AMD

XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD

MPN: XC7Z014S-2CLG484E ✓ نشط
484-CSPBGA Package 766 MHz Speed
الحد الأدنى للطلب: 1 |

XC7Z014S-2CLG484E نظرة عامة

The AMD Xilinx XC7Z014S-2CLG484E is a Zynq-7000 system-on-chip FPGA with 65,000 logic cells, a single-core Arm Cortex-A9 processor operating at 766 MHz, and 256 KB of on-chip RAM. The device is packaged in a 484-CSPBGA package measuring 19 mm by 19 mm. It combines programmable logic, a hard processor subsystem, CoreSight debug support, and integrated memory into one heterogeneous processing platform.

A Zynq-7000 SoC is an FPGA and SoC in the same silicon device. Its Arm Cortex-A9 processing subsystem executes operating systems, networking stacks, control software, and application code, while the Artix-7 FPGA fabric implements parallel datapaths, custom accelerators, protocol engines, and time-critical logic. This programmable-logic-plus-processor hierarchy places the device between conventional FPGAs, microcontrollers, and dedicated application-specific processors.

The XC7Z014S offers 65,000 programmable logic cells for hardware customization, along with 766 MHz Arm Cortex-A9 performance and 256 KB of on-chip RAM. The -2 speed designation identifies the device performance grade, while the E suffix identifies its temperature grade. Its 484-pin CSPBGA package exposes the processing, programmable-logic, memory, power, ground, configuration, and general-purpose I/O resources required for a high-pin-count module design.

The heterogeneous architecture allows software to control the system while programmable logic handles deterministic data acquisition, filtering, waveform generation, video processing, or interface bridging. Pin multiplexing must be planned carefully because many hard I/O functions can be assigned to programmable I/O through the design toolchain. Power sequencing, bank-specific supply requirements, decoupling, configuration boot, and high-speed memory implementation are central PCB-design considerations for this device.

Typical uses include industrial automation and factory control, industrial Ethernet equipment, camera and image-processing systems, communications infrastructure, edge-computing gateways, instrumentation, and embedded vision. The Cortex-A9 subsystem handles network protocols and control logic, while the FPGA fabric can execute parallel algorithms such as filtering, packet inspection, data acquisition, and hardware-assisted image processing without relying solely on the processor.

A robust design should follow the AMD Zynq-7000 power, decoupling, configuration, and package-layout guidance. Use the recommended regulator topology for each supply bank, preserve the specified startup sequence, and validate high-speed interfaces with controlled impedance routing. Consider processor-resource and logic-resource utilization together because software placement, memory bandwidth, and hard I/O selection can determine whether the design fits the selected XC7Z014S device.

This product record combines package, processor, logic-capacity, memory, pinout-resource, comparison, sourcing, and implementation guidance in one engineering-focused reference. It also distinguishes speed-grade and temperature-grade alternatives that use the same CLG484 footprint, helping designers evaluate replacement options without overlooking migration constraints.

بدائل مباشرة لـ XC7Z014S-2CLG484E — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع XC7Z014S-2CLG484E (نفس عامل الشكل والبصمة) — يختلف في Device Type, Package, Temperature Grade.

AMD
Device Type: Zynq-7000 SoC with Artix-7 FPGA
Package: 484-CSPBGA (19 mm x 19 mm)
Temperature Grade: I suffix
قارن مع XC7Z014S-2CLG484E →

XC7Z014S-2CLG484C

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 484-CSPBGA
Processor speed remains 766 MHz, a 0% difference, while the C temperature grade replaces the target E grade.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC7Z014S-2CLG484I

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
AMD
📦 484-CSPBGA
Zynq-7000 SoC with Artix-7 FPGA · Single ARM Cortex-A9 MPCore with CoreSight · 766 MHz · Artix-7 FPGA · 65K cells · 28 nm · 200 I/O · 484-CSPBGA (19 mm x 19 mm)

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC7Z014S-1CLG484C

✅ بديل مباشر
AMD
📦 484-CSPBGA
Zynq-7000 adaptive system-on-chip with FPGA logic · Single-core Arm Cortex-A9 MPCore · 667 MHz · CoreSight · 65K logic cells · Artix-7 · 484-CSPBGA · 19 mm x 19 mm

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC7Z014S-1CLG484I

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
AMD
📦 484-CSPBGA
Zynq-7000 heterogeneous system-on-chip · Artix-7 · 1 x ARM Cortex-A9 MPCore · 667 MHz · 65K cells · 484-CSPBGA · 19 mm x 19 mm

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC7Z014S-1CLG484E

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 484-CSPBGA
Processor speed is 667 MHz versus 766 MHz, 99 MHz or approximately 14.8% lower, while retaining the E temperature grade.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC7Z014S-2CLG484E الحدود القصوى والخصائص الكهربائية

Device Type Zynq-7000 system-on-chip FPGA
FPGA Logic Family Artix-7 FPGA fabric
Programmable Logic Cells 65,000 cells
Processor Arm Cortex-A9 MPCore
Processor Core Count 1 core
Processor Maximum Frequency 766 MHz
Debug Support CoreSight
On-Chip RAM 256 KB
العلبة 484-CSPBGA
Package Body Size 19 mm x 19 mm
Package Pin Count 484 pins
نوع التركيب Surface mount
Speed Grade -2
Temperature Grade E grade

دليل تكوين أطراف XC7Z014S-2CLG484E 484 pins

تكوين الأطراف لـ XC7Z014S-2CLG484E (حزمة 484 pins). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 484 pins لـ XC7Z014S-2CLG484E

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC7Z014S-2CLG484E.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

XC7Z014S-2CLG484E مناسب لـ 6 التطبيقs: Industrial Automation and Factory Control, Industrial Networking and Protocol Gateway, Machine Vision and Image Processing, Data Acquisition and Instrumentation, Embedded Edge Computing Gateway, Communications and Signal Processing.

🏭

Industrial Automation and Factory Control

The XC7Z014S-2CLG484E fits factory-control systems that need deterministic hardware timing alongside embedded application software. Its 65,000 Artix-7 logic cells can implement machine vision preprocessing, encoder capture, timing functions, parallel I/O handling, and protocol conversion, while the single-core Arm Cortex-A9 runs control logic and communications at up to 766 MHz. This separation allows time-sensitive operations to execute in programmable logic while Linux-based or bare-metal software handles configuration, networking, and supervisory functions. Engineers should partition tasks according to real-time requirements and verify that processor timing, FPGA utilization, thermal conditions, and I/O-bank budgets satisfy the machine’s cycle-time specification.

🌐

Industrial Networking and Protocol Gateway

The XC7Z014S-2CLG484E is useful in industrial gateways where a 766 MHz Cortex-A9 processor must coexist with hardware-accelerated packet handling. The processor subsystem can manage Ethernet stacks, routing policies, configuration, and remote diagnostics, while the FPGA fabric performs parallel framing, filtering, compression, protocol conversion, or traffic classification. With 65,000 logic cells and 256 KB of on-chip RAM, the device supports moderate hardware pipelines without requiring a separate FPGA for every network function. The design should allocate memory and I/O carefully, isolate high-speed interfaces, and verify protocol timing through hardware-software co-design rather than assuming processor performance alone determines gateway throughput.

📺

Machine Vision and Image Processing

The XC7Z014S-2CLG484E supports compact machine-vision nodes by pairing programmable logic with a 766 MHz Arm processor. Pixel transport, thresholding, filtering, color processing, and other parallel stages can be assigned to the 65,000-cell Artix-7 fabric, while the processor controls image buffers, exposure, classification, communication, and system management. This architecture reduces the need for repeated processor transfers and can provide predictable latency for pixel pipelines. Practical implementations must budget memory bandwidth, use DDR memory carefully, keep high-speed interfaces impedance controlled, and partition the design so that FPGA timing closure and processor performance are validated independently before integration.

🔧

Data Acquisition and Instrumentation

The XC7Z014S-2CLG484E is well suited to instrumentation that combines high-rate sampling with a user-facing control processor. The programmable-logic fabric can implement counters, trigger logic, digital filters, waveform generation, and capture control, while the Cortex-A9 subsystem executes calibration, configuration, data analysis, and communication. Its 65,000 logic cells provide enough parallel capacity for moderate custom instrumentation, and the 256 KB of on-chip RAM supports control structures and short data buffers. For higher sample rates, external DDR memory and careful clock planning become essential. Engineers should establish clocking, trigger latency, analog-interface bandwidth, and timing-closure targets before finalizing the acquisition architecture.

🖥️

Embedded Edge Computing Gateway

The XC7Z014S-2CLG484E can serve as a compact edge-computing node for local control, protocol translation, and hardware-assisted analytics. The Arm Cortex-A9 at 766 MHz handles operating-system services, networking, storage access, and application code, while the Artix-7 fabric accelerates fixed-format computations or time-critical I/O. Its 65,000 logic cells make it suitable for moderate accelerator pipelines that benefit from deterministic hardware behavior. A practical design should boot through the supported configuration path, protect the device with a secure boot strategy, partition DDR memory for processor and FPGA use, and monitor thermal conditions because sustained processor and I/O activity can raise power dissipation beyond the idle budget.

🌐

Communications and Signal Processing

The XC7Z014S-2CLG484E fits communications equipment that requires flexible modulation, filtering, framing, or interface conversion. Parallel algorithms can run in the 65,000-cell Artix-7 fabric with deterministic latency, while the Cortex-A9 manages control-plane traffic, configuration, diagnostics, and higher-level protocols. The 484-CSPBGA package provides a large number of connections for DDR memory, control logic, transceivers, and external converters. Designers must examine transceiver I/O standards and bank voltage requirements, keep clock and data routes matched, and verify timing for the selected speed grade. Fixed-function accelerator blocks can improve efficiency, but their availability and exact configuration must be confirmed in the selected device view.

ملخص المنتجات الموصى بها

What is the AMD Xilinx XC7Z014S-2CLG484E?
The AMD Xilinx XC7Z014S-2CLG484E is a Zynq-7000 system-on-chip FPGA combining a single-core Arm Cortex-A9 processor with 65,000 Artix-7 logic cells. It operates at up to 766 MHz, includes 256 KB of on-chip RAM, and uses a 484-CSPBGA package measuring 19 mm by 19 mm. AMD characterizes this device as a single ARM Cortex-A9 MPCore with CoreSight system-on-chip, making it suitable for embedded control, signal processing, and heterogeneous hardware acceleration.
What are the key specifications of XC7Z014S-2CLG484E that engineers should know?
The XC7Z014S-2CLG484E integrates 65,000 programmable logic cells, a single-core Arm Cortex-A9 MPCore processor, CoreSight debug support, and 256 KB of on-chip RAM. Its processor reaches 766 MHz, and the device is offered in a 484-CSPBGA package with a 19 mm by 19 mm body. The -2 code identifies the performance grade, while E identifies the temperature grade. According to the AMD Zynq-7000 device documentation, the CLG484 package belongs to the Zynq-7000 SoC family.
Where can I download the XC7Z014S-2CLG484E datasheet PDF?
The XC7Z014S-2CLG484E datasheet PDF is available from AMD through the Zynq-7000 SoC document titled “Zynq-7000 SoC (Z-7007S, Z-7012S, Z-7014S, Z-7010, Z-7015, and Z-7020) Data Sheet.” The AMD document covers DC and AC switching characteristics for XC7Z014S and related devices. Use the AMD documentation link on this page for the current manufacturer file and consult the Zynq-7000 package pinout resources for ball-level assignment details.
Where can I find the XC7Z014S-2CLG484E pinout and package information?
The XC7Z014S-2CLG484E pinout is published through AMD’s Zynq-7000 Package Device Pinout Files, which provide package assignments in TXT and CSV formats. The device uses a 484-CSPBGA package with a 19 mm by 19 mm body. Use those package files when assigning PCB balls and reviewing power, ground, configuration, processor, and programmable-logic signals. The complete named 484-ball table is not reproduced on this page.
Can XC7Z014S-2CLG484E be used for industrial automation?
Yes, the XC7Z014S-2CLG484E is suitable for industrial automation systems that benefit from both hard real-time logic and embedded software. Its 65,000 logic cells can implement parallel sensor acquisition, protocol conversion, timing functions, and control logic, while the 766 MHz Arm Cortex-A9 subsystem runs communication stacks and supervisory code. The principal design constraints are power sequencing, FPGA and processor resource balance, thermal performance, and correct implementation of the manufacturer’s multi-supply decoupling guidance.
How does XC7Z014S-2CLG484E compare with XC7Z014S-1CLG484C?
The principal difference is the performance grade: XC7Z014S-2CLG484E reaches 766 MHz, while XC7Z014S-1CLG484C is listed at 667 MHz. Both devices place 65,000 logic cells and a single-core Arm Cortex-A9 processor in the 484-CSPBGA package. The -2 device therefore offers 99 MHz more processor headroom, approximately 14.8% above the -1 part, while the temperature-grade suffix must also be checked before approving a substitution.
When should I choose XC7Z014S-2CLG484E over XC7Z014S-1CLG484C?
Choose XC7Z014S-2CLG484E when processor performance is important and the higher 766 MHz operating rate provides useful scheduling or software-processing headroom. XC7Z014S-1CLG484C offers the same 65,000-cell logic capacity and 484-CSPBGA footprint at a listed 667 MHz. The choice should reflect the actual processor utilization, thermal design, qualification requirements, and temperature grade; a faster grade does not increase the FPGA fabric’s logic-cell count.
What is the best drop-in replacement for XC7Z014S-2CLG484E?
The closest same-footprint alternatives include XC7Z014S-2CLG484C, XC7Z014S-2CLG484I, and XC7Z014S-1CLG484C. They preserve the 484-CSPBGA package and 65,000-cell Zynq-7000 architecture, but speed grade or temperature grade may change. AMD states that XC7Z020-1CLG484 and XC7Z014S-1CLG484C use identical CLG484 pin resources while requiring device migration in Vivado, so package similarity alone does not guarantee automatic tool compatibility.
Can XC7Z014S-1CLG484C replace XC7Z014S-2CLG484E without PCB changes?
XC7Z014S-1CLG484C can use the same CLG484 package footprint, but it is not an unconditional functional substitution. Its listed processor speed is 667 MHz versus 766 MHz for XC7Z014S-2CLG484E, a 99 MHz or approximately 14.8% reduction. A design migration also requires checking timing, temperature grade, resource utilization, device identifiers, and the target settings in the Vivado project before production release.
What can replace XC7Z014S-2CLG484E?
Replacements for XC7Z014S-2CLG484E should use the 484-CSPBGA footprint and preserve the 65,000-cell Zynq-7000 architecture. Candidate speed-grade options include XC7Z014S-1CLG484C, while XC7Z014S-2CLG484C and XC7Z014S-2CLG484I cover different temperature-grade choices. Verify processor timing, supply requirements, exposed resources, Vivado target support, and manufacturing qualifications before treating any candidate as a drop-in production replacement.
Is XC7Z014S-2CLG484E the same as XC7Z020-1CLG484?
No, although both devices use the CLG484 package and AMD documents identical PS and PL pin resources for the pair. XC7Z020-1CLG484 is the larger Zynq-7000 device, while XC7Z014S-2CLG484E has 65,000 logic cells. AMD support information specifically notes that Vivado does not allow the smaller device to be targeted as a direct migration to the larger chip, so the larger device should not be treated as an automatic drop-in replacement.
Is there an AMD or Xilinx equivalent with the same CLG484 pinout?
AMD’s Zynq-7000 family contains several XC7Z014S speed and temperature options in CLG484, but no verified cross-manufacturer equivalent was identified. A same-package device must still be qualified for processor speed, thermal grade, power behavior, FPGA resources, and Vivado migration support. For a new AMD/Xilinx design, selecting another qualified XC7Z014S grade is generally more practical than using an unrelated FPGA family with superficially similar ball count.
Where can I buy XC7Z014S-2CLG484E and what is its price?
Use the Request a Quote form on this page to request the current XC7Z014S-2CLG484E price, stock position, and lead time. The form lets the quote reflect package markings, production quantities, and delivery requirements without embedding a price that may change. For scheduled production, include the target assembly date and required quantity so obsolete-risk, allocation, and date-code requirements can be reviewed before an order is placed.
Is XC7Z014S-2CLG484E in stock?
Current inventory should be confirmed through the Request a Quote form on this page rather than assumed from a catalog entry. A current distributor listing does not by itself guarantee allocation for every quantity or package marking. Submit the required quantity, target date, and acceptable delivery terms with your request. For production continuity, request a lifecycle and supply-risk review before committing the component to a long-running design.
What is the lead time for XC7Z014S-2CLG484E?
The current lead time for XC7Z014S-2CLG484E depends on available factory allocation, order quantity, and requested delivery date. Request a formal quotation through the Request a Quote form on this page and state the planned assembly date. Because this is a high-pin-count FPGA SoC, include the required quantity, traceability level, and any date-code restriction in the request so schedule and supply information can be evaluated together.
What design considerations matter for the XC7Z014S-2CLG484E power rails?
The XC7Z014S-2CLG484E requires careful implementation of the AMD-specified supply topology, startup sequence, decoupling, and grounding. The device combines a processing subsystem, programmable-logic fabric, memory, configuration resources, and multiple I/O banks, so each bank must be evaluated against its voltage and I/O-standard requirements. Place decoupling capacitors according to the manufacturer layout guidance, keep sensitive signals away from noisy supply paths, and verify sequencing with worst-case startup and shutdown conditions.

بيانات مرجعية هندسية لـ XC7Z014S-2CLG484E — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose XC7Z014S-2CLG484E when an embedded design needs the 766 MHz Cortex-A9 operating point, 65,000 logic cells, and the E temperature grade in a 484-CSPBGA package. Select XC7Z014S-2CLG484C or XC7Z014S-2CLG484I when the environmental qualification of the C or I grade is more appropriate and the processor can run at 766 MHz. Use XC7Z014S-1CLG484C, XC7Z014S-1CLG484I, or XC7Z014S-1CLG484E when the 667 MHz processor rate is sufficient. All five alternatives use the same CLG484 package, but a design still requires validation of timing, temperature grade, supply configuration, utilization, and Vivado migration support before production use.

المقارنة مع البدائل

المعامل هذا المنتج XC7Z014S-2CLG484C XC7Z014S-2CLG484I XC7Z014S-1CLG484C XC7Z014S-1CLG484I XC7Z014S-1CLG484E
Package 484-CSPBGA 484-CSPBGA 484-CSPBGA 484-CSPBGA 484-CSPBGA 484-CSPBGA
Brand AMD AMD AMD AMD AMD AMD
Programmable Logic Cells 65,000 cells 65,000 cells 65,000 cells 65,000 cells 65,000 cells 65,000 cells
Processor Single-core Arm Cortex-A9 MPCore with CoreSight Single-core Arm Cortex-A9 MPCore with CoreSight Single-core Arm Cortex-A9 MPCore with CoreSight Single-core Arm Cortex-A9 MPCore with CoreSight Single-core Arm Cortex-A9 MPCore with CoreSight Single-core Arm Cortex-A9 MPCore with CoreSight
Maximum Processor Frequency 766 MHz 766 MHz 766 MHz 667 MHz 667 MHz 667 MHz
On-Chip RAM 256 KB 256 KB 256 KB 256 KB 256 KB 256 KB
Temperature Grade E grade C grade I grade C grade I grade E grade
Speed Grade -2 -2 -2 -1 -1 -1
Processor Frequency Difference 766 MHz reference 0 MHz, 0% 0 MHz, 0% -99 MHz, approximately -14.8% -99 MHz, approximately -14.8% -99 MHz, approximately -14.8%
Package Body Size 19 mm x 19 mm 19 mm x 19 mm 19 mm x 19 mm 19 mm x 19 mm 19 mm x 19 mm 19 mm x 19 mm

أبرز الفروقات

  • Higher processor performance within the same XC7Z014S resource profile (مقابلXC7Z014S-1CLG484C)
  • Same 766 MHz performance as the -2 commercial-temperature variant (مقابلXC7Z014S-2CLG484C)
  • Full speed operation without reducing processor frequency (مقابلXC7Z014S-1CLG484I)

ملاحظات التصميم

Implement every processor, FPGA, memory, and I/O-bank supply according to the AMD Zynq-7000 power architecture and required startup sequence. Place the specified bulk and local decoupling capacitors close to their associated supply and ground balls, and use plane connections that minimize inductance. Verify startup, shutdown, voltage tolerances, and current limits under both processor-active and maximum-I/O configurations rather than relying only on nominal average power.

Use AMD’s CLG484 package files and ball-assignment documentation as the authoritative PCB footprint input. The 19 mm by 19 mm BGA requires careful escape routing, multiple PCB layers, via-in-pad or microvia strategy, and assembly-process controls. Preserve access to configuration, debug, reset, clock, and programming signals, and check the completed stackup against every high-speed memory or transceiver interface before release.

Separate processor clocks, configuration paths, memory interfaces, and sensitive I/O according to the manufacturer’s layout guidance. Keep switching supplies and high-current return paths away from clock and low-amplitude analog inputs. Use a continuous ground reference where the design rules permit it, match length and impedance for external DDR interfaces, and place termination close to the transmitting or receiving device. Perform post-layout signal-integrity and power-integrity checks on the final stackup.

Do not treat an identical CLG484 ball count as proof of an automatic device migration. Validate the Vivado part selection, migration path, processor clock limits, temperature grade, I/O standards, power configuration, and utilization report. A -1 device at 667 MHz versus the target’s 766 MHz can change processor timing by approximately 14.8%, while a different temperature suffix can change environmental qualification without changing the package footprint.

Estimate thermal performance for the highest expected processor load, DDR activity, and simultaneous I/O switching rather than using idle power. Distribute heat through the PCB and maintain airflow appropriate to the enclosure. Monitor junction margin at the worst ambient temperature, and account for temperature-dependent processor performance and configuration limits. Validate the final assembly with thermal imaging and electrical testing because the compact 19 mm by 19 mm package can concentrate heat near its power and memory balls.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer documentation identifies the device as an industrial programmable-logic and SoC product, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is listed in the available technical records.

تم التحقق من البيانات في: 2026-11-18 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

xc7z014s 1clg400c xc7z014s 1clg484c xc7z014s 1clg484i xc7z014s 1clg400i xc7z014s 2clg400i XC7Z014S-2CLG484E datasheet XC7Z014S-2CLG484E pinout XC7Z014S-2CLG484E datasheet pdf XC7Z014S-2CLG484E equivalent XC7Z014S-2CLG484E replacement XC7Z014S-2CLG484E vs XC7Z014S-1CLG484C XC7Z014S-2CLG484E footprint AMD XC7Z014S-2CLG484E XC7Z014S-2CLG484E price XC7Z014S-2CLG484E stock

المكونات والمصطلحات ذات الصلة

AMD Xilinx XC7Z014S-2CLG484E XC7Z014S-1CLG484C XC7Z014S-2CLG484C XC7Z014S-2CLG484I XC7Z014S-1CLG484I XC7Z014S-1CLG484E XC7Z020-1CLG484 Zynq-7000 SoC Artix-7 FPGA fabric Arm Cortex-A9 MPCore CoreSight system-on-chip FPGA programmable logic hardware accelerator 484-CSPBGA BGA package surface-mount package semiconductor Vivado DDR memory industrial automation machine vision
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر