AMD

XC9536XL-10VQ64I - 36-Macrocell 3.3V CPLD | AMD

MPN: XC9536XL-10VQ64I ✗ End of Life
3.3 V Vdss 64-pin VQFP, 10 mm × 10 mm Package 100 MHz Speed
MOQ: 1 |

XC9536XL-10VQ64I Overview

The AMD XC9536XL-10VQ64I is a 36-macrocell CPLD operating from a 3.3 V supply in a 64-pin VQFP package, with 36 user I/O pins and up to 100 MHz system performance. Its -10 speed designation corresponds to a 5 ns pin-to-pin logic delay, while the XC9500XL architecture supports an internal system frequency of up to 208 MHz. The device also provides 5 V-tolerant inputs, 3.3 V or 2.5 V output capability, in-system programming, and bus-hold circuitry on user inputs.

A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines a relatively small number of nonvolatile macrocells with a programmable interconnect. Within the broader hierarchy of programmable-logic devices, the XC9500XL family belongs to the CPLD segment rather than the FPGA segment. Its deterministic timing, relatively simple architecture, and nonvolatile configuration make it suitable for consolidating fixed control, interface, decode, and glue-logic functions into one package.

Three headline characteristics define the XC9536XL-10VQ64I: 36 macrocells, 36 I/O pins, and a 3.3 V core supply. The device provides approximately 800 usable gates in the XC9500XL product description. Individual output enables, local output inversion, and input hysteresis support practical board-level implementation, while bus-hold behavior helps retain valid logic states during system operation. The industrial-temperature I suffix identifies the relevant ordering variant for industrial environments.

The device uses 0.35 µm CMOS technology and supports in-system programming with a specified minimum of 10,000 program or erase cycles. Its boundary-scan support, individual input features, and hot-pluggable interfaces align with established CPLD design practices. Signal outputs can operate at 3.3 V or 2.5 V, and the input structure accepts 5 V, 3.3 V, and 2.5 V signals. Exact timing, current, and absolute-maximum ratings should be taken from the AMD XC9536XL High Performance CPLD datasheet DS058.

Typical uses include industrial control logic, telecommunications interface consolidation, peripheral address decoding, programmable bus arbitration, and compact general-purpose logic in legacy or long-lifecycle equipment. The 64-pin VQFP provides enough I/O for multiplexed buses, status and control signals, and multiple external interfaces. The -10 grade is appropriate when approximately 10 ns-class external logic timing is sufficient, while a faster grade may be preferred for more demanding clocked interfaces.

The primary PCB consideration is decoupling. Place the required supply capacitors close to the power and ground pins, keep clock and high-speed routing short, and provide unobstructed return paths beneath the package. Because the XC9536XL is a nonvolatile CPLD, verify the programmed configuration, pin assignments, and voltage compatibility before substituting a different device or package.

This page consolidates the verified device specifications, ordered-part-number differences, package constraints, and practical selection criteria. It also separates true package-compatible alternatives from broader CPLD equivalents that require design verification, helping engineers identify the exact XC9500XL replacement behavior needed for an existing PCB.

Drop-in alternatives for XC9536XL-10VQ64I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with XC9536XL-10VQ64I (same form factor and footprint) — differing in Package, Lead-Free Status, RoHS Status, Number of Macrocells, Boundary Scan.

AMD
Package: VQFP-64 (10 x 10 mm)
Lead-Free Status: Pb-free option available in the XC9500XL family
RoHS Status: Compliant
Compare with XC9536XL-10VQ64I →
AMD
Package: 64-pin VTQFP, 10 mm x 10 mm
Lead-Free Status: Lead Free
RoHS Status: RoHS Compliant
Compare with XC9536XL-10VQ64I →

XC9536XL-7VQ64I

✅ Drop-In
AMD
📦 64-pin VQFP
Complex Programmable Logic Device (CPLD) · In-System Programmable · 10,000 cycles · 36 macrocells · 36 I/O · 800 gates · 5 ns · Up to 125 MHz

Contact for price

View Datasheet →

XC9536XL-10VQG64I

✅ Drop-In
📦 64-pin VQFP
Same -10 speed grade, 3.3 V supply, 36 macrocells, 36 I/O, and 64-pin format; package code G differs from Q

📋 Reference alternative (not in catalog)

XC9536XL-10VQG64C

✅ Drop-In
📦 64-pin VQFP
Same -10 timing grade and core electrical architecture; C suffix indicates the commercial-temperature variant rather than industrial I

📋 Reference alternative (not in catalog)

XC9536XL-10VQ64C

✅ Drop-In
AMD
📦 64-pin VQFP
Complex programmable logic device (CPLD) · XC9500XL high-performance CPLD · 36 macrocells · 800 gates · 100 MHz · 10 ns · 3.3 V · 0.35 µm CMOS

Contact for price

View Datasheet →

XC9536XL-7VQG64C

✅ Drop-In ⚠️ Specs Unverified
AMD
📦 64-pin VQFP
Complex Programmable Logic Device (CPLD) · FastFLASH XC9500XL · 36 · 36 · 800 · 125 MHz · 7.5 ns · 5 ns

Contact for price

View Datasheet →

XC9536XL-10VQ64I Maximum Ratings & Electrical Characteristics

Device Type Complex Programmable Logic Device (CPLD)
Device Family XC9500XL
Core Supply Voltage 3.3 V
Number of Macrocells 36 macrocells
Number of User I/O Pins 36 I/O
Usable Logic Gates 800 gates
Maximum System Frequency 100 MHz
Pin-to-Pin Logic Delay 5 ns
Internal System Frequency 208 MHz
Process Technology 0.35 µm CMOS
Package 64-pin VQFP, 10 mm × 10 mm
Input Signal Compatibility 5 V, 3.3 V, and 2.5 V
Output Voltage Capability 3.3 V or 2.5 V
Programming Type In-System Programmable
Program and Erase Cycles Minimum 10,000 cycles
Output Enable Control Individual output enable per output pin
Local Output Inversion Supported
Input Hysteresis Supported on user and boundary-scan inputs
Bus Hold Supported on user input pins
Hot-Plugging Capability Supported
Boundary Scan IEEE 1149.1-compatible boundary-scan support
RoHS Status RoHS non-compliant
Lead-Free Status Contains lead

XC9536XL-10VQ64I 64-pin vqfp, 10 mm × 10 mm Pin Configuration Guide

Pin configuration for XC9536XL-10VQ64I (64-pin vqfp, 10 mm × 10 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

64-pin vqfp, 10 mm × 10 mm package pinout diagram for XC9536XL-10VQ64I

No detailed pinout data available for XC9536XL-10VQ64I.

Refer to the datasheet for full pin configuration.

Typical Applications

XC9536XL-10VQ64I is suitable for 6 applications: Industrial Control Logic, Telecommunications Interface Consolidation, Peripheral Address Decoding, Programmable Bus Arbitration, Legacy Equipment Maintenance, LED and Display Control.

🏭

Industrial Control Logic

The XC9536XL-10VQ64I fits compact industrial control boards that require deterministic programmable logic near the processor or field interface. Its 36 macrocells and 36 user I/O can consolidate decoding, interlock logic, latch controls, alarm handling, and status multiplexing without a larger FPGA. The -10 grade provides 5 ns pin-to-pin logic delay, while the device operates from 3.3 V and accepts 5 V-tolerant inputs for compatibility with 5 V, 3.3 V, and 2.5 V system signals. The I suffix supports industrial-temperature use when the exact operating range is acceptable. In-system programming also permits configuration during production test without adding a separate socketed programming arrangement.

🌐

Telecommunications Interface Consolidation

The XC9536XL-10VQ64I is suitable for telecommunications equipment requiring a compact interface and protocol glue-logic device. Its 36 I/O pins provide enough parallel signals for address selection, command decoding, control lines, and status multiplexing, while the 5 ns pin-to-pin delay supports shorter combinational paths than a generic 10 ns design target. The 3.3 V core supply integrates with modern line-card logic, and 5 V-tolerant inputs simplify interfacing with mixed-voltage legacy circuits. Bus hold, input hysteresis, individual output enables, and hot-pluggable interfaces improve behavior in controlled, multi-board equipment. Boundary-scan support can also simplify board-level diagnostic and production-test workflows.

🔧

Peripheral Address Decoding

The XC9536XL-10VQ64I can implement distributed peripheral address decoding and chip-select generation in embedded systems. A 36-macrocell device provides more capacity than a small fixed PAL while retaining the relatively simple programming model of the XC9500XL CPLD family. Its 5 ns pin-to-pin logic delay gives designers useful timing margin for decoder paths, and individual output enables allow each decoded select to be controlled independently. Local inversion and input hysteresis help implement active-low controls and improve noise tolerance. The 64-pin VQFP also exposes enough pins for several chip-select outputs, banked enables, and bus-status inputs without requiring a larger programmable-logic package.

🖥️

Programmable Bus Arbitration

The XC9536XL-10VQ64I can implement arbitration, request prioritization, timeout, and bus-transfer sequencing in systems that need autonomous logic between a processor and peripheral devices. The device's 36 macrocells can hold multiple state machines in parallel, while its 36 I/O pins accommodate requests, grants, busy indicators, arbitration outputs, and bus-control signals. The -10 timing grade provides a 5 ns pin-to-pin logic delay for shorter decision paths, and local output inversion simplifies active-low handshake conventions. Individual output enables support tri-state or isolation behavior where required. Nonvolatile configuration makes the arbitration policy stable across power cycles and suitable for long-lifecycle control or instrumentation equipment.

🔧

Legacy Equipment Maintenance

The XC9536XL-10VQ64I is well suited to maintaining legacy electronic equipment whose original design depends on a discrete XC9500XL CPLD. Its nonvolatile configuration, 36 macrocells, 36 I/O, and 64-pin VQFP format support direct board-level continuity when an equivalent ordering variant meets the required timing and temperature grades. For industrial systems, the I suffix is the appropriate ordering family; a C suffix may require temperature derating or qualification review. In-system programming and boundary-scan support help production technicians configure and diagnose replacements. A lifecycle-conscious purchasing plan should also preserve the original programming file, pin assignment, and device identification information before maintenance quantities are consumed.

📺

LED and Display Control

The XC9536XL-10VQ64I can manage display sequencing, LED drive multiplexing, keypad scanning, and panel status logic in compact embedded products. Thirty-six user I/O are sufficient for multiple display lines, indicator outputs, key inputs, and control signals, while the 36 macrocells support multiple counters, state machines, and decode tables. Its 5 ns pin-to-pin logic delay is useful in scan chains where input qualification and output update timing are important. The 3.3 V core supply can operate outputs at 3.3 V or 2.5 V, and 5 V-tolerant inputs can simplify connection to selected legacy panel signals. Proper current limiting and voltage-level verification remain external to the CPLD.

Recommended Products Summary

XC9536XL-10VQ64C AMD Used in: Industrial Control Logic, Telecommunications Interface Consolidation, Programmable Bus Arbitration, Legacy Equipment Maintenance XC9536XL-7VQ64I AMD Used in: Industrial Control Logic, Peripheral Address Decoding, LED and Display Control XC9536XL-10VQG64I Same-family 64-pin variant for interface consolidation Used in: Telecommunications Interface Consolidation, Programmable Bus Arbitration, Legacy Equipment Maintenance XC9536XL-10VQG64C Package-compatible commercial-temperature decoding device Used in: Peripheral Address Decoding XC9536XL-7VQG64C AMD Used in: LED and Display Control
What are the key specifications of XC9536XL-10VQ64I that engineers should know?
The XC9536XL-10VQ64I is a 3.3 V CPLD with 36 macrocells, 36 user I/O pins, and a 64-pin VQFP package. According to AMD datasheet DS058, the -10 grade provides a 5 ns pin-to-pin logic delay and supports system operation up to 100 MHz, with internal system frequency reaching 208 MHz. Its 0.35 µm XC9500XL architecture also provides in-system programming, bus hold, input hysteresis, individual output enables, and 5 V-tolerant inputs.
Where can I download the XC9536XL-10VQ64I datasheet PDF?
The XC9536XL-10VQ64I datasheet is available from AMD as document DS058, titled XC9536XL High Performance CPLD. The official document is hosted at https://docs.amd.com/v/u/en-US/ds058. Use the pin-description table, timing tables, electrical characteristics, and programming information in DS058 when assigning pins and validating the final board design. The -10 and I suffix identify the speed grade and temperature grade, respectively.
Where can I find the XC9536XL-10VQ64I pinout?
Use the pin-description table in AMD datasheet DS058 for the authoritative XC9536XL-10VQ64I pinout. The device is specified in a 64-pin VQFP package measuring 10 mm by 10 mm. The table identifies configuration pins, power, ground, user I/O, dedicated inputs, and other package-specific functions. The page does not reproduce a complete pin list because a partial table could cause incorrect PCB assignments; use the manufacturer pin table directly.
What is the XC9536XL-10VQ64I equivalent to?
The closest same-family drop-in variants are other 64-pin XC9500XL speed, package, and temperature options such as XC9536XL-7VQ64I, XC9536XL-10VQG64I, and XC9536XL-10VQ64C. According to AMD DS058, the XC9500XL devices share the architecture and package options, but suffix changes can alter speed grade, temperature grade, or commercial qualification. Confirm the exact datasheet ordering table before replacing the target.
What can replace XC9536XL-10VQ64I on an existing PCB?
The best direct replacement is a 64-pin XC9536XL ordering variant with the required speed grade, temperature range, and commercial status. XC9536XL-7VQ64I is faster, while XC9536XL-10VQ64C differs primarily in commercial-temperature qualification. Broader Lattice, Atmel, and Altera CPLDs may offer similar functions, but the cross-reference information does not establish identical 64-pin footprints, so they are not treated as guaranteed drop-in replacements.
What is the difference between XC9536XL-10VQ64I and XC9536XL-7VQ64I?
The XC9536XL-7VQ64I is the faster timing grade than the XC9536XL-10VQ64I. The numeric suffix identifies the speed grade, with -7 corresponding to 7 ns-class timing and -10 to 10 ns-class timing; the listed XC9536XL-10VQ64I specification includes a 5 ns pin-to-pin logic delay. Both retain the XC9500XL architecture, 36 macrocells, and 64-pin VQFP format, making the -7 version a package-compatible option where speed is required.
Is XC9536XL-10VQ64I suitable for industrial control applications?
The XC9536XL-10VQ64I is suitable for industrial control functions when the operating-temperature requirements of the I suffix satisfy the system. It provides 36 macrocells and 36 I/O in a 64-pin VQFP, plus in-system programming, bus hold, input hysteresis, and individual output enables. According to AMD datasheet DS058, the family is intended for high-performance 3.3 V systems; verify the exact temperature limits and industrial qualification details before releasing production hardware.
Can XC9536XL-10VQ64I interface with 5 V signals?
The XC9536XL-10VQ64I has 5 V-tolerant inputs that accept 5 V, 3.3 V, and 2.5 V signals. Its outputs can operate at 3.3 V or 2.5 V. Input tolerance does not imply that every output can safely drive a 5 V load or that any powered-down interface can accept an unrestricted voltage. Follow the absolute-maximum ratings and pin-specific guidance in AMD datasheet DS058 when connecting external circuitry.
How does the XC9536XL-10VQ64I support programming and configuration?
The XC9536XL-10VQ64I is an in-system-programmable, nonvolatile CPLD with a specified minimum of 10,000 program or erase cycles. Its architecture also includes boundary-scan support and hot-pluggable interfaces. These features support field configuration, boundary-scan examination, and production test, but the programming file must use a device-compatible programming algorithm and correctly match the selected XC9536XL package and architecture.
Where to buy XC9536XL-10VQ64I online?
Use the Request a Quote form on this page to request XC9536XL-10VQ64I availability, minimum order quantity, and lead time. The exact ordered part is the AMD/Xilinx 64-pin VQFP industrial-temperature variant. Because this is an older programmable-logic product, procurement should confirm lifecycle status, original packaging, date codes, and authorized traceability. A quotation request allows these production controls to be matched to the project requirements.
What is the price of XC9536XL-10VQ64I?
Current XC9536XL-10VQ64I pricing depends on quantity, condition, packaging, and market availability. Submit the Request a Quote form on this page with the required quantity and target package or tape-and-reel condition. The quote request should also state whether factory-sealed parts, date-code controls, or programming documentation are required. This avoids relying on an outdated market listing for an obsolete programmable-logic component.
What is the lead time for XC9536XL-10VQ64I?
The current lead time for XC9536XL-10VQ64I should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, original packaging, date code, and supply status. For an obsolete CPLD, request factory-sealed stock, a manufacturing traceability record, and a written statement of storage history. These details are especially important when the component must support maintenance of equipment designed around the XC9500XL family.
Is XC9536XL-10VQ64I in stock?
Stock for XC9536XL-10VQ64I should be checked through the Request a Quote form on this page, where quantity and condition requirements can be specified. The target is a 64-pin VQFP industrial-temperature ordering variant, and not every inventory listing represents the same package or suffix code. For production continuity, request confirmed stock, date-code information, and traceability rather than relying on an unverified availability statement.
When should I choose XC9536XL-10VQ64I over a faster XC9500XL option?
Choose XC9536XL-10VQ64I when 36 macrocells, 36 I/O, and the -10 timing grade are sufficient and the design requires the 64-pin VQFP configuration. A faster XC9536XL-7VQ64I can provide additional timing margin for more demanding paths. According to AMD DS058, both are members of the same high-performance XC9500XL family, so selection should follow interface timing, thermal requirements, qualification status, and the exact ordering suffix.
Is the XC9536XL-10VQ64I RoHS compliant?
The XC9536XL-10VQ64I ordering variant is identified as RoHS non-compliant and containing lead in the device specification. Compliance status must be considered during new-product design, particularly where EU RoHS requirements apply. A different XC9536XL suffix may represent a different package, speed grade, or temperature grade, but it should not be assumed to resolve material compliance. Request current material and documentation information for the exact proposed replacement.
What is the best AMD XC9500XL replacement for XC9536XL-10VQ64I?
The best AMD-family replacement depends on whether priority is speed, temperature grade, or commercial qualification. XC9536XL-7VQ64I offers a faster grade, XC9536XL-10VQG64I is an explicitly indexed package-family option, and XC9536XL-10VQ64C is a commercial-grade alternative in the same ordering family. According to AMD DS058, confirm each suffix combination against the ordering information before declaring a part a drop-in replacement.

Engineering reference data for XC9536XL-10VQ64I — comparison, design guidance, and compliance information.

Selection Guide

Choose the XC9536XL-10VQ64I when an existing design requires the exact 36-macrocell, 36-I/O XC9500XL configuration in a 64-pin VQFP, a 3.3 V core supply, and industrial-temperature ordering. Select XC9536XL-7VQ64I when the board layout is compatible and additional timing margin is useful. Select XC9536XL-10VQG64I or XC9536XL-10VQG64C when their package code and temperature grade satisfy the mechanical and environmental requirements. Use XC9536XL-10VQ64C only when commercial-temperature operation is acceptable. Cross-manufacturer CPLDs should be treated as redesign candidates unless their exact package, pinout, macrocell allocation, voltage limits, and configuration file compatibility are independently proven. For any substitution, verify the complete ordering code, pin table, timing limits, operating-temperature range, and programming procedure against AMD datasheet DS058.

Comparison with Alternatives

Parameter This Product XC9536XL-7VQ64I XC9536XL-10VQG64I XC9536XL-10VQG64C XC9536XL-10VQ64C XC9536XL-7VQG64C
Brand AMD AMD AMD AMD AMD AMD
Package 64-pin VQFP, 10 mm × 10 mm 64-pin VQFP 64-pin VQFP 64-pin VQFP 64-pin VQFP 64-pin VQFP
Device Family XC9500XL XC9500XL XC9500XL XC9500XL XC9500XL XC9500XL
Number of Macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells 36 macrocells
Number of User I/O 36 I/O 36 I/O 36 I/O 36 I/O 36 I/O 36 I/O
Core Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Speed Grade -10 -7 -10 -10 -10 -7
Temperature Grade Industrial (I suffix) Industrial (I suffix) Industrial (I suffix) Commercial (C suffix) Commercial (C suffix) Commercial (C suffix)
System Frequency 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz
Input Tolerance 5 V, 3.3 V, and 2.5 V inputs 5 V, 3.3 V, and 2.5 V inputs 5 V, 3.3 V, and 2.5 V inputs 5 V, 3.3 V, and 2.5 V inputs 5 V, 3.3 V, and 2.5 V inputs 5 V, 3.3 V, and 2.5 V inputs

Key Differentiators

  • Exact industrial-temperature ordering option (vs XC9536XL-10VQ64C)
  • Direct timing option for design margin (vs XC9536XL-7VQ64I)
  • Package-code continuity within the same device family (vs XC9536XL-10VQG64I)
  • Avoids reliance on unverified cross-manufacturer footprint compatibility (vs ATF1502AS-10)

Design Notes

Place the manufacturer-recommended bypass capacitors adjacent to the XC9500XL supply and ground pins. Because this CPLD supports 5 V-tolerant inputs but operates from a 3.3 V core supply, keep the VCC rails clean and separate from externally powered input paths. Check the power-up and power-down limits in AMD datasheet DS058 before using hot-plug capability, especially when an attached circuit can drive a pin while the CPLD supply is changing.

Preserve the 64-pin VQFP land pattern and verify the package code before authorizing a replacement. Q and G package-code alternatives appear in the XC9536XL ordering family, but the land pattern, pin assignments, and exposed thermal or electrical details must match the assembled PCB. Confirm pin 1 orientation in the package drawing and use the manufacturer pin-description table for every board net assignment.

Route clock, address, and control paths directly, keeping stubs short and providing continuous ground references beneath signal traces. The device includes input hysteresis and bus hold, which assist signal integrity but do not remove the need for correct rise-time, loading, and topology analysis. Use the timing model and worst-case external delay values in DS058 when constraining setup and hold requirements for paths entering or leaving the CPLD.

Do not treat an I suffix and a C suffix as interchangeable without checking ambient-temperature requirements. Likewise, selecting the -7 grade can change timing characteristics and programming-file validation assumptions. Before substitution, compare the full ordering code, operating-temperature grade, package drawing, pin table, supply voltage, and I/O voltage conditions. Broader CPLD equivalents from other manufacturers require a complete PCB, logic, and programming-tool review rather than a footprint-only comparison.

Compliance Information

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
No
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact XC9536XL-10VQ64I ordering variant is identified as RoHS non-compliant and containing lead. REACH, halogen-free, and conflict-minerals status are unknown.

Related Searches

xc9536xl datasheet xc9536xl pinout xc9536xl 10vqg44c xc9536xl 10vqg44i xc9536xl 7vqg44c XC9536XL-10VQ64I datasheet XC9536XL-10VQ64I pinout XC9536XL-10VQ64I equivalent XC9536XL-10VQ64I replacement XC9536XL-10VQ64I vs XC9536XL-7VQ64I AMD XC9536XL-10VQ64I XC9536XL-10VQ64I 64-pin VQFP XC9536XL-10VQ64I industrial control XC9536XL-10VQ64I price

Related Components & Terms

AMD Xilinx XC9536XL-10VQ64I XC9536XL-7VQ64I XC9536XL-10VQG64I XC9536XL-10VQG64C XC9536XL-10VQ64C XC9536XL-7VQG64C XC9500XL complex programmable logic device CPLD programmable logic device semiconductor 36 macrocells 36 user I/O 64-pin VQFP VQFP package family surface-mount package 3.3 V core supply 5 V-tolerant input in-system programming bus hold input hysteresis boundary scan industrial control telecommunications interface
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details