XC7Z014S-2CLG484E - 65K Logic Cell SoC FPGA | AMD
MPN: XC7Z014S-2CLG484E ✓ 啟用中XC7Z014S-2CLG484E 概覽
A Zynq-7000 SoC is an FPGA and SoC in the same silicon device. Its Arm Cortex-A9 processing subsystem executes operating systems, networking stacks, control software, and application code, while the Artix-7 FPGA fabric implements parallel datapaths, custom accelerators, protocol engines, and time-critical logic. This programmable-logic-plus-processor hierarchy places the device between conventional FPGAs, microcontrollers, and dedicated application-specific processors.
The XC7Z014S offers 65,000 programmable logic cells for hardware customization, along with 766 MHz Arm Cortex-A9 performance and 256 KB of on-chip RAM. The -2 speed designation identifies the device performance grade, while the E suffix identifies its temperature grade. Its 484-pin CSPBGA package exposes the processing, programmable-logic, memory, power, ground, configuration, and general-purpose I/O resources required for a high-pin-count module design.
The heterogeneous architecture allows software to control the system while programmable logic handles deterministic data acquisition, filtering, waveform generation, video processing, or interface bridging. Pin multiplexing must be planned carefully because many hard I/O functions can be assigned to programmable I/O through the design toolchain. Power sequencing, bank-specific supply requirements, decoupling, configuration boot, and high-speed memory implementation are central PCB-design considerations for this device.
Typical uses include industrial automation and factory control, industrial Ethernet equipment, camera and image-processing systems, communications infrastructure, edge-computing gateways, instrumentation, and embedded vision. The Cortex-A9 subsystem handles network protocols and control logic, while the FPGA fabric can execute parallel algorithms such as filtering, packet inspection, data acquisition, and hardware-assisted image processing without relying solely on the processor.
A robust design should follow the AMD Zynq-7000 power, decoupling, configuration, and package-layout guidance. Use the recommended regulator topology for each supply bank, preserve the specified startup sequence, and validate high-speed interfaces with controlled impedance routing. Consider processor-resource and logic-resource utilization together because software placement, memory bandwidth, and hard I/O selection can determine whether the design fits the selected XC7Z014S device.
This product record combines package, processor, logic-capacity, memory, pinout-resource, comparison, sourcing, and implementation guidance in one engineering-focused reference. It also distinguishes speed-grade and temperature-grade alternatives that use the same CLG484 footprint, helping designers evaluate replacement options without overlooking migration constraints.
直接替換替代品,適用於 XC7Z014S-2CLG484E — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7Z014S-2CLG484E (相同外形與佔位) — 差異在於 Device Type, Package, Temperature Grade.
XC7Z014S-2CLG484C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7Z014S-2CLG484I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7Z014S-1CLG484C
✅ 直接替換聯絡詢價
查看資料表 →XC7Z014S-1CLG484I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC7Z014S-1CLG484E
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC7Z014S-2CLG484E 最大額定值與電氣特性
| Device Type | Zynq-7000 system-on-chip FPGA |
| FPGA Logic Family | Artix-7 FPGA fabric |
| Programmable Logic Cells | 65,000 cells |
| Processor | Arm Cortex-A9 MPCore |
| Processor Core Count | 1 core |
| Processor Maximum Frequency | 766 MHz |
| Debug Support | CoreSight |
| On-Chip RAM | 256 KB |
| 封裝 | 484-CSPBGA |
| Package Body Size | 19 mm x 19 mm |
| Package Pin Count | 484 pins |
| 安裝類型 | Surface mount |
| Speed Grade | -2 |
| Temperature Grade | E grade |
XC7Z014S-2CLG484E 484 pins 腳位配置指南
XC7Z014S-2CLG484E(484 pins 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7Z014S-2CLG484E.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7Z014S-2CLG484E 適用於 6 應用s: Industrial Automation and Factory Control, Industrial Networking and Protocol Gateway, Machine Vision and Image Processing, Data Acquisition and Instrumentation, Embedded Edge Computing Gateway, Communications and Signal Processing.
Industrial Automation and Factory Control
The XC7Z014S-2CLG484E fits factory-control systems that need deterministic hardware timing alongside embedded application software. Its 65,000 Artix-7 logic cells can implement machine vision preprocessing, encoder capture, timing functions, parallel I/O handling, and protocol conversion, while the single-core Arm Cortex-A9 runs control logic and communications at up to 766 MHz. This separation allows time-sensitive operations to execute in programmable logic while Linux-based or bare-metal software handles configuration, networking, and supervisory functions. Engineers should partition tasks according to real-time requirements and verify that processor timing, FPGA utilization, thermal conditions, and I/O-bank budgets satisfy the machine’s cycle-time specification.
推薦
Industrial Networking and Protocol Gateway
The XC7Z014S-2CLG484E is useful in industrial gateways where a 766 MHz Cortex-A9 processor must coexist with hardware-accelerated packet handling. The processor subsystem can manage Ethernet stacks, routing policies, configuration, and remote diagnostics, while the FPGA fabric performs parallel framing, filtering, compression, protocol conversion, or traffic classification. With 65,000 logic cells and 256 KB of on-chip RAM, the device supports moderate hardware pipelines without requiring a separate FPGA for every network function. The design should allocate memory and I/O carefully, isolate high-speed interfaces, and verify protocol timing through hardware-software co-design rather than assuming processor performance alone determines gateway throughput.
推薦
Machine Vision and Image Processing
The XC7Z014S-2CLG484E supports compact machine-vision nodes by pairing programmable logic with a 766 MHz Arm processor. Pixel transport, thresholding, filtering, color processing, and other parallel stages can be assigned to the 65,000-cell Artix-7 fabric, while the processor controls image buffers, exposure, classification, communication, and system management. This architecture reduces the need for repeated processor transfers and can provide predictable latency for pixel pipelines. Practical implementations must budget memory bandwidth, use DDR memory carefully, keep high-speed interfaces impedance controlled, and partition the design so that FPGA timing closure and processor performance are validated independently before integration.
推薦
Data Acquisition and Instrumentation
The XC7Z014S-2CLG484E is well suited to instrumentation that combines high-rate sampling with a user-facing control processor. The programmable-logic fabric can implement counters, trigger logic, digital filters, waveform generation, and capture control, while the Cortex-A9 subsystem executes calibration, configuration, data analysis, and communication. Its 65,000 logic cells provide enough parallel capacity for moderate custom instrumentation, and the 256 KB of on-chip RAM supports control structures and short data buffers. For higher sample rates, external DDR memory and careful clock planning become essential. Engineers should establish clocking, trigger latency, analog-interface bandwidth, and timing-closure targets before finalizing the acquisition architecture.
推薦
Embedded Edge Computing Gateway
The XC7Z014S-2CLG484E can serve as a compact edge-computing node for local control, protocol translation, and hardware-assisted analytics. The Arm Cortex-A9 at 766 MHz handles operating-system services, networking, storage access, and application code, while the Artix-7 fabric accelerates fixed-format computations or time-critical I/O. Its 65,000 logic cells make it suitable for moderate accelerator pipelines that benefit from deterministic hardware behavior. A practical design should boot through the supported configuration path, protect the device with a secure boot strategy, partition DDR memory for processor and FPGA use, and monitor thermal conditions because sustained processor and I/O activity can raise power dissipation beyond the idle budget.
推薦
Communications and Signal Processing
The XC7Z014S-2CLG484E fits communications equipment that requires flexible modulation, filtering, framing, or interface conversion. Parallel algorithms can run in the 65,000-cell Artix-7 fabric with deterministic latency, while the Cortex-A9 manages control-plane traffic, configuration, diagnostics, and higher-level protocols. The 484-CSPBGA package provides a large number of connections for DDR memory, control logic, transceivers, and external converters. Designers must examine transceiver I/O standards and bank voltage requirements, keep clock and data routes matched, and verify timing for the selected speed grade. Fixed-function accelerator blocks can improve efficiency, but their availability and exact configuration must be confirmed in the selected device view.
推薦
推薦產品摘要
工程參考資料,適用於 XC7Z014S-2CLG484E — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7Z014S-2CLG484C | XC7Z014S-2CLG484I | XC7Z014S-1CLG484C | XC7Z014S-1CLG484I | XC7Z014S-1CLG484E |
|---|---|---|---|---|---|---|
| Package | 484-CSPBGA | 484-CSPBGA | 484-CSPBGA | 484-CSPBGA | 484-CSPBGA | 484-CSPBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Programmable Logic Cells | 65,000 cells | 65,000 cells | 65,000 cells | 65,000 cells | 65,000 cells | 65,000 cells |
| Processor | Single-core Arm Cortex-A9 MPCore with CoreSight | Single-core Arm Cortex-A9 MPCore with CoreSight | Single-core Arm Cortex-A9 MPCore with CoreSight | Single-core Arm Cortex-A9 MPCore with CoreSight | Single-core Arm Cortex-A9 MPCore with CoreSight | Single-core Arm Cortex-A9 MPCore with CoreSight |
| Maximum Processor Frequency | 766 MHz | 766 MHz | 766 MHz | 667 MHz | 667 MHz | 667 MHz |
| On-Chip RAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Temperature Grade | E grade | C grade | I grade | C grade | I grade | E grade |
| Speed Grade | -2 | -2 | -2 | -1 | -1 | -1 |
| Processor Frequency Difference | 766 MHz reference | 0 MHz, 0% | 0 MHz, 0% | -99 MHz, approximately -14.8% | -99 MHz, approximately -14.8% | -99 MHz, approximately -14.8% |
| Package Body Size | 19 mm x 19 mm | 19 mm x 19 mm | 19 mm x 19 mm | 19 mm x 19 mm | 19 mm x 19 mm | 19 mm x 19 mm |
主要差異化特點
- Higher processor performance within the same XC7Z014S resource profile (對比XC7Z014S-1CLG484C)
- Same 766 MHz performance as the -2 commercial-temperature variant (對比XC7Z014S-2CLG484C)
- Full speed operation without reducing processor frequency (對比XC7Z014S-1CLG484I)
設計說明
Implement every processor, FPGA, memory, and I/O-bank supply according to the AMD Zynq-7000 power architecture and required startup sequence. Place the specified bulk and local decoupling capacitors close to their associated supply and ground balls, and use plane connections that minimize inductance. Verify startup, shutdown, voltage tolerances, and current limits under both processor-active and maximum-I/O configurations rather than relying only on nominal average power.
Use AMD’s CLG484 package files and ball-assignment documentation as the authoritative PCB footprint input. The 19 mm by 19 mm BGA requires careful escape routing, multiple PCB layers, via-in-pad or microvia strategy, and assembly-process controls. Preserve access to configuration, debug, reset, clock, and programming signals, and check the completed stackup against every high-speed memory or transceiver interface before release.
Separate processor clocks, configuration paths, memory interfaces, and sensitive I/O according to the manufacturer’s layout guidance. Keep switching supplies and high-current return paths away from clock and low-amplitude analog inputs. Use a continuous ground reference where the design rules permit it, match length and impedance for external DDR interfaces, and place termination close to the transmitting or receiving device. Perform post-layout signal-integrity and power-integrity checks on the final stackup.
Do not treat an identical CLG484 ball count as proof of an automatic device migration. Validate the Vivado part selection, migration path, processor clock limits, temperature grade, I/O standards, power configuration, and utilization report. A -1 device at 667 MHz versus the target’s 766 MHz can change processor timing by approximately 14.8%, while a different temperature suffix can change environmental qualification without changing the package footprint.
Estimate thermal performance for the highest expected processor load, DDR activity, and simultaneous I/O switching rather than using idle power. Distribute heat through the PCB and maintain airflow appropriate to the enclosure. Monitor junction margin at the worst ambient temperature, and account for temperature-dependent processor performance and configuration limits. Validate the final assembly with thermal imaging and electrical testing because the compact 19 mm by 19 mm package can concentrate heat near its power and memory balls.
合規資訊
The manufacturer documentation identifies the device as an industrial programmable-logic and SoC product, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is listed in the available technical records.