XMC4700F100K1536AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
부품 번호: XMC4700F100K1536AAXQMA1 ✓ 활성XMC4700F100K1536AAXQMA1 개요
A microcontroller is a programmable semiconductor integrating a processor core, memory, peripherals, and communication interfaces on one device. The XMC4000 family belongs to the industrial embedded-control hierarchy, combining real-time processing with DSP and floating-point capabilities. This makes the XMC4700 suitable when a design requires deterministic control, network communication, mixed-signal acquisition, timer and PWM control, or a combination of these functions.
Principal device characteristics include an ARM Cortex-M4 processor core, 32-bit architecture, 144 MHz maximum operating frequency, 1.536 MB of flash memory, and 276 kB of SRAM. The ordering designation identifies an industrial-grade XMC4700 configuration in a 100-pin LQFP package. Integrated Ethernet allows the controller to participate directly in connected industrial equipment without requiring a separate network interface.
The XMC4700 architecture supports embedded control workloads requiring both real-time peripheral handling and higher-level protocol processing. Its substantial flash capacity allows larger control firmware, communication stacks, and application logic to be consolidated into one component, while SRAM supports active control loops, packet buffers, and working memory. The 144 MHz Cortex-M4 core includes DSP-oriented instruction support and FPU capability according to the family description.
Typical applications include industrial Ethernet controllers, motor and power-conversion control, factory automation equipment, industrial networking gateways, and connected embedded-control systems. The combination of Ethernet, mixed-signal acquisition capability, timer/PWM resources, and ample program memory is particularly useful in systems that must coordinate sensing, communications, and real-time actuation.
Board design must account for the 100-pin LQFP footprint, exposed-pad thermal requirements, power-supply sequencing, high-speed signal integrity, and the pin multiplexing supported by the device. Firmware should be built against the exact XMC4700 headers and peripheral configuration rather than assuming that a generic Cortex-M4 pinout applies.
This page combines the manufacturer device description, exact ordering information, source-document links, application guidance, and available family comparisons. It also identifies which alternatives preserve the package and ordering family, helping engineers distinguish true PCB-compatible options from devices that merely offer similar processing performance.
드롭인 대체품: XMC4700F100K1536AAXQMA1 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: XMC4700F100K1536AAXQMA1 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Organization, Package, SRAM.
XMC4700F100F1536AAXQMA1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4700F100K2048AAXQMA1
✅ 드롭인가격 문의
데이터시트 보기 →XMC4700F100K1536AAXUMA1
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4700F100K1536AAXQMA1 최대 정격 & 전기적 특성
| Product Type | 32-bit industrial microcontroller |
| Product Family | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| Architecture | 32-bit |
| Maximum CPU Frequency | 144 MHz |
| Flash Memory | 1.536 MB (1536 kB) |
| Flash Organization | 1.536 M x 8 bits |
| SRAM | 276 kB |
| Ethernet Connectivity | Integrated |
| Mixed-Signal Acquisition | Supported |
| Timer and PWM Control | Supported |
| DSP Capability | Supported by ARM Cortex-M4 core |
| FPU Capability | Supported by ARM Cortex-M4 core |
| 패키지 | PG-LQFP-100 |
| Package Pin Count | 100 pins |
| Temperature Grade | Industrial, -25°C to +85°C |
| 실장 유형 | Surface mount |
XMC4700F100K1536AAXQMA1 100 pins 핀 구성 가이드
XMC4700F100K1536AAXQMA1(100 pins 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC4700F100K1536AAXQMA1.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC4700F100K1536AAXQMA1 적합 용도: 6 애플리케이션s: Industrial Ethernet Control, Motor and Power-Control Systems, Factory Automation Equipment, Connected Sensor Hubs, Building and HVAC Automation, Robotics and Precision Motion Control.
Industrial Ethernet Control
The Infineon XMC4700F100K1536AAXQMA1 fits connected industrial controllers because it combines an ARM Cortex-M4 core operating up to 144 MHz with integrated Ethernet. The processor can execute real-time control logic while the Ethernet interface supports network communication, reducing the need for a separate interface device in constrained equipment. Its 1536 kB of flash can accommodate an Ethernet stack, control firmware, diagnostics, and configuration data, while 276 kB of SRAM provides working memory for protocol and application tasks. Engineers should allocate the PHY, magnetics, clock, and termination network according to the Infineon reference design and validate timing margins against the selected Ethernet topology.
추천
Motor and Power-Control Systems
The XMC4700F100K1536AAXQMA1 is appropriate for motor-control and power-conversion systems that require faster control-loop execution than a basic 8-bit or low-frequency MCU provides. At up to 144 MHz, the Cortex-M4 core can service timer and PWM functions while executing supporting control algorithms. DSP instruction support and FPU capability are valuable for filtering, transformations, and other numerical workloads. The industrial -25°C to +85°C temperature range supports factory equipment, but the final design must include appropriate gate drivers, current sensing, protection, and power-stage layout.
추천
Factory Automation Equipment
The Infineon XMC4700F100K1536AAXQMA1 can serve as the central controller in factory automation equipment combining sensor acquisition, timing functions, communications, and actuator control. Mixed-signal acquisition capability supports connections to analog measurement chains, while timer/PWM resources can drive indicators, valves, or motor-control interfaces. The 1536 kB flash and 276 kB SRAM allow a meaningful industrial application and network stack to be consolidated without an external memory device. Design engineers should partition deterministic timing carefully, provide clean analog and digital supplies, and validate isolation, grounding, and surge requirements for the target factory environment.
추천
Connected Sensor Hubs
The XMC4700F100K1536AAXQMA1 is suitable for a connected sensor hub that must acquire process measurements, run local filtering, and forward results over Ethernet. Its mixed-signal acquisition resources reduce the need for separate data-conversion circuitry in suitable designs, while the 144 MHz Cortex-M4 core provides processing headroom for digital filtering and protocol handling. The 276 kB SRAM can support buffering and communication workloads, and 1536 kB of flash can hold firmware and configuration data. Engineers must check analog input ranges, acquisition timing, sensor excitation noise, and calibration strategy against the electrical characteristics in the manufacturer datasheet.
추천
Building and HVAC Automation
The XMC4700F100K1536AAXQMA1 can coordinate HVAC equipment, building controllers, and networked actuators that require real-time peripheral handling plus Ethernet communications. Its 32-bit Cortex-M4 core supports multitasking among control loops, communications, diagnostics, and configuration updates. The 1.536 MB flash capacity is useful for application firmware, network stacks, and logging logic, while the 276 kB SRAM supports active control and communication buffering. For deployment in electrically noisy environments, include appropriate input filtering, surge protection, watchdog strategy, and safe-state behavior for actuators when communications or sensor data become invalid.
추천
Robotics and Precision Motion Control
The XMC4700F100K1536AAXQMA1 offers the processing throughput needed for robotics or precision motion-control nodes that coordinate timing, communications, and feedback processing. The 144 MHz Cortex-M4 core can execute control algorithms while timer and PWM resources generate deterministic outputs, and integrated Ethernet supports communication with a broader machine network. DSP and FPU capabilities can accelerate numerical filtering or transform operations when the firmware workload requires them. Board-level implementation still requires careful partitioning between motor power stages and sensitive controller signals, along with defined shutdown behavior for communication faults and sensor exceptions.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC4700F100K1536AAXQMA1 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC4700F100F1536AAXQMA1 | XMC4700F100K2048AAXQMA1 | XMC4700F100K1536AAXUMA1 |
|---|---|---|---|---|
| Package | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Family | XMC4700 / XMC4000 | XMC4700 / XMC4000 | XMC4700 / XMC4000 | XMC4700 / XMC4000 |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 144 MHz | 144 MHz | 144 MHz | 144 MHz |
| Flash Memory | 1536 kB | 1536 kB | 2048 kB | 1536 kB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit |
| Industrial Temperature Range | -25°C to +85°C | -25°C to +85°C | -25°C to +85°C | -25°C to +85°C |
주요 차별점
- Larger flash option exists within the same XMC4700 ordering structure (vs XMC4700F100K2048AAXQMA1)
- Target provides 144 MHz Cortex-M4 processing with integrated Ethernet (vs XMC4700F100F1536AAXQMA1)
- Exact ordering-code availability for board sourcing (vs XMC4700F100K1536AAXUMA1)
설계 노트
Use the manufacturer package drawing and pin-description tables as the authority for the PG-LQFP-100 land pattern, exposed-pad connection, and pin numbering. Place decoupling capacitors close to the associated supply pins, keep the exposed-pad thermal path free of restrictive keepout areas, and follow the recommended analog and digital return-current arrangement. Because the XMC4700 integrates Ethernet and mixed-signal functions, separate noisy switching returns from sensitive analog grounds where the reference design permits it.
Confirm every supply rail, sequencing requirement, and operating condition from the exact device electrical tables before powering the board. Do not infer supply values from the CPU frequency or package designation. Use low-ESR local decoupling, provide clean startup behavior, and validate power-supply settling at the maximum expected Ethernet, analog, and digital load. Review brownout and reset behavior in firmware so partially initialized peripherals cannot create unsafe outputs after a power interruption.
Route Ethernet differential pairs as a controlled impedance pair with continuous reference-plane support and minimize discontinuities, stubs, and unnecessary vias. Keep the Ethernet PHY and magnetics interface placement consistent with the Infineon reference layout, and observe the required clock and signal clearances. If the board includes analog acquisition channels, use controlled routing away from switching nodes and Ethernet circuitry, then validate crosstalk, reference-noise coupling, and acquisition timing on production hardware.
The XMC4700F100F1536AAXQMA1, XMC4700F100K2048AAXQMA1, and XMC4700F100K1536AAXUMA1 may appear similar in a search result, but their ordering codes must be decoded against the Infineon ordering table. Confirm flash capacity, temperature range, package code, tape-and-reel orientation, and exposed-pad requirements before release. Also ensure the firmware, boot configuration, linker memory map, and device headers are updated whenever the flash configuration changes.
규정 준수 정보
The manufacturer identifies this as an industrial microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the product material used for this record. AEC-Q100 is not applicable to this industrial-grade ordering configuration.