources accelerate finite impulse response and numerical processing, and the -2 grade provides useful timing margin for fast control loops. Engineers should separate analog signal paths from the FPGA, maintain deterministic clocking, and plan memory bandwidth before fixing the architecture. The FFG676 footprint requires careful escape routing from the BGA balls, so power integrity, via symmetry, and thermal performance should be evaluated early.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC7K410T-2FFG676I — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC7K410T-2FBG676I | XC7K410T-2FFG676C | XC7K410T-1FBG676I | XC7K410T-1FFG676I | GX1P170 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | GX Semiconductor |
| Package | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA | 676-ball FCBGA migration candidate |
| Pin Compatibility | 676-ball FCBGA reference design | Candidate; verify FBG and FFG package tables | Same package designation; verify temperature limits | Candidate; speed-grade timing must be revalidated | Candidate; speed-grade timing must be revalidated | Pin-compatible migration candidate when complete ball map and power architecture match |
أبرز الفروقات
- Retains the full 406,720-cell Kintex-7 resource level (مقابلXC7K325T-1FFG900CES)
- Uses the -2 performance grade (مقابلXC7K410T-1FBG676I)
- Industrial temperature suffix for extended environments (مقابلXC7K410T-2FFG676C)
- Native 676-ball Kintex-7 package and device ecosystem (مقابلGX1P170)
ملاحظات التصميم
Treat the FFG676 footprint as a dense BGA escape-routing problem. Assign every power, ground, clock, and high-speed signal ball from the package drawing, maintain symmetric via structures beneath the device where practical, and avoid placing test points or routing discontinuities beneath sensitive balls. Validate layer transitions with the PCB fabricator's stack-up and the FPGA vendor's escape-routing guidance before sign-off.
Plan separate distribution paths for core and I/O supply groups, then connect them through the device's specified power balls and local bulk and decoupling capacitors. Place the smallest recommended ceramic capacitors directly across the relevant supply and ground balls to suppress package-transient current. Verify regulator stability, voltage tolerances, sequencing, and startup behavior against the AMD/Xilinx power-supply guidance before powering the board.
Estimate total dissipation from the core, I/O, block RAM, DSP, clocking, and transceiver loads rather than using one nominal figure. Distributed FPGA operation can make activity-dependent power materially higher than idle power. Provide copper area, thermal vias, and forced-air or conduction cooling sized for the worst operating corner, and measure junction temperature during representative workloads. Estimated: junction rise equals power dissipation multiplied by the effective package-to-ambient thermal resistance.
Use the exact speed-grade and package timing constraints when assigning clocks, transceivers, memory interfaces, and high-speed I/O. Constrain edge rates, maintain continuous reference planes, minimize stubs and layer changes, and verify channel skew and insertion loss with a physical-layer model. The -2 grade changes internal timing performance but does not correct poor board-level signal integrity.
معلومات الامتثال
No unambiguous target-device RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established from the cited target-device records.