XC9536XL-10VQ64C - 36-Macrocell 3.3V CPLD | AMD
MPN: XC9536XL-10VQ64C ✓ نشطXC9536XL-10VQ64C نظرة عامة
A complex programmable logic device is a user-programmable semiconductor that sits between fixed-function logic and an FPGA. It stores a configuration in non-volatile memory, retains that configuration after power removal, and provides predictable routing and propagation delays without external configuration loading. Within the product hierarchy, the XC9536XL is a CPLD, which is a programmable logic device, which is an integrated circuit used for digital control, interface, decode, and bus-arbitration functions.
Principal characteristics include a 0.35 µm CMOS implementation, 3.3 V operation, 36 macrocells, and 800 equivalent gates. The -10 suffix identifies the 10 ns device speed grade, while VQ64 identifies the 64-pin VQFP package and C identifies the commercial temperature grade. These distinctions make the complete ordering code important when matching a legacy board revision, because speed grade, package, and temperature class must all agree for a true pin-to-pin substitution.
The architecture supports designs that require stable logic operation across power cycles, including boot control, peripheral decode, state machines, and address decoding. Its non-volatile configuration removes the configuration-port sequencing normally associated with SRAM-based programmable logic. Because the XC9500XL architecture is not register based, timing behavior is deterministic and is well suited to control logic where repeatable execution and clear timing reports are more valuable than large register-based logic arrays.
Typical applications include industrial controller interface logic, automated test equipment, instrumentation, peripheral bus arbitration, legacy system glue logic, and compact embedded control platforms. The 64-pin package also provides enough I/O for multi-bit data interfaces and address lines while keeping the design physically manageable for multilayer printed circuit boards.
When laying out the PCB, use the package drawing and pin table in DS058 to assign every power, ground, configuration, clock, and user-I/O connection. Place bypass capacitors at the power pins, route configuration and clock signals away from switching nodes, and reserve programming access if the configuration must be updated after assembly.
This product page combines the device specifications with package, pricing, cross-reference, and design guidance. It also distinguishes direct orderable variants from functional substitutes that require a board redesign, helping engineers qualify replacements without assuming that every similarly sized programmable-logic device is electrically or mechanically interchangeable.
بدائل مباشرة لـ XC9536XL-10VQ64C — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع XC9536XL-10VQ64C (نفس عامل الشكل والبصمة) — يختلف في Package, Lead-Free Status, RoHS Status, Boundary Scan, Configuration Memory.
XC9536XL-10VQ64I
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←XC9536XL-10VQG64C
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC9536XL-10VQG64I
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC9536XL-10VQ64C0768
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
XC9536XL-10VQ64C الحدود القصوى والخصائص الكهربائية
| Device Type | Complex programmable logic device (CPLD) |
| Programmable Logic Family | XC9500XL high-performance CPLD |
| Number of Macrocells | 36 macrocells |
| Equivalent Gate Count | 800 gates |
| Maximum System Frequency | 100 MHz |
| Speed Grade | 10 ns |
| Core Supply Voltage | 3.3 V |
| Process Technology | 0.35 µm CMOS |
| Configuration Memory | Non-volatile |
| العلبة | VQFP-64 (10 x 10 mm) |
| عدد الدبابيس | 64 pins |
| نوع التركيب | Surface mount |
| Temperature Grade | Commercial (0 °C to +70 °C) |
| Pin-to-Pin Logic Delay | 5 ns |
| I/O Voltage Tolerance | 5 V tolerant inputs |
| Output Voltage Capability | 3.3 V or 2.5 V |
| Lead-Free Status | Pb-free option available in the XC9500XL family |
| حالة RoHS | Compliant |
دليل تكوين أطراف XC9536XL-10VQ64C vqfp-64 (10 x 10 mm)
تكوين الأطراف لـ XC9536XL-10VQ64C (حزمة vqfp-64 (10 x 10 mm)). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.
لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC9536XL-10VQ64C.
راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.
التطبيقات النموذجية
XC9536XL-10VQ64C مناسب لـ 6 التطبيقs: Industrial Peripheral Interface Logic, Test and Measurement Equipment Control, Legacy System Glue Logic, Multi-Bit Data Interface Bridging, Boot and Power Sequencing Control, Audio and Communication Equipment Control.
Industrial Peripheral Interface Logic
The AMD XC9536XL-10VQ64C fits peripheral-interface, address-decoding, and bus-arbitration logic in compact industrial controllers. Its 36 macrocells provide enough capacity for multiple state machines and control signals, while the 100 MHz system-frequency rating supports deterministic control paths. Non-volatile configuration allows the controller to execute its logic immediately after power restoration without an external configuration sequence. The 3.3 V core and 5 V tolerant inputs also simplify interfacing with mixed-voltage peripherals. Validate every board signal against the pin table in DS058, and use the commercial-rated variant only where the enclosure temperature remains within 0 °C to +70 °C.
موصى به
Test and Measurement Equipment Control
The XC9536XL-10VQ64C is useful in automated test equipment for sequencing instruments, interpreting status flags, and multiplexing control signals. Its 10 ns speed class and 5 ns pin-to-pin logic delay provide predictable timing for trigger and handshake paths, while the 100 MHz system-frequency rating allows the CPLD to combine several slower instrument-control functions in one device. Non-volatile configuration also helps preserve a stable boot sequence after instrument power cycling. Keep configuration and clock routing away from analog and high-energy switching nodes, and follow the DS058 package drawing to preserve clearance around the 64-pin VQFP footprint.
موصى به
Legacy System Glue Logic
The AMD XC9536XL-10VQ64C is a strong candidate for maintaining or cloning legacy systems where processor, memory, and peripheral buses must be arbitrated with deterministic timing. Its 36 macrocells can implement address decoding, command sequencing, interrupt control, and programmable timing without loading the main processor. The 100 MHz system-frequency rating is more than adequate for common bus-control functions, and non-volatile configuration avoids adding an external configuration PROM or complex serial-load controller. When qualifying a replacement, compare the complete ordering code and pin table rather than relying only on the 36-macrocell and 100 MHz headline ratings.
موصى به
Multi-Bit Data Interface Bridging
The XC9536XL-10VQ64C can implement byte- or bit-level interface adaptation between processors and slower peripherals, including command normalization, FIFO control, and protocol state machines. Sixty-four pins provide a useful mix of user I/O for bus steering and handshake signals, while the 10 ns speed grade supports short combinational datapaths. The device is especially useful when several scattered gates would otherwise require multiple packages and complicate routing. Keep clock-domain crossing logic deliberate, use the I/O voltage guidance in DS058 for mixed-voltage connections, and verify output drive requirements against the external bus load.
موصى به
Boot and Power Sequencing Control
The AMD XC9536XL-10VQ64C can supervise power-up events, gate reset lines, and order the release of clocks and peripheral rails. Its deterministic CPLD behavior and non-volatile configuration make it suitable for repeatable startup sequences that must occur on every power cycle. The 36 macrocells can combine reset synchronization, fault latches, and supervisory timers without relying on software initialization. Because the commercial variant is specified for 0 °C to +70 °C, use XC9536XL-10VQ64I for wider industrial environments. Confirm power-pin, ground-pin, and configuration-pin placement directly from the DS058 package drawing.
موصى به
Audio and Communication Equipment Control
The XC9536XL-10VQ64C is suitable for control-plane logic in audio and communication equipment, such as codec reset sequencing, mute control, routing control, and status multiplexing. The 100 MHz system-frequency rating and 10 ns speed class provide ample margin for these control paths, and the 64-pin VQFP package supports parallel control buses without requiring several small logic packages. Its non-volatile configuration ensures consistent startup behavior in equipment where audible control states must be repeatable. Keep digital control routes isolated from clock and data lines of sensitive converters, and observe the DS058 I/O and power guidance during schematic review.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ XC9536XL-10VQ64C — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | XC9536XL-10VQ64I | XC9536XL-10VQG64C | XC9536XL-10VQG64I | XC9536XL-10VQ64C0768 |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | VQFP-64 (10 x 10 mm) | VQFP-64 (10 x 10 mm) | VQFP-64 (10 x 10 mm) | VQFP-64 (10 x 10 mm) | VQFP-64 (10 x 10 mm) |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD |
| Number of Macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells | 36 macrocells |
| Equivalent Gates | 800 gates | 800 gates | 800 gates | 800 gates | 800 gates |
| Core Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Speed Grade | 10 ns | 10 ns | 10 ns | 10 ns | 10 ns |
| Maximum System Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Temperature Grade | Commercial (0 °C to +70 °C) | Industrial | Commercial (0 °C to +70 °C) | Industrial | Commercial (0 °C to +70 °C) |
| Configuration Memory | Non-volatile | Non-volatile | Non-volatile | Non-volatile | Non-volatile |
أبرز الفروقات
- Direct commercial-grade family match with the same 10 ns speed class (مقابلXC9536XL-10VQ64C0768)
- Temperature-grade flexibility without a logical or footprint redesign (مقابلXC9536XL-10VQ64I)
- Same core density and timing in an alternate grid-package order code (مقابلXC9536XL-10VQG64C)
ملاحظات التصميم
Use the DS058 package drawing and pin-description table to assign the VQFP-64 footprint. Place the decoupling capacitor network at the device power pins and connect the ground pins to the shortest practical ground plane region. Because the device supports configuration, clock, and user I/O in the same package, preserve the pin locations required by the programmed design; changing package code or orientation can invalidate an otherwise equivalent substitution.
Keep clock and configuration nets short, route them away from high-current switching paths, and provide a ground reference adjacent to each routed clock. The XC9536XL-10VQ64C is intended for deterministic control logic rather than high-speed serial interfaces, so treat the 100 MHz system-frequency figure as a timing-class guideline rather than permission to add long routing without analysis. Validate timing in the actual design tool with the selected speed grade and board assumptions.
Do not treat a functionally similar CPLD as a board-level drop-in replacement. The XC9536XL-10VQ64I, XC9536XL-10VQG64C, XC9536XL-10VQG64I, and XC9536XL-10VQ64C0768 remain within the same device family, but package code and temperature grade still require confirmation. Cross-brand devices may use different pin assignments, configuration methods, and toolchains, so any board conversion needs a new schematic review, layout comparison, and timing recompile.
معلومات الامتثال
The product listing identifies the device as RoHS compliant, and DS058 identifies Pb-free options in the XC9500XL family. No separate REACH, halogen-free, conflict-minerals, or AEC-Q100 declaration is stated for this ordering code.