Infineon

XMC4700F100K1536AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon

MPN: XMC4700F100K1536AAXQMA1 ✓ نشط
PG-LQFP-100 Package 144 MHz Speed 1.536 MB (1536 kB) Memory
الحد الأدنى للطلب: 1 |

XMC4700F100K1536AAXQMA1 نظرة عامة

The Infineon Technologies XMC4700F100K1536AAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating up to 144 MHz with 1.5 MB of embedded flash, 276 kB of SRAM, and integrated Ethernet connectivity. It is supplied in a 100-pin PG-LQFP package for industrial embedded-control designs.

A microcontroller is a programmable semiconductor integrating a processor core, memory, peripherals, and communication interfaces on one device. The XMC4000 family belongs to the industrial embedded-control hierarchy, combining real-time processing with DSP and floating-point capabilities. This makes the XMC4700 suitable when a design requires deterministic control, network communication, mixed-signal acquisition, timer and PWM control, or a combination of these functions.

Principal device characteristics include an ARM Cortex-M4 processor core, 32-bit architecture, 144 MHz maximum operating frequency, 1.536 MB of flash memory, and 276 kB of SRAM. The ordering designation identifies an industrial-grade XMC4700 configuration in a 100-pin LQFP package. Integrated Ethernet allows the controller to participate directly in connected industrial equipment without requiring a separate network interface.

The XMC4700 architecture supports embedded control workloads requiring both real-time peripheral handling and higher-level protocol processing. Its substantial flash capacity allows larger control firmware, communication stacks, and application logic to be consolidated into one component, while SRAM supports active control loops, packet buffers, and working memory. The 144 MHz Cortex-M4 core includes DSP-oriented instruction support and FPU capability according to the family description.

Typical applications include industrial Ethernet controllers, motor and power-conversion control, factory automation equipment, industrial networking gateways, and connected embedded-control systems. The combination of Ethernet, mixed-signal acquisition capability, timer/PWM resources, and ample program memory is particularly useful in systems that must coordinate sensing, communications, and real-time actuation.

Board design must account for the 100-pin LQFP footprint, exposed-pad thermal requirements, power-supply sequencing, high-speed signal integrity, and the pin multiplexing supported by the device. Firmware should be built against the exact XMC4700 headers and peripheral configuration rather than assuming that a generic Cortex-M4 pinout applies.

This page combines the manufacturer device description, exact ordering information, source-document links, application guidance, and available family comparisons. It also identifies which alternatives preserve the package and ordering family, helping engineers distinguish true PCB-compatible options from devices that merely offer similar processing performance.

بدائل مباشرة لـ XMC4700F100K1536AAXQMA1 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع XMC4700F100K1536AAXQMA1 (نفس عامل الشكل والبصمة) — يختلف في Flash Organization, Package, SRAM.

Infineon
Flash Organization: 2M x 8 bits
Package: PG-LQFP-100 with exposed pad
SRAM: 352 kB
قارن مع XMC4700F100K1536AAXQMA1 →

XMC4700F100F1536AAXQMA1

✅ بديل مباشر
📦 PG-LQFP-100
Flash remains 1536 kB; the F-versus-K ordering-code difference must be checked against the Infineon ordering table before substitution

📋 بديل مرجعي (غير موجود في الكتالوج)

XMC4700F100K2048AAXQMA1

✅ بديل مباشر
Infineon
📦 PG-LQFP-100
32-bit industrial microcontroller · Arm Cortex-M4 · 144 MHz · 32-bit ARM · 2048 kB (2 Mbit) · 2M x 8 bits · 352 kB · Integrated Ethernet

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XMC4700F100K1536AAXUMA1

✅ بديل مباشر
📦 PG-LQFP-100
Flash remains 1536 kB; the X-versus-Q ordering-code difference must be confirmed from the manufacturer ordering table

📋 بديل مرجعي (غير موجود في الكتالوج)

XMC4700F100K1536AAXQMA1 الحدود القصوى والخصائص الكهربائية

Product Type 32-bit industrial microcontroller
Product Family XMC4000
Processor Core ARM Cortex-M4
Architecture 32-bit
Maximum CPU Frequency 144 MHz
Flash Memory 1.536 MB (1536 kB)
Flash Organization 1.536 M x 8 bits
SRAM 276 kB
Ethernet Connectivity Integrated
Mixed-Signal Acquisition Supported
Timer and PWM Control Supported
DSP Capability Supported by ARM Cortex-M4 core
FPU Capability Supported by ARM Cortex-M4 core
العلبة PG-LQFP-100
Package Pin Count 100 pins
Temperature Grade Industrial, -25°C to +85°C
نوع التركيب Surface mount

دليل تكوين أطراف XMC4700F100K1536AAXQMA1 100 pins

تكوين الأطراف لـ XMC4700F100K1536AAXQMA1 (حزمة 100 pins). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة 100 pins لـ XMC4700F100K1536AAXQMA1

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XMC4700F100K1536AAXQMA1.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

XMC4700F100K1536AAXQMA1 مناسب لـ 6 التطبيقs: Industrial Ethernet Control, Motor and Power-Control Systems, Factory Automation Equipment, Connected Sensor Hubs, Building and HVAC Automation, Robotics and Precision Motion Control.

🌐

Industrial Ethernet Control

The Infineon XMC4700F100K1536AAXQMA1 fits connected industrial controllers because it combines an ARM Cortex-M4 core operating up to 144 MHz with integrated Ethernet. The processor can execute real-time control logic while the Ethernet interface supports network communication, reducing the need for a separate interface device in constrained equipment. Its 1536 kB of flash can accommodate an Ethernet stack, control firmware, diagnostics, and configuration data, while 276 kB of SRAM provides working memory for protocol and application tasks. Engineers should allocate the PHY, magnetics, clock, and termination network according to the Infineon reference design and validate timing margins against the selected Ethernet topology.

⚡

Motor and Power-Control Systems

The XMC4700F100K1536AAXQMA1 is appropriate for motor-control and power-conversion systems that require faster control-loop execution than a basic 8-bit or low-frequency MCU provides. At up to 144 MHz, the Cortex-M4 core can service timer and PWM functions while executing supporting control algorithms. DSP instruction support and FPU capability are valuable for filtering, transformations, and other numerical workloads. The industrial -25°C to +85°C temperature range supports factory equipment, but the final design must include appropriate gate drivers, current sensing, protection, and power-stage layout.

🏭

Factory Automation Equipment

The Infineon XMC4700F100K1536AAXQMA1 can serve as the central controller in factory automation equipment combining sensor acquisition, timing functions, communications, and actuator control. Mixed-signal acquisition capability supports connections to analog measurement chains, while timer/PWM resources can drive indicators, valves, or motor-control interfaces. The 1536 kB flash and 276 kB SRAM allow a meaningful industrial application and network stack to be consolidated without an external memory device. Design engineers should partition deterministic timing carefully, provide clean analog and digital supplies, and validate isolation, grounding, and surge requirements for the target factory environment.

🧩

Connected Sensor Hubs

The XMC4700F100K1536AAXQMA1 is suitable for a connected sensor hub that must acquire process measurements, run local filtering, and forward results over Ethernet. Its mixed-signal acquisition resources reduce the need for separate data-conversion circuitry in suitable designs, while the 144 MHz Cortex-M4 core provides processing headroom for digital filtering and protocol handling. The 276 kB SRAM can support buffering and communication workloads, and 1536 kB of flash can hold firmware and configuration data. Engineers must check analog input ranges, acquisition timing, sensor excitation noise, and calibration strategy against the electrical characteristics in the manufacturer datasheet.

🏭

Building and HVAC Automation

The XMC4700F100K1536AAXQMA1 can coordinate HVAC equipment, building controllers, and networked actuators that require real-time peripheral handling plus Ethernet communications. Its 32-bit Cortex-M4 core supports multitasking among control loops, communications, diagnostics, and configuration updates. The 1.536 MB flash capacity is useful for application firmware, network stacks, and logging logic, while the 276 kB SRAM supports active control and communication buffering. For deployment in electrically noisy environments, include appropriate input filtering, surge protection, watchdog strategy, and safe-state behavior for actuators when communications or sensor data become invalid.

⚙️

Robotics and Precision Motion Control

The XMC4700F100K1536AAXQMA1 offers the processing throughput needed for robotics or precision motion-control nodes that coordinate timing, communications, and feedback processing. The 144 MHz Cortex-M4 core can execute control algorithms while timer and PWM resources generate deterministic outputs, and integrated Ethernet supports communication with a broader machine network. DSP and FPU capabilities can accelerate numerical filtering or transform operations when the firmware workload requires them. Board-level implementation still requires careful partitioning between motor power stages and sensitive controller signals, along with defined shutdown behavior for communication faults and sensor exceptions.

ملخص المنتجات الموصى بها

XMC4700-F100K1536-AA Manufacturer industrial ordering designation for the XMC4700 configuration يُستخدم في: Industrial Ethernet Control, Motor and Power-Control Systems, Factory Automation Equipment, Connected Sensor Hubs, Building and HVAC Automation, Robotics and Precision Motion Control XMC4700F100K1536AAXQMA1 Infineon يُستخدم في: Industrial Ethernet Control, Motor and Power-Control Systems, Factory Automation Equipment, Connected Sensor Hubs, Building and HVAC Automation, Robotics and Precision Motion Control
What is the XMC4700F100K1536AAXQMA1?
The XMC4700F100K1536AAXQMA1 is an Infineon Technologies industrial 32-bit microcontroller based on the ARM Cortex-M4 core. It operates at up to 144 MHz and integrates 1.536 MB of flash, 276 kB of SRAM, and Ethernet connectivity in a PG-LQFP-100 package. The Infineon product page identifies the device as part of the XMC4000 family, while the family datasheet documents its superset functionality and derivative-device characteristics.
What are the key specifications of XMC4700F100K1536AAXQMA1?
The principal specifications are a 32-bit ARM Cortex-M4 processor, 144 MHz maximum operating frequency, 1.536 MB of flash, 276 kB of SRAM, integrated Ethernet, and a 100-pin PG-LQFP package. The Infineon manufacturer description also identifies mixed-signal acquisition and timer/PWM control as important device capabilities. These figures place the part in the industrial XMC4000 embedded-control family and make it suitable for connected real-time control systems.
How much flash and SRAM does the XMC4700F100K1536AAXQMA1 have?
The XMC4700F100K1536AAXQMA1 provides 1536 kB, or 1.536 MB, of flash memory and 276 kB of SRAM. The flash is listed in an x8 organization, allowing firmware, communication stacks, calibration data, and application logic to reside in the same controller. According to the Infineon product description and the XMC4700/XMC4800 datasheet, this memory combination supports larger embedded-control and networking workloads.
What is the maximum operating frequency of XMC4700F100K1536AAXQMA1?
The maximum operating frequency of the XMC4700F100K1536AAXQMA1 is 144 MHz. Infineon describes the XMC4700 as a 32-bit ARM Cortex-M4 industrial microcontroller, and the distributor listing identifies the same 144 MHz operating rate. This frequency provides additional processing margin for Ethernet protocol handling, control algorithms, digital signal processing, and real-time peripheral coordination compared with lower-frequency embedded controllers.
Where can I download the XMC4700F100K1536AAXQMA1 datasheet PDF?
The official XMC4700/XMC4800 datasheet PDF is available from the Infineon document link on this page. It describes the superset device functionality, electrical characteristics, ordering designations, and differences among derivative devices. For firmware-level details, use the official XMC4700/XMC4800 reference manual; check its errata documentation for deviations from the superset specifications before finalizing a production design.
Where can I find the XMC4700F100K1536AAXQMA1 pinout?
Use the pin-description tables and package drawings in the official Infineon XMC4700/XMC4800 datasheet and reference manual to locate every XMC4700F100K1536AAXQMA1 pin. The device uses the PG-LQFP-100 package, but pin functions can vary with alternate-function and peripheral configurations. Assign PCB tracks directly from the manufacturer pin table rather than relying on a generic 100-pin MCU symbol or an unverified diagram.
Does the XMC4700F100K1536AAXQMA1 support Ethernet?
Yes, the XMC4700F100K1536AAXQMA1 includes Ethernet connectivity as part of the XMC4700 feature set. Infineon identifies Ethernet alongside 1536 kB of flash and 276 kB of SRAM in its product description. This integration is useful for industrial gateways, networked automation controllers, and embedded Ethernet equipment because the controller can handle network communication and real-time application processing in one package.
Is the XMC4700F100K1536AAXQMA1 suitable for industrial control?
The XMC4700F100K1536AAXQMA1 is specifically identified as an industrial microcontroller and is temperature-rated from -25°C to +85°C. Its 144 MHz ARM Cortex-M4 core, mixed-signal acquisition capability, timer/PWM control, and integrated Ethernet support real-time industrial control and connected equipment. The final design must still satisfy the device-specific electrical, layout, and safety requirements stated in the Infineon documentation.
What can replace the XMC4700F100K1536AAXQMA1?
The closest documented PCB-oriented replacements are XMC4700F100F1536AAXQMA1 and XMC4700F100K2048AAXQMA1, both from Infineon Technologies and both associated with the XMC4700 family. Their order codes identify parameter or package-code differences that must be reviewed before substitution. Firmware, peripheral configuration, memory requirements, temperature range, and exposed-pad details should all be checked against the manufacturer datasheet.
Can XMC4700F100F1536AAXQMA1 replace XMC4700F100K1536AAXQMA1?
The XMC4700F100F1536AAXQMA1 is a potential same-family replacement, but it should not be treated as automatically identical to the XMC4700F100K1536AAXQMA1. Both order codes contain 1536 kB of flash, while the F-versus-K designation changes an ordering parameter whose exact meaning must be confirmed in the Infineon ordering table. Verify package, pin functions, temperature grade, and firmware implications before approving the substitution.
When should I choose the XMC4700F100K1536AAXQMA1 over the 2048 kB variant?
Choose the XMC4700F100K1536AAXQMA1 when 1536 kB of flash is sufficient and the exact ordering configuration is preferable for an existing industrial design. The XMC4700F100K2048AAXQMA1 provides 2048 kB of flash, an increase of 512 kB or approximately 33.3%, which can help when firmware, networking stacks, or logging require additional program space. Confirm that the remaining electrical and ordering parameters are unchanged before substitution.
Is XMC4700F100K1536AAXQMA1 the same as XMC4800F100F1024AAXQMA1?
No, the XMC4800F100F1024AAXQMA1 is not an interchangeable substitute for the XMC4700F100K1536AAXQMA1. The XMC4800 has 1024 kB of flash rather than 1536 kB, and it belongs to the XMC4800 rather than XMC4700 family. Although both listings use a 100-pin LQFP-style package, firmware support, peripheral resources, and device-specific pin functions must be checked before considering any board-level exchange.
What is the best drop-in replacement for XMC4700F100K1536AAXQMA1?
No cross-manufacturer drop-in replacement is established by the available cross-reference material. The closest candidates are Infineon XMC4700F100F1536AAXQMA1 and XMC4700F100K2048AAXQMA1, but their order-code differences require verification against the Infineon ordering information. Do not select a generic 144 MHz Cortex-M4 MCU solely by matching the package; peripheral mapping, Ethernet integration, memory, and exposed-pad requirements make pin compatibility essential.
Where can I buy the XMC4700F100K1536AAXQMA1 and check lead time?
Use the Request a Quote form on this page to ask for XMC4700F100K1536AAXQMA1 availability, current lead time, and the required package or shipping configuration. The manufacturer lists the XMC4700-F100K1536-AA industrial configuration, and distributor listings identify the exact order code as an ARM Cortex-M4 XMC4000 microcontroller. A quotation request allows production quantity and logistics requirements to be confirmed without relying on stale catalog availability.
What is the price of the XMC4700F100K1536AAXQMA1?
Use the Request a Quote form on this page for the current unit price, quantity breaks, stock status, and lead time for the XMC4700F100K1536AAXQMA1. Commercial terms can change with order quantity, package, delivery date, and supply conditions, so the structured offer should be used for purchasing decisions. The exact industrial order code and required production quantity should be stated in the request.

بيانات مرجعية هندسية لـ XMC4700F100K1536AAXQMA1 — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the XMC4700F100K1536AAXQMA1 when an industrial embedded system needs a 144 MHz ARM Cortex-M4 controller with 1536 kB of flash, 276 kB of SRAM, integrated Ethernet, mixed-signal acquisition, and timer/PWM support in a PG-LQFP-100 package. Select XMC4700F100K2048AAXQMA1 when the same family and package are suitable but firmware or logging needs 512 kB more flash. Consider XMC4700F100F1536AAXQMA1 only after confirming the F-versus-K ordering parameter in the manufacturer ordering table. Use XMC4700F100K1536AAXUMA1 only when its exact ordering attributes and sourcing conditions match the design. A generic Cortex-M4 MCU should not be selected as a drop-in replacement merely because its pin count and package match; Ethernet peripheral resources, pin multiplexing, memory map, clocking, and exposed-pad requirements must all be reconciled first.

المقارنة مع البدائل

المعامل هذا المنتج XMC4700F100F1536AAXQMA1 XMC4700F100K2048AAXQMA1 XMC4700F100K1536AAXUMA1
Package PG-LQFP-100 PG-LQFP-100 PG-LQFP-100 PG-LQFP-100
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Product Family XMC4700 / XMC4000 XMC4700 / XMC4000 XMC4700 / XMC4000 XMC4700 / XMC4000
Processor Core ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4 ARM Cortex-M4
Maximum CPU Frequency 144 MHz 144 MHz 144 MHz 144 MHz
Flash Memory 1536 kB 1536 kB 2048 kB 1536 kB
Architecture 32-bit 32-bit 32-bit 32-bit
Industrial Temperature Range -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C

أبرز الفروقات

  • Larger flash option exists within the same XMC4700 ordering structure (مقابلXMC4700F100K2048AAXQMA1)
  • Target provides 144 MHz Cortex-M4 processing with integrated Ethernet (مقابلXMC4700F100F1536AAXQMA1)
  • Exact ordering-code availability for board sourcing (مقابلXMC4700F100K1536AAXUMA1)

ملاحظات التصميم

Use the manufacturer package drawing and pin-description tables as the authority for the PG-LQFP-100 land pattern, exposed-pad connection, and pin numbering. Place decoupling capacitors close to the associated supply pins, keep the exposed-pad thermal path free of restrictive keepout areas, and follow the recommended analog and digital return-current arrangement. Because the XMC4700 integrates Ethernet and mixed-signal functions, separate noisy switching returns from sensitive analog grounds where the reference design permits it.

Confirm every supply rail, sequencing requirement, and operating condition from the exact device electrical tables before powering the board. Do not infer supply values from the CPU frequency or package designation. Use low-ESR local decoupling, provide clean startup behavior, and validate power-supply settling at the maximum expected Ethernet, analog, and digital load. Review brownout and reset behavior in firmware so partially initialized peripherals cannot create unsafe outputs after a power interruption.

Route Ethernet differential pairs as a controlled impedance pair with continuous reference-plane support and minimize discontinuities, stubs, and unnecessary vias. Keep the Ethernet PHY and magnetics interface placement consistent with the Infineon reference layout, and observe the required clock and signal clearances. If the board includes analog acquisition channels, use controlled routing away from switching nodes and Ethernet circuitry, then validate crosstalk, reference-noise coupling, and acquisition timing on production hardware.

The XMC4700F100F1536AAXQMA1, XMC4700F100K2048AAXQMA1, and XMC4700F100K1536AAXUMA1 may appear similar in a search result, but their ordering codes must be decoded against the Infineon ordering table. Confirm flash capacity, temperature range, package code, tape-and-reel orientation, and exposed-pad requirements before release. Also ensure the firmware, boot configuration, linker memory map, and device headers are updated whenever the flash configuration changes.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The manufacturer identifies this as an industrial microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the product material used for this record. AEC-Q100 is not applicable to this industrial-grade ordering configuration.

تم التحقق من البيانات في: 2026-11-16 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

XMC4700F100K1536AAXQMA1 datasheet XMC4700F100K1536AAXQMA1 specifications XMC4700F100K1536AAXQMA1 pinout XMC4700F100K1536AAXQMA1 datasheet pdf XMC4700F100K1536AAXQMA1 equivalent XMC4700F100K1536AAXQMA1 replacement XMC4700F100K1536AAXQMA1 cross reference XMC4700F100K1536AAXQMA1 footprint XMC4700F100K1536AAXQMA1 reference manual XMC4700F100K1536AAXQMA1 programming XMC4700F100K1536AAXQMA1 vs XMC4700F100K2048AAXQMA1 XMC4700F100K1536AAXQMA1 price Infineon XMC4700F100K1536AAXQMA1 XMC4700F100K1536AAXQMA1 LQFP-100 pinout XMC4700F100K1536AAXQMA1 industrial Ethernet controller

المكونات والمصطلحات ذات الصلة

Infineon Technologies XMC4700F100K1536AAXQMA1 XMC4700-F100K1536-AA XMC4700F100F1536AAXQMA1 XMC4700F100K2048AAXQMA1 XMC4700F100K1536AAXUMA1 XMC4800F100F1024AAXQMA1 ARM Cortex-M4 XMC4000 family XMC4700 microcontroller 32-bit microcontroller industrial microcontroller embedded control microcontroller semiconductor integrated circuit mixed-signal acquisition industrial Ethernet timer and PWM control digital signal processing floating-point unit 1536 kB flash memory 276 kB SRAM 144 MHz PG-LQFP-100 LQFP package family surface-mount package
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر